My phone is Live With Walkman, Carbon rom, 4.4.2
I flashed a gapps, but it doesn't work correctly,
I want to flash another gapps on my rom.
What I have to do?
how can i flash another gapps on this gapps?
mzandi17 said:
My phone is Live With Walkman, Carbon rom, 4.4.2
I flashed a gapps, but it doesn't work correctly,
I want to flash another gapps on my rom.
What I have to do?
how can i flash another gapps on this gapps?
Click to expand...
Click to collapse
hi, you can flash these: http://goo.im/devs/BaNkS/GApps/4.4.2 choose the minimal package. (the normal just include g+ & gmail, which u can install from playstore)
but maybe you need to make a clean install (da a wipe data/factory reset) ; flash ROM + gapps, done.
but 1st just installl gapps from link abobe & see if all is fine may
bejunk said:
hi, you can flash these: http://goo.im/devs/BaNkS/GApps/4.4.2 choose the minimal package. (the normal just include g+ & gmail, which u can install from playstore)
but maybe you need to make a clean install (da a wipe data/factory reset) ; flash ROM + gapps, done.
but 1st just installl gapps from link abobe & see if all is fine may
Click to expand...
Click to collapse
Thanks,
If i want to flash the new Gapps on existing rom, and existing Gapps, do i have to wipe data/factory reset, after flashing?
mzandi17 said:
Thanks,
If i want to flash the new Gapps on existing rom, and existing Gapps, do i have to wipe data/factory reset, after flashing?
Click to expand...
Click to collapse
no , do this:
1 flash the gapps package i gave you link. (no wipes need just falsh)
-->if all worked then its fine.:highfive: (done)
-->if not worked: the go CWM, do wipe data/factory reset (deletes all user data..)NOW FLASH GAPPS. boot
bejunk said:
no , do this:
1 flash the gapps package i gave you link. (no wipes need just falsh)
-->if all worked then its fine.:highfive: (done)
-->if not worked: the go CWM, do wipe data/factory reset (deletes all user data..)NOW FLASH GAPPS. boot
Click to expand...
Click to collapse
thank you very much, it worked without wiping,
i have another question,
if i want to flash a new kernel on existing kernel and existing rom, what i have to do?
sorry about my low level questions.
mzandi17 said:
thank you very much, it worked without wiping,
i have another question,
if i want to flash a new kernel on existing kernel and existing rom, what i have to do?
sorry about my low level questions.
Click to expand...
Click to collapse
1. make sure kernel is compatible with ur current ROM (very important)
2. do a backup.
3. connect the phone via fastboot & flash the desired kernel as allways
4. boot right into CWM , wipe dalvik-cache & chache
5. boot. done
bejunk said:
1. make sure kernel is compatible with ur current ROM (very important)
2. do a backup.
3. connect the phone via fastboot & flash the desired kernel as allways
4. boot right into CWM , wipe dalvik-cache & chache
5. boot. done
Click to expand...
Click to collapse
thans alot :good:
Related
FXP said:
HOWTO
Install instructions:
1. Install a Recovery (there are some around this forum)
2. Flash Rom
3. Flash gapps
4. Wipe (only required 1st time)
5. Flash kernel (fastboot flash boot boot.img)
Click to expand...
Click to collapse
Hope I'm not making a fool out of myself..
But, why are the instructions in that order?
The normal way to go is:
Flash kernel > factory/cache partition/system/dalvik cache wipe > Install the ROM > Install any .zip (fixes, addons, apps) > Reboot.
Is there any specific reason why the steps mentioned by the OP are in this order?
Thank you!
hmnk said:
Hope I'm not making a fool out of myself..
But, why are the instructions in that order?
The normal way to go is:
Flash kernel > factory/cache partition/system/dalvik cache wipe > Install the ROM > Install any .zip (fixes, addons, apps) > Reboot.
Is there any specific reason why the steps mentioned by the OP are in this order?
Thank you!
Click to expand...
Click to collapse
Replace 1 with 5 and then install.
evilbarcode said:
Replace 1 with 5 and then install.
Click to expand...
Click to collapse
Aye aye..
BTW, just out of inquisitiveness, why did the OP mention the steps in that order?
hmnk said:
Aye aye..
BTW, just out of inquisitiveness, why did the OP mention the steps in that order?
Click to expand...
Click to collapse
Not too sure, I have a slight feeling they messed up when writing it all down. But kernel is always first. After kernel dont boot the rom, just power on and head to recovery. Full wipe, format system, install rom, install gapps, full wipe and wipe dalvik cache, then reboot and watch the magic.
evilbarcode said:
Not too sure, I have a slight feeling they messed up when writing it all down. But kernel is always first. After kernel dont boot the rom, just power on and head to recovery. Full wipe, format system, install rom, install gapps, full wipe and wipe dalvik cache, then reboot and watch the magic.
