Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
jagoda1 said:
Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
Click to expand...
Click to collapse
Your phone is not hard bricked.
Hard brick means that your motherboard is faulty.
Your phone is soft bricked. You can try to reflash, the same procedure, but when you connect the phone press the small red button for 20 secconds.
If its not working, try to reinstall the drivers.
Try and see what is going on!
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
teXew said:
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
Click to expand...
Click to collapse
Hi. To do a good job you must tell us what firmware do you want to install: KitKat(Android 4.4.2) or JellyBean(Android 4.2.2).
After that you must know what kind of firmware Stock or Custom.
Or... do you want to start your phone again.
I need one picture of your phone box with stickers on it! There you will see when your phone is made.
This are 2 kinds of phones: made after 03.2014 or before 03.2014.
For those made after 03.2014 you must use a diferent preloader.
I think this is what happent to your phone.
Flash procedure is the same but you must change the preloader.
Here is a link with one preloader and one good firmware.
Link: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
This firmware is KitKat, based on CN firmware. It have GAPPS and is ROOTED.
Here is what i use: http://forum.xda-developers.com/lenovo-p780/development/miui-lenovo-p780-t2976347
Good firmware too. It have custom recovery TWRP and GAPPS. ROOTED too. It is KITKAT.
Hope this helps you.
Good Luck.
Tnx for fast respond ...here is pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone year is 2013 ... i thought that my phone is ROW so i flash ROW rom(from this thread link) ...maybe that cause phone brick?
Sent from 1+1
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
jagoda1 said:
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
Click to expand...
Click to collapse
Use SP Flash v5 from this link.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
teXew said:
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
Click to expand...
Click to collapse
Baseband must be flashed from custom recovery like TWRP or CWM.
For flashng firmware check the drivers... what windows do you use ?
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
teXew said:
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
Click to expand...
Click to collapse
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
@stympy who ever are you thank you for helping us. You're a great person.
jagoda1 said:
@stympy who ever are you thank you for helping us. You're a great person.
Click to expand...
Click to collapse
You are wellcome!
If you have problems do not hesitate to ask!
Good Luck.
stympy said:
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
Click to expand...
Click to collapse
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
teXew said:
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
Click to expand...
Click to collapse
So... I think your phone is in some kind of bootloop.
Try to change your phone for at least 3 hours. Try again after.
Sent from my P780 using XDA-Developers mobile app
@stympy, i read on some Chinese forum that after formatting device(using FlashT) is possible to flash preloader.. but it is risky ... What do u think?
Or what about this methode: https://youtu.be/A3TmXtOA0IA :/
EDIT: Nahh i can't format, same error -.-'
Sent from 1+1
Related
- Was using Free X10 Beta 4, Changed Brightness Settings, Phone crashes
- It will not turn on, but it does vibrate when holding the power on button
- The Phone is recognised by USB and comes up with the Green Light although
does not update in SEUS - "Product Cannot Be Identified" (I've deleted/replaced blob_fs, still same problem)
- Attempted to update firmware with PC Companion, Does not work, "Download Error"
- I've also attempted to installed a generic firmware through Flashtool, whilst it takes a very long time to flash it finishes although phone remains not working after.
What is wrong? I've simply changed brightness settings and it's crashed. Please help me get my phone working, I need it urgently.
This has happened once before although I've been able to reflash the firmware via SEUS although this time it isn't identifying my phone.
How was your battery level?
Ive never heard about this situation in particular but i believe if you search there are threads on unbricking an x10. Take a look around the forums and search unbrick x10 and see what you get.
Sent from my X10i using XDA App
Battery level was near 100%.
The Search seems to be down, could anyone link me to an unbricking tutorial on here?
Thanks.
Bump..
Unbricking method doesn't work (just flashing via Flashtool with generic firmware). On top of that it takes ages to flash via this method for some reason.
Anyone have any idea what the problem is?? The phone should be working fine, all I did was change the brightness setting and then it crashed.
foxhound494 said:
Bump..
