Hard bricked my canvas nitro.
I m dumb tried to flash a ROM at 2% battery..... everything's ded.
No recovery. No fastboot. Broken logo.bin.
Phone is detected in so flash tools... but when I flash the original firmware.. it gives me error brom_cmd_jump_da_fail... same with ygdp
.
Plx help
TSG756 said:
Hard bricked my canvas nitro.
I m dumb tried to flash....
..Plx help
Click to expand...
Click to collapse
Which ROM did you try?
Was it meant for your device?
And as far as I know if its really a hard brick you'll need JTAG for it to be recovered.
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Did your recovery mode working or not? If it is then download any custom rom, place it on your external sd card and flash it. If not get the stock and flash it through Sp flash tool
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
Me too having the same issue and no recovery, no factory mode and either fastboot bode also not working . What do i do now ?? Any solution.. I just wanna restore it as stock one..
U will try YGDP TOOL
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
reis1996 said:
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
Click to expand...
Click to collapse
Check this, may be it is helpful
https://forum.xda-developers.com/showpost.php?p=68672696&postcount=5
Bricked micromax canvas a 311
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Jithin James said:
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Click to expand...
Click to collapse
At most you can install a custom recovery using fastboot (google it) and then install a ROM through it
Related
As you can see the title of the thread , I just want to know if i could remove rom (SamHD) and i also want to unroot my canvas hd so is there anyway that i could do this....!!! , Then Please Tell Me ASAP
Thanks
zachlevi said:
As you can see the title of the thread , I just want to know if i could remove rom (SamHD) and i also want to unroot my canvas hd so is there anyway that i could do this....!!! , Then Please Tell Me ASAP
Thanks
Click to expand...
Click to collapse
Reflash Stock rom via sp tools.
hell1134 said:
Reflash Stock rom via sp tools.
Click to expand...
Click to collapse
Actually the problem i am facing is that i am using windows 8 X64 and whenever i switch off my phone and connect the usb to computer it doesn't connect my phone :/ and it won't let me flash the stock firmware...!!!
I have installed all the drivers there are for X64 windows...!!!
zachlevi said:
I have installed all the drivers there are for X64 windows...!!!
Click to expand...
Click to collapse
We all have issues with Drivers on 64 bit windows,
try below thread to install drivers properly.
forum.xda-developers.com/showthread.php?t=2206421
-- I am not responsible if some thing goes wrong with your device, use at your own risk
Please Someone Help Me...???
I want to flash stock firmware but i can't because i have windows 8 X64 Bits.
I have successfully installed the drivers, but when i click on Firmware> Upgrade it shows a red color..??? /:
In this process the Progress bar become RED 100%,Then it shows me a screen saying "Sp Flash Tools Error : (8200), What does this means and how am i suppose to have stock firmware....???
zachlevi said:
In this process the Progress bar become RED 100%,Then it shows me a screen saying "Sp Flash Tools Error : (8200), What does this means and how am i suppose to have stock firmware....???
Click to expand...
Click to collapse
Use the latest version of SP Flash tool. That must solve your problem.
Hi
I am not sure firmware-> upgrade option will always get you on to STOCK firmware.
Is your phone rooted, have you flashed any custom roms?
what is the purpose of you going back to stock?
The way I do is to get/download STOCK firmware dump and flash it through SP Flash tools.
If it is only that you want to run STOCK rom on your phone you can get few from the A116 android development forums.
http://forum.xda-developers.com/forumdisplay.php?f=2345
Be careful while flashing anything through SP Flash tools, like you can not flash a recovery flashable zip through SP Flashtools. There are ROMS meant to be flashed in a specific way.
SO READ EVERYTHING BEFORE YOU DO, and flash at your own risk.
--- I am not responsible If something goes wrong with your device, flash at your own risk.
I think so u r removing the battery while updating...??
And drivers issue is with me too..connect the device with PC doesn't gets detected...unplug it and dem connect again.
Sent from my Micromax A116 using xda premium
i recently rooted my friend phone micromax A34 and the next day after rebooting the mobile touch not working
i downloaded the stock firmware which is in .pac format but i dont know how to flash it i used researchdownload tool but it giving me buadrate error... and i stuck there i also converted the rom into a flashable zip format but still dont know how to flash it...... help me....:crying::crying:
About phone :-
spectrum chipset ( sc6820 )
recovery locked
cant enter fastboot mode
adb working
mdpi device
can on the phone normally but touch not working ......
