i have downloaded several drivers, all are .inf format for Win764BIT because i am under Win864BIT .. but when i am trying to install the driver via device manager it says the drivers are not digitally signed .. and when i try using SP Flash Tool to test to flash stock rom to my currently working device .. it does not start, so i think it is not detected .. please help .. i am using a PH Version of CUBOT C11 (MT 6572) Device .. i can't try to make it work .. please help
xlSKYFiRElx said:
i have downloaded several drivers, all are .inf format for Win764BIT because i am under Win864BIT .. but when i am trying to install the driver via device manager it says the drivers are not digitally signed .. and when i try using SP Flash Tool to test to flash stock rom to my currently working device .. it does not start, so i think it is not detected .. please help .. i am using a PH Version of CUBOT C11 (MT 6572) Device .. i can't try to make it work .. please help
Click to expand...
Click to collapse
Install the drivers.. Digital signing is not required by into test mode and try
Regards
MasterAwesome
MasterAwesome said:
Install the drivers.. Digital signing is not required by into test mode and try
Regards
MasterAwesome
Click to expand...
Click to collapse
yes, but the problem is it wont install .. it keeps saying that the driver is not digitally signed or so and thus not installed
xlSKYFiRElx said:
yes, but the problem is it wont install .. it keeps saying that the driver is not digitally signed or so and thus not installed
Click to expand...
Click to collapse
As I said earlier for installing non signed drivers you need to use what is called as test mode
This can me enabled by starting the cmd with admin rights then type
Code:
bcdedit -set TESTSIGNING ON
Regards
MasterAwesome
MasterAwesome said:
As I said earlier for installing non signed drivers you need to use what is called as test mode
This can me enabled by starting the cmd with admin rights then type
Code:
bcdedit -set TESTSIGNING ON
Regards
MasterAwesome
Click to expand...
Click to collapse
i rebooted my PC and i see that test mode is inabled, i tried some .inf and still says they are not digitally signed ,, but when i tried another version of the .inf which is a different one .. it installed .. but returned Code 10 errors ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xlSKYFiRElx said:
i rebooted my PC and i see that test mode is inabled, i tried some .inf and still says they are not digitally signed ,, but when i tried another version of the .inf which is a different one .. it installed .. but returned Code 10 errors ?
Click to expand...
Click to collapse
you're not allowed to install the .inf files directly instead you will have to click the device name then click upadate drivers followed by the path to the inf folder
MasterAwesome said:
you're not allowed to install the .inf files directly instead you will have to click the device name then click upadate drivers followed by the path to the inf folder
Click to expand...
Click to collapse
what if the device is not showing in the device manager ?? .. or should i click these icons with yellow triangles instead ?
also this appears whenever i connect my phone to my PC
[/IMG]
the YunOS one on the bottom
xlSKYFiRElx said:
also this appears whenever i connect my phone to my PC
[/IMG]
the YunOS one on the bottom
Click to expand...
Click to collapse
Disconnect your device remove battery reconnect without battery you'll see it then
Regards
MasterAwesome
MasterAwesome said:
Disconnect your device remove battery reconnect without battery you'll see it then
Regards
MasterAwesome
Click to expand...
Click to collapse
ok so now i am seeing this PreLoader USB VCOM Port .. but for less than a second ..
the sound of a usb connected plays, then followed by usb disconnected sound .. if you know what i mean ..
it keeps reconnecting and reconnecting itself .. my phone is placed on a flat surface and the cable is connected at the rear of my CPU
xlSKYFiRElx said:
ok so now i am seeing this PreLoader USB VCOM Port .. but for less than a second ..
the sound of a usb connected plays, then followed by usb disconnected sound .. if you know what i mean ..
it keeps reconnecting and reconnecting itself .. my phone is placed on a flat surface and the cable is connected at the rear of my CPU
Click to expand...
Click to collapse
Now flash with sp flash tools
Regards
MasterAwesome
MasterAwesome said:
Now flash with sp flash tools
Regards
MasterAwesome
Click to expand...
Click to collapse
how ? my phones disconnects itself every second .. i dont know why
----------------------------- edit -----------------------------
ok so i tried flashing my phone with SP Flash tool, it flashed and it even showed the Green Circle thinggy at the end with a title "Download OK" .. but when i booted my phone, it says "Upgrading Android Apps" i was expecting it would be reverted to stock rom with no apps installed. but to my surprise its like nothing happened, my wallpaper is still there, all apps are still there, the settings, and configs and everything
----------------------------- edit -----------------------------
wait, my font was reverted to the stock fonts .. i used to have custom fonts .. does that mean the flash worked ?
xlSKYFiRElx said:
how ? my phones disconnects itself every second .. i dont know why
----------------------------- edit -----------------------------
ok so i tried flashing my phone with SP Flash tool, it flashed and it even showed the Green Circle thinggy at the end with a title "Download OK" .. but when i booted my phone, it says "Upgrading Android Apps" i was expecting it would be reverted to stock rom with no apps installed. but to my surprise its like nothing happened, my wallpaper is still there, all apps are still there, the settings, and configs and everything
----------------------------- edit -----------------------------
wait, my font was reverted to the stock fonts .. i used to have custom fonts .. does that mean the flash worked ?
Click to expand...
Click to collapse
Yes, it worked :good:
i see
MasterAwesome said:
Yes, it worked :good:
Click to expand...
Click to collapse
i see, thanks .. i can use this incase my phone gets bricked right ? .. but im still confused why my apps is still there after flashing ?? .. literally all of them
xlSKYFiRElx said:
i see, thanks .. i can use this incase my phone gets bricked right ? .. but im still confused why my apps is still there after flashing ?? .. literally all of them
Click to expand...
Click to collapse
Thats weird you're supposed to click firmware upgrade and not download
MasterAwesome said:
Thats weird you're supposed to click firmware upgrade and not download
Click to expand...
