Hi.
I have a OUKU P800 and works perfecto with both sims and everything. nonthheless the problem is that memory fills out to quikly. so i want to root it so I can get the posibility to encrease the rom memory.
It uses the 2.2.2 version.
Ive been reading about the "gingerbreak", the problem is that i dont know how to hard reset the phone in case it doesnt works.
Can anybody help me?
Thanks
Javier (form argentina)
javiermattera said:
Hi.
I have a OUKU P800 and works perfecto with both sims and everything. nonthheless the problem is that memory fills out to quikly. so i want to root it so I can get the posibility to encrease the rom memory.
It uses the 2.2.2 version.
Ive been reading about the "gingerbreak", the problem is that i dont know how to hard reset the phone in case it doesnt works.
Can anybody help me?
Thanks
Javier (form argentina)
Click to expand...
Click to collapse
Have you try holding the power, vol- , and home button while is off???
---------- Post added at 06:05 AM ---------- Previous post was at 06:00 AM ----------
Hi i got the Ouku P800w Got it for a week now and the phone just won't boot anymore... anyone know the problem?? i'm thinking that the phone have lost the android 2.2.2 in it thats why is not booting... if anyone know how to fix this please let me know
process com.android.setupwizard has stopped unexpectedly
Hello everyone, I had a very serious problem since last week with this ouku p800w and I don't know how to solve it..
My cell is rooted and have the android version 2.2.2.
Last week when I went to charge my smartphone and I powered on, has appeared this message:
""The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again"
And now I can't do anything, I see only the notifications bar and a black screen.
I don't know if this could be helpfull but i have these file (process com.android.setupwizard.tar.gz ; process com.android.setupwizard.apk.gz ; process com.android.setupwizard.properties) in a backup made by titanium.
Please I really need help I don't know what to do.
Thanks in advance.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
hey everyone this is my first post please i need help my phone became a black screen and i downloaded stock rom when i flash it it gives error 4032 dram failed
what should i do and if there any custom rom work for blu studio 5.5 d610 please help me i really appreciate any help
BLU Studio 5.5 Firmware
Here you go bro enjoy!
Tested and ready to go!
4shared.com/zip/AwAAKdcMba/BLU_D610A_RAR.html]BLU D610A RAR.zip
TYVM! This was something I was looking for to help a friend. His phone got this weird virus. Downloading things in the background - turning on his data when he turned it off. Hopefully this will help to wipe fully and flash it clean.
*EDIT*
It's now the 18th of the 8th. Gonna attempt it today at some point and post back the results. If it works, I'm going to upload it to somewhere else as well and provide links.
OK. So the reason for the double posting is to also bring up the thread. Basically the files I got here didn't work. I'm going to give a quick overview of what I did and provide more details later on. Along with a little bit of my own theories.
I think the D610a may have different versions. The ROM in the earlier post may work for some, but it didn't work for me at all. I ended up doing some searches and found another ROM elsewhere which worked for me. There were also some issues with the version of SP Flash Tool and I had to use the version provided from another forum (GSM Arena I think) which lead to this download.
http://www.mediafire.com/download/kz8klq5jzs8n859/Blu+Studio+5.5+Stock+ROM.rar
That's what worked for me. It comes with SP Flash Tool version 5.1436.0 - the required scatter file and other files. Once loaded everything worked. The only thing is it left me with invalid IMEI. This was fixed by following instructions here.
https://www.youtube.com/watch?v=qnJr7RQa2Kk
Which involved sending commands to the phone and rebooting. "AT +EGMR=1,7,”new-imei”” for SIM1 and "AT +EGMR=1,10,”new-imei”” for SIM2 I think it was.
As for the whole button presses when flashing - that didn't work in my case. Once I connected the phone it automatically started the download.
There was also a matter of the correct drivers.
http://www.blogtechtips.com/2015/03...phone-flash-tool-to-flash-any-blu-smartphone/
The link above has a lot of helpful stuff including the drivers. You need the MTK VCOM driver.
After that it worked fine.
Hopefully the additional info provided helps others.
*EDIT*
http://blog.catsinja.com/2016/08/blu-studio-5-5-de-brick-general-flashing/
Information that fixed the issue was located in the link below.
You'll love m3 bub
Dark2Dragon said:
hey everyone this is my first post please i need help my phone became a black screen and i downloaded stock rom when i flash it it gives error 4032 dram failed
what should i do and if there any custom rom work for blu studio 5.5 d610 please help me i really appreciate any help
Click to expand...
