hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
funloft said:
hi friends, i tried installing CWR on my huawei ascend g610-u20 but unfortunately the phone went into bootloop . pls help out
Click to expand...
Click to collapse
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
sp flash tool error
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
funloft said:
i even tried to flash a firmware using sp flash tool but i keep getting error " TO FORMAT CODE AREA IS FORBIDDEN ON THIS PHONE"
Pls help me out......
Click to expand...
Click to collapse
can you access write memory section in your sp flash tool program?
huawei g610-u20 bootloop
George Jetson said:
if you get full backup before install cwm, you should flash boot.img and recovery.img with sp flash tool (write memory way).
If you dont have any backup than you can download any u20 rom from huawei web site and extract boot.img and recovery.img with huawei extract tool(google this "huawei extract xda") than flash it sp flash tool in write memory section.
Click to expand...
Click to collapse
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
sp flash tool error
George Jetson said:
can you access write memory section in your sp flash tool program?
Click to expand...
Click to collapse
yes, but it is asking me for raw data file....
funloft said:
i dont have a full backup but a firmware from the internet which is giving me error using sp flash tool, i'll like if you can help me with the link to download the firmware from huawei website. thanks
Click to expand...
Click to collapse
Here is the link for stok rom u20
http://www.needrom.com/mobile/huawei-g610-u20/
huawei g610-u20 bootloop
the rom there is u20 with build B116, but the build for my phone is B121.... hope it will not affect?
huawei g610-u20 bootloop
please guys, help me out
FIXED
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
invalid IMEI
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Hello Friend
I was in error
nand flash not found
hellllllllllllllp me plzzz gays
need g610-u20 frimwaer for sp tool
bro plz give me a link for g610-u20 frimwaer for sp tool
lifegood8 said:
bro plz give me a link for g610-u20 frimwaer for sp tool
Click to expand...
Click to collapse
I can't post links yet, but you can Google it. Try typing "Huawei G610 U20 Needrom". You'll get links from Needrom.com, try look. Imgg for those. Once you're in the website, you'll most probably end up under G610's category. Try looking for the ones that say "official".
For you to extract the update.app file, try googling "Huawei Update.app extractor". The link you should look for should be from XDA Developers. You can then use it to extract the update.app file so that you can flash the .img files using SP Flashtool.
---------- Post added at 05:56 AM ---------- Previous post was at 05:50 AM ----------
funloft said:
now i have issues with INVALID IMEI after flashing the STOCK ROM and i don't have the backup of my IMEI....
i"ve tried the MAUI 3G software but it didn't work oooo
likewise SN writer...
any help please............
Click to expand...
Click to collapse
You can try using the Engineer Mode. Dial *#*#3646633#*#*, then swipe to the right until you're under "Connectivity" tab. Once you're there, go to "CDS Information".
funloft said:
finally!! i fixed my phone..................
thanks to george jetson and XDA as a whole
i downloaded this firmware
G610-U20_V100R001C00B121_Firmware_Egypt
i flashed all files in it EXCEPT the preloader file using SP FLASH TOOL
And now my phone is back and running............
i don't think i will try custom roms/ recovery again..:laugh:
LOL
Click to expand...
Click to collapse
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
ouro898 said:
You did a great job fixing your device. I would just like to ask, how were you able to flash using SP Flash Tool? I'm trying to fix my phone's IMEI because I think its NVRAM is corrupted. I'm trying to flash a decompiled boot.img to my phone but it keeps giving me an error. Can you help me with this?
Click to expand...
Click to collapse
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problemwhich i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
ouro898 said:
Oh. I think my only option now is flashing the partition where the NVRAM is located to fix it because, so far, none of the available methods of restoring it works. I'll have to re-root my phone, I guess.
Click to expand...
Click to collapse
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
funloft said:
Ok then! Goodluck.... please let me know in case u finally get a solution to the problem INVALID IMEI
Click to expand...
