So, is there any easy way to change the Tab 12.2 and keep USB as a data connection?
something like this?
http://www.ebay.com/itm/4-Ports-Mic...TG-PC-Laptop-Smartphone-Table-B-/161222133020
xhanatos said:
something like this?
ebay.com/itm/4-Ports-Micro-USB-2-0-HUB-Charger-Apdater-Cable-OTG-PC-Laptop-Smartphone-Table-B-/161222133020
Click to expand...
Click to collapse
That looks promising. Has anyone tried it yet? Just ordered one and will post if it works or not.
I haven't tried it but would like to know if it did.
Ordered but it's going to be a while. Didn't realise until after I placed the order that it's coming from China. Estimated delivery between June 20 and July 24. Order status says shipped already, but I've had stuff stuck in NY Customs for a few weeks on more than one occasion.
I just found this why searching for an answer to this. Suppose to work with all 6 devices!!! (8.4, 10.1, 12.2, Tab/Pro)
http://lavalink.com/products/tablet...taneous-charge-for-tab-4-tab-pro-4-usb-1-lan/
matthelm said:
I just found this why searching for an answer to this. Suppose to work with all 6 devices!!! (8.4, 10.1, 12.2, Tab/Pro)
http://lavalink.com/products/tablet...taneous-charge-for-tab-4-tab-pro-4-usb-1-lan/
Click to expand...
Click to collapse
Nice. Maybe it'll go into production before I receive the adapter I ordered, lol. Still stuck at China Post.
Jerryo100 said:
That looks promising. Has anyone tried it yet? Just ordered one and will post if it works or not.
Click to expand...
Click to collapse
The power point is used to power the connected devices and doesn't power/charge the tablet.
Plus it's only powerful enough to power USB devices, it will not power 2.5 " HDD's for example.
0-0-0 said:
The power point is used to power the connected devices and doesn't power/charge the tablet.
Plus it's only powerful enough to power USB devices, it will not power 2.5 " HDD's for example.
Click to expand...
Click to collapse
Did you order one of these? If not, I'm curious as to where your getting the specs from. I'm hoping your wrong of course, lol. My external 2.5" HDD runs perfectly with 500ma, so if I had my 2100ma USB wall wort powering this adapter, I would assume I would get 500ma (if the power is being limited) or more out of the 2 usb ports. Unless Samsung is planning on selling an overpriced breakout box, I don't understand why they would cripple such a nice tablet with this one port for everything crap.
Jerryo100 said:
Did you order one of these? If not, I'm curious as to where your getting the specs from. I'm hoping your wrong of course, lol. My external 2.5" HDD runs perfectly with 500ma, so if I had my 2100ma USB wall wort powering this adapter, I would assume I would get 500ma (if the power is being limited) or more out of the 2 usb ports. Unless Samsung is planning on selling an overpriced breakout box, I don't understand why they would cripple such a nice tablet with this one port for everything crap.
Click to expand...
Click to collapse
I ordered the 1 port version, not the 2 ports version mentioned above.
It's true the tablet can power 2.5 HDD's when connected to any/most OTG cables, but I also wanted to use it with a phone (which needs the HDD to be connected to a power source).
After I sent the 1 port version back, I looked at buying the 2 port version, but after reading the small print, I found out the tablet couldn't be powered/charged, the power point was used to power the connected devices.
Two examples of the 2 ports version I looked at:
http://www.amazon.co.uk/Micro-Adapter-Cable-Galaxy-EXCITES/dp/B00J2QID16/ref=sr_1_29?ie=UTF8&qid=1402734708&sr=8-29&keywords=otg+cable
http://www.amazon.co.uk/Kool-TM-Adapter-Samsung-Smartphones/dp/B00K73U1O0/ref=sr_1_42?ie=UTF8&qid=1402734715&sr=8-42&keywords=otg+cable
The USB Power Port only supplies extra power to the dual OTG ports. It will not charge your mobile phone or tablet.
Click to expand...
Click to collapse
The 2 port version, obviously will work when connecting 2 devices at once, but the power point, won't be any use, as the tablet will already be powering the devices.
That's my understanding of it.
0-0-0 said:
I ordered the 1 port version, not the 2 ports version mentioned above.
It's true the tablet can power 2.5 HDD's when connected to any/most OTG cables, but I also wanted to use it with a phone (which needs the HDD to be connected to a power source).
After I sent the 1 port version back, I looked at buying the 2 port version, but after reading the small print, I found out the tablet couldn't be powered/charged, the power point was used to power the connected devices.
Two examples of the 2 ports version I looked at:
http://www.amazon.co.uk/Micro-Adapter-Cable-Galaxy-EXCITES/dp/B00J2QID16/ref=sr_1_29?ie=UTF8&qid=1402734708&sr=8-29&keywords=otg+cable
http://www.amazon.co.uk/Kool-TM-Adapter-Samsung-Smartphones/dp/B00K73U1O0/ref=sr_1_42?ie=UTF8&qid=1402734715&sr=8-42&keywords=otg+cable
The 2 port version, obviously will work when connecting 2 devices at once, but the power point, won't be any use, as the tablet will already be powering the devices.
That's my understanding of it.
Click to expand...