Click to collapse
oh ?. i though it was the "Download" which was to be pressed when flashing. thanks .. thanks sir, will try again later. when i get home
you truly helped me alot i owe you hehe .. i pressed thanks a couple of times as a sign of respect
------------------------------------------------------------- edit -------------------------------------------------------------
i tried the Firmware -> Upgrade button, but it tells me that all fields must be checked, but the cache file is missing, i never had a backup of it when i backup-ed my rom with droid tools :/ .. how can i fix this ? thanks
MasterAwesome said:
Thats weird you're supposed to click firmware upgrade and not download
Click to expand...
Click to collapse
I have a same trouble, you say to continue flashing, but I'm in read back mode, actually it can't perform read back because the driver same as xlSKYFiRElx, the driver keeps disconnecting, I tried to changed usb port, but nothing works
please help me.......
xlSKYFiRElx said:
oh ?. i though it was the "Download" which was to be pressed when flashing. thanks .. thanks sir, will try again later. when i get home
you truly helped me alot i owe you hehe .. i pressed thanks a couple of times as a sign of respect
------------------------------------------------------------- edit -------------------------------------------------------------
i tried the Firmware -> Upgrade button, but it tells me that all fields must be checked, but the cache file is missing, i never had a backup of it when i backup-ed my rom with droid tools :/ .. how can i fix this ? thanks
Click to expand...
Click to collapse
Create an empty image cache.img. Usually cache doesn't stop the boot of the device so using some other phone's cache.img or make one yourself...
Regards.
Sent from my XT1033 using XDA Free mobile app
Related
Hi, together.
I have a snopow m8 ( it's a device with mtk6589 ). I've tried to port Star N9500's rom ( miui v5 4.5.9 ). It's all ok, unless a little problem. In this device there are three buttons: SOS, PTT and Torch. Now, the device not detected these buttons. I replaced the usr folder but nothing. Thanks a lot. I entrust to you.
PS: sorry for my english.
Hi
What recovery tool did you use to backup your stock ROM and install new one? CWM? Can you please upload file?
What tutorial have you followed to adapt MIUI?
I want to experiment with this phone too. I have 20140405 ROM and it has TONS of issues - from broken OTA updated, crappy GPS EPO servers, not working YouTube, NFC doing kernel stack errors to frequent self restarts. I saw that 20140624 is available on www*needrom*com/mobile/snopow-m8 but MIUI also looks interesting,
Hi
bbkr said:
Hi
What recovery tool did you use to backup your stock ROM and install new one? CWM? Can you please upload file?
What tutorial have you followed to adapt MIUI?
I want to experiment with this phone too. I have 20140405 ROM and it has TONS of issues - from broken OTA updated, crappy GPS EPO servers, not working YouTube, NFC doing kernel stack errors to frequent self restarts. I saw that 20140624 is available on www*needrom*com/mobile/snopow-m8 but MIUI also looks interesting,
Click to expand...
Click to collapse
I use to backup my stock rom with mtk-tool and install cwm 5.x.x . I install the miui 4.5.9. I' m porting this n9500's rom to snopow m8. It's all ok, but I miss three function button. Tomorrow , maybe, they send me the snopow's stock rom. I uploaded the file soon as soon.
I use this guide: en*miui*com/thread-13383-1-1*html
SoloFirenze said:
I use to backup my stock rom with mtk-tool and install cwm 5.x.x .
Click to expand...
Click to collapse
I have to try MTK Droid tools (windows only... yuck!). I've tried to install CWM using ADB, but this phone cannot reboot into bootloader for some reasons.
SoloFirenze said:
Tomorrow , maybe, they send me the snopow's stock rom.
Click to expand...
Click to collapse
I've linked stock rom in my previous post.
SoloFirenze said:
but I miss three function button.
Click to expand...
Click to collapse
I think you should first debug if: those buttons do not send events OR events are not associated with any action/application. In ADB shell run...
Code:
getevent -lt /dev/input/event0
...and press flashlight button. On stock ROM system reports received event:
Code:
[1405204621.434233] EV_KEY 00fc DOWN
[1405204621.434242] EV_SYN SYN_REPORT 00000000
[1405204621.583587] EV_KEY 00fc UP
[1405204621.583590] EV_SYN SYN_REPORT 00000000
Now if you have the same result in MIUI then pressed key is recognised but system doesn't know what to do with it. In that case simply use tool such as http://forum.xda-developers.com/showthread.php?t=850464 to associate hardware key event with app.
SoloFirenze said:
Hi, together.
I have a snopow m8 ( it's a device with mtk6589 ). I've tried to port Star N9500's rom ( miui v5 4.5.9 ). It's all ok, unless a little problem. In this device there are three buttons: SOS, PTT and Torch. Now, the device not detected these buttons. I replaced the usr folder but nothing. Thanks a lot. I entrust to you.
PS: sorry for my english.
Click to expand...
Click to collapse
Hi, i've got a snopow M8 too. How did you port Star N9500's rom on the snopow? Did solve the google play service problem?
Thanks for help.
ludobillou said:
Did solve the google play service problem?
Click to expand...
Click to collapse
I gave up on YouTube app - no one knows how to get it working...
I removed whole app and I'm watching YT through Opera - works perfectly.
The phone is totally not worth the price. The amount of software bugs - broken OTA, broken NFC, Google apps problems, frequent restarts, NVRAM issues, EPO fails, and so on - is incredible.
BTW: Which ROM version do you have?
I've tried to port the rom MIUI for Star N9500 and my Snopow is totally brick now... When the touch interface installation of MIUI appeared, it ask me too choose my screen drivers. I select all because i didn't knew anyone choose. After a successful installation, i wiped the cache and reboot. Now i don't see anything but many horizontal stripes... And there's no more recovery. help :crying:
I think the solution is to download original rom from SP flash tool but the phone is not recognize by my computer, even with the USB VCOM drivers.