Click to collapse
I was actually having problems making the sp flash tool work. It won't download after I plug the device to the computer. I'm doing the whole process correctly but I'm always getting an error. Then I found out that the mt65xx driver appears very briefly in Device Manager, then disappears. This all happens after about a second. Do you happen to know how to solve this?
Use mtk droid tools !!
funloft said:
i downloaded that egypt firmware and everything needed is found inside............
but i'm still stuck with the invalid imei problem which i will like to beg some gurus here to help us with.............
Click to expand...
Click to collapse
RESTORE IMEI # USING THE NVRAM BACKUP !!! , in the MTK DROID TOOLS , COME OVER TO OUR THREAD FOR HUAWEI HONOR 3C
for more idea on restoring the nvram and IMEI which i accomplised
http://forum.xda-developers.com/newreply.php?do=postreply&t=2773098
Press Thanks !
Related
Hi.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
Please Help Me.
rstalker said:
Hi.
My 9300+ (chinese mtk6577) is dead... I have to updated wrong firmware and my phone will don't turn ON again, when I use the SP Flash Tool appears the message: "Firmware Upgrade could not be executed without PMT. Please "Download" ONLY first to create PMT on the target!
My internal partition is corrupted and i can't create PMT because my phone don't Turn On, but my USB is recognized by windows.
Please Help Me.
Click to expand...
Click to collapse
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
syserr said:
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Click to expand...
Click to collapse
THANK YOU! :highfive::highfive::highfive::highfive::highfive::highfive:
LOVE YOU MAN
PMT Corrupted & Format-all done
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
spandrd said:
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
Click to expand...
Click to collapse
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
spandrd said:
I faced the same error.......my PMT got corrupted (possibly due to an earlier attempt to re-size (system / data) partition using Swiftbootloader)...... & un-fortunately, I clicked on Format in SP Flash Tool as well.
Now all is gone.... phone doesn't switch on.........
Please guide...... to bring the bricked handset (Spice Mi-350n) to life again. I have backups..... but that relate to different scatter file (PMT) perhaps........ do I need to search & learn webos & acmeinstaller kind of things now?
Click to expand...
Click to collapse
HNaseer said:
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
Click to expand...
Click to collapse
The best way to restore your phone was already answered in the previous post, that is to FORMAT your device and subsequently flash the official firmware.
syserr said:
I know this is an old post, but this may help someone. (would have me a month ago)
Hopefully if your USB is seen in Windows you can convince SP Flash Tool to spew/download/write data to your phone while it's in Meta Mode.
I believe the PMT block is created by SP Flash Tool dynamically from scatter file. It's comparing the scatter file with what is sitting at the PMT address on the flash. If these two mismatch, you get the error you mentioned. If you want to force a new PMT that matches your scatter file's layout, you have to do a "Format" in SP Flash Tool. This will get you back to a PMT on flash that matches your scatter file, then SP Flash Tool will be happy and allow you to use Download (write to flash).
What is a PMT? A partition table that holds the addresses to all the other partitions.
Click to expand...
Click to collapse
iZLeeP said:
The best way to restore your phone was already answered in the previous post, that is to FORMAT your device and subsequently flash the official firmware.
Click to expand...
Click to collapse
Hi iZLeeP
Thanks for the quick reply. I dont have any official rom. The only backup i have is using the CWM backup of the official rom before applying a custom LG rom. If it is possible, how can i utilize the CWM backup of the official rom to revert back please ? I can see boot.img and recovery.img files in cwm backup; can i utilize them somehow to revert back ? Please help. Thanks.
HNaseer said:
Hi iZLeeP
Thanks for the quick reply. I dont have any official rom. The only backup i have is using the CWM backup of the official rom before applying a custom LG rom. If it is possible, how can i utilize the CWM backup of the official rom to revert back please ? I can see boot.img and recovery.img files in cwm backup; can i utilize them somehow to revert back ? Please help. Thanks.
Click to expand...