Click to collapse
Just got this adapter in: http://www.ebay.com/itm/4-Ports-Micro-USB-2-0-HUB-Charger-Apdater-Cable-OTG-PC-Laptop-Smartphone-Table-B-/161222133020
It does not charge the tablet. It does supply power to the 2 usb ports even when disconnected from the tablet. It is an inexpensive alternative to the Samsung otg to usb adapter I purchased for $19.99.
Hopefully Samsung or some other company comes out with an adapter that can charge the tablet and has usb and hdmi ports.
matthelm said:
I just found this why searching for an answer to this. Suppose to work with all 6 devices!!! (8.4, 10.1, 12.2, Tab/Pro)
http://lavalink.com/products/tablet...taneous-charge-for-tab-4-tab-pro-4-usb-1-lan/
Click to expand...
Click to collapse
BTW, Lava contacted me, and said end of June. 2 more weeks. I'll order one as soon as I can, and will report the results. (I'm not 100% use which model I'll be getting, but they should be the same with just parts/ports missing)
matthelm said:
BTW, Lava contacted me, and said end of June. 2 more weeks. I'll order one as soon as I can, and will report the results. (I'm not 100% use which modem I'll be getting, but they should be the same with just parts/ports missing)
Click to expand...
Click to collapse
I wish they'd make one that also included HDMI.
So you could charge your device, connect a HDD/USB and play the contents to a TV.
matthelm said:
BTW, Lava contacted me, and said end of June. 2 more weeks. I'll order one as soon as I can, and will report the results. (I'm not 100% use which modem I'll be getting, but they should be the same with just parts/ports missing)
Click to expand...
Click to collapse
0-0-0 said:
I wish they'd make one that also included HDMI.
So you could charge your device, connect a HDD/USB and play the contents to a TV.
Click to expand...
Click to collapse
Nice find. I'm with 0-0-0 on the included HDMI. Just got this reply from them "nothing planned for hdmi. our current adapter will work with your 12.2 inch tablet on just usb though." Maybe if enough people contacted them stating their interest, they might develop one. Easy to send a message right from the product page requesting this.
Jerryo100 said:
Nice find. I'm with 0-0-0 on the included HDMI. Just got this reply from them "nothing planned for hdmi. our current adapter will work with your 12.2 inch tablet on just usb though." Maybe if enough people contacted them stating their interest, they might develop one. Easy to send a message right from the product page requesting this.
Click to expand...
Click to collapse
Wouldn't any of the USB to HDMI converters hooked to one of the USB ports work??? (just asking, have no intention of hooking it up)
matthelm said:
Wouldn't any of the USB to HDMI converters hooked to one of the USB ports work??? (just asking, have no intention of hooking it up)
Click to expand...
Click to collapse
I don't think an MHL adapter works with a regular USB port. Not 100% sure though. Just ordered a male USB to female micro USB to try, lol. Even if it doesn't work, that's one adapter I don't already own. If it works through this adapter I purchased: http://www.ebay.com/itm/4-Ports-Micro-USB-2-0-HUB-Charger-Apdater-Cable-OTG-PC-Laptop-Smartphone-Table-B-/161222133020 then it should work through that Lava adapter.
hdmi, usb , & charge at the same time
0-0-0 said:
I wish they'd make one that also included HDMI.
So you could charge your device, connect a HDD/USB and play the contents to a TV.
Click to expand...
Click to collapse
Jerryo100 said:
Nice find. I'm with 0-0-0 on the included HDMI. Just got this reply from them "nothing planned for hdmi. our current adapter will work with your 12.2 inch tablet on just usb though." Maybe if enough people contacted them stating their interest, they might develop one. Easy to send a message right from the product page requesting this.
Click to expand...
Click to collapse
matthelm said:
Wouldn't any of the USB to HDMI converters hooked to one of the USB ports work??? (just asking, have no intention of hooking it up)
Click to expand...
Click to collapse
here u go guys...meant to post this almost a week ago when i saw the topic. i ordered one for my tab pro 8.4 lte (should work for every variant though) & it works great...u can use hdmi (takes the regular full sized cable) with a hard drive/flash drive or large sdcard connected simultaneously while charging your device but the charger doesnt even need to be plugged up for hdmi to work. The bonus for me was that i won mine in an auction & only paid $4 for it (normally around $10 as u can see from the link which still isnt bad)...if there is any negative about this thing its all the weight/stress resting on that lil micro usb connection which means it basically needs to be placed perfectly flat. They also have a dock version which should solve that issue for around $20 which i plan to order & test at some point...hope this helps other users out with your decision
http://www.ebay.com/itm/NEW-Micro-USB-OTG-SD-TF-Card-Reader-Writer-HUB-MHL-To-HDMI-HDTV-TV-Adapter-/131216319273?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item1e8d1a2329
THEDEVIOUS1 said:
http://www.ebay.com/itm/NEW-Micro-USB-OTG-SD-TF-Card-Reader-Writer-HUB-MHL-To-HDMI-HDTV-TV-Adapter-/131216319273?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item1e8d1a2329
Click to expand...
Click to collapse
What a pity, doesn't ship to Germany or Switzerland...
burningstep said:
What a pity, doesn't ship to Germany or Switzerland...
Click to expand...