Unbricking method doesn't work (just flashing via Flashtool with generic firmware). On top of that it takes ages to flash via this method for some reason.
Anyone have any idea what the problem is?? The phone should be working fine, all I did was change the brightness setting and then it crashed.
Click to expand...
Click to collapse
it doesn't matter if U can access to flash mode. if u can, so before connect ur phone to computer, in SEUS Support zone =>start=>update software => start, then press blue letter "repair phone", wait until it ask for coonect phone in flash mode
Flash it with generic .sin files by flash tool......before that wipe total system.....
it should work....
kanchigo said:
it doesn't matter if U can access to flash mode. if u can, so before connect ur phone to computer, in SEUS Support zone =>start=>update software => start, then press blue letter "repair phone", wait until it ask for coonect phone in flash mode
Click to expand...
Click to collapse
I get the following error:
Download error unable to download your phone software. please check your internet connection or try again later
subhankar.ds said:
Flash it with generic .sin files by flash tool......before that wipe total system.....
it should work....
Click to expand...
Click to collapse
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
foxhound494 said:
I get the following error:
Download error unable to download your phone software. please check your internet connection or try again later
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
Click to expand...
Click to collapse
there are somthing wrong with ur comp. U'd better try again on other comp. install Companion and try repair it
foxhound494 said:
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
Click to expand...
Click to collapse
Can you post the flash tool log file?
kanchigo said:
there are somthing wrong with ur comp. U'd better try again on other comp. install Companion and try repair it
Click to expand...
Click to collapse
Uninstalled PC Companion and reinstalled it although same problem.
subhankar.ds said:
Can you post the flash tool log file?
Click to expand...
Click to collapse
I can't right now because I closed the Flash Tool although when it gets to flashing System it disconnects and the LED turns red, it then proceeds to saying everything has finished, disconnect phone and turn on.
Is your usb cable okay? maybe the problem is your usb cable. As of right now its IMPOSSIBLE to brick the X10 due to the bootloader not being cracked. The only problem can be your programs, cable, or maybe you dropped your X10 one to many times.
If you do get it sorted, you cant set brightness to auto, will cause a crash. This was highlighted in z's original freex10 thread.
Sent from my X10i using XDA App
Mister J said:
Is your usb cable okay? maybe the problem is your usb cable. As of right now its IMPOSSIBLE to brick the X10 due to the bootloader not being cracked. The only problem can be your programs, cable, or maybe you dropped your X10 one to many times.
Click to expand...
Click to collapse
It's not my programs, cables or computer as I've just flashed my friends X10 and it worked perfectly. I've never dropped my phone, It's done this after changing brightness setting on FreeX10 Beta 4.
It's also not the battery as I've tried using a friends battery and still the same problem.
foxhound494 said:
I can't right now because I closed the Flash Tool although when it gets to flashing System it disconnects and the LED turns red, it then proceeds to saying everything has finished, disconnect phone and turn on.
Click to expand...
Click to collapse
I believe, your data cable/port is faulty....
Check it with another data cable/repair the data port...
subhankar.ds said:
I believe, your data cable/port is faulty....
Check it with another data cable/repair the data port...
Click to expand...
Click to collapse
I flashed another X10 using this exact cable/port and it worked fine.
It can't be the data cable/port.
SEUS
remove SEUS, go to SE site, download ONLY device specific software, and it will only include the must recent SE x10 update, and try that. good
denenatse said:
remove SEUS, go to SE site, download ONLY device specific software, and it will only include the must recent SE x10 update, and try that. good
Click to expand...
Click to collapse
Followed steps. Frozen on "Checking connected phone". I don't think anyone will be able to help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
battery
remove battery for five seconds just before you connect and flash mode simultaneously.
denenatse said:
remove battery for five seconds just before you connect and flash mode simultaneously.
Click to expand...
Click to collapse
Same old problem. Failed to detect product. I've been trying to fix this phone for nearly a week now. Still nothing.