Click to expand...
Click to collapse
Haha ok..
CM9 was great itself, now lets see what CM10 has in store for me
evilbarcode said:
Not too sure, I have a slight feeling they messed up when writing it all down. But kernel is always first. After kernel dont boot the rom, just power on and head to recovery. Full wipe, format system, install rom, install gapps, full wipe and wipe dalvik cache, then reboot and watch the magic.
Click to expand...
Click to collapse
It doesn't matter, if you have recovery in previous ROM you can flash new ROM first in old reco and then flash kernel in fastboot.
May be the answer lies in here..
hmnk said:
Ok problem solved..
build.prop error means I have to use a Kernel that doesn't verify name in build.prop..
So I tried expeacer's MIUI Kernel(Extended stock kernel) and I was able to install CM10..
This info was courtesy of metalrawk
This could possibly be the reason why FXP instructed to flash the Kernel after ROM installation
Click to expand...
Click to collapse
evilbarcode said:
Replace 1 with 5 and then install.
Click to expand...
Click to collapse
that is the best way, it worked for me thanks a lot
tnx
Tnx it helped me too
Hello.
I want to instal parandroid on z ultra and i have some questions:
1) where can i found aospa/cm11 ZIP (from step 2 of instalation guid)
2) witch 4+ version is stable (nonbeta)
3) on z ultra have i the lateral bar with the home buton?
4) on this rom can move the app to sd, because on stock rom i can't(phone is rooted)
5) can i instal it on a full stock phone(only bootloader is unlocked, no recovery,no root), because i guess that the boot.img (from step 2 of instalation guid) is a kernel with recovery.
Thanck you.
Ps i tried to ask Beerbong or in his thread but i coudn't because i don't have 10 post.
1) In the CM11 thread
2) the boot.img is inside the CM zip
3) I don't understand
4) I don't know
5) Yes. You're right. That's why you have to flash the boot.img first, so you get Recovery
Sent from my C6833_GPe using Tapatalk
In the z ultra parandroid post is a nexus 5 witch have the homebar(place where are the option; home and back comands) in the right side of The display.
Look At the second img from the parandroid thread
CHINEZU097 said:
In the z ultra parandroid post is a nexus 5 witch have the homebar(place where are the option; home and back comands) in the right side of The display.
Look At the second img from the parandroid thread
Click to expand...
Click to collapse
Oh, that's PIE and you can use that too if you want to.
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
CHINEZU097 said:
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
Click to expand...
Click to collapse
The boot.img in the Paranoid Android zip is fine. Extract that and flash it using fastboot/FlashTool. You'll now have a recovery with which you can install the Paranoid Android system. Access the recovery by powering on the device, then holding Volume Up as soon as the LED turns green.
CHINEZU097 said:
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
Click to expand...
Click to collapse
As above for thr boot.img
Carbon has PIE as well, but build 18 seems a little unstable
One more question.
I read în s4 and nexus 5 parandroid threads and i saw the instructions in the next format:
Samsung
update to the last custom recovery
wipe data/factory reset
flash rom and gapps
wipe cache and dalvik
Nexus
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
At the z ultra they said that we need to instal rom and then to factory reset and then wipe data and dalvik.
Anyway. What make me suspicious is that factory reset after instal rom. I talk with somebody and he told me that i will brick my Phone if i will do that. So i want to do next instalation Guid:
1) flash a New ftf file(the last)
2) flash that boot.img( what i find in parandroid.ZIP)
3) factory reset.
4) wipe data(i saw that i can do it At the same time when info factory reset, because în twrp, At wipe option i can check all data(inclusive dalvik)
5) instal rom
6) instal gapps
7) do a again Point 4
8) flash su
9)it's done
CHINEZU097 said:
One more question.
I read în s4 and nexus 5 parandroid threads and i saw the instructions in the next format:
Samsung
update to the last custom recovery
wipe data/factory reset
flash rom and gapps
wipe cache and dalvik
Nexus
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
At the z ultra they said that we need to instal rom and then to factory reset and then wipe data and dalvik.
Anyway. What make me suspicious is that factory reset after instal rom. I talk with somebody and he told me that i will brick my Phone if i will do that. So i want to do next instalation Guid:
1) flash a New ftf file(the last)
2) flash that boot.img( what i find in parandroid.ZIP)
3) factory reset.
4) wipe data(i saw that i can do it At the same time when info factory reset, because în twrp, At wipe option i can check all data(inclusive dalvik)
5) instal rom
6) instal gapps
7) do a again Point 4
8) flash su
9)it's done
Click to expand...
