i have micromax A311 with TWRP 3.0.2.0 and custom ROM miui 5.9.1 .Todau I tried to flash cyanogenmod , but it was taking to much time to flash so I removed the battery and after restarting it was bootlooped and later I formatted the data also. I had a backup of that miui rom but that is also not restoring, showing some error 255.I had the bakup on external sd.please help me out .and yes the back-up created by me was by aTWRP 2.4.4 and now I have 3.0.2.0 for restore. please help me out
flash stock rom provided by xda developers
tushar.phogat said:
i have micromax A311 with TWRP 3.0.2.0 and custom ROM miui 5.9.1 .Todau I tried to flash cyanogenmod , but it was taking to much time to flash so I removed the battery and after restarting it was bootlooped and later I formatted the data also. I had a backup of that miui rom but that is also not restoring, showing some error 255.I had the bakup on external sd.please help me out .and yes the back-up created by me was by aTWRP 2.4.4 and now I have 3.0.2.0 for restore. please help me out
Click to expand...
Click to collapse
You must download the zip file of firmware from your pc , then transfer file to SD card, and then flash it
If you are able to reboot to recovery, downgrade the recovery to 2.4.4 and then restore the backup. I think the twrp 3.0.2 is a flashable zip file that contain a file recovery.img. Just unzip it then delete the recovery.img file. Rename your twrp 2.4.4 to recovery.img and copy it to the unzipped folder and zip it. Then flash the zip through recovery, now your twrp will be downgraded to 2.4.4. Reboot and restore the backup.
shaijuvjohn said:
If you are able to reboot to recovery, downgrade the recovery to 2.4.4 and then restore the backup. I think the twrp 3.0.2 is a flashable zip file that contain a file recovery.img. Just unzip it then delete the recovery.img file. Rename your twrp 2.4.4 to recovery.img and copy it to the unzipped folder and zip it. Then flash the zip through recovery, now your twrp will be downgraded to 2.4.4. Reboot and restore the backup.
Click to expand...
Click to collapse
I have bricked my micromax a311 as I was trying to flash custom rom i have flushed old rom and by mistake I have restarted mobile after doing that and now its stuck in logo. Main problem is Mobile showing in factory mode not able flash from ygdp and not getting boot in recovery as adb showing unauthorized or not detected and I cant swith on as mobile is bricked. If any how i can boot in recovery i can flash rom but its not happening nether it getting flashed from ygdp or sp flash tool. Please provide me solution for getting my mobile alive.
aalia12 said:
I have bricked my micromax a311 as I was trying to flash custom rom i have flushed old rom and by mistake I have restarted mobile after doing that and now its stuck in logo. Main problem is Mobile showing in factory mode not able flash from ygdp and not getting boot in recovery as adb showing unauthorized or not detected and I cant swith on as mobile is bricked. If any how i can boot in recovery i can flash rom but its not happening nether it getting flashed from ygdp or sp flash tool. Please provide me solution for getting my mobile alive.
Click to expand...
Click to collapse
If you are flashing stock rom by ygdp then follow these.
Never connect your phone to usb before.
Click config and "select CPB file"
Then select the firmware file which will be in .CPB format.
Wait for about 3-5 mins for ygdp to verify the cpb file.
When verify finishes turn off your phone and REMOVE THE BATTERY.
Click "Start" button in YGDP tools, it will show entering download mode.
Then connect the phone to the computer. DO NOT insert the battery.
You will see that the flashing will start. DO NOT DO ANYTHING till it finishes.
After it shows finished, remove the phone, insert battery and turn on.
Done.
shaijuvjohn said:
If you are flashing stock rom by ygdp then follow these.
Never connect your phone to usb before.
Click config and "select CPB file"
Then select the firmware file which will be in .CPB format.
Wait for about 3-5 mins for ygdp to verify the cpb file.
When verify finishes turn off your phone and REMOVE THE BATTERY.
Click "Start" button in YGDP tools, it will show entering download mode.
Then connect the phone to the computer. DO NOT insert the battery.
You will see that the flashing will start. DO NOT DO ANYTHING till it finishes.
After it shows finished, remove the phone, insert battery and turn on.
