Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Deadman jo said:
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Click to expand...
Click to collapse
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
i need HCL me connect 3G 2.0tabs Stock recovery
Deadman jo said:
i need HCL me connect 3G 2.0tabs Stock recovery
Click to expand...
Click to collapse
Stock recovery should be included in the stock rom package unless you mean custom recovery.
MigoMujahid said:
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
Click to expand...
Click to collapse
Bro i cant flash this rom on sp flash tool
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
As far as i know, you use mp tool not sp flash tool.
http://hulkload.com/pjj60j5hx6mt
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
this rom only flash with stock recovery im lost my stock recovery..
Flash with Digma iDND7 firmware.
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
I have one but the file is locked ... since a year now
Also I tried flashing the stock rom gives this error :
Error: Invalid partition setting
17: fat 979e8000:84de8000
installation aborted
Please help or suggest
++++++++++++++++++++++++++++++++++++
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
So there is an update I was able to successfully Flash a firmware from same board which was used by HCL me connect 3G 2.0.
I searched this for 3 days and found that Digma idnd 7 tab used the same board , so I hunted for Digma firmware and luckily got them, the file link contains both ota and Flash file via MP tool.
I tried ota update but I got the same error.
So I used MP flash tool v5.1352.01
Download adb drivers of HCL me tablet.
Extract the zip, then edit the scatter file name to "MT6577_Android_scatter_emmc".
Now open SP flash tool and choose the scatter.
Click on download and then plug the tab in using the USB.
Then I got some PMT file needs to be updated error which was fixed by the next step.
Stop the download, pull the device out, then click Format options in the 2nd tab and then "Format except Bootloader".
Plug the device in.
once the format is done, plug out again, click download(make sure scatter is selected).
Plug in the device.
It will start flashing.
File links :
HCL USB drivers : androidmtkDOTcom/download-hcl-usb-driver
SP flash links : androidmtkDOTcom/smart-phone-flash-tool
Digma original firmware : Unable to post link so : use google and search supportdotdigma
ps: may be this helps digmaDOTru/catalog/item/1344
Also you will need to change the language to English after Booting up.
Click on the equalizer>> click on icon marked A[use some common sense that's what I did xD] then inside that tap on the very , top of the submenu, you will get the option to change to English.
Please let me know if if works for you. Or you need any thing.
Related
Hi there...
Need root Alactel pixi 7 (i213)
Android is 4.2.2 with stock rom
chip mt8127
I tried every root-ing software i found ..and no luck..
cant save scatter file by mtkdroidtools
there is no much information in net..so i dont know what to do...
there is way to flash cwm-recovery from fastboot..but im scared so i want first to backup stock recovery
sry for bad english
HELP:crying::crying:
I213
I am in same situation, cant find root solution for pixi 7.
Model:I213
Android version: 4.4.2
Kernel: 3.4.67
Build number: 01001
If anyone have some information please share..
Thank you
dunpeall said:
I am in same situation, cant find root solution for pixi 7.
Model:I213
Android version: 4.4.2
Kernel: 3.4.67
Build number: 01001
If anyone have some information please share..
Thank you
Click to expand...
Click to collapse
I just found some method to dump stock recovery by sp flashtool
and then flash cwm.so we can install root...
I will post later
Xcore_Rj said:
I just found some method to dump stock recovery by sp flashtool
and then flash cwm.so we can install root...
I will post later
Click to expand...
Click to collapse
Still waiting
dunpeall said:
Still waiting
Click to expand...
Click to collapse
I DID IT .... HAHAHAHAH
man have you ever flashed something with sp flashtool ??
you just need to flash one image..i made it by myself and guess? ITS WORKED
great
Xcore_Rj said:
I DID IT .... HAHAHAHAH
man have you ever flashed something with sp flashtool ??
you just need to flash one image..i made it by myself and guess? ITS WORKED
Click to expand...
Click to collapse
Not with sp flashtool, only with Odin.
So what's the magic trick ? Can u provide me more details.
Thank you
detail
dunpeall said:
Not with sp flashtool, only with Odin.
So what's the magic trick ? Can u provide me more details.
Thank you
Click to expand...
