CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
Device Tree : https://github.com/dhinesh77/android_device_samsung_corsica
Kernel : https://github.com/dhinesh77/android_kernel_samsung_corsica
[Thanks to Pawitp ]
[Thanks to Alonso1398 ]
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Single SIM
Sensors (Accelerometer, Compass,)
Camera (photo + camcorder)
Video playback
Audio
GPS
Everything else not listed under "known issues"
Known Issues
None
=============================================================================
Downloads
Stable version : http://www.4shared.com/folder/jfWbdecP/Corsica.html
CWM : http://www.4shared.com/file/lS99vrFmba/recoverytar.html
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
Beta 2 : http://www.mediafire.com/download/jlxrai4r9aq5g66/cm-10.1-20140606-UNOFFICIAL-corsica.zip
Ril_fix-2 http://d-h.st/Fvb
Changelog : fixed Ril
Beta 1 : http://www.mediafire.com/download/n1n1b6bjtyz40bl/cm-10.1-20140602-UNOFFICIAL-corsica.zip
note: the above cwm alone can capable of flashing the above cm...
=============================================================================
Installation
1. Go to CWM recovery do wipe data/factory reset.
2. Install ROM
3. Install GAPPS
4. Reboot,
============================================================================
Changelog
05/11/2014 - Release of stable version.
Credits:
@pawitp
@Unjustified Dev
@k2wl
@Alonso1398
XDA:DevDB Information
[CM10.1][For Samsung Galaxy Pocket Neo & Duos][S5310/S5312], ROM for the Samsung Galaxy Grand Duos i9082
Contributors
dhinesh77, k2wl, Unjustified Dev , psych.half
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Latest CWM recovery
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2014-11-05
Current Beta Version: 2
Beta Release Date: 2014-05-27
Created 2014-05-27
Last Updated 2014-11-05
Reserved
Moderators please move this thread sorry for posting in wrong area
dhinesh77 said:
Moderators please move this thread sorry for posting in wrong area
Click to expand...
Click to collapse
have u reported tge post ...only then theyl move it
Moved to Misc Dev
dhinesh77 said:
am trying to build cm10.1 for samsung glaxy pocket neo duos... I managed to go upto home screen , but i can see only black screen with force close messages.... i cant go there after....
1. I read your thread from first you mentioned that you have fixed egl, I tried to bing up hardware rendering but i cant do so ,
so far using software reendering
there eror comes "EGL_BAD_PARAMETER, EGL_BAD_DISPLAY " like that i dont know how to fix it...
error log
2. how to fix the force close eror
log when force close appeared
thanks in advance
Edit:
forgot to provide device tree link
https://github.com/dhinesh77/android...amsung_corsica
Click to expand...
Click to collapse
Sorry, didn't saw this post, cause i am not working on that rom. so i ignore posts there.
And looks like you got EGL working.
Upoad your boot.img, build.prop and framework.res.apk somewhere.. i will see if i can fix somethings..
And where is the download link and screenshots ??
psych.half said:
Sorry, didn't saw this post, cause i am not working on that rom. so i ignore posts there.
And looks like you got EGL working.
Upoad your boot.img, build.prop and framework.res.apk somewhere.. i will see if i can fix somethings..
And where is the download link and screenshots ??
Click to expand...
Click to collapse
no prob bro, uploading boot.img , build.prop , framewrok-res.apk soon...
Still internal memory not mounting and also no netwrok or baseband...
i planed to upload after fixing internal meory, thats why didnt uploaded till now....
because of internal meory screenshots are not saving, hence i cant able to post screenshots too
dhinesh77 said:
no prob bro, uploading boot.img , build.prop , framewrok-res.apk soon...
Still internal memory not mounting and also no netwrok or baseband...
i planed to upload after fixing internal meory, thats why didnt uploaded till now....
because of internal meory screenshots are not saving, hence i cant able to post screenshots too
Click to expand...
Click to collapse
internal memory can be easily fixed.... just need to add some lines.. does this phone have external sd too??
it's hard to fix network and baseband without phone..
you can still take screenshots by adb.. :| but leave it.. i understand i have faced the same problem too..
psych.half said:
internal memory can be easily fixed.... just need to add some lines.. does this phone have external sd too??
it's hard to fix network and baseband without phone..
you can still take screenshots by adb.. :| but leave it.. i understand i have faced the same problem too..
Click to expand...
Click to collapse
in file manager it shows internal storage and mount point as stoarge/emulated/ but when i click it shows no file or folder avail.. this error is displayed in screenshts which i have uploaded...
wifi hotspot working but i cant turn on wifi nor buletooth ...
between here is the file you asked
http://www.mediafire.com/?kgf47p2rp337h
dhinesh77 said:
no prob bro, uploading boot.img , build.prop , framewrok-res.apk soon...
Still internal memory not mounting and also no netwrok or baseband...
i planed to upload after fixing internal meory, thats why didnt uploaded till now....
because of internal meory screenshots are not saving, hence i cant able to post screenshots too
Click to expand...
Click to collapse
use DDMS to take screenshot
dhinesh77 said:
in file manager it shows internal storage and mount point as stoarge/emulated/ but when i click it shows no file or folder avail.. this error is displayed in screenshts which i have uploaded...
wifi hotspot working but i cant turn on wifi nor buletooth ...
between here is the file you asked
http://www.mediafire.com/?kgf47p2rp337h
Click to expand...
Click to collapse
okay.. this should probably fix the internal memory... :fingers-crossed: https://www.dropbox.com/s/hb0j2254vp1vuh7/new_boot.img
services looks okay.. check your /system/etc/permissions.. is there.. android.hardware.bluetooth.xml and android.hardware.wifi.xml ??
psych.half said:
okay.. this should probably fix the internal memory... :fingers-crossed: https://www.dropbox.com/s/hb0j2254vp1vuh7/new_boot.img
services looks okay.. check your /system/etc/permissions.. is there.. android.hardware.bluetooth.xml and android.hardware.wifi.xml ??
Click to expand...
