As you can see the title of the thread , I just want to know if i could remove rom (SamHD) and i also want to unroot my canvas hd so is there anyway that i could do this....!!! , Then Please Tell Me ASAP
Thanks
zachlevi said:
As you can see the title of the thread , I just want to know if i could remove rom (SamHD) and i also want to unroot my canvas hd so is there anyway that i could do this....!!! , Then Please Tell Me ASAP
Thanks
Click to expand...
Click to collapse
Reflash Stock rom via sp tools.
hell1134 said:
Reflash Stock rom via sp tools.
Click to expand...
Click to collapse
Actually the problem i am facing is that i am using windows 8 X64 and whenever i switch off my phone and connect the usb to computer it doesn't connect my phone :/ and it won't let me flash the stock firmware...!!!
I have installed all the drivers there are for X64 windows...!!!
zachlevi said:
I have installed all the drivers there are for X64 windows...!!!
Click to expand...
Click to collapse
We all have issues with Drivers on 64 bit windows,
try below thread to install drivers properly.
forum.xda-developers.com/showthread.php?t=2206421
-- I am not responsible if some thing goes wrong with your device, use at your own risk
Please Someone Help Me...???
I want to flash stock firmware but i can't because i have windows 8 X64 Bits.
I have successfully installed the drivers, but when i click on Firmware> Upgrade it shows a red color..??? /:
In this process the Progress bar become RED 100%,Then it shows me a screen saying "Sp Flash Tools Error : (8200), What does this means and how am i suppose to have stock firmware....???
zachlevi said:
In this process the Progress bar become RED 100%,Then it shows me a screen saying "Sp Flash Tools Error : (8200), What does this means and how am i suppose to have stock firmware....???
Click to expand...
Click to collapse
Use the latest version of SP Flash tool. That must solve your problem.
Hi
I am not sure firmware-> upgrade option will always get you on to STOCK firmware.
Is your phone rooted, have you flashed any custom roms?
what is the purpose of you going back to stock?
The way I do is to get/download STOCK firmware dump and flash it through SP Flash tools.
If it is only that you want to run STOCK rom on your phone you can get few from the A116 android development forums.
http://forum.xda-developers.com/forumdisplay.php?f=2345
Be careful while flashing anything through SP Flash tools, like you can not flash a recovery flashable zip through SP Flashtools. There are ROMS meant to be flashed in a specific way.
SO READ EVERYTHING BEFORE YOU DO, and flash at your own risk.
--- I am not responsible If something goes wrong with your device, flash at your own risk.
I think so u r removing the battery while updating...??
And drivers issue is with me too..connect the device with PC doesn't gets detected...unplug it and dem connect again.
Sent from my Micromax A116 using xda premium
Related
hello,
i recently bought a micromax q355 which has mtk-mt-6582 chipset and rooted it using kingroot
the problem is i couldn't port any of the custom recoveries for my phoe i've tried all methods ie. cwm from mtk droid tools easy magic tools all versions (philz,twrp,carliv etc.) none of them worked!
all i get is error (no split image) or (cant find kernel.gz)
else the tool installs a recovery but shows a blank screen while in recovery mode.
and the phone fails to boot (had to reflash stock boot.img recovery.img and uboot.bin to make it boot again)
so if anyone can please provide any alternate solution.
details of my phone
maker: micromax
model: micromax q 355
android ver: 5.0
kernel ver: 3.10.54+
se linux: yes (permissive)
chipset: mediatek mt-6582
thanks
if you want to flash something from recovery you can use rashr from play store
Send me The Stock Recovery Ill Try My Level Best To Give u Recovery
charansai said:
Send me The Stock Recovery Ill Try My Level Best To Give u Recovery [/QUOi cant find custom recovery for micromax canvas play q355.......can u hepl me?
Click to expand...
Click to collapse
Presenting U TWRP For q355 tested and working fine
https://www.androidfilehost.com/?fid=24591000424952469
Hit Thanks If U Love It
twrp recovery error
Can't backup/restore properly using above recovery..... Also it shows status 7 error (errir in metadata_recursive)while flashing custom rom...please help
Use Philz Automatic Installer
https://forum.xda-developers.com/showthread.php?t=2748169
If your installed recovery shows a black screen , Im sure the PC you have has Win10
I suggest you to try the Tool in Windows 8.1 , Compatibility mode wont work , Im not sure why.
Still if this doesnt work , make sure your device are installed properly, I suggest you to install pda4net.
If any of the above suggestions donot work , contact me , I'll port manually for you
hry1607 said:
Can't backup/restore properly using above recovery..... Also it shows status 7 error (errir in metadata_recursive)while flashing custom rom...please help
Click to expand...