What do you think?
ludobillou said:
I've tried to port the rom MIUI for Star N9500 and my Snopow is totally brick now...
Click to expand...
Click to collapse
Try entering META mode - http://forum.xda-developers.com/showthread.php?t=1943442
Your device should be then visible for USB VCOM.
I'm not expert in unbricking so if you have any questions please ask there. But also please come back here later and share your experience.
bbkr said:
Try entering META mode - http://forum.xda-developers.com/showthread.php?t=1943442
Your device should be then visible for USB VCOM.
I'm not expert in unbricking so if you have any questions please ask there. But also please come back here later and share your experience.
Click to expand...
Click to collapse
Thanks for answer. I try the META mode, it work on my HERO h2000+ but not on my Snopow (~50% battery, volume up/down pressed when connect...etc). Does it come from the USB cable or the phone?
Thanks for help.
ludobillou said:
Thanks for answer. I try the META mode, it work on my HERO h2000+ but not on my Snopow.
Click to expand...
Click to collapse
I think this is called "Factory mode" on Snopow.
Turn off the phone. Unplug USB cable.
Press and hold volume down.
Press and hold power.
Do NOT release both buttons until Factory Mode appears. Its bunch of chinese letters, should look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect USB cable. Check if VCOM driver detects device.
Yes but...
bbkr said:
I think this is called "Factory mode" on Snopow.
Turn off the phone. Unplug USB cable.
Press and hold volume down.
Press and hold power.
Do NOT release both buttons until Factory Mode appears. Its bunch of chinese letters, should look like this:
Connect USB cable. Check if VCOM driver detects device.
Click to expand...
Click to collapse
The Factory mode worked before i brick it but not now. I will try with OTG cable and i'll tell you what will happen.
Sorry for the delay. I've installed the miui 4.7.5 and all work, unless the three hard button. I'm going crazy!! Can someone help me? I don't know how to do this!! Help me!! please! I will upload the rom.
SoloFirenze said:
Sorry for the delay. I've installed the miui 4.7.5 and all work, unless the three hard button. I'm going crazy!! Can someone help me? I don't know how to do this!! Help me!! please! I will upload the rom.
Click to expand...
Click to collapse
Check my post above. I've written you how to debug it.
bbkr said:
Check my post above. I've written you how to debug it.
Click to expand...
Click to collapse
Sorry I didn't see this. How to do this?
SoloFirenze said:
Sorry I didn't see this. How to do this?
Click to expand...
Click to collapse
Well, reading my previous post about tracking events using ADB and following those instructions seems reasonable
You have to diagnose issue first to figure out how to fix it.
bbkr said:
Well, reading my previous post about tracking events using ADB and following those instructions seems reasonable
You have to diagnose issue first to figure out how to fix it.
Click to expand...
Click to collapse
this is "my" result. The hard keys not working.
www*mediafire*com/download/dxn0db63b2mcnud/miui_4*7*5*zip
SoloFirenze said:
this is "my" result. The hard keys not working.
www*mediafire*com/download/dxn0db63b2mcnud/miui_4*7*5*zip
Click to expand...
Click to collapse
And what is the result of events debugging?
my result is this:
adb shell -- getvent -lt /dev/input/event0
/system/bin/sh: /system/bin/sh: --: unknown option
SoloFirenze said:
my result is this:
adb shell -- getvent -lt /dev/input/event0
/system/bin/sh: /system/bin/sh: --: unknown option
Click to expand...
Click to collapse
Run "adb shell" first, wait for prompt.
And then "getvent -lt /dev/input/event0".
And press some phone buttons.
bbkr said:
Run "adb shell" first, wait for prompt.
And then "getvent -lt /dev/input/event0".
And press some phone buttons.
Click to expand...
Click to collapse
yes I've the same result. Now? Witch app I use for to do this?
I tried to flash latest rom from Asus website to my new Zenfone C because it had a weird issue, it came the user interface in taiwanesse, but when trying to change to english, it stayed in taiwanesse, so I wasnt able to setup it in first place.
Then, it came to my mind to flash the latest rom, and I used this guide in absence of a Zenfone C guide for flashing:
http://en.zenfoneasus.com/zenfone-recovering-returning-stock-rom-downgrade-clean-update-guide/
I did all the steps listed there first, and then tried the steps but with the red marked steps, flashing the dnx and ifwi also, no result.
The problem is that now im stuck in a bootloop, and cant advance from there, the Asus logo stays there forever.
What happened during flashing is this:
When I sideloaded the update.zip containing latest rom from Asus website, it said:
-Installing update
-Device image SKU: ww
OTA image SKU: WW
and suddenly after that it restarted, showed a huge Intel Inside logo that I never saw and then went to the dead android image. After waiting a while, the phone restarts, this time only showing the Asus logo with the Intel Inside logo beneath it (not the Intel Inside logo only that I mentioned earlier), and stays there forever.
I dont know what else to do, I dont know if Im doing something wrong.
Were you ever able to fix the problem?
No, until now, no
Sent from my Nexus 5 using Tapatalk
Solved!!!
Hey Spartan!
I was searching online about nexus 5 to buy one but I found something else randomly in an Indonesian blog and was able fix my phone! Hardly took about 15 minutes
I will be posting the solution soon... I hope you are still in need?
kkdevta said:
Hey Spartan!
I was searching online about nexus 5 to buy one but I found something else randomly in an Indonesian blog and was able fix my phone! Hardly took about 15 minutes
I will be posting the solution soon... I hope you are still in need?
Click to expand...
Click to collapse
I still need the fix man, I will really appreciate the posting of the solution! thanks in advance!
Sent from my Nexus 5 using Tapatalk
The Fix!