Click to collapse
Let me remind people, the first order of business must be to have a full firmware backup from the phone manufacturer or thru MTK Droid Root & Tools. Reading that you tried to resize your system & data partition, your cwm backup should not be affected by it. Try restoring to default the partition sizes using the app/script you used to resize. It should have that function. Then flash custom recovery and root and see if it works.
phone booting to main-screen or not?
hi HNaseer....
As replied by @syserr & @iZLeeP .............you can try to "Format-All / Format-All except bootloader" type of thing PROVIDED THAT YOU HAVE COMPLETE BACKUP OF RELEVANT PARTITIONS (till Cache and / or till FAT partition length) using SP Flash Tool........ & MTK Droid Tool......... PLUS, YOU WILL NEED IMEI BACKUP (IMEI No.) in such case if you want to restore.
SP Flash Tool needs Scatter File......... (obtainable thru MTK Droid Tool) & can help in backup of various partitions even if phone not turning on. BUT IMEI backup would be good........ IF YOU ARE ABLE TO BOOT / reach main screen after boot animation.
Rest of the details can be first read / understood from my MT6589 chipset type handset link from @Atrvscet : http://forum.xda-developers.com/showthread.php?t=2514419
Or, better search exact thread on xda / elsewhere to get stock / custom rom & flashing etc.
Lastly, if you are able to boot in recovery, best thing should be to flash / force flash original cwm backup from recovery.
HNaseer said:
Hi spandrd,
did u manage to resolve this problem. I am also facing this problem after attempting to re-size the partition using meteos mtk6589 rom edit apk .... Although my phone is still working properly without any issue, i am unable to root or install CWM by any means (tried mtk mobileuncle tools, tried spflash tool) but not working. Can you guide me how to root and install cwm as i am unable to revert to my old backup w/o cwm.
Click to expand...
Click to collapse
spandrd said:
hi HNaseer....
As replied by @syserr & @iZLeeP .............you can try to "Format-All / Format-All except bootloader" type of thing PROVIDED THAT YOU HAVE COMPLETE BACKUP OF RELEVANT PARTITIONS (till Cache and / or till FAT partition length) using SP Flash Tool........ & MTK Droid Tool......... PLUS, YOU WILL NEED IMEI BACKUP (IMEI No.) in such case if you want to restore.
SP Flash Tool needs Scatter File......... (obtainable thru MTK Droid Tool) & can help in backup of various partitions even if phone not turning on. BUT IMEI backup would be good........ IF YOU ARE ABLE TO BOOT / reach main screen after boot animation.
Rest of the details can be first read / understood from my MT6589 chipset type handset link from @Atrvscet : http://forum.xda-developers.com/showthread.php?t=2514419
Or, better search exact thread on xda / elsewhere to get stock / custom rom & flashing etc.
Lastly, if you are able to boot in recovery, best thing should be to flash / force flash original cwm backup from recovery.
Click to expand...
Click to collapse
HNaseer.... I agree with everything spandrd just said. I'd like to stress though, getting a backup of your NVRAM partition is much better than having MTKDT copy your /data/nvram. So if you have a choice, backup the NVRAM partition with SPFT or if MTKDT has that option use it. (I've rarely used MTKDT as I found aspects confusing)
Incredible.
Thank you so much. HAd almost given up hope...
How to connect mtk6582device (spice dream uno) in meta mode
Plz help me out guys ??????
I have a similar issue with my Unite 2 phone. I tried the format option too but I am getting STORAGE_ERROR
[Storage Error] The load and the target are inconsistent!
A Hint message is also there :
The load to be downloaded is for EMMC.
The Target storage is .
Please select a correct load according to the storage.
Please help me in resolving this issue. My phone model is Micromac unite 2 A106 8GB model.
syserr said:
HNaseer.... I agree with everything spandrd just said. I'd like to stress though, getting a backup of your NVRAM partition is much better than having MTKDT copy your /data/nvram. So if you have a choice, backup the NVRAM partition with SPFT or if MTKDT has that option use it. (I've rarely used MTKDT as I found aspects confusing)
Click to expand...