Xrecovery
reaching, but you wouldn't happen to have xrecovery installed? i say try repair phone once more with SE site if SEUS doesn't work. how far does it boot? anything?
hi everyone
i need your help now cause i know you all expert in these stuff
i used to have a Samsung mobile which it has an easy rooting,flashing,installing a rom , etc
but a few months ago I bought a Lenovo A660 mobile phone from Pandawill.com and its been working very well
since i decided to root it and at least change the default sd card to external sd cad( so that can i install more games and programs)
so I searched the net and I found out that the rooting way is sp flash tools
so, i downloaded SP Flash tools V3 and the right Scatter file and a new rom (this one because i was tired of my current rom)
anyway i installed android recovery mode<3e> and tried to install the rom from my sdcard (in the recovery menu) but every time it gave me this error ( E: Signature Verification Failed E: Signature Verification Failed Install aborted)
this error drove me crazy ! so i tried to install the rom from PC (my OS is windows XP SP3 ) so i connected it and i tried to do it but i didnt get succeeded so i connected my phone again ,and i selected the downloaded etotalk rom for every option ! like thisif you can see this photo, i attached it in the atachments below!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after I hit the download button , the red , yellow and purple bar went one after another and after that my phone was dead:crying:
no reaction from phone when I hit the power button,power button + volume up,or when i plugge it to the charger
so I desperately searched the net for an unbrick method but i found nothing so i decided to ask it here from you expert guys
anyway , i know what i did was completely silly but that was because I was Amateur and i didnt think that it could brick! :|
and i have to add this that when i connect my phone to pc,it finds it,i mean i can install another preloader on my phone but i dont know how to insatll other files (and i cant find the files (which i have to install ) either)
in the end, I apologies for my bad English,
I hope you can help me because you are my last hope
thank you again
still nobody?!!!
help me please
Help me guys!!
Sent from my GT-I5500 using Tapatalk 2
It wouldn't benefit anyone if i reply you in pm so here is the testpoint & A660_S019_1208024... :good:
And pls do you part in supporting the original DEV... :good:
yuweng said:
It wouldn't benefit anyone if i reply you in pm so here is the testpoint & A660_S019_1208024... :good:
And pls do you part in supporting the original DEV... :good:
Click to expand...
Click to collapse
HI
Anyway ,it means so much to me if somebody help me
whether its in public or in pm
i did not understand what to do and how to do
i know,i could do everything with software on my phone.
but if it goes to the hardware fixture,i would not risk to open my phone
so please,help me by describing me how to fix my phone and how
thanks again
Bro, obviously you found me, pm me BUT you didn't read this whole thread or you would've know how to unbrick it already...
The reason i closed that thread is b'cos it has become a request for Factory ROM & not unbricking it...
if you wouldn't wanna risk opening up your MTK device then do as adeelahmed11 (again, obviously you are also at that thread but never read it completely... i don't learn all these in a day or two but many many months browsing thru all MTK unbrick threads at china-iphone, elsewhere & also here on xda)
if you have made up your mind & wanna proceed to unbrick it yourself then follow as below...
1) Download the correct SPFT & install it
2) Download the MTK driver & install it
3) Download the A660 Factory ROM & extract it
4) Open up your A660, at SPFT, load scatter.txt click at Firmware->Upgrade use a wire & short the two point accordingly to this pic
5) After completion, your A660 will be unbrick...
Tips : A reference unbrick video by fellow xda friend, rnovino... :good:
Good Luck....
Added on 05 Feb 2014
In spite of already given you solutions on how to unbrick your A660 you still don't wanna follow it & continue to pm me...
That is one of the reason i don't go to other threads to help n00bs like you b'cos you guys just don't appreciate it & wasted my post count...
Anyway, i've made a generic unbrick tutorial here for other xda members who face this problem since i've already close my unbrick thread... :good:
Read all the links inside as previously many has pm me & at that time, i've given even less infos than this tut & still they manage to unbrick their MTK device, so Good Luck to you guys.... :fingers-crossed:
yuweng said:
Bro, obviously you found me, pm me BUT you didn't read this whole thread or you would've know how to unbrick it already...