First Download: -
USB Drivers: http://www.asus.com/in/Phones/ZenFone_C_ZC451CG/HelpDesk_Download/
Asus Flash Tool v1.0.0.11: https://drive.google.com/file/d/0B7cZB2l2IKlKMENKUWlVaHJ3ZHM/view
Signed Rom zip image: https://drive.google.com/file/d/0B__oiYlSY-brdHFWMy1OWXNrajg/view
The Process: -
Get your phone to boot into fastboot mode by pressing [vol -] button and power button simultaneously for few seconds.
Connect to your PC and install USB drivers if not done already. The phone should show up as an "ASUS Android Composite ADB Interface" in the Device Manager.
Now, open ASUS Flash Tool :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It should detect your phone with serial number and blue orb in front of it.
Select your phone model i.e. ZC451CG
Choose if you want to wipe data or not. I chose "Wipe Data" since I had everything backedup on asus web storage.
Click that box icon and browse for the signed zip image file you downloaded earlier.
Select your device on the ASUS flash Tool by clicking on the serial number like shown in the picture below.
( It had me scratch my head after one failed attempt because I didn't select it the first time! :silly
Click on the green start button, be patient, stay calm and cross your fingers. This could take 10-20minutes or so.:fingers-crossed:
If everything went well your phone should bootup to the welcome screen like the day 1 you got it.
Now, the zip image is quite old so after the initial setup the phone would prompt you with lots of system and app updates. Go with it and enjoy! :victory:
Lastly, don't be shy of pressing that " :good:Thanks! " button if this post helped you.
Thanks man, I will try tonight. Do you know if this works under Windows 8.1 64bits??. I see the screenshots are from windows 7.
Spartan Legionnaire said:
Thanks man, I will try tonight. Do you know if this works under Windows 8.1 64bits??. I see the screenshots are from windows 7.
Click to expand...
Click to collapse
Hopefully it should, I did it on a Windows 7 Professional 64 bit machine.
The USB drivers you download has Windows 8 drivers in it. I think that's all that is needed.
Yeah, I will try it then, and report back, thanks again.
Sent from my Nexus 5 using Tapatalk
kkdevta said:
First Download: -
USB Drivers: http://www.asus.com/in/Phones/ZenFone_C_ZC451CG/HelpDesk_Download/
Asus Flash Tool v1.0.0.11: https://drive.google.com/file/d/0B7cZB2l2IKlKMENKUWlVaHJ3ZHM/view
Signed Rom zip image: https://drive.google.com/file/d/0B__oiYlSY-brdHFWMy1OWXNrajg/view
The Process: -
Get your phone to boot into fastboot mode by pressing [vol -] button and power button simultaneously for few seconds.
Connect to your PC and install USB drivers if not done already. The phone should show up as an "ASUS Android Composite ADB Interface" in the Device Manager.
Now, open ASUS Flash Tool :-
It should detect your phone with serial number and blue orb in front of it.
Select your phone model i.e. ZC451CG
Choose if you want to wipe data or not. I chose "Wipe Data" since I had everything backedup on asus web storage.
Click that box icon and browse for the signed zip image file you downloaded earlier.
Select your device on the ASUS flash Tool by clicking on the serial number like shown in the picture below.
( It had me scratch my head after one failed attempt because I didn't select it the first time! :silly
Click on the green start button, be patient, stay calm and cross your fingers. This could take 10-20minutes or so.:fingers-crossed:
If everything went well your phone should bootup to the welcome screen like the day 1 you got it.
Now, the zip image is quite old so after the initial setup the phone would prompt you with lots of system and app updates. Go with it and enjoy! :victory:
Lastly, don't be shy of pressing that " :good:Thanks! " button if this post helped you.
Click to expand...
Click to collapse
IT WORKEEEED!!!! I dont know how to thank you man!. Thank you so much, I was going to give up on this device!. Its working really well.
The only thing I came into trouble, was to install the USB drivers included in the Asus Flash Tool. I did the following (on Windows 8.1 64bits):
I disabled driver signature check first on windows.
I went to the USB drivers folder inside the ASUS Flash tool folder on Program Files.
I went here C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller\devcon\x64
On that folder, there is a program called devcon.exe, right click on it, and select properties.
On compatibility tab select Run as Administrator, click ok.
After this, reinstall USB drivers by going to C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller and here execute install_drivers.bat
Thats it, the phone now should be recognized by the Asus Flash Tool.
I always failed when downloading Signed Rom zip image.. Someone please provide mirror... Thanks
Tjecing said:
I always failed when downloading Signed Rom zip image.. Someone please provide mirror... Thanks
Click to expand...
Click to collapse
Use a download manager like "free download manager" or something. I am on a slow network to re-upload it else where.
kkdevta said:
Use a download manager like "free download manager" or something. I am on a slow network to re-upload it else where.
Click to expand...
Click to collapse
I don't know how to thank You.. But thanks a lot you safe my days..
Can any one plz give me the link of any custom recovery for asus zenfone c.....i badly need it plz help me...thnks in advance.....plz give me..and tell me how to flash it.....
do you know where i can find the correct .raw file for asus zenfone 5 A501CG ? i use lollipop, i dont know if that's matter =s
Anyone help me When I press volume- and power, it can't enter to fastboot. And when I plug the cable, the flash tool can't detect it
Sent from my Mi 4i using XDA Free mobile app
hello brother...can you help me...
my zenfone 5 a500cg has been softrick and bootloop to...
if i'm turn on my phone
logo asus and then usb logo and then dead again...
i can't log into fastboot(power on+vol up)..
but i can log into cwm philz...
i try flash via adb sideload but always error bla bla bla tmp/updated.zip
if i try other ROM always like this ( please upgrade to image 4.3 first)
i try xftsk but always windriver error( i am use notebook win7)
i try asus flashtool with .raw zip rom but my serial number error just 12345678abcdef...
if i click start always device not detect...
help me bro
disappear3896 said:
Anyone help me When I press volume- and power, it can't enter to fastboot. And when I plug the cable, the flash tool can't detect it
Click to expand...