Click to collapse
new boot.img doesnt enables internal sd, and permissions xmls are there...
still not working :crying:
cleverior.ipul said:
use DDMS to take screenshot
Click to expand...
Click to collapse
yeah done with asm
dhinesh77 said:
new boot.img doesnt enables internal sd, and permissions xmls are there...
still not working :crying:
Click to expand...
Click to collapse
what;s the output of these commands..
Code:
adb shell ls -l /storage/
and
Code:
adb shell ls -l /storage/emulated
sorry.. can't help much.. but upload a logcat..
psych.half said:
what;s the output of these commands..
Code:
adb shell ls -l /storage/
and
Code:
adb shell ls -l /storage/emulated
sorry.. can't help much.. but upload a logcat..
Click to expand...
Click to collapse
Code:
dr-xr-xr-x root root 2014-05-28 08:34 emulated
lrwxrwxrwx root root 2014-05-28 08:34 sdcard0 -> /storage/emulated/legacy
d---rwxr-x system sdcard_rw 1970-01-01 00:00 sdcard1
[email protected]:~$ adb shell ls -l /storage/emulated
lrwxrwxrwx root root 2014-05-28 08:34 legacy -> /mnt/shell/emulated/0
logcat
http://justpaste.it/fmzb
dhinesh77 said:
Code:
dr-xr-xr-x root root 2014-05-28 08:34 emulated
lrwxrwxrwx root root 2014-05-28 08:34 sdcard0 -> /storage/emulated/legacy
d---rwxr-x system sdcard_rw 1970-01-01 00:00 sdcard1
[email protected]:~$ adb shell ls -l /storage/emulated
lrwxrwxrwx root root 2014-05-28 08:34 legacy -> /mnt/shell/emulated/0
logcat
http://justpaste.it/fmzb
Click to expand...
Click to collapse
the links look okay.. maybe problem in storage_list.xml :|
decompile framework-res.apk and edit /res/xml/storage_list.xml to...
Code:
<?xml version="1.0" encoding="utf-8"?>
<StorageList xmlns:android="http://schemas.android.com/apk/res/android">
<storage
android:mountPoint="/storage/emulated/legacy"
android:storageDescription="@string/storage_internal"
android:primary="true"
android:emulated="true"
android:mtpReserve="100" />
<storage
android:mountPoint="/storage/sdcard1"
android:storageDescription="@string/storage_sd_card"
android:primary="false"
android:removable="true"
android:allowMassStorage="true" />
</StorageList>
---------- Post added at 10:42 AM ---------- Previous post was at 10:25 AM ----------
So you didn't notice these... :|
D/MountService( 1657): got storage path: null description: Internal storage primary: true removable: false emulated: true mtpReserve: 100 allowMassStorage: false maxFileSize: 0
D/TelephonyManager( 1274): No /proc/cmdline exception=java.io.FileNotFoundException: /proc/cmdline: open failed: EACCES (Permission denied)
I/wpa_supplicant( 1906): unknown option -- I
I/wpa_supplicant( 1906): wpa_supplicant v2.0-devel-4.2.2
I/wpa_supplicant( 1906): Copyright (c) 2003-2012, Jouni Malinen <[email protected]> and contributors
I/wpa_supplicant( 1906): This software may be distributed under the terms of the BSD license.
I/wpa_supplicant( 1906): See README for more details.
I/wpa_supplicant( 1906): This product includes software developed by the OpenSSL Project
I/wpa_supplicant( 1906): for use in the OpenSSL Toolkit (http://www.openssl.org/)
I/wpa_supplicant( 1906): usage:
I/wpa_supplicant( 1906): wpa_supplicant [-BddhKLqqstuvW] [-P<pid file>] [-g<global ctrl>]
.....
E/WifiStateMachine( 1657): Failed to start supplicant!
Click to expand...
Click to collapse
mounting can be fixed by changing the storage_list.xml
wifi can be fixed by by correcting that option...
psych.half said:
the links look okay.. maybe problem in storage_list.xml :|
decompile framework-res.apk and edit /res/xml/storage_list.xml to...
Code:
<?xml version="1.0" encoding="utf-8"?>
<StorageList xmlns:android="http://schemas.android.com/apk/res/android">
<storage
android:mountPoint="/storage/emulated/legacy"
android:storageDescription="@string/storage_internal"
android:primary="true"
android:emulated="true"
android:mtpReserve="100" />
<storage
android:mountPoint="/storage/sdcard1"
android:storageDescription="@string/storage_sd_card"
android:primary="false"
android:removable="true"
android:allowMassStorage="true" />
</StorageList>
---------- Post added at 10:42 AM ---------- Previous post was at 10:25 AM ----------
So you didn't notice these... :|
mounting can be fixed by changing the storage_list.xml
wifi can be fixed by by correcting that option...
Click to expand...
Click to collapse
Still internal storage couldnt be mountd, logcat says read only file system,
Between Wifi still no improvements
bluetooth trning on but unable to connect to any devices...
Still no improvements in ril, but dont know how time is synchronising automatically;
VECTUS said:
Moved to Misc Dev
Click to expand...
Click to collapse
thanks , between in main post it saying a rom for grand duos, i cant able to rename that, will you do that for me sir ?
getting could not find socket error for ril... how o fix it , anybody help lease..