BRO....
princemouli said:
i recently rooted my friend phone micromax A34 and the next day after rebooting the mobile touch not working
i downloaded the stock firmware which is in .pac format but i dont know how to flash it i used researchdownload tool but it giving me buadrate error... and i stuck there i also converted the rom into a flashable zip format but still dont know how to flash it...... help me....:crying::crying:
About phone :-
spectrum chipset ( sc6820 )
recovery locked
cant enter fastboot mode
adb working
mdpi device
can on the phone normally but touch not working ......
Click to expand...
Click to collapse
bro.. Did you do any changes to the boot.img. If you did that it may show error.. Dont know what exactly the problem is. may be you might have downloaded the wrong boot image into your phone. Thats y..
praderj said:
bro.. Did you do any changes to the boot.img. If you did that it may show error.. Dont know what exactly the problem is. may be you might have downloaded the wrong boot image into your phone. Thats y..
Click to expand...
Click to collapse
brother i did not made any changes in boot.img and here the problem is iam unable to flash the stock rom............
hey guys,
can any1 help me as i have bootlooped my panasonic t31
the biggest problem is that i dont have recovery
if i had i would have hard reseted my phone then it would have become ok
could some1 pls help me flash a recovery in my phone via sp tools.
pls its a request
I don't think you can do that. I had the same problem when trying to flash CWM and got boot loop. And when i tried to flash the recovery with so flash tool it said it is a secure base brand chip and needs authentication file. I think its boot loader is locked. But i managed to flash Stock with sugar mtk flash tool.best of luck dude
BKhandual said:
I don't think you can do that. I had the same problem when trying to flash CWM and got boot loop. And when i tried to flash the recovery with so flash tool it said it is a secure base brand chip and needs authentication file. I think its boot loader is locked. But i managed to flash Stock with sugar mtk flash tool.best of luck dude
Click to expand...
Click to collapse
Hello dude
m having problem with sugar mtk flash tool while flashing can u help me out???
stucks at : status :[ com6] download DA now...63.86kb/63.86kb.... :crying:
#noob
Make sure u have good internet connection and don't use the latest version of sugar mtk. Use v2.* version. Try to google and pm me if u r unable to find it
Sent from my Lenovo A536 using XDA-Developers mobile app
i have micromax A311 with TWRP 3.0.2.0 and custom ROM miui 5.9.1 .Todau I tried to flash cyanogenmod , but it was taking to much time to flash so I removed the battery and after restarting it was bootlooped and later I formatted the data also. I had a backup of that miui rom but that is also not restoring, showing some error 255.I had the bakup on external sd.please help me out .and yes the back-up created by me was by aTWRP 2.4.4 and now I have 3.0.2.0 for restore. please help me out
flash stock rom provided by xda developers
tushar.phogat said:
i have micromax A311 with TWRP 3.0.2.0 and custom ROM miui 5.9.1 .Todau I tried to flash cyanogenmod , but it was taking to much time to flash so I removed the battery and after restarting it was bootlooped and later I formatted the data also. I had a backup of that miui rom but that is also not restoring, showing some error 255.I had the bakup on external sd.please help me out .and yes the back-up created by me was by aTWRP 2.4.4 and now I have 3.0.2.0 for restore. please help me out
Click to expand...
Click to collapse
You must download the zip file of firmware from your pc , then transfer file to SD card, and then flash it
If you are able to reboot to recovery, downgrade the recovery to 2.4.4 and then restore the backup. I think the twrp 3.0.2 is a flashable zip file that contain a file recovery.img. Just unzip it then delete the recovery.img file. Rename your twrp 2.4.4 to recovery.img and copy it to the unzipped folder and zip it. Then flash the zip through recovery, now your twrp will be downgraded to 2.4.4. Reboot and restore the backup.
shaijuvjohn said:
If you are able to reboot to recovery, downgrade the recovery to 2.4.4 and then restore the backup. I think the twrp 3.0.2 is a flashable zip file that contain a file recovery.img. Just unzip it then delete the recovery.img file. Rename your twrp 2.4.4 to recovery.img and copy it to the unzipped folder and zip it. Then flash the zip through recovery, now your twrp will be downgraded to 2.4.4. Reboot and restore the backup.
Click to expand...