Done.
Click to expand...
Click to collapse
Done but still flash is not happening it get stuck at 98% also seen guideline of YL-params.bin file still getting stuck at 98%. Tried all possible method but cant flash as its on factory mode and to remove factory mode need adb and adb is not getting detect as bricked. also cant go to recovery with adb command as its not detection. I need either factory rom which can get flashed on factory mode or any other method to remove factory mode or any other method to get phone boot in to recovery without adb then only i can make my phone live once again.
aalia12 said:
Done but still flash is not happening it get stuck at 98% also seen guideline of YL-params.bin file still getting stuck at 98%. Tried all possible method but cant flash as its on factory mode and to remove factory mode need adb and adb is not getting detect as bricked. also cant go to recovery with adb command as its not detection. I need either factory rom which can get flashed on factory mode or any other method to remove factory mode or any other method to get phone boot in to recovery without adb then only i can make my phone live once again.
Click to expand...
Click to collapse
Probably it may work with the trick here. http://forum.xda-developers.com/a310/help/how-to-fix-ygpd-stuck-98-flashing-stock-t3380064
Read the instructions and give a try. :good:
shaijuvjohn said:
Probably it may work with the trick here. http://forum.xda-developers.com/a310/help/how-to-fix-ygpd-stuck-98-flashing-stock-t3380064
Read the instructions and give a try. :good:
Click to expand...
Click to collapse
I have tried its not happening as its on factory mode which don't allow to flash rom
Is canvas nitro 2 E311 and canvas nitro 2 A311 same??
I mean can flash a A311 rom onto E311,
Will it work...
Plz help,, coz there are no roms for E311.
Eshwar123 said:
Is canvas nitro 2 E311 and canvas nitro 2 A311 same??
I mean can flash a A311 rom onto E311,
Will it work...
Plz help,, coz there are no roms for E311.
Click to expand...
Click to collapse
Both are different dont put any stock rom which is not made for your device or else your device will get dead completely
You can find your stock rom here https://www.skyneel.com/new-update-micromax-e311-canvas-nitro-2-stock-rom-v4-kitkat
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
aalia12 said:
I have tried its not happening as its on factory mode which don't allow to flash rom
Click to expand...
Click to collapse
Waiting for solution is there any way i can boot my mobile in recovery mode from getting boot from sd card. If possible please let me know procedure
@aalia12
I already have the stock rom,..
I was asking about custom roms...
Or any other perfectly working custom roms for E311??
Eshwar123 said:
@aalia12
I already have the stock rom,..
I was asking about custom roms...
Or any other perfectly working custom roms for E311??
Click to expand...
Click to collapse
Check this link if you can find any rom
http://forum.xda-developers.com/android/development/micromax-canvas-nitro-2-e311-custom-rom-t3157748
Related
Hi. i want to request for a flashable zip file of stock rom for my canvas nitro a311. Because i tried installing it via ygdp tool but can't succeed.
And i am thinking about a solution that
i have a friend who is using the same phone so can i install twrp recovery and backup his rom and the copy it to my memory card and wipe data cache and then restore the backup.
Would it help me to get back my stock rom?????
Please reply if the upper methode works
I am also facing the same problem. My phone is having bootload problem due to my foolishness. I made some changes in attributes of system/font folder and it all messed up. My phone is rooted but not has flash recovdery of cmw or others
I downloaded stock rom to flash but ygdp is not helping out? Does ygdp need to be run on XP ? i am on win10?
Please help i want my phone back ...
Is there anyway to install flash recovery on rooted phone but bricked/bootloop?
please please help ...
Thanks in advance...
No ygdp tool does not need xp just run it in compatibility mode for win 7 and also as administrator ..
But i can't flash the stock rom via ygdp
Use ygdp tool with capability as win8.there are some simple steps for supporting ygdp.you can see at our official page (pinned). That will help you.That is working for me
Sent from my Micromax A311 using XDA Free mobile app
Can u give me step by step guide for how to flash using ygdp tool..
Because i already installed adb driver and mtk preloader drivers successfully but still dont get the download icon when connect my phone wih usb cable at switched off state.