Click to collapse
try the link below...i checked the shipping exclusions so u should be good to go
http://www.ebay.com/itm/Micro-USB-OTG-TF-Card-Reader-Writer-HUB-MHL-To-HDMI-For-Samsung-Note-3-/191218384443?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item2c8580fe3b
@burningstep
yep...this DEFINITELY works simultaneously. I use it to watch movies from my usb external on my pico projector that are both connected to the tab pro...u wont be disappointed, in fact, i was surprised that it didnt even need the charger attached because it was necessary for both of my other tabs (the original 7 & the tab plus) although u will want to plug it up anyway or your battery is gonna get burned up pretty quick
THEDEVIOUS1 said:
try the link below...i checked the shipping exclusions so u should be good to go
http://www.ebay.com/itm/Micro-USB-OTG-TF-Card-Reader-Writer-HUB-MHL-To-HDMI-For-Samsung-Note-3-/191218384443?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item2c8580fe3b
Click to expand...
Click to collapse
Great, thank you very much.
And you're sure, that HDMI and USB-OTG and Tablet-Charging works at the same time? Thus, I'll be able to play a video from an external harddisk to my TV over HDMI out.
Related
I was under the impression that Note 3 supported MHL 2.0 but when I plug in the official HDTV adapter from Samsung (model number ET-H10FAUWEGWW) I still need to also use a USB charger to get it to show through the HDMI input on my TV?
If I don't I get a continual on-screen message on the phone "HDMI cable connected/disconnected" flashing/cycling until I plug-in the Micro USB charger cable on the side of the HDTV adapter.
Any thoughts appreciated
Your TV would have to have the MHL adapter which would mean you would have had to buy it most likely this year. If you are just plugging it into a regular HDMI slot there is not power available this is why you need to hook up the adapter.
arsmithsr said:
Your TV would have to have the MHL adapter which would mean you would have had to buy it most likely this year. If you are just plugging it into a regular HDMI slot there is not power available this is why you need to hook up the adapter.
Click to expand...
Click to collapse
Thanks, didn't see that anywhere in the small print or YouTube reviews. Looks like I need a new tv, lol.
Sent from my SM-N9005 using Tapatalk
optical10 said:
I was under the impression that Note 3 supported MHL 2.0 but when I plug in the official HDTV adapter from Samsung (model number ET-H10FAUWEGWW) I still need to also use a USB charger to get it to show through the HDMI input on my TV?
If I don't I get a continual on-screen message on the phone "HDMI cable connected/disconnected" flashing/cycling until I plug-in the Micro USB charger cable on the side of the HDTV adapter.
Any thoughts appreciated
Click to expand...
Click to collapse
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
optical10 said:
Thanks, didn't see that anywhere in the small print or YouTube reviews. Looks like I need a new tv, lol.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
You definitely do not need an MHL input when using this adapter. The whole point of the adapter is to go from MHL (the Note 3 output) to HDMI (the TV input). If you have an MHL input on your TV or receiver all you need is a cable (basically what's in the white box is built into your TV already).
I second the opinion that you got a knock-off. I have both adapters from Samsung and neither of them need external power to operate with a Note 3.
The only restriction with the MHL 2.0 adapter is that it requires that you plug it into a TV and not a receiver, and it will tell you in no uncertain terms if you don't plug it in correctly.
The only reason to plug in power is that it stops your battery draining so fast, the charger provides about 700mA charging current to the N3.
babyshanks said:
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
Click to expand...
Click to collapse
Could you post a link to the seller you got yours from, or PM me with the info if XDA doesn't allow that? I'd like to get one myself, and like that you have already tried and had good results with yours.
toddnbrown said:
Could you post a link to the seller you got yours from, or PM me with the info if XDA doesn't allow that? I'd like to get one myself, and like that you have already tried and had good results with yours.
Click to expand...
Click to collapse
http://www.samsung.com/us/mobile/cell-phones-accessories/ET-H10FAUWESTA
toddnbrown said:
Could you post a link to the seller you got yours from, or PM me with the info if XDA doesn't allow that? I'd like to get one myself, and like that you have already tried and had good results with yours.
Click to expand...
Click to collapse
Here's the link: http://www.amazon.com/VicTsing-Micr...e=UTF8&qid=1384305065&sr=8-4&keywords=mhl+2.0
Fair warning though; this adapter is not perfect by any means, you can read my review on amazon (the one that tested it out on the note 3). As noted in my review, I am still waiting on a replacement one (since the original one I got functioned but didn't charge when I hooked up my power adapter), and I'll let you guys know if it's better once I receive it. Even though it doesn't function perfectly, for $10 dollars it does the trick.
Edit: They are sending me an extra without having to return the original, so even if the second one doesn't charge, at $5 a pop I'm happy.
babyshanks said:
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
Click to expand...
Click to collapse
Thanks for alerting me to the counterfeit reasoning that shows this part must be a copycat, I contacted the supplier of this part to us for a partial refund as I will use this as a backup and try and buy an original and prices drop from the £39 or take advice of the other replies in this thread and find a genuine 2.0 MHL non-Samsung version. I'll report back if I have any trouble with the supplier claiming that it is a genuine part and see how far eBay support me.
babyshanks said:
I believe you may have ended up getting a copycat adapter (A 1.0 instead of a 2.0), not official. I recently purchased a MHL 2.0 off amazon for $10 and it works just plugging in the tv hdmi without power. The one I got isn't a samsung one, but it is compatible with samsungs (11-pin I believe). The tv I'm plugging into is an OLD tv (got it when hdmi was just coming out) and it works without using an external source- also working fine on my newer tvs. I believe the power for MHL 2.0 is suppose to come from your phone so the tv shouldn't be the problem.