Click to collapse
I have bricked my micromax a311 as I was trying to flash custom rom i have flushed old rom and by mistake I have restarted mobile after doing that and now its stuck in logo. Main problem is Mobile showing in factory mode not able flash from ygdp and not getting boot in recovery as adb showing unauthorized or not detected and I cant swith on as mobile is bricked. If any how i can boot in recovery i can flash rom but its not happening nether it getting flashed from ygdp or sp flash tool. Please provide me solution for getting my mobile alive.
aalia12 said:
I have bricked my micromax a311 as I was trying to flash custom rom i have flushed old rom and by mistake I have restarted mobile after doing that and now its stuck in logo. Main problem is Mobile showing in factory mode not able flash from ygdp and not getting boot in recovery as adb showing unauthorized or not detected and I cant swith on as mobile is bricked. If any how i can boot in recovery i can flash rom but its not happening nether it getting flashed from ygdp or sp flash tool. Please provide me solution for getting my mobile alive.
Click to expand...
Click to collapse
If you are flashing stock rom by ygdp then follow these.
Never connect your phone to usb before.
Click config and "select CPB file"
Then select the firmware file which will be in .CPB format.
Wait for about 3-5 mins for ygdp to verify the cpb file.
When verify finishes turn off your phone and REMOVE THE BATTERY.
Click "Start" button in YGDP tools, it will show entering download mode.
Then connect the phone to the computer. DO NOT insert the battery.
You will see that the flashing will start. DO NOT DO ANYTHING till it finishes.
After it shows finished, remove the phone, insert battery and turn on.
Done.
shaijuvjohn said:
If you are flashing stock rom by ygdp then follow these.
Never connect your phone to usb before.
Click config and "select CPB file"
Then select the firmware file which will be in .CPB format.
Wait for about 3-5 mins for ygdp to verify the cpb file.
When verify finishes turn off your phone and REMOVE THE BATTERY.
Click "Start" button in YGDP tools, it will show entering download mode.
Then connect the phone to the computer. DO NOT insert the battery.
You will see that the flashing will start. DO NOT DO ANYTHING till it finishes.
After it shows finished, remove the phone, insert battery and turn on.
Done.
Click to expand...
Click to collapse
Done but still flash is not happening it get stuck at 98% also seen guideline of YL-params.bin file still getting stuck at 98%. Tried all possible method but cant flash as its on factory mode and to remove factory mode need adb and adb is not getting detect as bricked. also cant go to recovery with adb command as its not detection. I need either factory rom which can get flashed on factory mode or any other method to remove factory mode or any other method to get phone boot in to recovery without adb then only i can make my phone live once again.
aalia12 said:
Done but still flash is not happening it get stuck at 98% also seen guideline of YL-params.bin file still getting stuck at 98%. Tried all possible method but cant flash as its on factory mode and to remove factory mode need adb and adb is not getting detect as bricked. also cant go to recovery with adb command as its not detection. I need either factory rom which can get flashed on factory mode or any other method to remove factory mode or any other method to get phone boot in to recovery without adb then only i can make my phone live once again.
Click to expand...
Click to collapse
Probably it may work with the trick here. http://forum.xda-developers.com/a310/help/how-to-fix-ygpd-stuck-98-flashing-stock-t3380064
Read the instructions and give a try. :good:
shaijuvjohn said:
Probably it may work with the trick here. http://forum.xda-developers.com/a310/help/how-to-fix-ygpd-stuck-98-flashing-stock-t3380064
Read the instructions and give a try. :good:
Click to expand...
Click to collapse
I have tried its not happening as its on factory mode which don't allow to flash rom
Is canvas nitro 2 E311 and canvas nitro 2 A311 same??
I mean can flash a A311 rom onto E311,
Will it work...
Plz help,, coz there are no roms for E311.
Eshwar123 said:
Is canvas nitro 2 E311 and canvas nitro 2 A311 same??
I mean can flash a A311 rom onto E311,
Will it work...
Plz help,, coz there are no roms for E311.
Click to expand...
Click to collapse
Both are different dont put any stock rom which is not made for your device or else your device will get dead completely
You can find your stock rom here https://www.skyneel.com/new-update-micromax-e311-canvas-nitro-2-stock-rom-v4-kitkat
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
aalia12 said:
I have tried its not happening as its on factory mode which don't allow to flash rom
Click to expand...
Click to collapse
Waiting for solution is there any way i can boot my mobile in recovery mode from getting boot from sd card. If possible please let me know procedure
@aalia12
I already have the stock rom,..
I was asking about custom roms...
Or any other perfectly working custom roms for E311??
Eshwar123 said:
@aalia12
I already have the stock rom,..
I was asking about custom roms...
Or any other perfectly working custom roms for E311??
Click to expand...