Click to collapse
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
---------- Post added at 01:24 AM ---------- Previous post was at 12:26 AM ----------
hello guys
how can i format my device Blu studio energy 2 with sp flash tool my phone is dead after i do the format and i dont have firmware back up
thank you
Omarod said:
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
Not sure what you are expecting to do with a FORMAT. If you had a good backup of your NVRAM partition, then what you would need is a SCATTER file and ROM files, you could FORMAT then DOWNLOAD the ROM files and your NVRAM file to your device with SPFT. But since you don't have your NVRAM partition, you don't have an easy path. FYI, I don't know new devices... there could be more complication than MT6577/75.
Click to expand...
Click to collapse
syserr said:
Omarod said:
hello guys
how can i format my device Blu studio energy 2 with sp flash toolmy phone is dead after i do the format and i dont have firmware back up
thank you
Not sure what you are expecting to do with a FORMAT. If you had a good backup of your NVRAM partition, then what you would need is a SCATTER file and ROM files, you could FORMAT then DOWNLOAD the ROM files and your NVRAM file to your device with SPFT. But since you don't have your NVRAM partition, you don't have an easy path. FYI, I don't know new devices... there could be more complication than MT6577/75.
Click to expand...
Click to collapse
Thank you for reply
Where do i find the scatter file and the ROM for my blu studio energy 2 MT6735 chepset please
Thank you again
Click to expand...
Click to collapse
Omarod said:
syserr said:
Thank you for reply
Where do i find the scatter file and the ROM for my blu studio energy 2 MT6735 chepset please
Thank you again
Click to expand...
Click to collapse
Try google, or search xda, or needrom.com...
This may or may not help you. If I were you I would use SPFT right now to try to backup your NVRAM partition if it's not too late. Your FORMAT may have wiped the NVRAM partition already. If it has wiped it, your only good path is to find someone willing to give you their NVRAM partition. Then somehow insert your own IMEI and WIFI MAC in and pray.
Click to expand...
Click to collapse
Could you tell me step by step what can I do coz I'm new in sp flash tool and. Mtk droid root and flash tool
Thank you so much
First find proper ROM on www.needrom.com
Hello Guys
still waiting for help please
Blu Studio Energy 2 -Backup file- firmware Please
So, I was trying to install CWM recovery in ma Huawei G610-U20 with the help of Mobileuncle app but i accidentally flashed one that was for G610-U00 and after that ma phone was bricked So then i flashed the Firmware of G610-U00 with the Sp Flash tool and now i'm having the Invalid IMEI >.<
So now i need to fix that so that i can use ma SIM card!
Any Solutions??
Official Update
usamaash said:
So, I was trying to install CWM recovery in ma Huawei G610-U20 with the help of Mobileuncle app but i accidentally flashed one that was for G610-U00 and after that ma phone was bricked So then i flashed the Firmware of G610-U00 with the Sp Flash tool and now i'm having the Invalid IMEI >.<
So now i need to fix that so that i can use ma SIM card!
Any Solutions??
Click to expand...
Click to collapse
Here is the first update for our Huawei g610-U20 address: http://www.needrom.com/mobile/huawei-g610-u20/ If this helped you hit thanks please.
Merry Christmas to all.
usamaash said:
So, I was trying to install CWM recovery in ma Huawei G610-U20 with the help of Mobileuncle app but i accidentally flashed one that was for G610-U00 and after that ma phone was bricked So then i flashed the Firmware of G610-U00 with the Sp Flash tool and now i'm having the Invalid IMEI >.<
So now i need to fix that so that i can use ma SIM card!
Any Solutions??
Click to expand...
Click to collapse
Use root explorer..goto data look nvram folder and delete nvram folder and reatart
Found a way FInally
http://forum.xda-developers.com/showthread.php?p=52534388#post52534388
Check this threat out
Huawei g 610 u20... flashed recovery and phone is not switching on
kenlir15 said:
Use root explorer..goto data look nvram folder and delete nvram folder and reatart
Click to expand...