Click to collapse
Yep :good:
Its just too long story
The Main trick is that we are dumping system partition
Then opening it in linux ..installing su manualy..and reflashing
i can make detailed guide if you want
Now im trying to find custom recovery..and again problems
Xcore_Rj said:
Yep :good:
Its just too long story
The Main trick is that we are dumping system partition
Then opening it in linux ..installing su manualy..and reflashing
i can make detailed guide if you want
Now im trying to find custom recovery..and again problems
Click to expand...
Click to collapse
If u can that would be awesome
thanks again
dunpeall said:
If u can that would be awesome
thanks again
Click to expand...
Click to collapse
can u get 2 files from your tab?
/proc/dumchar_info
and
/proc/emmc
if we have same partition table then i will send you system.img for flashing it will much easy
Xcore_Rj said:
can u get 2 files from your tab?
/proc/dumchar_info
and
/proc/emmc
if we have same partition table then i will send you system.img for flashing it will much easy
Click to expand...
Click to collapse
Okm sorry for dalay. here's the files.
http://www.mediafire.com/download/3p6xq1lnvb8x85b/proc.rar
dunpeall said:
Okm sorry for dalay. here's the files.
http://www.mediafire.com/download/3p6xq1lnvb8x85b/proc.rar
Click to expand...
Click to collapse
:good:
so first off all create backup of your system partition.
sp flash : https://mega.co.nz/#!HxcBST4A!TjjbUVq_cZjMMcgIsxtm7rrlKCKgdXujx62ShlnoDyY
1. open flash tool
2. go to download
3. scatter-loading select 8127_blabalbalba.txt , (scatter is in flash tool folder)
4. go to readback
5. select Add
6. double click on added line
7. save as system.img
8. Type : hex , Region EMMC_USER , start : 0x32180000 , lenght 0x22600000 , ok
9. selcet Read Back
10. turn off tab and connect to Pc - it will start download
11. wait for end and disconnect from pc
Then emmmm
download system.img : https://mega.co.nz/#!i9FnGBqY!glbZXPA_me6wmrTowZZEa3-37bO2mAeuzHQuzXov3Wg
again open flash tool , load scatter
1. in download tab uncheck all fields .. ALL fields
2. select only Android
3. click on loclation and select downloaded system.img
4. select download , turn off tab and connect to pc
5. i think thats all
i will wait for reply : D
Xcore_Rj said:
:good:
so first off all create backup of your system partition.
sp flash : https://mega.co.nz/#!HxcBST4A!TjjbUVq_cZjMMcgIsxtm7rrlKCKgdXujx62ShlnoDyY
1. open flash tool
2. go to download
3. scatter-loading select 8127_blabalbalba.txt , (scatter is in flash tool folder)
4. go to readback
5. select Add
6. double click on added line
7. save as system.img
8. Type : hex , Region EMMC_USER , start : 0x32180000 , lenght 0x22600000 , ok
9. selcet Read Back
10. turn off tab and connect to Pc - it will start download
11. wait for end and disconnect from pc
Then emmmm
download system.img : https://mega.co.nz/#!i9FnGBqY!glbZXPA_me6wmrTowZZEa3-37bO2mAeuzHQuzXov3Wg
again open flash tool , load scatter
1. in download tab uncheck all fields .. ALL fields
2. select only Android
3. click on loclation and select downloaded system.img
4. select download , turn off tab and connect to pc
5. i think thats all
i will wait for reply : D
Click to expand...
Click to collapse
I backup created but for some reason i cant download system_rooted.img from mega.co.nz.
Do you have some other link?
dunpeall said:
I backup created but for some reason i cant download system_rooted.img from mega.co.nz.
Do you have some other link?
Click to expand...
Click to collapse
I will upload another one
Xcore_Rj said:
I will upload another one
Click to expand...
Click to collapse
Ok, thank you... I am waiting
dunpeall said:
Ok, thank you... I am waiting
Click to expand...
Click to collapse
sry for delay
here it goes : http://1drv.ms/1tIAD2y
Xcore_Rj said:
sry for delay
here it goes : http://1drv.ms/1tIAD2y
Click to expand...