Click to collapse
In recovery you get status 7 error because it may be you trying to flash rom that not compatible to your phone.
Status 7 error is caused your rom updater script check your system for same model number for compatibility.
If you want solution go to these guide.
Ashwinrg said:
In recovery you get status 7 error because it may be you trying to flash rom that not compatible to your phone.
Status 7 error is caused your rom updater script check your system for same model number for compatibility.
If you want solution go to these guide.
Click to expand...
Click to collapse
No i have checked it .... There is nothing like assert in my updater script and also the recovery backup/restore not working properly..... I need a new recovery
akash14darshan said:
Use Philz Automatic Installer
https://forum.xda-developers.com/showthread.php?t=2748169
If your installed recovery shows a black screen , Im sure the PC you have has Win10
I suggest you to try the Tool in Windows 8.1 , Compatibility mode wont work , Im not sure why.
Still if this doesnt work , make sure your device are installed properly, I suggest you to install pda4net.
If any of the above suggestions donot work , contact me , I'll port manually for you
Click to expand...
Click to collapse
I can't find any installer (attachments) please help
hry1607 said:
I can't find any installer (attachments) please help
Click to expand...
Click to collapse
I dont why the download section has been removed ,
So here you go
https://mega.nz/#!nQUzAKrA!mXOVPvhD9-c8GwcEMv0o-HcrKy8XiPy65v0dtyobqHQ
Hit the Thanks Button , It would give me a good start
Cheers
not working
The recovery not working on my phone... When i boot into recovery the screen gradually brightens up till it becomes white and then the phone reboots normally.., please help
sir, plz update micromax q355 in marshmallow
Hey.
I have a fairly old phone. I don't have those big flagship phones, like Samsung, or HTC, or Google, or anything. I'm a poor student, and have an old MTK android phone. I currently live in Bangladesh, so..... I have an Okapia Magic. (Do a google search!)
I rooted it yesterday, using kingroot apk, and checked it with root checker. Root was successful. I installed and then uninstalled Busybox, and installed Xposed framework. I installed, activated some modules, like Gravitybox KK and adblocker. Later, I uninstalled Gravitybox. My phone didn't have a custom recovery, so I thought I could flash TWRP on it, and then a custom ROM I had downloaded before. I tried to install twrp, but failed. Then, I used SP Flash Tool to flash a rom, but my scatter file had some errors, (comment for errors below). I formatted it using sp flash tool, and now my whole damn phone is empty... (Sorry for my language, excuse me.)
Now, I need it fixed ASAP, also, I'm broke. How do I fix my phone now ? It doesn't boot. It doesn't do anything, no recovery, nothing.
The device was running android 4.4.2, and its an mtk6572.
Pls halp, asap.
Thanks, in advance,
A student.
Unless you know what you're doing or you have a ROM backup, you never format your phone.... NEVER. Anyways what were the errors in SP Flash Tool?
Error
kirito9 said:
Unless you know what you're doing or you have a ROM backup, you never format your phone.... NEVER. Anyways what were the errors in SP Flash Tool?
Click to expand...
Click to collapse
The error was 4032.
RocketBanana said:
The error was 4032.
Click to expand...
Click to collapse
This error is quite easy to solve. Take out the battery and flash the preloader of the Stock ROM. The flash then entire ROM after then preloader's been flashed.
Help for stock rom
kirito9 said:
This error is quite easy to solve. Take out the battery and flash the preloader of the Stock ROM. The flash then entire ROM after then preloader's been flashed.
Click to expand...
Click to collapse
The stock ROM I downloaded from androidmtk.com didn't work. SP Flash tools showed the error 4032, saying that DRAM failed, and please check the loading target matches......etc etc......
What do I do now ? Can someone help me find a working stock rom ? Or maybe just help me get the preloader / recovery ?
TIA,
Rocket Banana.
Hard bricked my canvas nitro.
I m dumb tried to flash a ROM at 2% battery..... everything's ded.
No recovery. No fastboot. Broken logo.bin.
Phone is detected in so flash tools... but when I flash the original firmware.. it gives me error brom_cmd_jump_da_fail... same with ygdp
.
Plx help
TSG756 said:
Hard bricked my canvas nitro.
I m dumb tried to flash....
..Plx help
Click to expand...
Click to collapse
Which ROM did you try?
Was it meant for your device?
And as far as I know if its really a hard brick you'll need JTAG for it to be recovered.
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Did your recovery mode working or not? If it is then download any custom rom, place it on your external sd card and flash it. If not get the stock and flash it through Sp flash tool
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
Me too having the same issue and no recovery, no factory mode and either fastboot bode also not working . What do i do now ?? Any solution.. I just wanna restore it as stock one..