Click to collapse
power and volume up (+)
Spartan Legionnaire said:
IT WORKEEEED!!!! I dont know how to thank you man!. Thank you so much, I was going to give up on this device!. Its working really well.
The only thing I came into trouble, was to install the USB drivers included in the Asus Flash Tool. I did the following (on Windows 8.1 64bits):
I disabled driver signature check first on windows.
I went to the USB drivers folder inside the ASUS Flash tool folder on Program Files.
I went here C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller\devcon\x64
On that folder, there is a program called devcon.exe, right click on it, and select properties.
On compatibility tab select Run as Administrator, click ok.
After this, reinstall USB drivers by going to C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller and here execute install_drivers.bat
Thats it, the phone now should be recognized by the Asus Flash Tool.
Click to expand...
Click to collapse
First and foremost, follow Spartan about how to deal with the driver install error. Read above. Second, those are the links for the raw images:
ww_A500CG_3.23.40.60_20150630.raw and many other phones. It was posted by thanhthuy. 500CG Lollipop: https://mega.nz/#!jwBDUKzJ!x3VD9VJrMe0CBs353DVnXlHr2dHQXepjcqtrR0gQDdU
500CG kitkat:
https://mega.co.nz/#!H8YkyLba!4Ye52JKAjzogGRVvCx2r9XoJIhou_uY3z6YH1xBges8
400CG 6.6.3 - https://mega.co.nz/#!HoRRnLCL!CV-iCMEUgRd_LwDc4QgNkevxKIGOKtFGDYrytt59EVE
400CG 7.3.3 - https://mega.co.nz/#!G8hRwYqR!Eu_l6r_6QSbhjID-MtYQU3v0q0voQ0GYkFeayy-3MFI
451CG: https://mega.co.nz/#!794U1TpT!rermqclZOpPKcYZY8z2YezUkQE-MWjYJgqyKMUAjYDo
600cg Kitkat: https://mega.co.nz/#!S1wlnYhC!doCPvf7ukeEFStcJPgqaEViE5oiHb_hpGSGnIh3n1IQ
Here for 600cg lollipop: https://mega.co.nz/#!3p4wBQAY!KUx26zaGdCBU6CGa4g68zT_iX9NxmIQCUvHiolfa_Oo
ZE550ML Lollipop 40.23 : https://mega.co.nz/#!HgBSySZA!EOxpsmPvHgCfl-9jUVRAv624Uq9LG4uvxuN83j6-P-k
ZE550ML Lollipop 40.40: https://mega.co.nz/#!P4RmXIwb!-xrDe8AYXdprZgUG4Ehs8fLNHhrdKpXdmaV3FBWPC_0
ZE551ML Lollipop: https://mega.co.nz/#!i4JRAQDR!9DzxtSd1oxDuCV6oc0rEhm-1sF4SA-94YPG9fLVw_lw
Source using Google cache (Vietnamese): http://webcache.googleusercontent.com/search?q=cache:w5AS-N1JrAoJ:zenphoneviet.com/threads/all-zen-stock-rom-firmware-kk-l-update-hang-tuan-chay-bang-asus-flash-tool.7066/+&cd=1
---------- Post added at 07:31 AM ---------- Previous post was at 07:29 AM ----------
Those raw files are extremely difficult to find so if you pretend to have any of those phones i recommend to download. It works easily if you have fastboot. If you only have adb i did not saw working but i am trying.
---------- Post added at 07:38 AM ---------- Previous post was at 07:31 AM ----------
If you try to do that under adb they give a serial number mistake.
4 days trying to solve this bootloop using adb. At least one person here saved his phone with the raw links i found using google webcache in this vietnamese link so it was worth it. Looks like i will need to lose 40 days sending to Asus in Sao Paulo. What a hell folks, those asus firmwares are really crap. Set a great hardware for set poor software.
why my phone does not give any reaction when press power button+vol
I had same problem but different situation....I tried to make an experiment by changing systemui and I had done it with a wrong step .lucky I make a backup and tried to recover it.
But Things get worst when it failed to backupbang now my phone get stuck to Asus logo.I tried to follow the method that your all give in this thread but I can go to fastbootode with it must press power button+col down button.
CAN ANYBODY HELP ME WITH THIS PROBLEM
Sorry for my bad English
And I'm a newbie and try to learn something from pro
Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
jagoda1 said:
Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
Click to expand...
Click to collapse
Your phone is not hard bricked.
Hard brick means that your motherboard is faulty.
Your phone is soft bricked. You can try to reflash, the same procedure, but when you connect the phone press the small red button for 20 secconds.
If its not working, try to reinstall the drivers.
Try and see what is going on!
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
teXew said:
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
Click to expand...
Click to collapse
Hi. To do a good job you must tell us what firmware do you want to install: KitKat(Android 4.4.2) or JellyBean(Android 4.2.2).
After that you must know what kind of firmware Stock or Custom.
Or... do you want to start your phone again.
I need one picture of your phone box with stickers on it! There you will see when your phone is made.
This are 2 kinds of phones: made after 03.2014 or before 03.2014.
For those made after 03.2014 you must use a diferent preloader.
I think this is what happent to your phone.
Flash procedure is the same but you must change the preloader.
Here is a link with one preloader and one good firmware.
Link: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
This firmware is KitKat, based on CN firmware. It have GAPPS and is ROOTED.
Here is what i use: http://forum.xda-developers.com/lenovo-p780/development/miui-lenovo-p780-t2976347
Good firmware too. It have custom recovery TWRP and GAPPS. ROOTED too. It is KITKAT.
Hope this helps you.
Good Luck.
Tnx for fast respond ...here is pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone year is 2013 ... i thought that my phone is ROW so i flash ROW rom(from this thread link) ...maybe that cause phone brick?