The reason i closed that thread is b'cos it has become a request for Factory ROM & not unbricking it...
if you wouldn't wanna risk opening up your MTK device then do as adeelahmed11 (again, obviously you are also at that thread but never read it completely... i don't learn all these in a day or two but many many months browsing thru all MTK unbrick threads at china-iphone, elsewhere & also here on xda)
if you have made up your mind & wanna proceed to unbrick it yourself then follow as below...
1) Download the correct SPFT & install it
2) Download the MTK driver & install it
3) Download the A660 Factory ROM & extract it
4) Open up your A660, at SPFT, load scatter.txt click at Firmware->Upgrade use a wire & short the two point accordingly to this pic
5) After completion, your A660 will be unbrick...
Tips : A reference unbrick video by fellow xda friend, rnovino... :good:
Good Luck....
Click to expand...
Click to collapse
thank you so much for the help
but i don understand sth
consider number 1,2,3 as done
what should i do in number 4??
how should i install the original rom?
via SPFT ? (HOW?!)
in this method,should i have to open my phone to do sth with hardware???
AS I READ THOROUGH SO MANY TOPICS ABOUT BRICKED PHONES AND THE METHODS FOR UNBRICKING THEM,I FOUND OUT IN 90% OF BRICKED PHONES (WITH MTK 65XX CPUs ) ITS CANT BE DETECTED BY THE WINDOWS AND SPFT
BUT WHEN I CONNECT MY PHONE TO PC,MY PC DETECTS THAT A MTK DEVICE HAS BEEN CONNECTED TO PC
I THINK,MY PROBLEM IS THAT I DONT KNOW HOW TO INSTALL THE ORGINAL ROM TO MY PHONE EVEN WHEN IT GOT DETECTED BY PC WHEN I CONNECT IT
Faridcboy said:
thank you so much for the help
but i don understand sth
consider number 1,2,3 as done
what should i do in number 4??
how should i install the original rom?
via SPFT ? (HOW?!)
in this method,should i have to open my phone to do sth with hardware???
AS I READ THOROUGH SO MANY TOPICS ABOUT BRICKED PHONES AND THE METHODS FOR UNBRICKING THEM,I FOUND OUT IN 90% OF BRICKED PHONES (WITH MTK 65XX CPUs ) ITS CANT BE DETECTED BY THE WINDOWS AND SPFT
BUT WHEN I CONNECT MY PHONE TO PC,MY PC DETECTS THAT A MTK DEVICE HAS BEEN CONNECTED TO PC
I THINK,MY PROBLEM IS THAT I DONT KNOW HOW TO INSTALL THE ORGINAL ROM TO MY PHONE EVEN WHEN IT GOT DETECTED BY PC WHEN I CONNECT IT
Click to expand...
Click to collapse
is there anybody who could help me?!
Thanks to @yuweng my problem solved
i have downloaded several drivers, all are .inf format for Win764BIT because i am under Win864BIT .. but when i am trying to install the driver via device manager it says the drivers are not digitally signed .. and when i try using SP Flash Tool to test to flash stock rom to my currently working device .. it does not start, so i think it is not detected .. please help .. i am using a PH Version of CUBOT C11 (MT 6572) Device .. i can't try to make it work .. please help
xlSKYFiRElx said:
i have downloaded several drivers, all are .inf format for Win764BIT because i am under Win864BIT .. but when i am trying to install the driver via device manager it says the drivers are not digitally signed .. and when i try using SP Flash Tool to test to flash stock rom to my currently working device .. it does not start, so i think it is not detected .. please help .. i am using a PH Version of CUBOT C11 (MT 6572) Device .. i can't try to make it work .. please help
Click to expand...
Click to collapse
Install the drivers.. Digital signing is not required by into test mode and try
Regards
MasterAwesome
MasterAwesome said:
Install the drivers.. Digital signing is not required by into test mode and try
Regards
MasterAwesome
Click to expand...