Code:
06-05 13:17:40.813 I/RILJ ( 1924): Couldn't find 'rild' socket; retrying after timeout
06-05 13:17:44.807 I/RILJ ( 1924): Couldn't find 'rild' socket; retrying after timeout
06-05 13:17:48.811 I/RILJ ( 1924): Couldn't find 'rild' socket; retrying after timeout
06-05 13:17:52.815 I/RILJ ( 1924): Couldn't find 'rild' socket; retrying after timeout
06-05 13:17:56.809 I/RILJ ( 1924): Couldn't find 'rild' socket; retrying after timeout
06-05 13:18:00.813 E/RILJ ( 1924): Couldn't find 'rild' socket after 8 times, continuing to retry silently
and full log is below
http://pastebin.com/VBrxKhLa
ril issue fixed
@k2wl @psych.half @Unjustified Dev thanks for your support bros
Related
Miui v4 ics
V1 Pre Alpha :
Bad:
Not rooted (V2)
Big size (it's a MIUI) its an ext4 take more place but faster then ext2
Good :
Faster
Mount internal and external in same time on usb storage
http://www.multiupload.nl/YOJJ6EGDTB
Need this Fota :
http://forum.xda-developers.com/attachment.php?attachmentid=1340004&d=1348112866
Can use this fota for Jb too
1634 Score Quadrant Bench
Update kernel lzo compression faster boot :
http://www.2shared.com/file/elX9vC8e/zImage.html
If you have some prob with lock tell me
Ps : MIUI better on Nand more place more faster
Do i just replace previous ?
basbulletje said:
Do i just replace previous ?
Click to expand...
Click to collapse
yes
so it's a beta... i'm just trying it!
Devriel said:
so it's a beta... i'm just trying it!
Click to expand...
Click to collapse
Just kernel for ICS now
I will try tomorrow with full version of this cfw
Very good job! I congratulate you!
This is one of the most complete truth Roms?.
Will you do a video to see the optimization?
Update :New kernel
Also for now i can upload Slim ICS with optimisation...
MIUI coming later not finished...
Tigrouzen said:
Incoming :
MIUI V4 ICS
Kernel :
Super optimised
Swap
Sd mount external USB storage
Boot on 39sec
Super Fast
....
For now you can test kernel and install SwapperApp test it with any ICS rom for wave of course
Or you can test it like this :
Before make a backup your sd :
You need have on your sd second parition swap
on android terminal or adb shell
fdisk /dev/block/mmcblk1
p
d
(delete all partition)
n
p (primary)
1 (first)
first sector : (enter)
last sector : +3400M (if your card are 4go)
t
b (fat32)
n
p
2
enter
enter
t
2
82
w
after :
mkswap -c /dev/block/mmcblk1p2
and:
mkfs.vfat -c /dev/block/mmcblk1p1
then :
vi /etc/fstab
write this :
/dev/block/mmcblk1p2 swap swap defaults 0 0
for save like this :
:z or :w (cause im on azerty keyboard)
then quit:
:q
Or other way in windows :
notepad
copy past line
and save file name fstab
with no extension
(you need to choice in option folder to see extension on file in windows for no mistake)
and adb push fstab /etc/
or copy it on sd and on terminal android if you dont have adb shell do this :
cp /emmc/fstab /etc/
then in terminal or shell :
chmod 0755 /etc/fstab
finaly reboot and on terminal android :
swapon /dev/block/mmcblk1p2
if you want all time swapon start you need to add on script in /etc/init.d/ folder
SlimFast with optimise and debug :
170Mo Free
TvOut
Rooted...
Upload
Click to expand...
Click to collapse
can you please add liveOC and voodo.colour support to your swap enabled kernal.
---------- Post added at 09:41 AM ---------- Previous post was at 09:39 AM ----------
liveOC + swap enabled would be really.nice and smooth.
m90ultimate said:
can you please add liveOC and voodo.colour support to your swap enabled kernal.
---------- Post added at 09:41 AM ---------- Previous post was at 09:39 AM ----------
liveOC + swap enabled would be really.nice and smooth.
Click to expand...
Click to collapse
LiveOC Rebellos can do it, need to be change on kernel
Tigrouzen said:
Incoming :
MIUI V4 ICS
Kernel :
Super optimised
Swap
Sd mount external USB storage
Boot on 39sec
Super Fast
....
For now you can test kernel and install SwapperApp test it with any ICS rom for wave of course
Or you can test it like this :
Before make a backup your sd :
You need have on your sd second parition swap
on android terminal or adb shell
fdisk /dev/block/mmcblk1
p
d
(delete all partition)
n
p (primary)
1 (first)
first sector : (enter)
last sector : +3400M (if your card are 4go)
t
b (fat32)
n
p
2
enter
enter
t
2
82
w
after :
mkswap -c /dev/block/mmcblk1p2
and:
mkfs.vfat -c /dev/block/mmcblk1p1
then :
vi /etc/fstab
write this :
/dev/block/mmcblk1p2 swap swap defaults 0 0
for save like this :
:z or :w (cause im on azerty keyboard)
then quit:
:q
Or other way in windows :
notepad
copy past line
and save file name fstab
with no extension
(you need to choice in option folder to see extension on file in windows for no mistake)
and adb push fstab /etc/
or copy it on sd and on terminal android if you dont have adb shell do this :
cp /emmc/fstab /etc/
then in terminal or shell :
chmod 0755 /etc/fstab
finaly reboot and on terminal android :
swapon /dev/block/mmcblk1p2
if you want all time swapon start you need to add on script in /etc/init.d/ folder
SlimFast with optimise and debug :
170Mo Free
TvOut
Rooted...
Upload
Click to expand...
Click to collapse
Dude, i'm not getting it will you put on a simple TUT please. or anyone
Thanks in advance
Update Slimfast for test use...
Tigrouzen said:
Update Slimfast for test use...
Click to expand...
Click to collapse
testing right now ..
Edit ; Just copied rom files to internal memory and booting to android after badadroid screen phone is turn off ? why ?
hero355 said:
testing right now ..
Edit ; Just copied rom files to internal memory and booting to android after badadroid screen phone is turn off ? why ?
Click to expand...
Click to collapse
Its difficult to find this bug o Wave II no lcd and ddms show me all time screen... I need Wave I...
Tigrouzen said:
Its difficult to find this bug o Wave II no lcd and ddms show me all time screen... I need Wave I...
Click to expand...
Click to collapse
after badadroid screen phone is turning off
hero355 said:
after badadroid screen phone is turning off
Click to expand...
Click to collapse
Did you see lockscreen ?
Tigrouzen said:
Did you see lockscreen ?
Click to expand...
Click to collapse
Nothing after first badadroid logo phone is turning off
hero355 said:
Nothing after first badadroid logo phone is turning off
Click to expand...