Sent from 1+1
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
jagoda1 said:
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
Click to expand...
Click to collapse
Use SP Flash v5 from this link.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
teXew said:
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
Click to expand...
Click to collapse
Baseband must be flashed from custom recovery like TWRP or CWM.
For flashng firmware check the drivers... what windows do you use ?
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
teXew said:
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
Click to expand...
Click to collapse
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
@stympy who ever are you thank you for helping us. You're a great person.
jagoda1 said:
@stympy who ever are you thank you for helping us. You're a great person.
Click to expand...
Click to collapse
You are wellcome!
If you have problems do not hesitate to ask!
Good Luck.
stympy said:
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
Click to expand...
Click to collapse
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
teXew said:
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
Click to expand...
Click to collapse
So... I think your phone is in some kind of bootloop.
Try to change your phone for at least 3 hours. Try again after.
Sent from my P780 using XDA-Developers mobile app
@stympy, i read on some Chinese forum that after formatting device(using FlashT) is possible to flash preloader.. but it is risky ... What do u think?
Or what about this methode: https://youtu.be/A3TmXtOA0IA :/
EDIT: Nahh i can't format, same error -.-'
Sent from 1+1
So basically my display+digitizer broke and went on for search of a new one. Got 2 brand new screen (i thought first one was not working), installed it but only the buttons show up and there is a black and bright screen coming on and off.
Tried charging it, power + buttom to try to force shut down. Disconnected the power cable from battery to turn off completely and nothing works. I think the phone is gone, any ideas?
jemser said:
So basically my display+digitizer broke and went on for search of a new one. Got 2 brand new screen (i thought first one was not working), installed it but only the buttons show up and there is a black and bright screen coming on and off.
Tried charging it, power + buttom to try to force shut down. Disconnected the power cable from battery to turn off completely and nothing works. I think the phone is gone, any ideas?
Click to expand...
Click to collapse
Heyyo, hmm have you tried rebooting to bootloader/fastboot? Power with vol down? If that works then try to download TWRP on a PC and then via PC using USB try... Fastboot boot TWRP.img to wipe system, Dalvik, cache and data.. then flash new ROM and gapps
ThE_MarD said:
Heyyo, hmm have you tried rebooting to bootloader/fastboot? Power with vol down? If that works then try to download TWRP on a PC and then via PC using USB try... Fastboot boot TWRP.img to wipe system, Dalvik, cache and data.. then flash new ROM and gapps
Click to expand...
Click to collapse
Still getting the black and bright screen, before any of this happened i had already rooted my phone as i installed a different ROM
jemser said:
Still getting the black and bright screen, before any of this happened i had already rooted my phone as i installed a different ROM
Click to expand...
Click to collapse
Hmm when you plug it into your PC when the device is powered on does it show up as a qualcomm driver device in device manager? If so this unbrick guide could help
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
ThE_MarD said:
Hmm when you plug it into your PC when the device is powered on does it show up as a qualcomm driver device in device manager? If so this unbrick guide could help
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Unfortunately it shows as Le Max 2
jemser said:
Unfortunately it shows as Le Max 2
Click to expand...
Click to collapse
Hmm ok one more thing to try is this guide about forcing the phone into emergency download mode and then use flashone to reflash everything to EUI ROM
https://forum.xda-developers.com/le-max-2/how-to/le-max-2-remove-vendor-rom-install-eui-t3614193
ThE_MarD said:
Hmm ok one more thing to try is this guide about forcing the phone into emergency download mode and then use flashone to reflash everything to EUI ROM
https://forum.xda-developers.com/le-max-2/how-to/le-max-2-remove-vendor-rom-install-eui-t3614193
Click to expand...
Click to collapse
I was unable to finish the process always getting:
" 23:10:40: ERROR: function: main:259 Could not connect to \\.\COM3
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download"
I guess i am having problems getting it to EDL mode since i cannot see anything on the screen. Wouldnt be any problem in hardware? since the screen broke cause i dropped it.
Im losing my hopes ;(
jemser said:
I was unable to finish the process always getting:
" 23:10:40: ERROR: function: main:259 Could not connect to \\.\COM3
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download"
I guess i am having problems getting it to EDL mode since i cannot see anything on the screen. Wouldnt be any problem in hardware? since the screen broke cause i dropped it.
Im losing my hopes ;(
Click to expand...
Click to collapse
Hmm but your new screens came with a replacement cable right? Mine did when I cracked mine same with the capacitive keys and now the screen and the capacitive keys work well again
Your original cracked screen, have you tried plugging it in to see if it works?
Just to double check when you're replacing the screens is the device powered off?
ThE_MarD said:
Hmm but your new screens came with a replacement cable right? Mine did when I cracked mine same with the capacitive keys and now the screen and the capacitive keys work well again
Your original cracked screen, have you tried plugging it in to see if it works?
Just to double check when you're replacing the screens is the device powered off?
Click to expand...
Click to collapse
yeh i tried with it powered off and no good.
The old screen is all cracked up and cannot see anything, even though I see the same behavior black bright screen
i think i know why is failing, the driver did not installed and have not been able to install it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and now it shows as a portable device > Le max 2 in device manager again
Update:
Ok so when the device is turned on normally shows as Le Max 2, once i tried vol + - and power, i guess it goes to EDL mode.
Onces on EDL then the proper driver tries to install and on device manager shows as QUSB_BULK while trying
Then the installation fails and again shows as QUALCOMM port 3 but with an exclamation mark that has not been installed properly.
I guess this is the main reason the flash does not work.
jemser said:
i think i know why is failing, the driver did not installed and have not been able to install it.
and now it shows as a portable device > Le max 2 in device manager again
Update:
Ok so when the device is turned on normally shows as Le Max 2, once i tried vol + - and power, i guess it goes to EDL mode.