I am using a311 with twrp custom recovery and miui 7 5.10.15 rom
Thnxx in advance if u or anybody wants to help....:good::good::good:
Fisrt install USB Driver from usb for micromax through device manager , Plug usb to pc and
connect mobile withour battery with volume key up.
It will detect the phone and will show yellow mark in device manager
then press on update driver and browse the usb driver folder
let the driver install
Now install/run (Password is 369) ygdp and click config and browse the firmware file
press apply until it extract the zip
now press start and connect phone without battery
let the process complete it will take around 10 minutes
Cheers
---------- Post added at 05:20 AM ---------- Previous post was at 05:11 AM ----------
http://forum.xda-developers.com/a310/help/soft-bricked-a310-3311-internal-storage-t3158012
indyan said:
I am also facing the same problem. My phone is having bootload problem due to my foolishness. I made some changes in attributes of system/font folder and it all messed up. My phone is rooted but not has flash recovdery of cmw or others
I downloaded stock rom to flash but ygdp is not helping out? Does ygdp need to be run on XP ? i am on win10?
Please help i want my phone back ...
Is there anyway to install flash recovery on rooted phone but bricked/bootloop?
please please help ...
Thanks in advance...
Click to expand...
Click to collapse
Visit amaksevn.blogspot.com for full actual stock rom flashing video with full procedure
AmakSevn said:
Visit amaksevn.blogspot.com for full actual stock rom flashing video with full procedure
Click to expand...
Click to collapse
Thanks amamsevn ,
But i flashed the rom with no issue. I was actually flashing with battery , Removed it and now it was flashed.
Could you please help me with flashing custom recovery? I want to flash cwm or TWRP 2.8.6 on my micromax a311 . Currently i am on twrp 2.4.4 with mobile uncle but want to upgrade it.
Tried several times with lots of recoveries but all the time i lost network and i have to flash rom
Kindly help me with tool and recovery version and procedure to flash.
Thanks in advance.
that's it
Install drivers ....download ygpd....enjoy
indyan said:
Thanks amamsevn ,
But i flashed the rom with no issue. I was actually flashing with battery , Removed it and now it was flashed.
Could you please help me with flashing custom recovery? I want to flash cwm or TWRP 2.8.6 on my micromax a311 . Currently i am on twrp 2.4.4 with mobile uncle but want to upgrade it.
Tried several times with lots of recoveries but all the time i lost network and i have to flash rom
Kindly help me with tool and recovery version and procedure to flash.
Thanks in advance.
Click to expand...
Click to collapse
To Download TWRP 2.8.6 Click Here
I currently have twrp 2.4.4
Can i flash this version with mobile uncle tool??
Orr i have to first go to my stock recovery??
Hey. Please help me.. i just tried to flash cyanogenmod 12.1 final posted today but it failed...i am using twrp 2.4.4.
so i have to know if the new roms does not support the older version or i am doing somethung wrong??
i formated data,wiped cache,delvik cache,internal
then flashed the rom..but every time failed..
Please guide meeee...
AmakSevn said:
To Download TWRP 2.8.6 Click Here
Click to expand...
Click to collapse
This is not twrp v 2.8.6
It's v 2.4.4 which I already have..
AmakSevn said:
To Download TWRP 2.8.6 Click Here
Click to expand...
Click to collapse
I donwloaded TWRP 2.8.6 but not able to flash it?
Used mobile uncle which failed
Flashify Hanged
Other method plz
---------- Post added at 09:24 AM ---------- Previous post was at 09:21 AM ----------
payel123 said:
This is not twrp v 2.8.6
It's v 2.4.4 which I already have..
Click to expand...
Click to collapse
Ya I am having the same version i.e. 2.4.4 and not able to upgrade.
wanted to flash custom rom cyanogenmod-12-1 but twrp is not upgarding
which tool i should use to flash twrp 2.8.6 recovery.
payel123 said:
This is not twrp v 2.8.6
It's v 2.4.4 which I already have..
Click to expand...