Click to collapse
yes, but the problem is it wont install .. it keeps saying that the driver is not digitally signed or so and thus not installed
xlSKYFiRElx said:
yes, but the problem is it wont install .. it keeps saying that the driver is not digitally signed or so and thus not installed
Click to expand...
Click to collapse
As I said earlier for installing non signed drivers you need to use what is called as test mode
This can me enabled by starting the cmd with admin rights then type
Code:
bcdedit -set TESTSIGNING ON
Regards
MasterAwesome
MasterAwesome said:
As I said earlier for installing non signed drivers you need to use what is called as test mode
This can me enabled by starting the cmd with admin rights then type
Code:
bcdedit -set TESTSIGNING ON
Regards
MasterAwesome
Click to expand...
Click to collapse
i rebooted my PC and i see that test mode is inabled, i tried some .inf and still says they are not digitally signed ,, but when i tried another version of the .inf which is a different one .. it installed .. but returned Code 10 errors ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xlSKYFiRElx said:
i rebooted my PC and i see that test mode is inabled, i tried some .inf and still says they are not digitally signed ,, but when i tried another version of the .inf which is a different one .. it installed .. but returned Code 10 errors ?
Click to expand...
Click to collapse
you're not allowed to install the .inf files directly instead you will have to click the device name then click upadate drivers followed by the path to the inf folder
MasterAwesome said:
you're not allowed to install the .inf files directly instead you will have to click the device name then click upadate drivers followed by the path to the inf folder
Click to expand...
Click to collapse
what if the device is not showing in the device manager ?? .. or should i click these icons with yellow triangles instead ?
also this appears whenever i connect my phone to my PC
[/IMG]
the YunOS one on the bottom
xlSKYFiRElx said:
also this appears whenever i connect my phone to my PC
[/IMG]
the YunOS one on the bottom
Click to expand...
Click to collapse
Disconnect your device remove battery reconnect without battery you'll see it then
Regards
MasterAwesome
MasterAwesome said:
Disconnect your device remove battery reconnect without battery you'll see it then
Regards
MasterAwesome
Click to expand...
Click to collapse
ok so now i am seeing this PreLoader USB VCOM Port .. but for less than a second ..
the sound of a usb connected plays, then followed by usb disconnected sound .. if you know what i mean ..
it keeps reconnecting and reconnecting itself .. my phone is placed on a flat surface and the cable is connected at the rear of my CPU
xlSKYFiRElx said:
ok so now i am seeing this PreLoader USB VCOM Port .. but for less than a second ..
the sound of a usb connected plays, then followed by usb disconnected sound .. if you know what i mean ..
it keeps reconnecting and reconnecting itself .. my phone is placed on a flat surface and the cable is connected at the rear of my CPU
Click to expand...
Click to collapse
Now flash with sp flash tools
Regards
MasterAwesome
MasterAwesome said:
Now flash with sp flash tools
Regards
MasterAwesome
Click to expand...
Click to collapse
how ? my phones disconnects itself every second .. i dont know why
----------------------------- edit -----------------------------
ok so i tried flashing my phone with SP Flash tool, it flashed and it even showed the Green Circle thinggy at the end with a title "Download OK" .. but when i booted my phone, it says "Upgrading Android Apps" i was expecting it would be reverted to stock rom with no apps installed. but to my surprise its like nothing happened, my wallpaper is still there, all apps are still there, the settings, and configs and everything
----------------------------- edit -----------------------------
wait, my font was reverted to the stock fonts .. i used to have custom fonts .. does that mean the flash worked ?
xlSKYFiRElx said:
how ? my phones disconnects itself every second .. i dont know why
----------------------------- edit -----------------------------
ok so i tried flashing my phone with SP Flash tool, it flashed and it even showed the Green Circle thinggy at the end with a title "Download OK" .. but when i booted my phone, it says "Upgrading Android Apps" i was expecting it would be reverted to stock rom with no apps installed. but to my surprise its like nothing happened, my wallpaper is still there, all apps are still there, the settings, and configs and everything
----------------------------- edit -----------------------------
wait, my font was reverted to the stock fonts .. i used to have custom fonts .. does that mean the flash worked ?