Onces on EDL then the proper driver tries to install and on device manager shows as QUSB_BULK while trying
Then the installation fails and again shows as QUALCOMM port 3 but with an exclamation mark that has not been installed properly.
I guess this is the main reason the flash does not work.
Click to expand...
Click to collapse
Hmm by chance are you able to try and manually install the driver via device manager?
ThE_MarD said:
Hmm by chance are you able to try and manually install the driver via device manager?
Click to expand...
Click to collapse
Unfortunately I tried and no error as I am getting the driver is up to date.... I am not sure what else can i try
jemser said:
Unfortunately I tried and no error as I am getting the driver is up to date.... I am not sure what else can i try
Click to expand...
Click to collapse
Derp! After checking it out? I think those drivers from that forum link I sent you are out of date sorry... They seem to cause issues for Windows 10 users. :\
This guide has the latest 2017 drivers with updated win 10 driver signature support
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
I just gave it a shot and they installed fine for me. I'd recommend uninstalling the previous ones first to ensure they don't cause issues.
ThE_MarD said:
Derp! After checking it out? I think those drivers from that forum link I sent you are out of date sorry... They seem to cause issues for Windows 10 users. :\
This guide has the latest 2017 drivers with updated win 10 driver signature support
http://www.androidbrick.com/leeco-letv-x820-max-2-qdloader-9008-unbrick-twrpguide/
I just gave it a shot and they installed fine for me. I'd recommend uninstalling the previous ones first to ensure they don't cause issues.
Click to expand...
Click to collapse
Ill try it in a few hours, thank you very much for the help btw.
Would it be possible that the problem is the state of the cellphone at the moment of install?, since i cannot see what the screen shows once is "turned on"?
jemser said:
Ill try it in a few hours, thank you very much for the help btw.
Would it be possible that the problem is the state of the cellphone at the moment of install?, since i cannot see what the screen shows once is "turned on"?
Click to expand...
Click to collapse
No worries at all man. I know I've needed help in the past and it's nice when there is help to be had
ThE_MarD said:
No worries at all man. I know I've needed help in the past and it's nice when there is help to be had
Click to expand...
Click to collapse
Thanks, at any rate i did try the installation and again failed.
Tried different computer but it said it was required a digital signed certificate, it was a win7 PC. Failed installation as well
I guess im just unlucky and my phone is going to be left for dead
jemser said:
Thanks, at any rate i did try the installation and again failed.
Tried different computer but it said it was required a digital signed certificate, it was a win7 PC. Failed installation as well
I guess im just unlucky and my phone is going to be left for dead
Click to expand...
Click to collapse
Hmm if it's giving that error on Windows? You can force safe/test mode to allow unsigned drivers.
https://www.google.ca/amp/s/www.maketecheasier.com/install-unsigned-drivers-windows10/amp/
Same with Windows 7
https://www.raymond.cc/blog/loading-unsigned-drivers-in-windows-7-and-vista-64-bit-x64/
ThE_MarD said:
Hmm if it's giving that error on Windows? You can force safe/test mode to allow unsigned drivers.
https://www.google.ca/amp/s/www.maketecheasier.com/install-unsigned-drivers-windows10/amp/
Same with Windows 7
https://www.raymond.cc/blog/loading-unsigned-drivers-in-windows-7-and-vista-64-bit-x64/
Click to expand...
Click to collapse
It looks that it installed correctly, im going to try now.
Last night i was charging it to make sure all good, and i confirmed i cannot see anything but the phone still works as i am getting the notifications for hangouts or mail. I really do hope is not the screen as is the second one i bought
jemser said:
It looks that it installed correctly, im going to try now.
Last night i was charging it to make sure all good, and i confirmed i cannot see anything but the phone still works as i am getting the notifications for hangouts or mail. I really do hope is not the screen as is the second one i bought
Click to expand...
Click to collapse
After several attempts finally was able to complete the flash, unfortunately it came back to the same bright screen after the long power press.
Idk if might be the screen or the phone is just dead
jemser said:
After several attempts finally was able to complete the flash, unfortunately it came back to the same bright screen after the long power press.
Idk if might be the screen or the phone is just dead
Click to expand...
Click to collapse
Hmm yeah I'm not sure what to tell ya then sorry bud... Have you tried to refund the other screens? Might be able to and then buy from a different source?
Hello,
I'm using a Xiaomi Redmi Note 3 Pro.
I noticed that my USB was not working properly when I tried to use it with my DJI drone.
I then plugged it to my PC and nothing was happening. :crying:
I tried on 3 different PCs including an iMac, no reaction.
My girlfriend has the same phone and it works fine on the same PCs, so it's really coming from my phone.
I check in the developer options and MTP is activated.
I tried from the recovery (TWRP) and same thing, not data transfer at all.
I changed rom (from miui to lineage OS) and it didn't change anything.
For some reason, using an OTG cable with a usb stick or mouse works fine
Do you have any idea ?
could it be a hardware problem ? if so, why is OTG working ?
Thanks for your help
remizik said:
Hello,
I'm using a Xiaomi Redmi Note 3 Pro.
I noticed that my USB was not working properly when I tried to use it with my DJI drone.
I then plugged it to my PC and nothing was happening. :crying:
I tried on 3 different PCs including an iMac, no reaction...
Click to expand...
Click to collapse
If OTG works fine , your phone isn't the problem at all .
Try to get a new USB Cable , the one you're using might be faulty.
RaiZProduction said:
If OTG works fine , your phone isn't the problem at all .
Try to get a new USB Cable , the one you're using might be faulty.
Click to expand...
Click to collapse
I tried 4 different cables, and they work fine with my GF's phone (which is the same model by the way)
remizik said:
I tried 4 different cables, and they work fine with my GF's phone (which is the same model by the way)
Click to expand...
Click to collapse
I'll ask you such an idiot question , but we never now :
Did you choose the "File Transfer" Option in the "USB connected" notification you get when you plug your device ?