Click to collapse
i flashed the update.app specified in the //forum.xda-developers.com/show...8#post52534388 and flashed the recovery using mobile uncle. when the phone restarted... it is restarting regularly after the Huawei logo loads. i am not able to enter the recovery mode. can some one help in fixing this issue.
Benav you posted this in the wrong thread post it in the correct thread
benav said:
i flashed the update.app specified in the //forum.xt-developers.com/show...8#post52534388 and flashed the recovery using mobile uncle. when the phone restarted... it is restarting regularly after the Huawei logo loads. i am not able to enter the recovery mode. can some one help in fixing this issue.
Click to expand...
Click to collapse
Try flashing stock firmware with sp flash tool
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Deadman jo said:
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Click to expand...
Click to collapse
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
i need HCL me connect 3G 2.0tabs Stock recovery
Deadman jo said:
i need HCL me connect 3G 2.0tabs Stock recovery
Click to expand...
Click to collapse
Stock recovery should be included in the stock rom package unless you mean custom recovery.
MigoMujahid said:
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
Click to expand...
Click to collapse
Bro i cant flash this rom on sp flash tool
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
As far as i know, you use mp tool not sp flash tool.
http://hulkload.com/pjj60j5hx6mt
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
this rom only flash with stock recovery im lost my stock recovery..
Flash with Digma iDND7 firmware.
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
I have one but the file is locked ... since a year now
Also I tried flashing the stock rom gives this error :
Error: Invalid partition setting
17: fat 979e8000:84de8000
installation aborted
Please help or suggest
++++++++++++++++++++++++++++++++++++
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
So there is an update I was able to successfully Flash a firmware from same board which was used by HCL me connect 3G 2.0.
I searched this for 3 days and found that Digma idnd 7 tab used the same board , so I hunted for Digma firmware and luckily got them, the file link contains both ota and Flash file via MP tool.
I tried ota update but I got the same error.
So I used MP flash tool v5.1352.01
Download adb drivers of HCL me tablet.
Extract the zip, then edit the scatter file name to "MT6577_Android_scatter_emmc".
Now open SP flash tool and choose the scatter.
Click on download and then plug the tab in using the USB.
Then I got some PMT file needs to be updated error which was fixed by the next step.
Stop the download, pull the device out, then click Format options in the 2nd tab and then "Format except Bootloader".
Plug the device in.
once the format is done, plug out again, click download(make sure scatter is selected).
Plug in the device.
It will start flashing.
File links :
HCL USB drivers : androidmtkDOTcom/download-hcl-usb-driver
SP flash links : androidmtkDOTcom/smart-phone-flash-tool
Digma original firmware : Unable to post link so : use google and search supportdotdigma
ps: may be this helps digmaDOTru/catalog/item/1344
Also you will need to change the language to English after Booting up.
Click on the equalizer>> click on icon marked A[use some common sense that's what I did xD] then inside that tap on the very , top of the submenu, you will get the option to change to English.
Please let me know if if works for you. Or you need any thing.
Please need help to unbrick my phone model dub-lx2 . i tried to flash system, ramdisk, ramdisk recovery, kernel via fastboot. no errors but system don't boot. i tried to update by dload but every time uodate fail. i don't konw how or Wich uppdate.app to restore the stock system.
Phone no not booting only fastboot command works
Delhamito said:
Please need help to unbrick my phone model dub-lx2 . i tried to flash system, ramdisk, ramdisk recovery, kernel via fastboot. no errors but system don't boot. i tried to update by dload but every time uodate fail. i don't konw how or Wich uppdate.app to restore the stock system.
Phone no not booting only fastboot command works
Click to expand...
Click to collapse
How did you unlock the bootloader?
Sent from my HUAWEI DUB-LX1 using XDA Labs
Paid service 4$ : ministryofsolutions.com/huawei-bootloader
Please if u have sotck rom or system backup please share it could not find firmware for this model only online update
Did you fix it??