Click to expand...
Click to collapse
CraigAmey said:
You definitely do not need an MHL input when using this adapter. The whole point of the adapter is to go from MHL (the Note 3 output) to HDMI (the TV input). If you have an MHL input on your TV or receiver all you need is a cable (basically what's in the white box is built into your TV already).
I second the opinion that you got a knock-off. I have both adapters from Samsung and neither of them need external power to operate with a Note 3.
The only restriction with the MHL 2.0 adapter is that it requires that you plug it into a TV and not a receiver, and it will tell you in no uncertain terms if you don't plug it in correctly.
The only reason to plug in power is that it stops your battery draining so fast, the charger provides about 700mA charging current to the N3.
Click to expand...
Click to collapse
Thanks babyshanks and CraigAmey for clarifying and also confirming that I don't need it new TV to take advantage of MHL 2.0's not requirement for external USB power. As I said in my previous reply and with this information and going back to the supplier on eBay to us for a partial refund as I will keep this version of the adapter until prices come down from the genuine parts for fine art genuine MHL 2.0 adapter non-Samsung version.
CraigAmey said:
You definitely do not need an MHL input when using this adapter. The whole point of the adapter is to go from MHL (the Note 3 output) to HDMI (the TV input). If you have an MHL input on your TV or receiver all you need is a cable (basically what's in the white box is built into your TV already).
I second the opinion that you got a knock-off. I have both adapters from Samsung and neither of them need external power to operate with a Note 3.
The only restriction with the MHL 2.0 adapter is that it requires that you plug it into a TV and not a receiver, and it will tell you in no uncertain terms if you don't plug it in correctly.
The only reason to plug in power is that it stops your battery draining so fast, the charger provides about 700mA charging current to the N3.
Click to expand...
Click to collapse
I've read that you need to plug into a TV but haven't had problems. But I am using a samsung mhl 1.0 with 11pin adapter. Didn't need power also. Waiting for Samsung to get on the ball so I can buy a genuine mhl 2 from them.
sent from my sm-9005.
I bought the Samsung one before it went out of stock and it works in any HDMI input also without the need to plug it to the power outlet, but I'm sure a full HD movie will drain the battery fast..
Sent from my SM-N900T using Tapatalk
I think for the price of the official one your better off just getting a wireless dongle, unless you plan to game with it.
Hi guys, here's the response from the eBay seller, "These items were purchased From Kondor Ltd who are one of the major UK Distributors of Samsung Accessories. I would be extremely surprised if they sold fake stock and risked losing there multi-million contract with Samsung over some cheap fake stock. I can only assume the item received has a manufacturing fault of some sort as this is the first problem we have encountered for this product sorry.", so as you can imagine I'm beginning to think there my be a fault with my phone if this message is to be believed, what do you guys think?
Sent from my SM-N9005 using Tapatalk
@rbiter said:
I've read that you need to plug into a TV but haven't had problems. But I am using a samsung mhl 1.0 with 11pin adapter. Didn't need power also. Waiting for Samsung to get on the ball so I can buy a genuine mhl 2 from them.
sent from my sm-9005.
Click to expand...
Click to collapse
The MHL 1.0 adapter doesn't care what it's plugged into, only the MHL 2.0 adapter has that issue.
I just bought a mhl cable through amazon. It has the USB connector for the phone on one side, and a HDMI connector on the other. Directly attached to the HDMI connector is a regular USB plug which I plugged into my power source for my phone (as this is how I understood it should work).
I don't get any messages on my phone that indicate that it is connected to my TV/Monitor and my phone also doesn't indicate that it's charging.
What I read from the product description was, that connecting this cable to my power source would also charge the phone. So could it be my phone is charging, even if the battery indicator doesn't say so? Like it would be charging just so much as that my phone doesn't drain? Or should it clearly indicate that the battery gets charged. Befor knowing this, I'm hestitant to send the cable back as defective.
Can any one advise?
Thanks
Mikegrmn said:
I just bought a mhl cable through amazon. It has the USB connector for the phone on one side, and a HDMI connector on the other. Directly attached to the HDMI connector is a regular USB plug which I plugged into my power source for my phone (as this is how I understood it should work).
I don't get any messages on my phone that indicate that it is connected to my TV/Monitor and my phone also doesn't indicate that it's charging.
What I read from the product description was, that connecting this cable to my power source would also charge the phone. So could it be my phone is charging, even if the battery indicator doesn't say so? Like it would be charging just so much as that my phone doesn't drain? Or should it clearly indicate that the battery gets charged. Befor knowing this, I'm hestitant to send the cable back as defective.
Can any one advise?
Thanks
Click to expand...
Click to collapse
The phone should indicate it is charging as it normally would.
NZtechfreak said:
The phone should indicate it is charging as it normally would.
Click to expand...
Click to collapse
Thanks. I really appreciate your straight answer
I'll be sending the cable back. I wouldn't bother too much if it wouldn't supply the full resolution and such, but I'd at least would expect some output on my TV.
Mikegrmn said:
Thanks. I really appreciate your straight answer
I'll be sending the cable back. I wouldn't bother too much if it wouldn't supply the full resolution and such, but I'd at least would expect some output on my TV.
Click to expand...
Click to collapse
You're welcome.
I love using MHL, but I really wish there weren't several varieties of MHL cables (5-pin, 11-pin, 1.0 and 2.0) and also such a large number of fakes and very low quality ones out there. Makes buying difficult, as all these threads about MHL demonstrate.