Click to collapse
Its TWRP 2.8.6 payel,
I flashed with it and version is showing 2.8.6
@payel123 here is stock rom flashable zip via twrp recovery
http://forum.xda-developers.com/a310/orig-development/rom-twrp-flashable-micromax-canvas-t3287008
I m also has the twrp but I can't able to flash stock rom through ygdp tool I tried alot
Plzz help me
Plzz
i flashed using ygdp please help
Amal M S said:
Use ygdp tool with capability as win8.there are some simple steps for supporting ygdp.you can see at our official page (pinned). That will help you.That is working for me
Sent from my Micromax A311 using XDA Free mobile app
Click to expand...
Click to collapse
i flashed using ygdp but then stuck on factory mode scroll and bootloop please help
Hard bricked my canvas nitro.
I m dumb tried to flash a ROM at 2% battery..... everything's ded.
No recovery. No fastboot. Broken logo.bin.
Phone is detected in so flash tools... but when I flash the original firmware.. it gives me error brom_cmd_jump_da_fail... same with ygdp
.
Plx help
TSG756 said:
Hard bricked my canvas nitro.
I m dumb tried to flash....
..Plx help
Click to expand...
Click to collapse
Which ROM did you try?
Was it meant for your device?
And as far as I know if its really a hard brick you'll need JTAG for it to be recovered.
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Did your recovery mode working or not? If it is then download any custom rom, place it on your external sd card and flash it. If not get the stock and flash it through Sp flash tool
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
Me too having the same issue and no recovery, no factory mode and either fastboot bode also not working . What do i do now ?? Any solution.. I just wanna restore it as stock one..
U will try YGDP TOOL
TSG756 said:
Well it wernt a ROM it was magisk . damnit pokego
Well but the I fixed it
... It was just about sp flashtools... I'll probably make a correct thread about it
Click to expand...
Click to collapse
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
reis1996 said:
How did you fix your phone? Micromax a311. My device keeps connecting and disconnecting when I connect to PC. Can you send link for drivers. I have .CBP file for the flash tool
Click to expand...
Click to collapse
Check this, may be it is helpful
https://forum.xda-developers.com/showpost.php?p=68672696&postcount=5
Bricked micromax canvas a 311
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Jithin James said:
My phone is Bricked, I have installed adb, v com drivers yet the pc doesn't recognise the device, i tried both sp flash, ygdp but no use. I can hope fully boot into recovery mode but my phone is not rooted, I don't know how to install rom via recovery mode. Some one please tell me a solution
Click to expand...
Click to collapse
At most you can install a custom recovery using fastboot (google it) and then install a ROM through it
I had twrp installed and then i flashed cm13
A fews days later i flashed xposed using twrp and after flashing, it said that stock recovery was trying to replace twrp and asked to swipe to disable it.
i swiped it.
now when i try to boot to recovery, its stuck at mi logo
everything else working fine
just i cant boot into recovery now.
i flashed twrp again using fastboot
but still i m unable to boot to recovery.
Any help would be appreciated
Thanks in advanvce
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Yokohart said:
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Click to expand...
Click to collapse
Thanks for the reply
will try that
hope it works
yashthakur797 said:
Thanks for the reply
will try that
hope it works
Click to expand...
Click to collapse
You're welcome and good luck
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
yashthakur797 said:
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
Click to expand...
Click to collapse
Because you're still on stock firmware , maybe?
Yokohart said:
Because you're still on stock firmware , maybe?
Click to expand...
Click to collapse
i have installed the cm13 firmware
that might not be the reason
yashthakur797 said:
i have installed the cm13 firmware
that might not be the reason
Click to expand...
Click to collapse
which cm13 firmware by who?
actually if you have cm13 firmware the boot logo should change to cm13 logo.
cm13 firmware provided by thestrix
in my case i get the mi logo and then cm13 boot animation
the normal boot speed is fine
but when i boot to recovery, it takes a long time
Hi,
My friend gave me this phone to update the rom, but I'm facing a problem. Device was rooted, recovery is installed, but some really old one - it doesn't even say what kind of recovery it is. So I read that I need to update to TWRP 2.8.4.0 rev.2. Tried flashing it with TWRP apk, but after choosing it and hitting install, it reboots and goes into old recovery and I can't install new TWRP. Then I tried installing it with this guide: http://rootoreviews.com/root-Lenovo-P780-install-twrp-custom-recovery , but I'm getting error: partition 'recovery' not support flash.