Delhamito said:
Paid service 4$ : ministryofsolutions.com/huawei-bootloader
Please if u have sotck rom or system backup please share it could not find firmware for this model only online update
Click to expand...
Click to collapse
Delhamito said:
Please need help to unbrick my phone model dub-lx2 . i tried to flash system, ramdisk, ramdisk recovery, kernel via fastboot. no errors but system don't boot. i tried to update by dload but every time uodate fail. i don't konw how or Wich uppdate.app to restore the stock system.
Phone no not booting only fastboot command works
Click to expand...
Click to collapse
If you need help you should post here your mobile build number .you have to convert Update.app file to raw-xml file and correct loader for flash.if you have umt qfire tool then you can unbrick your phone .:good:
i can easy unbrick dub-lx,
Huawei y7 pro สามารถใช้แอป King Root ใด้ใหมครับ
As the title says ,
My IMEI is Null and Baseband is Unknown after flashing and the boot and recovery going corrupt
tried flashing the GSI , tried flashing stock rom using MTK client but its still the same ,
anyone has the right mtk AP DB file database for our mtk 6893 to flash the imei ?
the last AP DB file databse is only updated till march of 2022 and there is no
AP DB database file for mt 6893.
Any idea how i can flash imei on our device ?
Also Everything works except imei and fingerprint .
You have overwritten persist.img which is partition responsible for fingerprint. You cannot flash any other devices persist partition to fix it as it is unique for every device. Give your phone to OnePlus service center.
PattasuBalu said:
You have overwritten persist.img which is partition responsible for fingerprint. You cannot flash any other devices persist partition to fix it as it is unique for every device. Give your phone to OnePlus service center.
Click to expand...
Click to collapse
Well the thing here is the service center wants to shell out money from me by claiming the motherboard is damaged due to water which is false . Water did go in my cellphone 4 to 5 months back and the problem right now is because of my boot.img and recovery going corrupt due to wrong firmware flashing . Now for fingerprint i believe you its the persist image , regarding the imei its the nvram i dont know exactly which one . Service center did flash my mobile as per their claims but still the cellphones imei and fingerprint is not working and i think thats because they might have flashed the wrong files or they just wanted to shell out money thats all i can say .
Apart from the service center advice , if anyone has the twrp backup of their partions please give me a link or let me know or some other way to flash the imei of our device by flashing the mediateks 6893 imei , i can see how other people are flashing their imei devices using the mediateks tool SP write one , but there are no base band files for our 6893 / 1200 dimensity to flash the imei .
rohit4989 said:
Well the thing here is the service center wants to shell out money from me by claiming the motherboard is damaged due to water which is false . Water did go in my cellphone 4 to 5 months back and the problem right now is because of my boot.img and recovery going corrupt due to wrong firmware flashing . Now for fingerprint i believe you its the persist image , regarding the imei its the nvram i dont know exactly which one . Service center did flash my mobile as per their claims but still the cellphones imei and fingerprint is not working and i think thats because they might have flashed the wrong files or they just wanted to shell out money thats all i can say .
Apart from the service center advice , if anyone has the twrp backup of their partions please give me a link or let me know or some other way to flash the imei of our device by flashing the mediateks 6893 imei , i can see how other people are flashing their imei devices using the mediateks tool SP write one , but there are no base band files for our 6893 / 1200 dimensity to flash the imei .
Click to expand...
Click to collapse
Try this https://miaccountguide.com/mtk-imei-repair-tool-download/
Chaitanya Dixit said:
Try this https://miaccountguide.com/mtk-imei-repair-tool-download/
Click to expand...
Click to collapse
tried that already , doesnt work for nord 2 .
rohit4989 said:
tried that already , doesnt work for nord 2 .
Click to expand...
Click to collapse
You dont have your mtkclient partition backup?
Chaitanya Dixit said:
You dont have your mtkclient partition backup?
Click to expand...
Click to collapse
Nope , can you send me your mtk client backup ? if its working ?
rohit4989 said:
Nope , can you send me your mtk client backup ? if its working ?