Click to collapse
1. update to latest FTF (757)
2. Copy ROM to external sdcard
3. Flash boot.img with flashtool or fastboot
4. Wipe /data and both caches (I have a feeling only /data is needed) (factory reset)
5. Flash ROM
6. Flash Gapps
7. su should be included so reboot
Problem with my phone also.....
Sent from my GT-S7392 using XDA Free mobile app
Tnx
blueether said:
1. update to latest FTF (757)
2. Copy ROM to external sdcard
3. Flash boot.img with flashtool or fastboot
4. Wipe /data and both caches (I have a feeling only /data is needed) (factory reset)
5. Flash ROM
6. Flash Gapps
7. su should be included so reboot
Click to expand...
Click to collapse
after flash gapps did i need to rewipe data and both caches?
CHINEZU097 said:
after flash gapps did i need to rewipe data and both caches?
Click to expand...
Click to collapse
I don't normally.
blueether said:
I don't normally.
Click to expand...
Click to collapse
HHHEEEELLLLPPPPP!!!!!!
i flashed the 757 ftf(all was ok)
i started the phone(all was ok)
i flashed the boot.img(all was ok)
i powered on the pfone, i entered in cwm(vol+)(all was ok)
i restarted the phone and i tried to enter in trwm(vol-)(all was bad) it dont entered.
i hard reseted(pred red button
i powered it on and it stay freeze at sony logo.
help mee!!!
if i reflash ftf file it will realive?
i have another file.img with dual recovey(file witch i used to root it). is it goot for what i need now?
i just test the phone in fastmode and flashmode and its ok, my flashtool see my device.
help somebody!!!
i am so scaried!!!
thats fine. i make it. i flash the hamdogg kernel and it is ok.
my question is:
can i intal room with this kernel?
if i cant please send me a link with a good kernel.
CHINEZU097 said:
thats fine. i make it. i flash the hamdogg kernel and it is ok.
my question is:
can i intal room with this kernel?
if i cant please send me a link with a good kernel.
Click to expand...
Click to collapse
Yes it should work.
Most custom ROMs only include cwm recovery.
It froze at the boot logo as the kernel and system were incompatible, if you had of rebooted (vol. up and power button) and entered cwm again you could have made a nandroid and then installed the ROM
blueether said:
Yes it should work.
Most custom ROMs only include cwm recovery.
It froze at the boot logo as the kernel and system were incompatible, if you had of rebooted (vol. up and power button) and entered cwm again you could have made a nandroid and then installed the ROM
Click to expand...
Click to collapse
No. After first rebot it was compleatly frozen and i couldnt enter in recovery.
So if the kernel was incompatible, i think the kernel is for another version and i will ask on parandroid thread because it have no post ubtil 30 sept 2013.
CHINEZU097 said:
No. After first rebot it was compleatly frozen and i couldnt enter in recovery.
So if the kernel was incompatible, i think the kernel is for another version and i will ask on parandroid thread because it have no post ubtil 30 sept 2013.
Click to expand...
Click to collapse
the kernel was fine, it will boot any of the 4 variants
blueether said:
the kernel was fine, it will boot any of the 4 variants
Click to expand...
Click to collapse
Tnx, but i used jackyees kernel.
My actualy problem is with the sim. I cant acces the contacts( when i try to import from sim it dont fint them.) i checked my sim and its ok.
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
blahsum said:
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
Click to expand...
Click to collapse
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Sureshtuty said:
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Click to expand...
Click to collapse
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
blahsum said:
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
Click to expand...
Click to collapse
I mean before flashing any custom rom flash stock rom then flash that rom which u want.
1.download stock firmware flash it with odin
2.then flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Excellent, thank you!
A few tips to anyone looking this up:
First, I used Heimdall - but apparently Odin is quite similar.
I had to unpack the stock rom and then individually flash the factoryfs and zimage files.
I then unpacked the Phils mod and flashed the zimage again.
That was all in download mode
After that I flashed CM12 in recovery mode.
i have a nandroid backup of boot,system,data on my sd card,by mistake i formatted my internal storage now when i restored my backup i am getting boot loops plz help
Wipe system, data, cache & dalvik cache then restore the backup.
Joshwin Aranha said:
Wipe system, data, cache & dalvik cache then restore the backup.
Click to expand...
Click to collapse
I did that
after restoring it boots than a black screen appears where only power button works.
i can boot into my twrp from there if i flash stock rom will it work ?
or will i have to flash stock recovery before flashing stock rom ?
W!ld said:
i can boot into my twrp from there if i flash stock rom will it work ?
or will i have to flash stock recovery before flashing stock rom ?
Click to expand...