Click to collapse
Stuck at alcatel onetouch pixi 7 logo :|
dunpeall said:
Stuck at alcatel onetouch pixi 7 logo :|
Click to expand...
Click to collapse
oops
i just saw that your Build number is 01001 mine 01002
i think thats the problem..
so i have 2 solutions
1st
try flash boot.img same way as system..uncheck all select only bootable and select boot.img
2nd
flash your backuped system and try OTA update to 01002 then try again...
boot.img : https://mega.co.nz/#!T80ihQAA!wiofxhYpc_5sfrKpUYIINSU-Vzb7vFqENI1EbaPyT-0
dunpeall said:
Stuck at alcatel onetouch pixi 7 logo :|
Click to expand...
Click to collapse
hey if you didnt started yet backup boot.img
start : 0x1d20000
lenght : 0x60000
Xcore_Rj said:
oops
i just saw that your Build number is 01001 mine 01002
i think thats the problem..
so i have 2 solutions
1st
try flash boot.img same way as system..uncheck all select only bootable and select boot.img
2nd
flash your backuped system and try OTA update to 01002 then try again...
boot.img : https://mega.co.nz/#!T80ihQAA!wiofxhYpc_5sfrKpUYIINSU-Vzb7vFqENI1EbaPyT-0
Click to expand...
Click to collapse
Flashed boot.img and system_rooted.img ... It's working and have root access cheers..
but in about tabler.. build number is still the same 01001.
thanks
dunpeall said:
Flashed boot.img and system_rooted.img ... It's working and have root access cheers..
but in about tabler.. build number is still the same 01001.
thanks
Click to expand...
Click to collapse
Well Enjoy
Hard bricked my canvas nitro.
I m dumb tried to flash a ROM at 2% battery..... everything's ded.
No recovery. No fastboot. Broken logo.bin.
Phone is detected in so flash tools... but when I flash the original firmware.. it gives me error brom_cmd_jump_da_fail... same with ygdp
.
Plx help
TSG756 said:
Hard bricked my canvas nitro.
I m dumb tried to flash....
..Plx help
Click to expand...
Click to collapse
Which ROM did you try?
Was it meant for your device?
And as far as I know if its really a hard brick you'll need JTAG for it to be recovered.
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Did your recovery mode working or not? If it is then download any custom rom, place it on your external sd card and flash it. If not get the stock and flash it through Sp flash tool
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
Me too having the same issue and no recovery, no factory mode and either fastboot bode also not working . What do i do now ?? Any solution.. I just wanna restore it as stock one..
U will try YGDP TOOL
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
reis1996 said:
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
Click to expand...
Click to collapse
Check this, may be it is helpful
https://forum.xda-developers.com/showpost.php?p=68672696&postcount=5
Bricked micromax canvas a 311
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Jithin James said:
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Click to expand...
Click to collapse
At most you can install a custom recovery using fastboot (google it) and then install a ROM through it
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!
Can anyone please help me to port a TWRP or similiar to my phone? I've tried all the threads and forums for porting to MTK devices and I coudn't port it seems it doesn't on MTK 67XX devices.
I'll be very gratefull.
Link for stock recovery https:// drive.google.com/open?id=0B0M07vEulBG8cUZtS192aUtKVGs
Device: Ulefone Gemini
Model: Gemini
Android: 6.0
MTK: MTK 6737T
Dersaun said:
Can anyone please help me to port a TWRP or similiar to my phone? I've tried all the threads and forums for porting to MTK devices and I coudn't port it seems it doesn't on MTK 67XX devices.
I'll be very gratefull.
Link for stock recovery https:// drive.google.com/open?id=0B0M07vEulBG8cUZtS192aUtKVGs
Device: Ulefone Gemini
Model: Gemini
Android: 6.0
MTK: MTK 6737T
Click to expand...
Click to collapse
Hello, you can try out the TWRP recovery I ported. Let me know how it goes. You can flash it via SP Flashtool with your scatter file.
https://
drive.google.com/open?id=0B7kR2R8eQnonemtaY056dWZxRXc
Christianihechi said:
Hello, you can try out the TWRP recovery I ported. Let me know how it goes. You can flash it via SP Flashtool with your scatter file.
https://
drive.google.com/open?id=0B7kR2R8eQnonemtaY056dWZxRXc
Click to expand...