Click to expand...
Click to collapse
PattasuBalu said:
You have overwritten persist.img which is partition responsible for fingerprint. You cannot flash any other devices persist partition to fix it as it is unique for every device. Give your phone to OnePlus service center.
Click to expand...
Click to collapse
Bro I don't think there would be any such thing as unique partition or something , that would be just an overkill for a phone that costs 30k . See this link how the calibration of fingerprint is done through engineer mode I guess and also I think oneplus just doesn't want to give the appropriate files for flashing. The phone is not listed on the main site , there are no official files to flash the device . Like you make a mid range flagship and delist it within 1 year of production from your main website ? Sorry for the rant but see this fingerprint calibration video and also I think the information regarding the fingerprint would be wrong regarding the persist image file , that's just overkill hardware spec on a phone that costs 30000
rohit4989 said:
Nope , can you send me your mtk client backup ? if its working ?
Click to expand...
Click to collapse
https://files.giovix92.workers.dev/0:/OnePlus Nord 2/Stock ROMs/ Download appropriate firmware and try to restore via mtkclient.
Chaitanya Dixit said:
https://files.giovix92.workers.dev/0:/OnePlus Nord 2/Stock ROMs/ Download appropriate firmware and try to restore via mtkclient.
Click to expand...
Click to collapse
Did that already, it still won't fix the imei , can you give me the link of vcom drivers please ? I uninstalled my vcom drivers and now I can't find it
rohit4989 said:
Did that already, it still won't boot up , can you give me the link of vcom drivers ? I uninstalled my vcom drivers and now I can't find it
Click to expand...
Click to collapse
What is the issue? Can you clarify?
Here is the vcom drivers link https://forum.xda-developers.com/t/...32-64-bit-driver-install-tutorial-m2.3267033/
Chaitanya Dixit said:
What is the issue? Can you clarify?
Here is the vcom drivers link https://forum.xda-developers.com/t/...32-64-bit-driver-install-tutorial-m2.3267033/
Click to expand...
Click to collapse
If you want scatter file for DN2101
Chaitanya Dixit said:
If you want scatter file for DN2101 then contact me.
Click to expand...
Click to collapse
Can you make a thread and post it ? It would be helpful for all of us xdians
rohit4989 said:
Can you make a thread and post it ? It would be helpful for all of us xdians
Click to expand...
Click to collapse
No brother because it is not signed firmware, for that you need to unlock BL
Chaitanya Dixit said:
No brother because it is not signed firmware, for that you need to unlock BL
Click to expand...
Click to collapse
Bro , when we are flashing a full file from BROM mode it doesnt matter if we have a unlocked BL or Locked BL , i repeat it wont
matter when we are flashing a full firmware through BROM mode if we have a locked BL or unlocked BL
rohit4989 said:
Bro , when we are flashing a full file from BROM mode it doesnt matter if we have a unlocked BL or Locked BL , i repeat it wont
matter when we are flashing a full firmware through BROM mode if we have a locked BL or unlocked BL
Click to expand...
Click to collapse
I tested it already using sp flash tool. Because of verified boot you cant flash scatter file with locked BL.
Chaitanya Dixit said:
I tested it already using sp flash tool. Because of verified boot you cant flash scatter file with locked BL.
Click to expand...
Click to collapse
the whole purpose of sp flash tool is to install a whole new firmware , you can definitely install it with a locked bl or unlocked bl , make sure you are in BROM mode and you have enabled the mtk bypass
Chaitanya Dixit said:
I tested it already using sp flash tool. Because of verified boot you cant flash scatter file with locked BL.
Click to expand...
Click to collapse
can you link me the firmware file where you got the scatter ?
rohit4989 said:
can you link me the firmware file where you got the scatter ?
Click to expand...
Click to collapse
Here is the link https://www.mediafire.com/file/gjnje80ou9vevl1/ONE_PLUS_NORD_2_SCATER_FILE_GsmMafia.Com.rar/file