Does anyone know if you can physical see whether you have a 5 pin or 11 pin MHL 2.0?
Sent from my SM-N9005 using Tapatalk
I just bought a monitor with MHL. This came with an MHL lead Micro usb > HDMI plug so eager to try it I got nothing on the Note 3.
Testing this with my HTC Sensation the lead alone worked perfectly so I did a bit of research and figured that all I should need is a pin converter 5 - 11 pin and I should be fine.
I This
When that duly arrived, it still didn't work. What I noticed when using this though was :
1) The Samsung pops up a message "HDMI connected" when the monitor is on.
2) The monitor scans and doesn't tell me there is no signal - It sits there with a black screen when the note 3 is connected.
3) The Samsung loses it's sound (on the device) but nothing comes through on the monitor (not used the monitor speakers yet so I might no have this set up)
4) The Samsung shows that it is being charged.
Further research seems to come up with conflicting results. Some people say you MUST have one of those adaptors with external power, but others swear their adaptors work fine without it because the Note 3 is MHL 2.0 and only needs it for battery charging.
So I am a bit confused and hope some folks here can shed some light on this matter. My HTC sensation works perfectly with just the lead, I find it hard to believe the |Note 3 won't even when the pin outs are correct and the monitor is clearly supplying power to the device.
Any help appreciated, I don't want to buy an older mhl 1.0 adaptor with power or an expensive 2.0 adaptor if it's not necessary and I do want to hear from anyone that has an adaptor that doesn't require power.
I've never owned one Samsung phone, even when using an official (powered) MHL adapter, that worked well enough to even be worth having the adapter.
I don't know if the Note 3 requires it or not, but I wouldn't even bother with it tbh.
My Samsung MHL 2.0 cable does NOT require a power input with the Note 3 (I still use one anyway). AFAIK you still need a charging input if the cable is MHL 1.0, regardless of what spec the phone has.
NZtechfreak said:
My Samsung MHL 2.0 cable does NOT require a power input with the Note 3 (I still use one anyway). AFAIK you still need a charging input if the cable is MHL 1.0, regardless of what spec the phone has.
Click to expand...
Click to collapse
Thanks - I take it you are talking of the official one (which came out before the note 3)?
louiscar said:
Thanks - I take it you are talking of the official one (which came out before the note 3)?
Click to expand...
Click to collapse
Correct.
NZtechfreak said:
Correct.
Click to expand...
Click to collapse
Thanks, it's curious then why my mhl lead with 5 - 11pin adaptor doesn't work directly unless there's some magic in the Samsung unit.
I seem to be clearing the fog on this issue a little but I'm still confused.
It appears that what Samsung provide is and MHL > HDMI adaptor. HDMI and MHL are different ... in some way.
However, when a monitor supports HML directly this shouldn't be necessary at all. As my monitor came with this feature and supplied an MHL cable albeit the 5 pin my take on this is that fitting a 5 > 11 pin converter should be all that I need. Some appear to have used passive MHL cables with success :
http://forum.xda-developers.com/showthread.php?t=2483054&page=3
But I'd still like any more expert opinions on whether I'm on the right track or not. If I am then I might assume the chinese adaptor I bought is defective in some way.
I don't know what happened but I bought this one and I am surprised! http://www.ebay.com/itm/Micro-USB-O...AU_MobilePhoneAccessories&hash=item486423fdfe This was suggested in another thread from many users however it was noted that it requires power A/C to work! To my big surprise,the one that I got it works without plugging any power source and not only that but it managed to load my external usb other than hdmi
Those are my first results after 10 minutes of testing it! Didn't have any long term session with it in order to check if it is stable or errorfree!
Because I know some users may doubt it, here is a picture showing what I said !https://db.tt/Gsum0lyU
SAVVAS. said:
I don't know what happened but I bought this one and I am surprised! http://www.ebay.com/itm/Micro-USB-O...AU_MobilePhoneAccessories&hash=item486423fdfe This was suggested in another thread from many users however it was noted that it requires power A/C to work! To my big surprise,the one that I got it works without plugging any power source and not only that but it managed to load my external usb other than hdmi [/url]
Click to expand...
Click to collapse
Thanks for the heads up. Can you tell me if you were plugging this into an MHL compliant monitor or was it just one that had HDMI?
louiscar said:
Thanks for the heads up. Can you tell me if you were plugging this into an MHL compliant monitor or was it just one that had HDMI?
Click to expand...
Click to collapse
I think No as the TV is quite old and from my usage I didn't see any signs of MHL. But I will test it again in my other TV which is much newer to see if it still works without external power! I Will post my findings on this thread in the near future
It seems that it works pretty fine also in my other (newer) TV without any power source!
Edit: flip the picture as it is wrongly displayed.
SAVVAS. said:
It seems that it works pretty fine also in my other (newer) TV without any power source!
Edit: flip the picture as it is wrongly displayed.
Click to expand...
Click to collapse
Thanks , they are cheap enough so I'll probably order the same one and give it a try.
louiscar said:
Thanks , they are cheap enough so I'll probably order the same one and give it a try.
Click to expand...