Lastly I tried with SP Flash Tools, but I can't install drivers. After holding red button 2 seconds and plugging cable there is no device unknown to install drivers or any kind of device looking like this phone.
Can anyone help ?
Thanks
gunlok said:
Hi,
My friend gave me this phone to update the rom, but I'm facing a problem. Device was rooted, recovery is installed, but some really old one - it doesn't even say what kind of recovery it is. So I read that I need to update to TWRP 2.8.4.0 rev.2. Tried flashing it with TWRP apk, but after choosing it and hitting install, it reboots and goes into old recovery and I can't install new TWRP. Then I tried installing it with this guide: http://rootoreviews.com/root-Lenovo-P780-install-twrp-custom-recovery , but I'm getting error: partition 'recovery' not support flash.
Lastly I tried with SP Flash Tools, but I can't install drivers. After holding red button 2 seconds and plugging cable there is no device unknown to install drivers or any kind of device looking like this phone.
Can anyone help ?
Thanks
Click to expand...
Click to collapse
Hi. I have read your message and you have to do this:
First Tutorial.
I see that you have installed allready one custom recovery.
1. Download TWRP from here: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
2. After download putt the zip file to your root of your internal memory
3. Reboot to your current recovery and install twrp
4. After install power down your phone.
5. Start your phone again with all buttons pressed: Power + Volume up and Volume down.
6. Go to TWRP and do a full backup of your current firmware.
7. After full backup you can install any custom firmware you want.
8. I reccomend latest MIUI from AndreyZO, Mirror 9.
9. Good luck. If you have other questions write here.
Seccond Tutorial
1. Look in this post: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
2. Download TWRP_v2.8.4.0 rev2 and read twice that tutorial
3. Go to this post and download SP Flash Tool: https://drive.google.com/drive/folders/0B_B98oK4DpK1S1l2bXRkTGxhVFk
4. Go to this post and download latest stock KITKAT and drivers: http://forum.xda-developers.com/lenovo-p780/development/p780-row-s226-flash-flashtool-t2909202
5. When you install the drivers in windows 8,10 you must disable driver signing. Look on youtube.
6. Now you must flash new system.
7. Unpack stock Kitkat firmware.
8. Unpack TWRP.
9. Go to firmware folder and delete recovery.img and replace with TWRP
10. Flash the firmware.
11. After flash boot at least once. If by any chance your phone is Lenovo P780 speed edition, after this flash will not start. This means that you need the latest preloader. Download it from here: http://forum.xda-developers.com/lenovo-p780/help/lenovo-p780-chineese-speed-version-t2874161
12. After flash reboot in recovery by powering off the phone and start with all buttons pressed: Power + Volume up and Volume down.
13. Now you have last stock firmware with custom recovery installed. Go to TWRP and do a full backup of your current firmware.
14. After full backup you can install any custom firmware you want.
15. I reccomend latest MIUI from AndreyZO, Mirror 9.
16. Good luck. If you have other questions write here.
Tried to flash from this weird recovery, but I get error - look at pic.
I didnt flash this recovery, it must've been flashed by seller in my country. It looks like he way buying chinese versions and then flashing modified rom with polish language (very poorly translated).
Problem with sp flash tools is, I cant install usb driver. When Im in download mode I get the sound that usb device has been plugged in and after 1 second i get the unplugging sound. There is no unknown device in Device Manager, do I am not able to update the driver :/
gunlok said:
Tried to flash from this weird recovery, but I get error - look at pic.
I didnt flash this recovery, it must've been flashed by seller in my country. It looks like he way buying chinese versions and then flashing modified rom with polish language (very poorly translated).
Problem with sp flash tools is, I cant install usb driver. When Im in download mode I get the sound that usb device has been plugged in and after 1 second i get the unplugging sound. There is no unknown device in Device Manager, do I am not able to update the driver :/
Click to expand...
Click to collapse
That one is stock recovery. Proceed with the seccond tutorial.
One more question before I try to flash, I got CN verision, u answered to me in different thread:
stympy said:
Hi. Your layout is CN.