Click to collapse
Cm ROM for blu d610a cwm recovery and so much more just click the link and rub my balls lmao jk..fr tho the link will shock you for this phone in which no one finds ROMs for ROM FOUND
https://plus.google.com/115603116394448810059/posts/LhpPetbZoWh
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
Move my post to the main thread of this device someone please I been messing with phones since I was 12 am now 27 but xda posts I'm still not to jiggy with
---------- Post added at 11:56 AM ---------- Previous post was at 11:52 AM ----------
https://plus.google.com/117126665947588199302/posts/df9gUxNVonq
Is full page for the ROMs and recovery cwm touch recovery fully working btw
"My blu studio 5.5 d610a not on,Black screen.im installed wtrp than restart but not on the phone. Anybody help me,How to solve the problem"
Q&A for [ROM][UNOFFICIALLY][ CM11 For Huawei Ascend G620S]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIALLY][ CM11 For Huawei Ascend G620S]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello , there is a mistake in notifications com.systemui
Microphone sound is heard very little
otherwise I work well all
thanks
kingdom105 said:
Hello , there is a mistake in notifications com.systemui
Microphone sound is heard very little
otherwise I work well all
thanks
Click to expand...
Click to collapse
Hello !
Thanks for your feedback !
Did you wiped : Cache, Dalvik, System, Data before flashed CM11 ? - otherwise might be some issues with com.systemui !
I also found this problem with michrophone sound ...
Best regards !
Hello and thanks for your efforts on cm12.1!
What do you mean by partially working wifi?
I think 5.1 uses Art by default so my question is in this ROM which VM is active?
What about 64bit support?
Sent from my G620S-L01 using XDA Free mobile app
CM 12.1 Huawei Ascend G620S-L01
Hey i have Huawei Ascend G620S-L01 and i cannot flash this rom its throwing "Error executing updater binary in zip" message :/ ok i just copy paste updater-script file from other ROM and installed it
great job would be great to have mobile data before video
thank you!
Thank you, i installed your cm11 rom the other day and now i can say that i'm actually ok with my phone. before, it was really annoying, it was always stuck on something. but now...it just works. Thanks a lot, i hope you'll have the time to make an usable lollipop rom. This phone has like the same specs of new moto g 3rd gen released just a few days ago, so a lollipop rom should really work good on it.
Data network
hello surdu rom it works dianlujitao mobile data
because in your rom does not work?
Might suit
Regards.
---------- Post added at 02:53 PM ---------- Previous post was at 02:48 PM ----------
Data network
hello surdu rom it works dianlujitao mobile data
because in your rom does not work?
Might suit
Regards.
Calling
calling don't work?
G-7 L-01
Is compatible with G-7 L-01 ?
Bugs and updating
Will you contiune to update cm12.1? And please fix the bug(especially the data network),and I also find other bugs,for example,sometimes it wil be black screen.[/SIZE]
data network cyanogen12.1
hello surdu, the cm12.1 data network full funcionality rom dianlujitao
does not work your cm12.1 no mobile network??
this is implement mobile network dianlujitao this your rom please
regard.
Hi,
i've flashed my G620s with cm-12.1-20150801-UNOFFICIAL-g620s and everything looked fine untill i tested phone calls. Every call hangs at the end: "Hanging up" is flashing. No matter if i make the call or someone is calling me. THe only way to dismiss it is phone reboot. That bug makes this ROM unusable :/ Is there a way to fix it?
Does cm-11-20150620-UNOFFICIAL-g620s also has this bug? If not then i'm going to just flash CM11.
Regards
---------- Post added at 12:54 PM ---------- Previous post was at 11:57 AM ----------
Just to let you know - i've flashed CM11 and calls are hanged up with no problems
To topic author: Can I donate you?
Thanks Bro I Like It
kingroot and CyanogenMod 12.1 on huawei ascend g620s
.
Hi all !
..I'd like to install CyanogenMod 12.1 on my Huawei ascend g620s , its still unrooted , I sent an email to huawei asking for the unlock code for the bootloader but still havent got any reply so read about an alternative to root the phone .
Seen kingroot app and the phone is in the list of compatible devices so wondering can i use that app to root my phone or need however the unlock code ? ..if i can use the app can i install the ROM after root with king root and after TWRP installation ??
thx fro your time to answer
Hi could i install this rom for my Huawei G7-L01.
G620S-L01 totally crashing
First of all i must copy updater-script from dianlujitao ROM cus other way i cant install this rom, 2nd after last update every time i press call system stop working and restart, i was happy that finally someone made a lolipop for this device but as i can see its imposible to run it
Can i ask that will u upload update with working Network Data?
WiFi does not work...
Hello,
Sorry, but I do not work for me WiFi...
Does not search for any network, and as I leave the WiFi settings are automatically turned off (although the icon shows that WiFi is permanently disabled).
How do I fix this?
graciasss genio!! Tengo una pregunta:¿como puedo instalar xposed en esta rom?
graciasss genius !! I have a question: how I can install Xposed on this rom?
---------- Post added at 08:01 PM ---------- Previous post was at 07:56 PM ----------
graciasss genius !! I have a question: how I can install xposed on this rom ?
HOW DO YOU FIX FIRMWARE WIFI PROBLEM?