Click to collapse
I hope you have the same luck as with me
Okay, I've had some trouble in the past selecting USB OTG cables. I have 4 now. One for my old Galaxy Victory that I no longer have, one for my Nexus 10 I sold, one for my PadFone X, and one for my HTC m7 that works w/ the Z3 and Shield Tab. Are USB Y cables as finicky? Does anybody reccommend a particular one?
These have been reported to work on the nvidia geforce shield tablet forums:
http://www.amazon.com/gp/product/B00EJP5XR2/ref=oh_aui_detailpage_o00_s00
http://www.amazon.com/gp/product/B009YPYORM/ref=oh_aui_detailpage_o00_s00
edit: another one that's been reported to work:
http://www.amazon.com/gp/product/B00CXAC1ZW/ref=oh_aui_detailpage_o01_s00
debunk said:
These have been reported to work on the nvidia geforce shield tablet forums:
http://www.amazon.com/gp/product/B00EJP5XR2/ref=oh_aui_detailpage_o00_s00
http://www.amazon.com/gp/product/B009YPYORM/ref=oh_aui_detailpage_o00_s00
edit: another one that's been reported to work:
http://www.amazon.com/gp/product/B00CXAC1ZW/ref=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
Sweet. Thanks!
Sent from my SHIELD Tablet using XDA Free mobile app
debunk said:
These have been reported to work on the nvidia geforce shield tablet forums:
http://www.amazon.com/gp/product/B00EJP5XR2/ref=oh_aui_detailpage_o00_s00
http://www.amazon.com/gp/product/B009YPYORM/ref=oh_aui_detailpage_o00_s00
edit: another one that's been reported to work:
http://www.amazon.com/gp/product/B00CXAC1ZW/ref=oh_aui_detailpage_o01_s00
Click to expand...
Click to collapse
Nice, I purchased both of those blind without any idea they were the right ones, I guess I will have some spares when they arrive.
I didn't even think about it too much, I've had a blessed existence when it comes to buying this stuff without any prior confirmation that it works (first S2 video on YouTube demonstrating USB OTG was mine).
would they work in combination with the ethernet adapter?
DeBoX said:
would they work in combination with the ethernet adapter?
Click to expand...
Click to collapse
They should, yes.
DeBoX said:
would they work in combination with the ethernet adapter?
Click to expand...
Click to collapse
That's specifically why Nvidia added this functionality, so that much at least should be a given.
NZtechfreak said:
That's specifically why Nvidia added this functionality, so that much at least should be a given.
Click to expand...
Click to collapse
What USB Ethernet adapters are you folks using?
Lokks said:
What USB Ethernet adapters are you folks using?
Click to expand...
Click to collapse
Pretty much anyone of those usb to ethernet adapters you find should work. I've tried with 2 of those MIC el cheapo adapters, works fine.
Thanks much appreciated
Of the ones I got, this one turned up first, works fine (although price has risen since I grabbed them).
Note that the charging input needs to be plugged in before the cable is plugged into the tablet.
I have trouble to find a store that ships those to Germany.
Amazon.de has one that looks identical, but pictures in webstores...
Also the description says it won't work simultaneously. But maybe that's just for your average phone...
HansWursT619 said:
I have trouble to find a store that ships those to Germany.
Amazon.de has one that looks identical, but pictures in webstores...
Also the description says it won't work simultaneously. But maybe that's just for your average phone...
Click to expand...
Click to collapse
It doesn't charge the tablet. Just powers the connected device to save battery . That's how OTG works.
Sent from my SHIELD Tablet using XDA Free mobile app
2.0 changelog:
USB Y-cable support
Charge your SHIELD Tablet when using Ethernet in Console Mode with a micro USB Host OTG Y Cable
Am i misreading this?
HansWursT619 said:
2.0 changelog:
USB Y-cable support
Charge your SHIELD Tablet when using Ethernet in Console Mode with a micro USB Host OTG Y Cable
Am i misreading this?
Click to expand...
Click to collapse
"Please note that the extra power goes into the peripheral device, not into the android device itself."
This is noted in the products description. I'd like to know what cable I would need to get to charge the nVidia Shield and also allow the use of a USB Ethernet adapter.
dibblebill said:
It doesn't charge the tablet. Just powers the connected device to save battery . That's how OTG works.
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
No, Nvidia's implementation charges the tablet. That is the express purpose of Nvidia's addition, to allow simultaneous charging of the tablet while streaming over ethernet.
Please bear in mind I am actually using such a cable myself, and have confirmed the tablet charges used this way.
NZtechfreak said:
No, Nvidia's implementation charges the tablet. That is the express purpose of Nvidia's addition, to allow simultaneous charging of the tablet while streaming over ethernet.
Please bear in mind I am actually using such a cable myself, and have confirmed the tablet charges used this way.
Click to expand...
Click to collapse
What cable are you using?
Do you use any otgy or a special one just for the shield?
bull1295 said:
What cable are you using?
Do you use any otgy or a special one just for the shield?
Click to expand...
Click to collapse
I linked to it at the top of this page, its just a regular USB OTG Y-cable, not specially made for the Shield.
NZtechfreak said:
I linked to it at the top of this page, its just a regular USB OTG Y-cable, not specially made for the Shield.
Click to expand...
Click to collapse
Any particular order I should be plugging it in? I don't charge using that cable
Edit: nvm I see. I got another one. *buy* Hopefully this one works. Mine doesn't.
I am a little bit confused, too.