Click to collapse
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Dersaun said:
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Click to expand...
Click to collapse
Thanks!!! It worked.
But the touch screen doesnt work there is a way too fix it?
Dersaun said:
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Click to expand...
Click to collapse
Really You can try re-flashing it and boot into recovery directly via button combos. In the meantime, I will try to port another and post link.
Dersaun said:
Thanks!!! It worked.
But the touch screen doesnt work there is a way too fix it?
Click to expand...
Click to collapse
Yeap. Stick around, I will get back to you.
Try this and let me know if touch works.
https
://drive.google.com/file/d/0B7kR2R8eQnonekFaUU1qUDI0dG8/view?usp=drivesdk
i been also trying to install twrp on my ulefone gemini... i tryed Christianihechi recovery files.. on both of the files the touch screen didnt work...
Christianihechi said:
Try this and let me know if touch works.
https
://drive.google.com/file/d/0B7kR2R8eQnonekFaUU1qUDI0dG8/view?usp=drivesdk
Click to expand...
Click to collapse
Hi, I tried this one too and also touch didn't work. One more thing I try to used with an OTG mouse to make a backup and after use it my phone got stuck in ulefone logo. I have to unbrick with sp flash tool.
i was able to root my gemini... using the last recovery that Christianihechi give us... i flashed the recovery, got into recovery "touch doesnt work so i connected a usb mouse" and i was able to swape to continue, install supersu zip file, exit from recovery reboot disconect the usb mouse and let the phone boot... and it works fine :laugh:
Wow. That sounds real good. Kudos.
---------- Post added at 04:35 PM ---------- Previous post was at 04:30 PM ----------
I got another one for you guys(thanks to @jemmini). Download from here
http://
www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. You can give it a shot.
cesarcpp1 said:
i was able to root my gemini... using the last recovery that Christianihechi give us... i flashed the recovery, got into recovery "touch doesnt work so i connected a usb mouse" and i was able to swape to continue, install supersu zip file, exit from recovery reboot disconect the usb mouse and let the phone boot... and it works fine :laugh:
Click to expand...
Click to collapse
Dersaun said:
Hi, I tried this one too and also touch didn't work. One more thing I try to used with an OTG mouse to make a backup and after use it my phone got stuck in ulefone logo. I have to unbrick with sp flash tool.
Click to expand...
Click to collapse
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Success Root twrp
Thank you ! It worked perfectly
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
Thank you it work perfct!
Hi,
Now that nougat update has just got out, do you think root will still work?
tryed with nougat update and rooted fine
Hello where can i find a nougat preview rom for the ulefone gemini thanks!
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
I've flashed this recovery via SP Flash Tool but when I try to turn on the smartphone in recovery mode the OS gets booted. If I try to use adb reboot recovery I only get a dead droid with the no command prompt. What am I doing wrong?
EDIT: nvm changing SP Flash Tool version did the trick
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
Hai Bro,i m using a china unbranded phone mtk 6737T android 6.01+ and can i use this recovery to sp flash to root my phone ? Thank.
Hello XDA community,
I Used To Flash My Phone vivo y15s and I did but after Flash it stuck on logo and then again I did Flashing but this time I choose Format All + Download in So Flash tool and then Set Completely dead. When I press Power button no response but pc still detects.
How Can I Boot My Set Again?
Thank You and Sorry For My English.
That's weird. With SP Flash Tool you should be able to re-flash phone's Stock ROM.
jwoegerbauer said:
That's weird. With SP Flash Tool you should be able to re-flash phone's Stock ROM.
Click to expand...
Click to collapse
Yes, I Did Again but Still nothing happen.
Take it to repair service.
It is because of the firmware and unavailability od userdata.
If want I can give a firmware zip
Suji2k said:
It is because of the firmware and unavailability od userdata.
If want I can give a firmware zip
Click to expand...
Click to collapse
i've exactly the same issue bro with vivo y1s can you advice or help? Would be highly appreciated!!