Click to collapse
Ok
Hello there!
Yep, he's right. I can't see anything after first "badadroid" logo.
Update
Its slim rom optimised ICS im working on MIUI more fatser JB but making mistake i lost all my work...
Sd working browser work....
coming later for MIUI
All dev related posts for fixing cm9 will come here.
All ideas are welcome but dont post for eta and stuff like that..
Currently fixing: Bluetooth
ToDo:
Camera
Internal memory
Graphic flickering
Audio(partially working)
Anything else?
Fixed:Wifi
My device tree: https://github.com/hell-lock-xda/android_device_htc_protou
If you manage to fix anything then send me a pull request.
prototype-U said:
All dev related posts for fixing cm9 will come here.
All ideas are welcome but dont post for eta and stuff like that..
Currently fixing: WiFi
ToDo: Bluetooth
Camera
Internal memory
Graphic flickering
Audio(partially working)
Anything else?
My device tree: https://github.com/hell-lock-xda/android_device_htc_protou
If you manage to fix anything then send me a pull request.
Click to expand...
Click to collapse
Fixed:
Camera atis 112 fixed it (if permissions were granted )
Internal Memory ( same as above )
I'll try ti fix graphical glitches
And wait have you tried using stuff from lliors device trees/ github?
The Android Manual said:
Fixed:
Camera atis 112 fixed it (if permissions were granted )
Internal Memory ( same as above )
I'll try ti fix graphical glitches
And wait have you tried using stuff from lliors device trees/ github?
Click to expand...
Click to collapse
Where is the fix??
BTW @all the above device tree is not working properly.. pls dont compile it.. I will soon make a working device tree
prototype-U said:
Where is the fix??
BTW @all the above device tree is not working properly.. pls dont compile it.. I will soon make a working device tree
Click to expand...
Click to collapse
In atis112's guthub his cm9 build has a functioning camera and internal memory
The Android Manual said:
In atis112's guthub his cm9 build has a functioning camera and internal memory
Click to expand...
Click to collapse
I have his tree forked and camera is nt working.. dunno abt internal
Good news and bad news for ya all!
Bad news:Wifi is still not working properly
Good news:WiFi drivers are loading properly! But its showing probs with supplicant. I was able to replicate such problems on stock rom too so we are pretty close to fixing it!
Code:
23:26:55.120 Error WifiHW 294 Supplicant not running, cannot connect
23:26:44.093 Info logwrapper 4398 /system/bin/wpa_supplicant terminated by exit(255)
23:26:44.093 Error wpa_supplicant 4401 wlan0: Unsupported driver 'nl80211'
23:26:39.065 Error WifiStateMachine 294 Failed to setup control channel, restart supplicant
23:26:24.107 Error wpa_supplicant 3977 wlan0: Unsupported driver 'nl80211'
23:26:24.107 Info logwrapper 3974 /system/bin/wpa_supplicant terminated by exit(255)
Adding the commit to github and will work on that driver..
prototype-U said:
Good news and bad news for ya all!
Bad news:Wifi is still not working properly
Good news:WiFi drivers are loading properly! But its showing probs with supplicant. I was able to replicate such problems on stock rom too so we are pretty close to fixing it!
Code:
23:26:55.120 Error WifiHW 294 Supplicant not running, cannot connect
23:26:44.093 Info logwrapper 4398 /system/bin/wpa_supplicant terminated by exit(255)
23:26:44.093 Error wpa_supplicant 4401 wlan0: Unsupported driver 'nl80211'
23:26:39.065 Error WifiStateMachine 294 Failed to setup control channel, restart supplicant
23:26:24.107 Error wpa_supplicant 3977 wlan0: Unsupported driver 'nl80211'
23:26:24.107 Info logwrapper 3974 /system/bin/wpa_supplicant terminated by exit(255)
Adding the commit to github and will work on that driver..
Click to expand...
Click to collapse
can you upload the built you made??
mhb92 said:
can you upload the built you made??
Click to expand...
Click to collapse
I hate posting here, but if you want the build, check out the sources.
Sent from my awesome, stock, Nexus7!
i will be able to check source from my main pc next week..thats why i want the built rom...i wanna check something about supplicant file
mhb92 said:
i will be able to check source from my main pc next week..thats why i want the built rom...i wanna check something about supplicant file
Click to expand...
Click to collapse
I will upload it in few hrs from now..
new build is compiling
Ok..! Waiting for link
Sent from my HTC Desire X using xda app-developers app
So guys here is the latest build. Sorry I cant put it on d-h.st cuz my connection is slow and I will prefer github until we fix all the bugs.
https://github.com/hell-lock-xda/cm9-packages
Just click on zip.
And the kernel is here..
http://d-h.st/zSS
prototype-U said:
So guys here is the latest build. Sorry I cant put it on d-h.st cuz my connection is slow and I will prefer github until we fix all the bugs.
https://github.com/hell-lock-xda/cm9-packages
Just click on zip.
And the kernel is here..
http://d-h.st/zSS
Click to expand...
Click to collapse
https://raw.github.com/hell-lock-xda/cm9-packages/master/cm-9-20130505-UNOFFICIAL-protou.zip
Error: blob is too big
BTW:
init.rc, that loads the wpa_supplicant service, also specifies nl80211.
WiFi almost fixed. It gets turned on but still few errors left to fix(scanning and stuff not working till now).