1. Does this feature just works with Android 5 or also with 4.4.2?
2. Does this only work for ethernet adapters?
3. Does this only work in console mode? (would be strange)
I have this one from German amazon.de and tried it on 4.4.2 with a USB stick and a wireless 360 controller adapter. (non-console mode)
Either it charges the tablet or it recognizes the peripheral device, never both.
So is this a problem of the OS version, or of the used peripheral device, or of the OTG-Y cable?
I am having a nightmare trying to find any USB 3.0/ 3.1 type c to type c (at least 5gbps) cables in the UK longer than 3ft!! I have found a couple of 3 ft ones but I will be using it to charge my S8, there is no way a 3ft cable is going to reach behind my desk and down to the socket. I would also like to be able to use it as more than purely a charging cable, hence wanting 5gbps or the newer 10gbps speeds. I am amazed there isn't a single cable longer than 3ft for it other than a few old usb 2.0 ones which are useless these days (and I suspect won't even charge it at full speed).
Couple of 3ft ones, one by Belkin and one by Anker, but nothing longer (in the UK anyway). There must be a demand for them, connecting a charger will need longer than 3ft for anyone that has it on a desk, and connecting it to the back of a pc of docking station will as well!
https://www.anker.com/products/A8169091
They have a few others on there as well that are 6 ft.
rkennison said:
https://www.anker.com/products/A8169091
They have a few others on there as well that are 6 ft.
Click to expand...
Click to collapse
"Buy at Amazon US" and "USB-C to USB-A"
ewokuk said:
"Buy at Amazon US" and "USB-C to USB-A"
Click to expand...
Click to collapse
PowerLine USB-C to USB-C 2.0 (6ft / 1.8m)
https://www.anker.com/products/A8182011
pRo_lama said:
PowerLine USB-C to USB-C 2.0 (6ft / 1.8m)
https://www.anker.com/products/A8182011
Click to expand...
Click to collapse
Again, I am *NOT* in the US...and I *DONT* want USB 2.0!!
I don't see why not use 2 cables. Personally I use 2 cables simply because always having to pull the cable and do what I got to do then put it back from my desk is real bothersome. I don't know how your setup is however.
If you're looking for a cable to use with the OEM charger, the unboxing videos I've seen show the included charger with a USB A connection, so you would need a C-to-A cable. (You might already be aware, just making sure.)
Tidbits said:
I don't see why not use 2 cables. Personally I use 2 cables simply because always having to pull the cable and do what I got to do then put it back from my desk is real bothersome. I don't know how your setup is however.
Click to expand...
Click to collapse
Yeah I am using 2 cables, this is the second one. I already have a 6ft USB C to A cable so that's covered, I just want a c to c cable 6ft and at least 5gbps usb 3.0 so it is somewhat future proof (vs all the usb 2.0 versions I keep finding that are too old and slow for my needs).
datajosh said:
If you're looking for a cable to use with the OEM charger, the unboxing videos I've seen show the included charger with a USB A connection, so you would need a C-to-A cable. (You might already be aware, just making sure.)
Click to expand...
Click to collapse
Yep I have C to A already. No Idea why C to C at longer than 3ft is so hard to find, I'll just have to wait I guess.
C to C isn't all that popular currently. There are very few things out right now that require C to C.
Anker PowerLine+ USB-C to USB 3.0 cable (6ft), High Durability, for USB Type-C Devices Including the new MacBook, ChromeBook Pixel, Nexus 5X, Nexus 6P, Nokia N1 Tablet, OnePlus 2 and More https://www.amazon.co.uk/dp/B01M5GMZ6X/ref=cm_sw_r_cp_apa_X5w6ybQK9Q3MC
ewokuk said:
Are you completely ****ing brainless? How many times do I have to say IN THE UK for you to get it into your thick skull? And you haven't found *IT* because the IT that you posted was COMPLETELY THE WRONG ****ING CABLE. Jesus christ.
Click to expand...
Click to collapse
I guess you are not that bright either since you couldn't find a simple cable for yourself and resorted to ask for help.
Next time you need help on a public forum maybe it's a good idea to pretend you are not a complete douchebag.
And i completely agree with other poster, you should Google yourself. We are not your servants.
Sent from my NEM-L51 using Tapatalk
rubaiet said:
I guess you are not that bright either since you couldn't find a simple cable for yourself and resorted to ask for help.
Next time you need help on a public forum maybe it's a good idea to pretend you are not a complete douchebag.
And i completely agree with other poster, you should Google yourself. We are not your servants.
Sent from my NEM-L51 using Tapatalk
Click to expand...
Click to collapse
Both of you are acting like children. The likely reason why its so hard to find is because the manufacturers likely consider the main use-case to be phone to phone data transfer or Phone to PC charge and data. In this scenario most people would want the devices relatively close together. It just might be too early for a cable like it to be widely available. I managed to find 1 (I think) on the amazon UK site. It comes in a pack of 5 cables with varied lengths. It appears they have the cable but I don't see it in a stand-alone pack just yet.
https://www.amazon.co.uk/AUKEY-Cabl...id=1492431447&sr=8-37&keywords=usb+3.0+c+to+c
ram8704 said:
Both of you are acting like children. The likely reason why its so hard to find is because the manufacturers likely consider the main use-case to be phone to phone data transfer or Phone to PC charge and data. In this scenario most people would want the devices relatively close together. It just might be too early for a cable like it to be widely available. I managed to find 1 (I think) on the amazon UK site. It comes in a pack of 5 cables with varied lengths. It appears they have the cable but I don't see it in a stand-alone pack just yet.
https://www.amazon.co.uk/AUKEY-Cabl...id=1492431447&sr=8-37&keywords=usb+3.0+c+to+c
Click to expand...