Click to expand...
Click to collapse
Yes, it worked :good:
i see
MasterAwesome said:
Yes, it worked :good:
Click to expand...
Click to collapse
i see, thanks .. i can use this incase my phone gets bricked right ? .. but im still confused why my apps is still there after flashing ?? .. literally all of them
xlSKYFiRElx said:
i see, thanks .. i can use this incase my phone gets bricked right ? .. but im still confused why my apps is still there after flashing ?? .. literally all of them
Click to expand...
Click to collapse
Thats weird you're supposed to click firmware upgrade and not download
MasterAwesome said:
Thats weird you're supposed to click firmware upgrade and not download
Click to expand...
Click to collapse
oh ?. i though it was the "Download" which was to be pressed when flashing. thanks .. thanks sir, will try again later. when i get home
you truly helped me alot i owe you hehe .. i pressed thanks a couple of times as a sign of respect
------------------------------------------------------------- edit -------------------------------------------------------------
i tried the Firmware -> Upgrade button, but it tells me that all fields must be checked, but the cache file is missing, i never had a backup of it when i backup-ed my rom with droid tools :/ .. how can i fix this ? thanks
MasterAwesome said:
Thats weird you're supposed to click firmware upgrade and not download
Click to expand...
Click to collapse
I have a same trouble, you say to continue flashing, but I'm in read back mode, actually it can't perform read back because the driver same as xlSKYFiRElx, the driver keeps disconnecting, I tried to changed usb port, but nothing works
please help me.......
xlSKYFiRElx said:
oh ?. i though it was the "Download" which was to be pressed when flashing. thanks .. thanks sir, will try again later. when i get home
you truly helped me alot i owe you hehe .. i pressed thanks a couple of times as a sign of respect
------------------------------------------------------------- edit -------------------------------------------------------------
i tried the Firmware -> Upgrade button, but it tells me that all fields must be checked, but the cache file is missing, i never had a backup of it when i backup-ed my rom with droid tools :/ .. how can i fix this ? thanks
Click to expand...
Click to collapse
Create an empty image cache.img. Usually cache doesn't stop the boot of the device so using some other phone's cache.img or make one yourself...
Regards.
Sent from my XT1033 using XDA Free mobile app
Hey guys , i m trying to root the OUKITEL K6000 PRO but i cant make it. I 've searched in the net a lot, used (i think) all the tutorials (kingoroot, rootgenius, towelroot, rootkhp, android_root) but still i cant root it. If anyone has a hint i would appreciate it a lot, thanks for your time
How To ROOT
Please contact me I'll teach you, I posted a tutorial but the xda forum prevents me to send you the download links, [email protected]
Hello! I'm having problems to do root in my k6000 pro. Any news about this?
Hi there, any update on this?
Any update on this?
I need to know this as well. Can some one help. Found something here but it is in spanish:
http://www.movilesdualsim.com/tema/supersu-k6000-pro.140140/#post-1580954
Can someone translate it please if this is valid?
Found a french guide if anyone care to translate and post here please:
http://www.phonandroid.com/forum/ouiktel-k6000-pro-android-6-3g-ram-32g-avec-su-et-twrp-t151298.html
Okay I found this English guide and I have successfully install TWRP and Chainfire root.
I have followed this article and it works.
http://www.needrom.com/download/twrp-3-0-2-1-k6000-pro/
This is specs of Oukitel K6000 Pro:
SoC: MediaTek6753
CPU: MTK6753 Octa Core 1.3GHz
Build Number: OUKITEL_K6000_Pro_V8.0_20160607
Here is the screenshot from sp flash tool during the download process of TWRP to phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See the root status:
Root OK
Xposed OK
TWRP OK
And now an official x64 rom and also the 1st custom rom xOS appeared a few days ago.
hi everybody i have maked a mistake to root oukitel k6000pro...i have opened the flash tool...i added the scatter ....clicked Download...all good....and then....i'm going to open the phone and is not opening....i'm very crazy for this (( what can i do...please help meee !!!!!!!!!!!!!!!!!!
