Hi, as title states, i purchased a HOX+ 64gb which did not boot, tried factory settings etc etc and always got stuck, tried finding an RUU and could not find for my version....
Anyway, been reading for 2 weeks on here and tried a few various things to get it to boot.
All failed until Android Revolution.
I put a custom recovery on, think its Team Venom Mod of TWRP
Unlocked The bootloader following instructions on here HTC Dev.
flashed boot.img extracted from AndroidRev8.0 zip (did not flash in fastboot so used a script that allows to flash from recovery on this forum)
Flashed the rom from recovery, and brilliant, the phone loads up, wifi bluetooth all work, just IMEI is unknown.
I've tried a few other roms from here, and they all do the same, only thing i have not tried is nandroid backup, but ive not read about them enough yet to trust myself in what im looking for.
I will post fastboot getvar all shortly, but at present im trying a locked bootloader with an RUU i just found while writing this....
Any suggestions for me to try??
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.40.0000
(bootloader) version-baseband: 3.1204.168A.32
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.17.401.3
(bootloader) serialno: FA2B6W102293
(bootloader) imei: IMEI does show correctly here.....
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3840mV
(bootloader) devpower: 58
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.532s
anyone can help me with this? or a link to an RUU that would restore to stock??
Related
Hi there,
I came from CM 10.1.1 by Lloir and tried to get back to Stock.
I flashed the original boot.img the stock recovery, relocked the bootloader and used every RUU exe listed in the Device essential material section.
Everytime I get the Error 140 "Bootloader Version Error".
My version-main is 1.17.401.3. The latest available RUU exe has 1.17.401.1... is this maybe why it doesn't works?
Here is my data:
fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.40.0000
(bootloader) version-baseband: 3.1204.168A.32
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.17.401.3
(bootloader) serialno: FA2AVW102321
(bootloader) imei: 353567050732099
(bootloader) product: enrc2b_u
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PM3511000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3820mV
(bootloader) devpower: 56
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
... I have read other threads where people had the same error code, but all of their solutions didn't work for me and I was dumb enough to not do a nandroid backup having STOCK RUU.
As long it doesn't work I can use CM 10.1.1... I have only to flash the right boot.img for CM for that time, so I can use the phone.
Has anyone an idea how I can solve this problem and get back to stock?
Best regards.
I recently acquired an HTC One SV from Boost mobile to try to fix. The previous owner ran a tool meant for a different phone to try to root the device. When I received it, it was stuck at the HTC splash boot screen with a message on the bottom saying that this is for development purposes only. I have tried going into the bootloader and flashing every image that I could find of boot, recovery, and radio. I found images that were supposedly stock and it still does not boot.
Suggestions say to take and flash a RUU to the device. The only official RUU for the region (OTA_K2_CL_JB_45_S_Sprint_WWE_Boost_2.06.653.5-1.11.653.1_release_3244713ijuyqp8g1s0xuaw.zip) I could find does not flash with an error #12. I then tried to find a method to turn the device to S-off but cannot find anything that can be done when not booted into ICS. Does anyone know a way to turn the phone to S-Off within just the fastboot OR does anyone have a backup that will fit my phone using CWM or TWRP as I can boot into them. I also ran into issues with links not working such as the system.img file located in http://forum.xda-developers.com/showthread.php?t=2292432
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.01.0000
(bootloader) version-baseband: 1.12.50.0115
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *********
(bootloader) imei: **********
(bootloader) product: k2_cl
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PL8011000
(bootloader) cidnum: SPCS_003
(bootloader) battery-status: good
(bootloader) battery-voltage: 4281mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
all: Done!
Thank you for the help!!!
Hello Guys
3 Days ago i started to unroot my HTC One M8 with android 4.4.1 (i think..) i want to install a nandroid Backup because i want the new android version..
so now noo nandroid backup is working for my mobile Phone, i tried thousands of twrp versions and cwm versions, and viper roms and Maximum HD and Android Revolution Roms..
nothing works, when i want to install viper for example, the handy starts but i got the failure:
installing venom tools
extracting build tools
setting permissions
set_perm: some changes failed
its the Version 2.0.0
and when i try to install the 1.7.1 Version it says unable to open ZIP.
no here are my informations:
C:\Users\Marco>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.055s
i tried nandroid 1.54.161.5
and 1.54.161.5
and a 1.12 Version nothing works..
i tried the newest version of twrp but it stucks at entering recovery..
and the newest working version i tried is twrp 2.8.02.
but how i sayed no nandroid works for me, they all failing at restoring System..
Sorry for my bad English, im from Germany and not so good in English..
Hope anybody knows how to fix this, i need my Phone..
Marco
I have a bone stock M8 on Marshmallow. It suddenly started having com.htc.contacts errors and the phone becomes unavailable. I've done multiple recoveries, resets and cache clearing. Sometimes it comes back for awhile but soon eras out. I chatted with HTC support and they suggested reloading the rom so I downloaded the AT&T version and did all the steps per the instructions and started the update. It gets stuck on the "sending" stage and never completes. Reading the forum I saw Sync Manager can be a blocker so I didn't do it through that but no go. Am I missing something? Thanks I searched but didn't find this.
I assume you actually have the AT&T version M8?
If so, RUU stuck "sending" is common. You may need to find a Win7 PC with USB 2.0, which has the best chance of compatibility.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
I've tried several zip files and RUUs with no success. I have an old ATT phone which I unlocked. I'm trying to get to Marshmellow.
Any help would be appreciated.
It looks like this:
c:\Users\Dan\Downloads>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.28.502.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: deleted
(bootloader) imei: deleted
(bootloader) imei2: Not Support
(bootloader) meid: deleted
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 7f8e91a3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
The correct RUUs are in my Index thread, under the "RUU" section: https://forum.xda-developers.com/showthread.php?t=2751432
Take note of the red text, since you are updating to MM, you will need to flash MM firmware.zip in fastbootRUU mode, before the RUU will install properly.
If the bootloader is unlocked, you will also need to relock it to RUU, with command: fastboot oem lock
daneboy55 said:
I've tried several zip files and RUUs with no success.
Click to expand...
Click to collapse
For this statement to be useful in any way, we need specific details. If you don't list the file names or version numbers of the zip files or RUUs, then we have no idea what you tried. Also, you should list error messages or other specific results instead of just saying 'no success". The error messages will usually tell you why it failed. May or may not be AT&T RUUs, may have failed due to unlocked bootloader, etc.
Also don't know what you mean "several zip files". Are they zip format RUUs, or something else?
I got TWRP running. I then found a zip file using my cidnum. It is SkyDragon-M8ul-M8vzw-EYEul_v1.6.0_MM.zip. It failed the zip file check, but I installed anyway. It seems to be working fine thus far. Thanks for your response.