Click to collapse
I'm not sure why you are saying I acted like a child! I was merely saying that nobody is perfect and it's not okay to insult people. He didn't swear at me, he did it to someone else. I intervened as you just did.
Anyway, I guess you just misunderstood the context.
Sent from my NEM-L51 using Tapatalk
rubaiet said:
I'm not sure why you are saying I acted like a child! I was merely saying that nobody is perfect and it's not okay to insult people. He didn't swear at me, he did it to someone else. I intervened as you just did.
Anyway, I guess you just misunderstood the context.
Sent from my NEM-L51 using Tapatalk
Click to expand...
Click to collapse
I did misunderstand. I would rather we all focus on trying to help OP and not flame each other. Figured calling it childish was the mildest way to put things.
here you go:
https://www.amazon.co.uk/AmazonBasi...rds=AmazonBasics+USB+Type-C+to+USB+Type-C+3.1
And cheaper:
https://www.amazon.co.uk/AUKEY-MacB...coding=UTF8&psc=1&refRID=CZ5W2214G82TAFF3CJQ9
dumraden said:
And cheaper:
https://www.amazon.co.uk/AUKEY-MacB...coding=UTF8&psc=1&refRID=CZ5W2214G82TAFF3CJQ9
Click to expand...
Click to collapse
I looked for this the other day and only found the 5 pack. Good job.
ram8704 said:
I looked for this the other day and only found the 5 pack. Good job.
Click to expand...
Click to collapse
I basically clicked on the 5-pack you posted and it was one of the recommended items below. :laugh:
dumraden said:
I basically clicked on the 5-pack you posted and it was one of the recommended items below. :laugh:
Click to expand...
Click to collapse
It's USB 2.0 :crying:
As a new member I can't post direct links yet but just go to Amazon's UK website and search "usb c 3.0 long" and you will tons of options. Not sure why you had such difficulty finding it.
I'm trying to connect my Tab S6 (SM-T867V) to my Logitech mouse, but as soon as I connect the OTG cable to the Tab, even before the mouse controller is insterted, I get a notification that says USB connector connected and then it switches to USB connector disconected and just keeps flipping between the two notifications every few seconds seemingly endlessly. I tried the otg cable with my Note 9 (SM-N960U) and it works perfectly fine with my mouse. The Tab and Note prompt me with charging/file transfer when the otg cable is hooked into the Note and connected to the Tab via a usb c cable so that seemed to work fine. The tab also works normally when charging and using a usb c to hdmi adapter, so I don't think it's a port issue. Both devices are on One UI 2.1 and both have USB 3.1 type C 1.0 reversible connectors, so I'm really confused as to why I'm getting this bug. If anyone has a solution, I would greatly appreciate it!
Why not use a hub like a uGreen one ?
N1NJATH3ORY said:
Why not use a hub like a uGreen one ?
Click to expand...
Click to collapse
Are those not just OTG cables with multiple outputs?
DroidBabies said:
Are those not just OTG cables with multiple outputs?
Click to expand...
Click to collapse
Lol my bad! So what makes is your OTG ?
N1NJATH3ORY said:
Lol my bad! So what makes is your OTG ?
Click to expand...
Click to collapse
No longer for sale, but it was sold by bargain depot on Amazon https://www.amazon.ca/Bargains-Depo...dp/B071FGVWQV?ref_=d6k_applink_bb_marketplace
DroidBabies said:
No longer for sale, but it was sold by bargain depot on Amazon https://www.amazon.ca/Bargains-Depo...dp/B071FGVWQV?ref_=d6k_applink_bb_marketplace
Click to expand...
Click to collapse
My Goodness that is trash! i'm suprised that it works on your Note 9! Mate purchase a uGreen or any decent USB hub! Plus make sure it's got (PD) Power Delivery port!
N1NJATH3ORY said:
My Goodness that is trash! i'm suprised that it works on your Note 9! Mate purchase a uGreen or any decent USB hub! Plus make sure it's got (PD) Power Delivery port!
Click to expand...
Click to collapse
I didn't think about PD making a difference, but maybe you're right. My usb c to hdmi does support PD, but the power wasn't plugged in when I tried it and it still worked tho ?
But either way, I ended up purchasing a bluetooth mouse instead just because it's more useful to have one for my tablet rather than unplugging my laptop's every time I take the tab somewhere. I will keep this in mind for if I need to add more accessories later, so thanks for the info.
DroidBabies said:
I didn't think about PD making a difference, but maybe you're right. My usb c to hdmi does support PD, but the power wasn't plugged in when I tried it and it still worked tho ?
But either way, I ended up purchasing a bluetooth mouse instead just because it's more useful to have one for my tablet rather than unplugging my laptop's every time I take the tab somewhere. I will keep this in mind for if I need to add more accessories later, so thanks for the info.
Click to expand...
Click to collapse
Yep i'm using a Microsoft Bluetooth Arc Bluetrack mouse + Keychron K1 Wireless Mechanical Keyboard, and a uGreen hub Awesome for out and about setup! Mate if you spend some good cash from the get go you wont have issues down the road. Well that's how i see it!