My phone has damaged after fashing the TWRP the device doesn't reboot
hello! my phone Oukitel K6000 pro how TWRP and Root please tell kind of TWRP version& root step by step Thank you.....
Hi friends,
I have few question :
1. know anyone what is difference between Clasics ROM and FZ ROM (newer phones coming with FZ ROM)
OUKITEL K6000 Pro FZ V11 20161119
OUKITEL K6000 Pro ROM V9.0 - 2016.09.24
2. I install FZ ROM to my phone with Clasics ROM without problem phone is working.
3. NEW phone: In android recovery mode is test "Root Integrity Check" Every time if i run this test i receive message
"Error: found 9 new files / System chceck FAIL!!" same error with original Clasic ROM and same error with FZ ROM
Thank You
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: .needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file and in the Format tab mark Validation, Autoformat flash and Format whole flash
conect the phone to the usb
Disconect the phone
On the Download tab, select Format all+Download
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
---------- Post added at 01:02 AM ---------- Previous post was at 12:48 AM ----------
babardy said:
My phone has damaged after fashing the TWRP the device doesn't reboot
Click to expand...
Click to collapse
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file from downloaded folder, and in the Format tab mark Validation, Autoformat flash and Format whole flash and click start
connect the phone to the usb
wait to finish (ok messege)
Disconnect the phone
On the Download tab, select Format all+Download and click Download
Connect the phone to the usb
what to finish (ok messege)
disconnect and power on
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
oukitelk6000 said:
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: .needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file and in the Format tab mark Validation, Autoformat flash and Format whole flash
conect the phone to the usb
Disconect the phone
On the Download tab, select Format all+Download
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
---------- Post added at 01:02 AM ---------- Previous post was at 12:48 AM ----------
Guys, this can be solved. If you have the mediatek drivers correctly installed, and then the driver signature deactivated (follow this tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/ ).
Download firmware with scatter file from here: needrom.com/download/oukitel-k6000-pro-v12/
TURN OFF THE PHONE (make sure is no background light, some times when the phone is dead ocurre this when pressing power botton)
After that use sp flash tool, Load scatter file from downloaded folder, and in the Format tab mark Validation, Autoformat flash and Format whole flash and click start
connect the phone to the usb
wait to finish (ok messege)
Disconnect the phone
On the Download tab, select Format all+Download and click Download
Connect the phone to the usb
what to finish (ok messege)
disconnect and power on
And this is it! OUKITEL K6000 PRO come back to live
Sorry for my strange english
One more thing, you will lose your imei,and there is no CDS option to change it.
You need to root the phone to asign an imei.
Click to expand...
Click to collapse
You are my hero, i have trying to fix my phone for hours and your description is perfect, thank you so much :highfive:
As there is no sub-form for this phone, I am going to piggyback off of this due to the keywords and such... But.. Does anyone have issues with getting anything more than EDGE network from within the USA? Namely TMobile. I checked the freq's the phone and TMO uses and most match up with a few missing on the LTE side, but utilizing one at least... But I have not been able to get anything past EDGE connection, and that won't even pull web pages... Any ideas?
And there is a way to root the new k6000 plus?
Truzzman2 said:
And there is a way to root the new k6000 plus?
Click to expand...
Click to collapse
wrong thread
Okitel k 6000 pro os
Greetings!
What would be safe to use to unlock root access for
OUKITEL_K6000_Pro_FZ_V12_20161129_211434
?
There doesn't seem to be anything specifically for this version at...
https://www.needrom.com/category/oukitel/k6000-pro/
-- There are releases for somewhat earlier or later versions. Releases with more positive feedback and ratings are not chronologically the closest to '20161129_211434' available.