U will try YGDP TOOL
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
reis1996 said:
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
Click to expand...
Click to collapse
Check this, may be it is helpful
https://forum.xda-developers.com/showpost.php?p=68672696&postcount=5
Bricked micromax canvas a 311
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Jithin James said:
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Click to expand...
Click to collapse
At most you can install a custom recovery using fastboot (google it) and then install a ROM through it
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Deadman jo said:
Bros...help me to unbrick My HCL me connect 3G 2.0 tab...i need the stock rom?
Click to expand...
Click to collapse
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
i need HCL me connect 3G 2.0tabs Stock recovery
Deadman jo said:
i need HCL me connect 3G 2.0tabs Stock recovery
Click to expand...
Click to collapse
Stock recovery should be included in the stock rom package unless you mean custom recovery.
MigoMujahid said:
Here you go :
https://docs.google.com/uc?id=0B0DGQDSsarOAdG1pd1pZTjFobE0&export=download
Click to expand...
Click to collapse
Bro i cant flash this rom on sp flash tool
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
As far as i know, you use mp tool not sp flash tool.
http://hulkload.com/pjj60j5hx6mt
Deadman jo said:
Bro i cant flash this rom on sp flash tool
Click to expand...
Click to collapse
this rom only flash with stock recovery im lost my stock recovery..
Flash with Digma iDND7 firmware.
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
I have one but the file is locked ... since a year now
Also I tried flashing the stock rom gives this error :
Error: Invalid partition setting
17: fat 979e8000:84de8000
installation aborted
Please help or suggest
++++++++++++++++++++++++++++++++++++
Deadman jo said:
this rom only flash with stock recovery im lost my stock recovery..
Click to expand...
Click to collapse
So there is an update I was able to successfully Flash a firmware from same board which was used by HCL me connect 3G 2.0.
I searched this for 3 days and found that Digma idnd 7 tab used the same board , so I hunted for Digma firmware and luckily got them, the file link contains both ota and Flash file via MP tool.
I tried ota update but I got the same error.
So I used MP flash tool v5.1352.01
Download adb drivers of HCL me tablet.
Extract the zip, then edit the scatter file name to "MT6577_Android_scatter_emmc".
Now open SP flash tool and choose the scatter.
Click on download and then plug the tab in using the USB.
Then I got some PMT file needs to be updated error which was fixed by the next step.
Stop the download, pull the device out, then click Format options in the 2nd tab and then "Format except Bootloader".
Plug the device in.
once the format is done, plug out again, click download(make sure scatter is selected).
Plug in the device.
It will start flashing.
File links :
HCL USB drivers : androidmtkDOTcom/download-hcl-usb-driver
SP flash links : androidmtkDOTcom/smart-phone-flash-tool
Digma original firmware : Unable to post link so : use google and search supportdotdigma
ps: may be this helps digmaDOTru/catalog/item/1344
Also you will need to change the language to English after Booting up.
Click on the equalizer>> click on icon marked A[use some common sense that's what I did xD] then inside that tap on the very , top of the submenu, you will get the option to change to English.
Please let me know if if works for you. Or you need any thing.
I try to flash Oxygen Os rom for my device mi 8 (a idiot youtuber said that can be flash in all devices) and result that my devices stuck on miui with android 8 and can't upload or flash any rom than android 8. Can someone tell me what i have to do or have a guide
Sorry for my bad English
Can you acess TWRP?
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatible ROM with this tool.
HugoSilva said:
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatib
Click to expand...
Click to collapse
HugoSilva said:
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatible ROM with this tool.
Click to expand...
Click to collapse
HugoSilva said:
If yes, connect your phone to PC and flash via ADB. If you dont know how to do it, use this tool (Program) and flash a new and compatible ROM with this too
Click to expand...
Click to collapse
Thanks bro, but actually i have to solve my problem follow this guy https://forum.xda-developers.com/t/for-people-stuck-on-oreo-firmware-poco-f1.4233085/ and well, it not working, i don't know what i have to do with your guide, your program, can u explain me how to use this pls
Mkuong said:
Thanks bro, but actually i have to solve my problem follow this guy https://forum.xda-developers.com/t/for-people-stuck-on-oreo-firmware-poco-f1.4233085/ and well, it not working, i don't know what i have to do with your guide, your program, can u explain me how to use this pls
Click to expand...
Click to collapse
the link you provide is for Poco F1
With the program i sent you you can flash original firmware to your phone.
Just plug your phone to PC then open fastboot mode ( POWER + DOWN) and then open the program, than flash original firmware!
Should work