Code:
18:47:17.788 Info wpa_supplicant 2988 rfkill: Cannot open RFKILL control device
18:47:17.898 Info wpa_supplicant 2988 WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
18:47:18.007 Error WifiConfigStore 298 Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
18:47:18.007 Error wpa_supplicant 2988 wpa_driver_nl80211_driver_cmd: failed to issue private commands
18:47:18.007 Error WifiStateMachine 298 Failed to set country code in
18:47:18.007 Error wpa_supplicant 2988 wpa_driver_nl80211_driver_cmd: failed to issue private commands
18:47:18.007 Info wpa_supplicant 2988 wlan0: CTRL-EVENT-DRIVER-STATE HANGED
18:47:18.007 Error WifiStateMachine 298 Failed to set frequency band 0
18:47:18.007 Debug CommandListener 137 Clearing all IP addresses on wlan0
18:47:18.007 Info wpa_supplicant 2988 wlan0: CTRL-EVENT-TERMINATING
18:47:18.224 Debug SoftapController 137 Softap fwReload - Ok
18:47:18.224 Debug CommandListener 137 Setting iface cfg
18:47:18.224 Debug CommandListener 137 Trying to bring down wlan0
When I press on "ON", it turns on and then off... this keeps on happening.. so we did something productive today
Wifi fixed!!!!!!!!!!yeyeyeyeyey!!
YEAAAHHHH!
prototype-U said:
Wifi fixed!!!!!!!!!!yeyeyeyeyey!!
Click to expand...
Click to collapse
I love you lol Lets apply it on PA! What do you say?
The Android Manual said:
I love you lol Lets apply it on PA! What do you say?
Click to expand...
Click to collapse
tomorrow :highfive:
prototype-U said:
tomorrow :highfive:
Click to expand...
Click to collapse
Copy That :highfive:
so is wifi fully working now???
mhb92 said:
so is wifi fully working now???
Click to expand...
Click to collapse
Yes
I finally made it:laugh: firefox can work on xperia neo v
There are quite jobs needs to done, but basic things works well
didn't test too much but for now
calls works
camera doesn't work
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
####final update
Here is alpha preview with firefox os v1.3pre
files for download:
boot.img
full_haida-ota-eng.root.zip
system.img.xz
firexperia-wifi-modules.SIGNED.zip
it has two way installer
fastboot or cwm choose as you like
installation
fastboot flash boot boot.img
fastboot flash system system.img or install from cwm with full_haida-ota-eng.root.zip
install wifi modules via cwm
do factory reset/wipe data
reboot and enjoy
####update5
I was upgrade my system to i7 haswell maybe I can build roms for whole 2011 xperia series at least I will try I am not promise anything but stay tuned
####update 4
Here is alpha preview with firefox os v1.1hd_pre
files for download:
boot.img
full_haida-ota-eng.root.zip
system.img.7z
firexperia-wifi-modules.SIGNED.zip
it has two way installer
fastboot or cwm choose as you like
installation
fastboot flash boot boot.img
fastboot flash system system.img or install from cwm with full_haida-ota-eng.root.zip
install wifi modules via cwm
do factory reset/wipe data
reboot and enjoy
####update 3
switch to v1.1.0hd branch
rebase with fxp-229-cm9 branch
HDPi build works and screen resolution is normal now
need a lot of time to provide a stable version but maybe a preview version
####update 2
no release for now
Sources of builds
and credits goes to
neuralassembly
sola
FXP
Cyanogenmod
AOSP
Mozilla.org
GNU/Linux
thanks to them
oh yeah ... well done, take help from other developers
Looks nice there, bud.
Edit: Darn it. Too bad I can't speak Japanese and those guide just canned me to Tokyo.
Greetings, from HTC One via Tap-A-Talk IV Beta
Good work bro ,
keep going for this project :good:
Best regards from Team Blur
What's this thread doing on general section? Should be in dev section. Great job bro. Hope some devs jump in this project.
Sent from my MT11i
What kernel you used?
n1kolaa said:
What kernel you used?
Click to expand...
Click to collapse
Cm9 kernel
Sent from my haida
can you help me i get some eror when i almost fully compile source for anzu
he tells some file that you want to fork dont exist
n1kolaa said:
can you help me i get some eror when i almost fully compile source for anzu
he tells some file that you want to fork dont exist
Click to expand...
Click to collapse
Show me to log of error
Or check my sources
edit : probably the problem with this
add on anzu.xml
origin code
Code:
<project path="prebuilt" name="platform/prebuilt" revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
proper code
Code:
<project path="prebuilt" name="platform/prebuilt"[COLOR="Red"] remote="aosp" [/COLOR]revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
Sent from my haida
yacloo said:
Show me to log of error
Or check my sources
edit : probably the problem with this
add on anzu.xml
origin code
Code:
<project path="prebuilt" name="platform/prebuilt" revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
proper code
Code:
<project path="prebuilt" name="platform/prebuilt"[COLOR="Red"] remote="aosp" [/COLOR]revision="0e104261b6d33f87e9f86ff4249bcc0306ab278b"/>
Sent from my haida
Click to expand...
Click to collapse
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
I run the patch like this it was okay
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch [COLOR="Red"]-p1[/COLOR] < b2g-webapp-zip.patch
yacloo said:
I run the patch like this it was okay
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch [COLOR="Red"]-p1[/COLOR] < b2g-webapp-zip.patch
Click to expand...
Click to collapse
Code:
[email protected]:~/b2g_work/B2G/gaia/build$ wget --no-check-certificate https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
--2013-07-09 11:05:10-- https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 50.19.230.97
Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|50.19.230.97|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 780 [text/x-diff]
Saving to: `b2g-webapp-zip.patch.1'
100%[======================================>] 780 --.-K/s in 0s
2013-07-09 11:05:11 (107 MB/s) - `b2g-webapp-zip.patch.1' saved [780/780]
[email protected]:~/b2g_work/B2G/gaia/build$ patch -p1 < b2g-webapp-zip.patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|--- webapp-zip.js.orig 2013-06-23 20:26:30.135978096 +0900
|+++ webapp-zip.js 2013-06-23 20:43:02.032010587 +0900
--------------------------
File to patch: webapp-zip.js
patching file webapp-zip.js
Hunk #1 FAILED at 335.