Thank you in advance!
All the best!
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
File not found on your drive
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view?usp=drivesdk
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/file/d/1WjXKj8abnghy_OjfUW5TYkAppjWg0amH/view?usp=sharing
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
Update ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rafaello21 said:
Update ?
Click to expand...
Click to collapse
update possible for official rom :
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/open?id=1WjXKj8abnghy_OjfUW5TYkAppjWg0amH
I am looking for a stock rom of The Alpha X 6/128.
Have you any news ?
Thanks!
Originally posted here
Flash v03, root and recover lost IMEI
I have the 6/64 version. I'll share my method with you. The only one that didn't stuck me in booting TWRP over and over again.
First, I used fastboot flash recovery recovery.img and immediately after fastboot flash boot boot.img . It's the only way I managed to escape the problem. Now, I flashed the ROM provided by them, linked in this post here #123 and I lost IMEI. I used chamelephon to insert IMEI and the IMEI is there but I can't get any signal. What to do?!
Later edit: that didn't work the second time I tried. Neither camelephon.
New method: The last thing I tried was also successful. So, I flashed the ROM they gave me (coolicool store), which you can find here. I selected "auto flash" and "except bootloader" options in SP Flash Tool, pressed "start" and let it on for 3 second and pressed "stop". Then I selected "format all+download", pressed download and connected my phone while holding VOLUME UP. I kept it pressed a few seconds after seeing the red bar getting to 100%. After flashing I started the phone and installed the latest version OTA, v04. After updating I flashed recovery by fastboot flash recovery recovery.img. Of course, I was stuck in booting in TWRP like every other time so I thought of recovering boot from a backup, and since I didn't have one of my own, I used the one provided by @dreambo found here (thanks dude). When I was prompted to select the items I want to recover, I thought of choosing only "boot", in order to restore boot, but I said why not try restoring "nvram" and "nvdata" too, maybe it will solve my other problem , the lost IMEI problem. And it worked.
I finally succeeded to restore my IMEI and boot, thanks to a recovery, which, now I see, is mandatory before every modification you implement on your phone. Especially when you don't have original ROM.
Sorry for the long post and I hope it comes in handy
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
I have a Maze Alpha X 64GB in which I can only see a black screen will not turn on at all. Only the red charging LED light turns on to say that the phone is charging and connected to the computer.
I have tried flashing the ROM in the link in your post in this thread but only receive BROM errors in the SP Flash Tool.
I have tried the second link full rom V03 6/64GB Rom Official Stock as well but this one does not have a Preloader so I cannot use this ROM to unbrick my phone as my phone will not turn on it needs a Preloader for the phone to turn on.
My phone is being detected by my computer as it makes a sound when connecting the USB cable and also shows up in the Device Manager. Have also tried another computer and tried another USB Type-C cable but only receive BROM errors in the SP Flash Tool.
I have also uninstalled and re-installed the latest Mediatek drivers.
Any ideas?
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
amonapophis said:
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
Click to expand...
Click to collapse
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
shinystar77 said:
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Click to expand...
Click to collapse
amonapophis said:
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
Click to expand...
Click to collapse
I have tried that link just now downloaded and installed everything properly followed the instructions to a tee but still get the same errors.
I have installed the Drivers that came with the ROM that you have given to me which like you said are official directly from Maze but this has not made a difference for my Maze Alpha X 64GB.
I tried flashing with the Maze Alpha Flash Tool but just receive a DA error:
I tried flashing with the SP Flash Tool but receive a failed to get PMT info error:
Any Idea as to what I am doing wrong here or is my phone just hard-bricked?
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
amonapophis said:
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
Click to expand...
Click to collapse
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
shinystar77 said:
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
Click to expand...
Click to collapse
I'm sorry to hear that. Unfortunately, this forum seems dead and I can't help you, since I don't know that much either... It might help if you get to those phone servicing shops.