Hello ,I have a Irulu eXpro X7 (16GB) 7" tablet with andriod 4.4.2 kitkat.It has a locked bootloader with no root acess,and firmware v2.
Recently it was bricked and I found the firmware on the companys website it was for my device.I used phoiexcard 3.09 to flash the firmware
on my 8GB sdhc memory card.I flashed the firmware and everything seems to be fine:eg touchscreen.
But I found out that the Wi-Fi isnt working.It says to see avaible networks please turn on wifi.So I pressed turn on.But the problem is that
it keeps turning off.I searched google for answers but there was no help at all.I emailed the company but I havent gotten a reply yet.I checked on there support still nothing.If someone could tell me how to fix the wifi I would be grateful.It has no custom recovery;only stock recovery.
However I am able to flash firmware on the device itself from recovery.Is there a way to modify a file or add a file to fix this?
It has a A33 Quad-core processer with two cameras.I tried diffrent firmwares before like A33 firmwares but they didnt work.
What should I do?I dont have any service centers in my area and warreny wont fix it nor the company.
Please help me please.I posted many threads before with like 300 views but no replys.Please dont just view this thread and not reply.
I need all the support I can get.Please reply and dont just view.
Thank you!!!!!!!!!!!!!!!!!!!!
( ͡° ͜ʖ ͡°)
¡¡¡¡sʞɔoɹ ɐpx
boyam99 said:
Hello ,I have a Irulu eXpro X7 (16GB) 7" tablet with andriod 4.4.2 kitkat.It has a locked bootloader with no root acess,and firmware v2.
Recently it was bricked and I found the firmware on the companys website it was for my device.I used phoiexcard 3.09 to flash the firmware
on my 8GB sdhc memory card.I flashed the firmware and everything seems to be fine:eg touchscreen.
But I found out that the Wi-Fi isnt working.It says to see avaible networks please turn on wifi.So I pressed turn on.But the problem is that
it keeps turning off.I searched google for answers but there was no help at all.I emailed the company but I havent gotten a reply yet.I checked on there support still nothing.If someone could tell me how to fix the wifi I would be grateful.It has no custom recovery;only stock recovery.
However I am able to flash firmware on the device itself from recovery.Is there a way to modify a file or add a file to fix this?
It has a A33 Quad-core processer with two cameras.I tried diffrent firmwares before like A33 firmwares but they didnt work.
What should I do?I dont have any service centers in my area and warreny wont fix it nor the company.
Please help me please.I posted many threads before with like 300 views but no replys.Please dont just view this thread and not reply.
I need all the support I can get.Please reply and dont just view.
Thank you!!!!!!!!!!!!!!!!!!!!
( ͡° ͜ʖ ͡°)
¡¡¡¡sʞɔoɹ ɐpx
Click to expand...
Click to collapse
http://androidmtk.com/download-phoenixsuit
https://cloud.mail.ru/public/e4a01c0091ae/Allwinner A33/
Chiseled brail into stone translated via N5
---------- Post added at 05:07 AM ---------- Previous post was at 05:07 AM ----------
Please re-post to everyone
http://androidmtk.com/download-phoenixsuit
https://cloud.mail.ru/public/e4a01c0091ae/Allwinner A33/
Chiseled brail into stone translated via N5
---------- Post added at 05:27 AM ---------- Previous post was at 05:07 AM ----------
The link below is a quick guide anyone with an iRulu tablet that is stuck. Please pay it toward. It took me a month to figure out this shizzel.
https://drive.google.com/folderview?id=0B4fv54ZqdbASRWpYR21pRG9CUFE&usp=sharing
Chiseled brail into stone translated via N5
Hello guys i have lg v10 model h960a i flash it with wrong firmware using octo box now not work dead
any help please:crying:
regards
I had same problem with my old lg g4
I had to replace motherboard
Didn't find any other solution
---------- Post added at 08:17 PM ---------- Previous post was at 08:17 PM ----------
It won't boot at all
NO, There is still a shred of hope. Type in, Snapdragon Qualcomm hard brick solution into Google. Try, EVERYTHING.
And just in the rare case that you havn't tried everything, try doing this
1.) Remove battery
2.) Wait 5 seconds
3.) Reinsert battery
4.) Hold the volume up button
5.) Plug in your usb cable, while STILL holding the volume up button. If nothing happens, well **** this is out of my expertise.
Check out rootjunky
nokia alkng said:
Hello guys i have lg v10 model h960a i flash it with wrong firmware using octo box now not work dead
any help please:crying:
regards
Click to expand...
Click to collapse
Check out: Rootjunky.com or look it up on youtube. It really helped. But a lot of work, if you new. ( i think)
It says g4, but one of the video says v10 and g4. for unbricking.
I think its just bricked.
Had the same problem for another phone.
Or it might be hardware problem. Cuz there was complaints about that.
same problem . looking for a solution