1 out of 1 hunk FAILED -- saving rejects to file webapp-zip.js.rej
[email protected]:~/b2g_work/B2G/gaia/build$ ^C
[email protected]:~/b2g_work/B2G/gaia/build$
look still geting error can you shere webapp-zip.js from your pc ?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
I was update my sources, patch will not work on my sources
but anyway you can build your b2g without patch or you need to patch manually
mozilla was create new branch for hdpi devices called "v1.1.0hd"
I will build with v1.1.0hd branch but now I am busy maybe next week
I am trying to port B2G to smultron and i have a question :
In kernel the only modification is to add init.b2g.rc file and edit init.rc right?
init.b2g.rc :
Code:
service fakeperm /system/bin/fakeperm
class main
user root
service b2g /system/bin/b2g.sh
class main
onrestart restart media
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
on boot
exec /system/bin/rm -r /data/local/tmp
# set RLIMIT_NOFILE to increase soft limit from 1024(default) to 2048.
# Hard limit keeps default value(4096).
setrlimit 7 2048 4096
edit init.rc with this :
Code:
service fakeperm /system/bin/fakeperm
class main
user root
service rilproxy /system/bin/rilproxy
class main
socket rilproxy stream 660 root system
user root
group radio
service servicemanager-g /system/bin/servicemanager
class core
user system
group system
critical
service b2g /system/bin/b2g.sh
class main
onrestart restart media
or i need to edit more?
n1kolaa said:
no more errorrs now i will build it
Code:
$ cd $B2G_WORK/B2G/gaia/build
$ wget https://dl.dropboxusercontent.com/u/69652790/patch/b2g-webapp-zip.patch
$ patch < b2g-webapp-zip.patch
when i run line to pach it it give me erorr
can you shere me that file from your pc?
Click to expand...
Click to collapse
Today I checked the repository of gaia, and I found that the problem on webapp-zip.js has already been fixed 5 days ago.
So, if you downloaded the latest source codes, you do not have to apply the above patch any more.
I omitted the above commands from my blog.
Moreover, as for the manifest file, the download errors often take place depending on the network state.
When I downloaded the latest codes today without modifying manifest file,
I executed "./config.sh anzu" several times to obtain successful download.
Nice OS, I like it
neuralassembly said:
Today I checked the repository of gaia, and I found that the problem on webapp-zip.js has already been fixed 5 days ago.
So, if you downloaded the latest source codes, you do not have to apply the above patch any more.
I omitted the above commands from my blog.
Moreover, as for the manifest file, the download errors often take place depending on the network state.
When I downloaded the latest codes today without modifying manifest file,
I executed "./config.sh anzu" several times to obtain successful download.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=43408927#post43408927 i succes with building it but problem is resoution
and lot of things not sized well
n1kolaa said:
http://forum.xda-developers.com/showthread.php?p=43408927#post43408927 i succes with building it but problem is resoution
and lot of things not sized well
Click to expand...
Click to collapse
I have not tried your rom yet, but have you set the following environment variables before building?
The first one is for firefox icons, and second one is for high resolution device.
export MOZILLA_OFFICIAL=1
export GAIA_DEV_PIXELS_PER_PX=2
neuralassembly said:
I have not tried your rom yet, but have you set the following environment variables before building?
The first one is for firefox icons, and second one is for high resolution device.
export MOZILLA_OFFICIAL=1
export GAIA_DEV_PIXELS_PER_PX=2
Click to expand...
Click to collapse
thanks,also camera is fixed to photo only
im thinking to make 3.0.x kernel for b2g also i add you on my grup for b2g with i made
@yacloo i can add you too if you want to be part of it
n1kolaa said:
thanks,also camera is fixed to photo only
im thinking to make 3.0.x kernel for b2g also i add you on my grup for b2g with i made
@yacloo i can add you too if you want to be part of it
Click to expand...
Click to collapse
I cannot post to developer section because I am a new one, so I post here.
Please do not use the picture in my blog in your thread.
As for the update, I think you should not apply OTA system update
because my patch to gaia and gecko will be erased.
As a result, battery always shows 100%, the LED of home button is always ON,
and the effect of "GAIA_DEV_PIXELS_PER_PX=2" will also be erased.
I've found my RD-PQ on the shelf and decided to upgrade it to 2.3
That was a pretty easy procedure, although with 2.3 it's totally empty.
The most discouraging thing is that WiFi fails to connect.
There are several mentions of that problem at https://developer.tizen.org/ru/forums/general-support/tizen-2.3-rd-pq-device-available but no solutions or at least clues there.
Are there any options to debug it?
The only thing I could imagine was to connect to device console in sdb and check wpa_supplicant that was working somehow.
With 2.2.1 WiFi works fine.
What else can be done around it?
Ya need driver isntalled I think. Drivers is non free licensed and ya need to ask for it somewhere in dear Samsung company.
Tolko schas uvidel... Napishi na maemo.su, sprosi u Kirilla, k primeru, bolshe tolku budet. Zdes ne populyaren Tizen.
I have my RD-PQ only since 1 month... so I am newbie...
Since yesterday I saw first time 2.3.1 and WiFi complete not work... not able to find any thing... Scan not finish...
Installed files...
Code:
tizen-2.3.1-mobile_20150921.1_mobile_boot.tar.gz
[B]tizen-2.3.1-mobile_20150921.1_mobile_target.tar.gz[/B]
Then I have only flashed filesystem:
Code:
[B]tizen-2.3-mobile_20150812.1_mobile_target.tar.gz[/B]
So I mixed 2.3.1 Kernel with Filesystem from 2.3... and my WiFi now detect devices + I am able to connect to hidden network.
I need something to install to check if connection is not fake... but for now this is more as 2.3.1
I will later compare...
If usr/apps is bigger difference... between 2.3 and 2.3.1...
Later more...