Click to collapse
Check this link if you can find any rom
http://forum.xda-developers.com/android/development/micromax-canvas-nitro-2-e311-custom-rom-t3157748
Can anyone please help me to port a TWRP or similiar to my phone? I've tried all the threads and forums for porting to MTK devices and I coudn't port it seems it doesn't on MTK 67XX devices.
I'll be very gratefull.
Link for stock recovery https:// drive.google.com/open?id=0B0M07vEulBG8cUZtS192aUtKVGs
Device: Ulefone Gemini
Model: Gemini
Android: 6.0
MTK: MTK 6737T
Dersaun said:
Can anyone please help me to port a TWRP or similiar to my phone? I've tried all the threads and forums for porting to MTK devices and I coudn't port it seems it doesn't on MTK 67XX devices.
I'll be very gratefull.
Link for stock recovery https:// drive.google.com/open?id=0B0M07vEulBG8cUZtS192aUtKVGs
Device: Ulefone Gemini
Model: Gemini
Android: 6.0
MTK: MTK 6737T
Click to expand...
Click to collapse
Hello, you can try out the TWRP recovery I ported. Let me know how it goes. You can flash it via SP Flashtool with your scatter file.
https://
drive.google.com/open?id=0B7kR2R8eQnonemtaY056dWZxRXc
Christianihechi said:
Hello, you can try out the TWRP recovery I ported. Let me know how it goes. You can flash it via SP Flashtool with your scatter file.
https://
drive.google.com/open?id=0B7kR2R8eQnonemtaY056dWZxRXc
Click to expand...
Click to collapse
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Dersaun said:
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Click to expand...
Click to collapse
Thanks!!! It worked.
But the touch screen doesnt work there is a way too fix it?
Dersaun said:
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Click to expand...
Click to collapse
Really You can try re-flashing it and boot into recovery directly via button combos. In the meantime, I will try to port another and post link.
Dersaun said:
Thanks!!! It worked.
But the touch screen doesnt work there is a way too fix it?
Click to expand...
Click to collapse
Yeap. Stick around, I will get back to you.
Try this and let me know if touch works.
https
://drive.google.com/file/d/0B7kR2R8eQnonekFaUU1qUDI0dG8/view?usp=drivesdk
i been also trying to install twrp on my ulefone gemini... i tryed Christianihechi recovery files.. on both of the files the touch screen didnt work...
Christianihechi said:
Try this and let me know if touch works.
https
://drive.google.com/file/d/0B7kR2R8eQnonekFaUU1qUDI0dG8/view?usp=drivesdk
Click to expand...
Click to collapse
Hi, I tried this one too and also touch didn't work. One more thing I try to used with an OTG mouse to make a backup and after use it my phone got stuck in ulefone logo. I have to unbrick with sp flash tool.
i was able to root my gemini... using the last recovery that Christianihechi give us... i flashed the recovery, got into recovery "touch doesnt work so i connected a usb mouse" and i was able to swape to continue, install supersu zip file, exit from recovery reboot disconect the usb mouse and let the phone boot... and it works fine :laugh:
Wow. That sounds real good. Kudos.
---------- Post added at 04:35 PM ---------- Previous post was at 04:30 PM ----------
I got another one for you guys(thanks to @jemmini). Download from here
http://
www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. You can give it a shot.
cesarcpp1 said:
i was able to root my gemini... using the last recovery that Christianihechi give us... i flashed the recovery, got into recovery "touch doesnt work so i connected a usb mouse" and i was able to swape to continue, install supersu zip file, exit from recovery reboot disconect the usb mouse and let the phone boot... and it works fine :laugh:
Click to expand...
Click to collapse
Dersaun said:
Hi, I tried this one too and also touch didn't work. One more thing I try to used with an OTG mouse to make a backup and after use it my phone got stuck in ulefone logo. I have to unbrick with sp flash tool.
Click to expand...
Click to collapse
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Success Root twrp
Thank you ! It worked perfectly
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
Thank you it work perfct!
Hi,
Now that nougat update has just got out, do you think root will still work?
tryed with nougat update and rooted fine
Hello where can i find a nougat preview rom for the ulefone gemini thanks!
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
I've flashed this recovery via SP Flash Tool but when I try to turn on the smartphone in recovery mode the OS gets booted. If I try to use adb reboot recovery I only get a dead droid with the no command prompt. What am I doing wrong?
EDIT: nvm changing SP Flash Tool version did the trick
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
Hai Bro,i m using a china unbranded phone mtk 6737T android 6.01+ and can i use this recovery to sp flash to root my phone ? Thank.