Look if you have custom recovery TWRP Installed.
If you have TWRP installed you can go to this post and install latest MIUI MINOVO.
Good luck.
Click to expand...
Click to collapse
So is that ROW Kit Kat ok for me ?
Yes it is ok as base firmware.
After you flash and install TWRP, you can install any custom firmware.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Ehh now in SP flash tool I get this error... I followed all steps :/
gunlok said:
Ehh now in SP flash tool I get this error... I followed all steps :/
Click to expand...
Click to collapse
Try version 5 and see what happens.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
gunlok said:
Ehh now in SP flash tool I get this error... I followed all steps :/
Click to expand...
Click to collapse
Did you have any success with SP Flash tool v5?
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Hi,
Sorry for delay, wasn't at home during weekend. Im flashing right now, but I had to use "Format all + download", cause only download showed error: "PMT changed for the ROM it must be download". Now I can flash the ROW version of custom rom or CN ?
Hmm I have still stock recovery not TWRP, although I replaced it with TWRP. File size matches perfectly...
Ok, worked but I flashed it with ROW version of recovery, making backup at the moment.
Got an error installing minovo_NOTE_6.12.1_ROW.zip, couldn't boot into recovery after so I decided to flash via SP Flash Tools one more time. After that booted into recovery and once more I have stock recovery xD I'm in serious WTF mode right now
Hmm I think I screwed something. After booting Kit Kat it says "Invalid imei" :/ I guess I will have to restore with MTK droid tools ? Can you guide me through that ?
gunlok said:
Hi,
Sorry for delay, wasn't at home during weekend. Im flashing right now, but I had to use "Format all + download", cause only download showed error: "PMT changed for the ROM it must be download". Now I can flash the ROW version of custom rom or CN ?
Hmm I have still stock recovery not TWRP, although I replaced it with TWRP. File size matches perfectly...
Ok, worked but I flashed it with ROW version of recovery, making backup at the moment.
Got an error installing minovo_NOTE_6.12.1_ROW.zip, couldn't boot into recovery after so I decided to flash via SP Flash Tools one more time. After that booted into recovery and once more I have stock recovery xD I'm in serious WTF mode right now
Hmm I think I screwed something. After booting Kit Kat it says "Invalid imei" :/ I guess I will have to restore with MTK droid tools ? Can you guide me through that ?
Click to expand...
Click to collapse
Hi. Look on this location:
http://forum.xda-developers.com/showthread.php?t=3174563
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Sorry for annoying you once again. When I try to flash anything in TWRP I get error "unable to mount /system". I read that it could mean that system partition might have incorrect file system. What is the standard one for p780?
It happens when I flash the stock KK with TWRP recovery, then I want to flash Superuser. I need superuser to use MTKdroidtools to restore IMEI.
My biggest problem is when I boot the Stock KK after flashing and power OFF, I can't boot to TWRP recovery. Instead it's booting stock recovery. Only way to to boot to TWRP or any custom recovery (tried CWM) is only after fresh flashing with SPflashtools, but I can't flash superuser. If I format /system I can install superuser (no error unable to mount /system), but I have no system to boot to use MTKdroidtools.
This phone is driving me crazy....
UPDATE:
Ok i managed to restore everything, thanks for help. Can't flash custorm rom still but im making different thread.
INSTALL TWRP AND ROOT LENOVO P1M
Check this first.
a) Take backup of your important data at safe place.
b) Device must adequately charged.
c) Install USB drivers (MTK USB ALL + MTK VCOM DRIVER) to your PC. (For Windows) (Extract the driver zip and read the ReadMe.txt to install Usb Drivers)
Install TWRP
Follow the steps below.
Note : Use only TWRP 3 if your device is New Version or else your device will face some problem.
1) Download Sp Flash Tool and TWRP3 then Extract the Flash Tool & TWRP. – Then open " flash_tool.exe ".
2) Select " MT6735M_Android_scatter.txt ". It will locate in TWRP 3 folder.
3) Click Options on the top left side of the Flash Tool then check Download and make sure both of them are checked.
4) Select the " Download Only " to flash recovery.
5) Now just click on checkbox recovery and browse to the extracted files and locate " recovery.img ".