Best Regards
---------- Post added at 05:28 PM ---------- Previous post was at 04:37 PM ----------
Code:
2.3.1 WiFi not work
sh-4.1# cd usr
sh-4.1# ls
apps etc lib local sbin src tmp
bin games libexec opt share ssl ug
sh-4.1# cd apps
sh-4.1# ls
cert-svc-ui org.tizen.poweroff-syspopup
org.tizen.app-selector org.tizen.quickpanel
org.tizen.bluetooth-share-ui org.tizen.setting
org.tizen.bt-syspopup org.tizen.setting-location
org.tizen.calendar-notification org.tizen.system-signal-sender
org.tizen.crash-popup org.tizen.system-syspopup
org.tizen.crash-viewer org.tizen.task-mgr
org.tizen.data-provider-slave org.tizen.usb-syspopup
org.tizen.datausage-syspopup org.tizen.usbotg-syspopup
org.tizen.download-manager org.tizen.volume
org.tizen.gps-syspopup org.tizen.wallpaper-ui-service-lite
org.tizen.host-devices org.tizen.widget_viewer_sdk
org.tizen.indicator org.tizen.wifi-direct-popup
org.tizen.installer setting-myaccount-efl
org.tizen.lockscreen setting-wifidirect-efl
org.tizen.lowbat-syspopup smartcard-service-server
org.tizen.lowmem-syspopup ug-bluetooth-efl
org.tizen.menu-screen ug-isfsetting-efl
org.tizen.mmc-syspopup ug-setting-mobileap-efl
org.tizen.mode-syspopup wifi-efl-ug
org.tizen.policy
----------------
2.3 WiFi work for me
sh-4.1# ls
cert-svc-ui org.tizen.policy
livebox.web-provider org.tizen.poweroff-syspopup
org.tizen.app-selector org.tizen.quickpanel
org.tizen.bluetooth-share-ui org.tizen.setting
org.tizen.bt-syspopup org.tizen.setting-location
org.tizen.calendar-notification org.tizen.system-signal-sender
org.tizen.crash-popup org.tizen.system-syspopup
org.tizen.crash-viewer org.tizen.task-mgr
org.tizen.data-provider-slave org.tizen.usb-syspopup
org.tizen.datausage-syspopup org.tizen.usbotg-syspopup
org.tizen.download-manager org.tizen.volume
org.tizen.gps-syspopup org.tizen.wallpaper-ui-service-lite
org.tizen.host-devices org.tizen.wifi-direct-popup
org.tizen.indicator setting-myaccount-efl
org.tizen.installer setting-wifidirect-efl
org.tizen.lockscreen smartcard-service-server
org.tizen.lowbat-syspopup ug-bluetooth-efl
org.tizen.lowmem-syspopup ug-isfsetting-efl
org.tizen.menu-screen ug-setting-mobileap-efl
org.tizen.mmc-syspopup wifi-efl-ug
org.tizen.mode-syspopup
sh-4.1# launch_app wifi-efl-ug
... successfully launched
sh-4.1# cd wifi-efl-ug
sh-4.1# ls
bin lib res shared
sh-4.1# cd bin
sh-4.1# ls
wifi-efl-UG
Will try to concentrate on wifi-efl-ug...
Will try to dump both folders from 2.3 and 2.3.1 and compare...
Will also better sort, seems more apps installed...
Best Regards
Pulled from working 2.3 filesystem...
Now I have flashed back to 2.3.1...
Need some time to check content... compare and so on...
Added WiFifrom231rdPQ.rar from 2.3.1 filesystem... NOT work for me.
Short compared and I can see major differences...
Code:
rm -r wifi-efl-ug
Delete in shell work... so I will try to replace folder with content of 2.3...
Later more...
Thanx for this info via PM...
But I can't try self as stupid me killed my RD-PQ...
But maybe someone else find this info usefull...
nice user said:
...I know how to fix the wifi connection on Tizen 2.3 and 2.3.1 for a RD-PQ device. The problem is that some links in the os are not properly created.
Basically you need to install the usleep package (https://download.tizen.org/releases...rmv7l/packages/armv7l/usleep-1-5.2.armv7l.rpm), it's for Tizen 2.2.1, but it does work for 2.3 and 2.3.1. After that, create two links that the wlan.sh shell script is expecting, and are not in the proper location.
ln -s /usr/sbin/modprobe /sbin/modprobe
ln -s /usr/sbin/rmmod /sbin/rmmod
Or, alternatively, you can pull the /usr/bin/wlan.sh file via sdb pull, change the /sbin/modprobe and /sbin/rmmod lines to /usr/sbin/modprobe and /usr/sbin/rmmod.
After doing that, from the phone, open Wifi and clicking on the green button will activate the wifi correctly and you will be able to connect to any wifi hotspot.
You can skip using the ui and perform the following commands :
/usr/bin/wlan.sh start
this will activate the wlan0 interface, which you can check by issuing a ifconfig command.
/usr/sbin/wpa_supp.sh start
this will start wpa supplicant.
Check if connmand is running (ps -ax and check the list), if not, you need to do :
systemctl start connman
systemctl enable connman
Click to expand...
Click to collapse
Thank you very much for this hint. :good:
Best Regards
Hey guys,
last week I disabled some Apps on my rooted OnePlus 5. Today in the morning, I needed to reboot the phone and then it happened. The phone hangs in a boot-loop. While booting, the red cycling OnePlus logo appears. After that I see very short the keys to type my code for the SIM card. Then, again the red cycling OnePlus logo.
Ok, ****... whats happens?
I think I disabled some wrong app. But which? I booted into the TWRP Recovery, start adb shell and have a look.
My thought was to enable all Apps with "pm" (PackageManager), but it isn't working in the TWRP Recovery Terminal:
Code:
CANNOT LINK EXECUTABLE "app_process": cannot locate symbol "_ZN7android14IPCThreadState11setBlockUidEib" referenced by "/system/lib64/libandroid_runtime.so"...
Aborted
I searched for some options to enable or disable an app. But I found only this from user arana1: https://forum.xda-developers.com/showpost.php?p=46287590&postcount=15
I also found a Java exception in /data/system/dropbox. There are many boot failure files:
Code:
/data/system/dropbox # ls -al
..
..