RaiZProduction said:
I'll ask you such an idiot question , but we never now :
Did you choose the "File Transfer" Option in the "USB connected" notification you get when you plug your device ?
Click to expand...
Click to collapse
I have no notification when I plug the usb cable, it's charging only.
I tried to force the MTP (file transfer) in the developer options like I said in my post, but it doesn't change anything
remizik said:
I have no notification when I plug the usb cable, it's charging only.
I tried to force the MTP (file transfer) in the developer options like I said in my post, but it doesn't change anything
Click to expand...
Click to collapse
Mmm...
Is your device recognized by ADB or Fastboot ?
It may not recognize it , but we never know, if it recognize your device, you'll be able to use the push/pull commands to transfer file with it.
That's anoying , because I never faced this issue , that was always because I didn't enable MTP.
hey...if I m not wrong it is with your drivers ..assuming u r on pc...go to local disk c: and find this file or search "wpdmtp.inf " in search panel ... if u find it proceed to next .....if u cannot then u have to run cmd with admin privileges and type there sfc/scannow wait for it to finish the system verification ....now if u found wpdmtp.inf then simply click on it and copy and paste on ur desktop and from thereon right click on it and tap install ..do it 2-3 times until u got ur device popping out on ur desktop ......
hit thanks if this worked ..
I hope it cud help u
RaiZProduction said:
Mmm...
Is your device recognized by ADB or Fastboot ?
It may not recognize it , but we never know, if it recognize your device, you'll be able to use the push/pull commands to transfer file with it.
That's anoying , because I never faced this issue , that was always because I didn't enable MTP.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nothing, as expected.
fastboot :
avijwr said:
hey...if I m not wrong it is with your drivers ..assuming u r on pc...go to local disk c: and find this file or search "wpdmtp.inf " in search panel ... if u find it proceed to next .....if u cannot then u have to run cmd with admin privileges and type there sfc/scannow wait for it to finish the system verification ....now if u found wpdmtp.inf then simply click on it and copy and paste on ur desktop and from thereon right click on it and tap install ..do it 2-3 times until u got ur device popping out on ur desktop ......
hit thanks if this worked ..
I hope it cud help u
Click to expand...
Click to collapse
it's not the problem, as I said, my GF has the same phone and it's working perfectly fine on our computers, it's only my phone that doesn't work.
thanks anyway
remizik said:
nothing, as expected.
...
Click to expand...
Click to collapse
Sorry but I'm out of idea
I hope you'll find out what was wrong
RaiZProduction said:
Sorry but I'm out of idea
I hope you'll find out what was wrong
Click to expand...
Click to collapse
merci quand même
yeah I'm out of ideas too, I think I tried everything
remizik said:
merci quand même
yeah I'm out of ideas too, I think I tried everything
Click to expand...
Click to collapse
De rien, ça me fait plaisir
Most of the time , the solution is just in front of us , and we can't see it until you accidentally change something .
Hope you'll find out :highfive:
Have a good day anyway
remizik said:
nothing, as expected.
fastboot :
it's not the problem, as I said, my GF has the same phone and it's working perfectly fine on our computers, it's only my phone that doesn't work.
thanks anyway
Click to expand...
Click to collapse
did u tried this???find and install this
"wpdmtp.inf " I am sure as I faced this problem too and found out the problem by doing this ....give this a try man
avijwr said:
did u tried this???find and install this
"wpdmtp.inf " I am sure as I faced this problem too and found out the problem by doing this ....give this a try man
Click to expand...
Click to collapse
why would I try this if it's working fine with another phone (exact same model) ?
edit : I tried it anyway, doesn't change anything as expected.
I dont know why u r not able to do this but u can go through this
https://appuals.com/how-to-fix-mtp-devices-not-connecting-on-windows-10/
---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
remizik said:
why would I try this if it's working fine with another phone (exact same model) ?
edit : I tried it anyway, doesn't change anything as expected.
Click to expand...
Click to collapse
hey,is ur phone showing in device manager as "mtp" or what name ..will try to figure out
avijwr said:
I dont know why u r not able to do this but u can go through this
https://appuals.com/how-to-fix-mtp-devices-not-connecting-on-windows-10/
---------- Post added at 10:35 AM ---------- Previous post was at 10:34 AM ----------
hey,is ur phone showing in device manager as "mtp" or what name ..will try to figure out
Click to expand...
Click to collapse
nothing in my device manager, no reaction on the computers at all.
and send a event log to me or post here ...it will surely send ur problem to us and solution too
---------- Post added at 10:42 AM ---------- Previous post was at 10:37 AM ----------
go adb...and copy any file inzip ..say 1.zip(in c:adb)and open cmd from there and type
adb devices
adb fastboot
adb push 1.zip/sdcard/1.zip if it succeeds then u r good to go with ur device if not then it's totally due to ur phone
or do this
1) boot into bootloader
2) start recovery from bootloader
3) use adb push to copy a file to the /sdcard
4) done
avijwr said:
and send a event log to me or post here ...it will surely send ur problem to us and solution too
---------- Post added at 10:42 AM ---------- Previous post was at 10:37 AM ----------
go adb...and copy any file inzip ..say 1.zip(in c:adb)and open cmd from there and type
adb devices
adb fastboot
adb push 1.zip/sdcard/1.zip if it succeeds then u r good to go with ur device if not then it's totally due to ur phone
or do this
1) boot into bootloader
2) start recovery from bootloader
3) use adb push to copy a file to the /sdcard
4) done
Click to expand...
Click to collapse
I'm sorry but you're clearly not reading or understanding my problem.
I wrote above that I can't transfer anything, either in MTP mode or recovery or fastboot.
use these codes in dialer nd use them
*#9090#
*#872564# - USB logging control
invalid codes it says
remizik said:
invalid codes it says
Click to expand...
Click to collapse
i searched them on xda as with ur device