Click to collapse
Stock Recovery - Download
Stock ROM - Download
Source - Here
Instructions:
1. Download both the ROM & Recovery
2. Flash the OnePlus Recovery by fastboot
3. Copy the ROM to your Device
4. Boot into OnePlus Recovery
5. Selct English Language, then Install from Local, Find the ROMs zip file, and select it.
6. Flashing will begin, after it completes, reboot the device if it does not automatically reboot.
7. Profit
Edit - After this, you can flash back TWRP again.
Joshwin Aranha said:
Stock Recovery - Download
Stock ROM - Download
Source - Here
Instructions:
1. Download both the ROM & Recovery
2. Flash the OnePlus Recovery by fastboot
3. Copy the ROM to your Device
4. Boot into OnePlus Recovery
5. Selct English Language, then Install from Local, Find the ROMs zip file, and select it.
6. Flashing will begin, after it completes, reboot the device if it does not automatically reboot.
7. Profit
Edit - After this, you can flash back TWRP again.
Click to expand...
Click to collapse
thanks a lot!
can't i directly flash stock rom from twrp instead of flashing stock recovery?
W!ld said:
thanks a lot!
can't i directly flash stock rom from twrp instead of flashing stock recovery?
Click to expand...
Click to collapse
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Joshwin Aranha said:
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Click to expand...
Click to collapse
Thanks a lot !!
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
Joshwin Aranha said:
Sure, you can. Just wipe everything, other than Internal Storage, the go to Install, select the Stock ROMs zip, swipe to confirm flash, when its done, wipe cache & dalvik and reboot.
Click to expand...
Click to collapse
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
W!ld said:
i flashed stock recovery then flashed rom .
But after rebooting it loads forever.
Click to expand...
Click to collapse
Thats strange, did you flash anything else with the ROM ? Any mods etc ?
Are you sure your data, cache & system partitions are in ext4 filesystems ?
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
Joshwin Aranha said:
Thats strange, did you flash anything else with the ROM ? Any mods etc ?
Are you sure your data, cache & system partitions are in ext4 filesystems ?
Click to expand...
Click to collapse
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
W!ld said:
earlier i flashed blu spark kernel and converted data and cache to f2fs.
but now i installed stock recovery and flashed only stock rom nothing else.
Click to expand...
Click to collapse
Thats the problem LoL, convert /data & /cache to ext4 again, then do a full wipe again, then flash the ROM, then when it completes, wipe cache & dalvik & reboot.
Joshwin Aranha said:
Thats the problem LoL, convert /data & /cache to ext4 again, then do a full wipe again, then flash the ROM, then when it completes, wipe cache & dalvik & reboot.
Click to expand...
Click to collapse
i have checked data system cache all are ext4.
flashed once again still in boot loop.
this is scary now please help.
W!ld said:
i have checked data system cache all are ext4.
flashed once again still in boot loop.
this is scary now please help.
Click to expand...
Click to collapse
Can you post screenshots of your data, system & cache being ext4 ?
Also, when you're flashing this ROM, dont flash anything else, Nothing at all, only this 800MB zip package.
Edit - Use TWRP for all this.
Joshwin Aranha said:
Can you post screenshots of your data, system & cache being ext4 ?
Also, when you're flashing this ROM, dont flash anything else, Nothing at all, only this 800MB zip package.
Edit - Use TWRP for all this.
Click to expand...
Click to collapse
could it be due to boot.img or something..
ya psoting screenshots 1 min
W!ld said:
could it be due to boot.img or something..
ya psoting screenshots 1 min
Click to expand...
Click to collapse
Are there any errors during the Flashing of ROM package ?
Joshwin Aranha said:
Are there any errors during the Flashing of ROM package ?
Click to expand...
Click to collapse
no errors
Joshwin Aranha said:
Are there any errors during the Flashing of ROM package ?
Click to expand...
Click to collapse
2 of above screenshot is of internal storage state
I want to go back to stock rom from lineage os.
But I don't want to lose twrp,so that i can root again(miui)
Can any one guide me ?
If i use fast boot method it will flash stock recovery.
nik_123 said:
I want to go back to stock rom from lineage os.
But I don't want to lose twrp,so that i can root again(miui)
Can any one guide me ?
If i use fast boot method it will flash stock recovery.
Click to expand...
Click to collapse
Quite simple actually! Thats how I did it:
Download the MIUI Rom you want
Put the zip on your phone
Reboot to recovery (TWRP)
select WIPE and do a data/factory reset
go back and press on INSTALL
install / flash the MIUI zip
then you should probably wipe cache dalvik
reboot
done
Rik00 said:
Quite simple actually! Thats how I did it:
Download the MIUI Rom you want
Put the zip on your phone
Reboot to recovery (TWRP)
select WIPE and do a data/factory reset
go back and press on INSTALL
install / flash the MIUI zip
then you should probably wipe cache dalvik
reboot
done
Click to expand...
Click to collapse
Will it keep the recovery or overwrite ?