-rw------- 1 system system 1843 Dec 6 18:16 [email protected]_16_09_077.txt
-rw------- 1 system system 1843 Dec 6 18:16 [email protected]_16_19_819.txt
-rw------- 1 system system 1843 Dec 6 18:16 [email protected]_16_30_883.txt
-rw------- 1 system system 1843 Dec 6 18:16 [email protected]_16_41_800.txt
-rw------- 1 system system 1843 Dec 6 18:16 [email protected]_16_52_650.txt
-rw------- 1 system system 1843 Dec 6 18:17 [email protected]_17_03_520.txt
The content of the files are:
Code:
Process: system_server
Subject: SystemServer
Build: OnePlus/OnePlus5/OnePlus5:7.1.1/NMF26X/10171617:user/release-keys
android.util.Log$TerribleFailure: BOOT FAILURE Notifying Location Service running
at android.util.Log.wtf(Log.java:295)
at android.util.Slog.wtf(Slog.java:116)
at com.android.server.SystemServer.reportWtf(SystemServer.java:374)
at com.android.server.SystemServer.-wrap0(SystemServer.java)
at com.android.server.SystemServer$2.run(SystemServer.java:1524)
at com.android.server.am.ActivityManagerService.systemReady(ActivityManagerService.java:14993)
at com.android.server.SystemServer.startOtherServices(SystemServer.java:1446)
at com.android.server.SystemServer.run(SystemServer.java:353)
at com.android.server.SystemServer.main(SystemServer.java:238)
at java.lang.reflect.Method.invoke(Native Method)
at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:886)
at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:776)
Caused by: java.lang.IllegalStateException: Unable to find a fused location provider that is in the system partition with version 0 and signed with the platform certificate. Such a package is
needed to provide a default fused location provider in the event that no other fused location provider has been installed or is currently available. For example, coreOnly boot mode when decry
pting the data partition. The fallback must also be marked coreApp="true" in the manifest
at com.android.server.LocationManagerService.ensureFallbackFusedProviderPresentLocked(LocationManagerService.java:572)
at com.android.server.LocationManagerService.loadProvidersLocked(LocationManagerService.java:620)
at com.android.server.LocationManagerService.systemRunning(LocationManagerService.java:358)
at com.android.server.SystemServer$2.run(SystemServer.java:1522)
... 7 more
There you can see that android? can't find a "fused location provider". I'm to 90% sure that I disabled this app.
I found this, but I don't know how to use this or where it writes something:
https://developer.android.com/refer...ionEnabledSetting(java.lang.String, int, int)
Do you guys know how to enable a app in the /data partition without the package manager "pm"? Maybe editing some files?
I found the solution.
I disabled some app at my old android device with "pm disable <app>" and searched for modified files in the last one minute:
Code:
# find /system -mmin -1
I found this file:
Code:
/data/system/users/0/package-restrictions.xml
Search for the app "com.android.location.fused" in the file and found this line:
Code:
<pkg name="com.android.location.fused" ceDataInode="2101300" enabled="3" enabledCaller="shell:0" />
Deleted the enabled and enabledCaller attribute:
Code:
<pkg name="com.android.location.fused" ceDataInode="2101300" />
Saved the file and successfully rebooted the phone! Yeah!
Thanks to user Marc.2377 at Stackoverflow for the hint to delete this both attributes.
That definitely what i call an autonoumous man
thanks, it also worked for j1m galaxy
Thanks so much!
I've been trying for hours to activate adb during boot before /data decryption and a bunch of other stuff.
You're a hero!
You definitely saved my life!
dickdickerson said:
I found the solution.
I disabled some app at my old android device with "pm disable <app>" and searched for modified files in the last one minute:
Code:
# find /system -mmin -1
I found this file:
Code:
/data/system/users/0/package-restrictions.xml
Search for the app "com.android.location.fused" in the file and found this line:
Code:
<pkg name="com.android.location.fused" ceDataInode="2101300" enabled="3" enabledCaller="shell:0" />
Deleted the enabled and enabledCaller attribute:
Code:
<pkg name="com.android.location.fused" ceDataInode="2101300" />
Saved the file and successfully rebooted the phone! Yeah!
Click to expand...
Click to collapse
Your solution worked like a charm! For my part, the package-restrictions.xml was a little bit different, I had to replace that piece of code:
Code:
<pkg name="com.android.location.fused" ceDataInode="1223">
<disabled-components>
<item name="com.android.location.fused.FusedLocationService" />
</disabled-components>
</pkg>
with this one:
Code:
<pkg name="com.android.location.fused" ceDataInode="1223">
<enabled-components>
<item name="com.android.location.fused.FusedLocationService" />
</enabled-components>
</pkg>
(replaced "disabled-component" node with "enabled-component").
Then that's it. Back to business with all my data kept!
Thanks again!
saved my ass! Xiaomi Redmi Note 7
I disabled the miaccount or micloud services and couldn't log into the phone because of it's inbuild security system.
I had the RPC error trying to reactivate the phone.
This solution worked out like a charm for me. Same steps. Thank you!
dickdickerson said:
I found the solution.
I disabled some app at my old android device with "pm disable <app>" and searched for modified files in the last one minute:
Code:
# find /system -mmin -1
I found this file:
Code:
/data/system/users/0/package-restrictions.xml
Search for the app "com.android.location.fused" in the file and found this line:
Code:
<pkg name="com.android.location.fused" ceDataInode="2101300" enabled="3" enabledCaller="shell:0" />
Deleted the enabled and enabledCaller attribute:
Code:
<pkg name="com.android.location.fused" ceDataInode="2101300" />
Saved the file and successfully rebooted the phone! Yeah!
Thanks to user Marc.2377 at Stackoverflow for the hint to delete this both attributes.
Click to expand...
Click to collapse
Man you saved my ass.
I disabled MI Account (com.xiaomi.account) and got locked out of the device asking to unlock by entering xiaomi account password, but I could not enable by entering the password cause I had the ****ing application disabled.
Respect for you, bruh...
This needs to go in a "so you pwn3d yourself n00b" FAQ somewhere. (Even though I've been doing this for years... )
You saved me an EDL mode flash, thank you sir.
dickdickerson said:
I found the solution.
Click to expand...
Click to collapse
You're a fckn lifesaver. Thanks so much. I really hope someone turns this into a update.zip that can be flashed or a windows script that works on recovery adb