6) Turn off your Lenovo Vibe P1m
7) Click the big Download button on top right and connect the phone with usb cable in switch off condition.
8) Now you will see the red stripe showing download percentage.
9) Your phone is successfully installed TWRP now.
Steps to enter Recovery mode in Lenovo VIBE P1m :
1) Press and hold the Volume Down Button + Power Button.
2) When you see the Boot Screen, Release the Buttons.
3) Select Recovery mode using Volume Down.
4) Press Volume Up to Enter Recovery mode.
Note : When you flash recovery, do not switch on the device directly or else the recovery will replace by stock recovery.
Now TWRP recovery is installed on your Lenovo Vibe P1m.
Root Lenovo Vibe P1M
After installing TWRP on Lenovo Vibe P1M, follow the given steps to root it.
1) Download SuperSU from here.
2) Place the downloaded SuperSu zip in your external SD card.
3) Boot into Recovery Mode.
4) Click the Install menu on TWRP.
5) Browse the SuperSu zip you've downloaded and install it.
6) After SuperSu zip is successfully installed, Reboot your device.
7) Your Device is Rooted now.
Warning: I am not responsible if anything goes wrong, bricked device.
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Sorry for the late reply... i hope you've fixed it now..
Vlk Is My Name said:
Sorry for the late reply... i hope you've fixed it now..
Click to expand...
Click to collapse
Yes bro...i try another version of twrp & its work for me
subhyendu said:
Yes bro...i try another version of twrp & its work for me
Click to expand...
Click to collapse
Twrp 3.1.0 is now available...
Vlk Is My Name said:
Twrp 3.1.0 is now available...
Click to expand...
Click to collapse
How to update bro..
subhyendu said:
How to update bro..
Click to expand...
Click to collapse
Download the update and install through the previous twrp or flashify or sp flash tool or adb fastbooot, etc
subhyendu said:
I try to flash twrp.img by using flashfy app in my lenovo vibe p1m....after unlocking my bootloder i flash the file...then i try to reboot in recovery.... But twrp is not working...also my phone stock recovery is gone...when i try to enter recovery mode its only reboot...even i cant factory reset my phone....please help me
Click to expand...
Click to collapse
Same problem here!! ?? (Not fixed yet)?
Rocker223 said:
Same problem here!! ?? (Not fixed yet)?
Click to expand...
Click to collapse
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
subhyendu said:
If ur phone is not rooted than first root it via kingroot...than try to flash another version of twrp via flashify..
Click to expand...
Click to collapse
By the way, I had already rooted it!! And now somehow I got it fixed!
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
SHUBHAM 13 said:
Bros plz help
I have downloaded above everything
But before I proceed to flash twrp3 do I need to unlock bootloader, if yes can I use sp flash tool for unlocking .Plz help
Click to expand...
Click to collapse
sorry for the late reply.. no need to unlock bootloader.. you can just flash TWRP via SP Flash tool.
I can't find the usb driver for windows 10.Can any one give the link?
how to update my twrp
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
hendra.dunk said:
Please help me how to update my twrp
I am on twrp 2.8 now
I need to update it to twrp 3.1.1
Ive tried flash twrp.img trough rashr but end up bootloop
Isnthere any flashable update i can use
Since i need to update it so i can flash any nougat rom
Im on miui 9 rom now
Click to expand...
Click to collapse
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Vickyvignesh said:
I can't find the usb driver for windows 10.Can any one give the link?
Click to expand...
Click to collapse
yeahhh... me too... :crying: that's why I dual boot with win 7
Vlk Is My Name said:
go to twrp recovery and select install option.. then select install image and flash your new twrp img file
Click to expand...
Click to collapse
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
hendra.dunk said:
Thsnk you. Its done. now i have twrp 3.1 .1 one more question why i get error 7 when i tried to flash a nougat rom.? Any solution sir?
Click to expand...
Click to collapse
that may be due to the incompatible of updater script and twrp
Success!
Successfully booting into TWRP using this method. Thanks. My firmware is S040 (year 2017).
Dude, can you reupload the TWRP3 file from google drive? It got deleted. THANKS!