Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
File not found on your drive
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view?usp=drivesdk
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/file/d/1WjXKj8abnghy_OjfUW5TYkAppjWg0amH/view?usp=sharing
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
https://drive.google.com/file/d/12t3MHsAWBlXyKm_ktJt9GKqZ9sOrFRVi/view
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
Update ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rafaello21 said:
Update ?
Click to expand...
Click to collapse
update possible for official rom :
full rom V03 6/64GB Rom Ofifcial Stock
https://drive.google.com/open?id=1WjXKj8abnghy_OjfUW5TYkAppjWg0amH
I am looking for a stock rom of The Alpha X 6/128.
Have you any news ?
Thanks!
Originally posted here
Flash v03, root and recover lost IMEI
I have the 6/64 version. I'll share my method with you. The only one that didn't stuck me in booting TWRP over and over again.
First, I used fastboot flash recovery recovery.img and immediately after fastboot flash boot boot.img . It's the only way I managed to escape the problem. Now, I flashed the ROM provided by them, linked in this post here #123 and I lost IMEI. I used chamelephon to insert IMEI and the IMEI is there but I can't get any signal. What to do?!
Later edit: that didn't work the second time I tried. Neither camelephon.
New method: The last thing I tried was also successful. So, I flashed the ROM they gave me (coolicool store), which you can find here. I selected "auto flash" and "except bootloader" options in SP Flash Tool, pressed "start" and let it on for 3 second and pressed "stop". Then I selected "format all+download", pressed download and connected my phone while holding VOLUME UP. I kept it pressed a few seconds after seeing the red bar getting to 100%. After flashing I started the phone and installed the latest version OTA, v04. After updating I flashed recovery by fastboot flash recovery recovery.img. Of course, I was stuck in booting in TWRP like every other time so I thought of recovering boot from a backup, and since I didn't have one of my own, I used the one provided by @dreambo found here (thanks dude). When I was prompted to select the items I want to recover, I thought of choosing only "boot", in order to restore boot, but I said why not try restoring "nvram" and "nvdata" too, maybe it will solve my other problem , the lost IMEI problem. And it worked.
I finally succeeded to restore my IMEI and boot, thanks to a recovery, which, now I see, is mandatory before every modification you implement on your phone. Especially when you don't have original ROM.
Sorry for the long post and I hope it comes in handy
Stive87 said:
Unbrick Maze Alpha X 6/64GB only phone is black screen and phone is total brick (format all partition).
Rom is no official :
System : official rom for Maze Alpha B6/64GB . (! no update after - OTA !!),
boot, logo and recovery is normal (copy from original my phone).
Good luck.
Sorry for bad english, my french ^^
Click to expand...
Click to collapse
I have a Maze Alpha X 64GB in which I can only see a black screen will not turn on at all. Only the red charging LED light turns on to say that the phone is charging and connected to the computer.
I have tried flashing the ROM in the link in your post in this thread but only receive BROM errors in the SP Flash Tool.
I have tried the second link full rom V03 6/64GB Rom Official Stock as well but this one does not have a Preloader so I cannot use this ROM to unbrick my phone as my phone will not turn on it needs a Preloader for the phone to turn on.
My phone is being detected by my computer as it makes a sound when connecting the USB cable and also shows up in the Device Manager. Have also tried another computer and tried another USB Type-C cable but only receive BROM errors in the SP Flash Tool.
I have also uninstalled and re-installed the latest Mediatek drivers.
Any ideas?
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
amonapophis said:
I'm pretty sure it does have a preloader, since I have used it twice to install with SPFlash Tools.
Click to expand...
Click to collapse
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
shinystar77 said:
This ROM does not contain a Preloader:
full rom V03 6/64GB Rom Ofifcial Stock
That ROM would work if your phone is turning on. My Maze Alpha X does not turn on at all hence the need for a ROM that has a Preloader so that I can get the phone to turn on again.
I have tried the ROM in the first post in this thread I keep getting "could not get PMT info" error messages in the SP Flash Tool. That ROM has a Preloader included.
I have installed the Mediatek drivers that are on the Maze Mobile Download Center and have tried different computers with different USB Type-C cables with no luck. My Maze Alpha X is still dead and won't turn on only the red charging light turns on and stays on when connected to USB or Mains. The charging light does not go green to show that the phone is fully charged even if the phone has been plugged in for 6 to 8 hours.
Any ideas?
Click to expand...
Click to collapse
amonapophis said:
Don't use the one provided by OP. Use the one I got from Maze, it's complete. Download here, it's the official version. I haven't tested the one provided by OP, but the one posted by me here is the one that works. You will find a folder named 18-02-06... and inside one named R14. There you will find all the files needed, including preloader. I have to warn you, though, you will lose IMEI by flashing it ( I don't know why) and the method to restore it is quite complicated, but I wrote it above. Good luck restoring your phone!
Click to expand...
Click to collapse
I have tried that link just now downloaded and installed everything properly followed the instructions to a tee but still get the same errors.
I have installed the Drivers that came with the ROM that you have given to me which like you said are official directly from Maze but this has not made a difference for my Maze Alpha X 64GB.
I tried flashing with the Maze Alpha Flash Tool but just receive a DA error:
I tried flashing with the SP Flash Tool but receive a failed to get PMT info error:
Any Idea as to what I am doing wrong here or is my phone just hard-bricked?
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
amonapophis said:
I have noticed that on SPFT you selected "firmware upgrade". You should use "format all and download". Maybe this fixes your problem. I am not that much of a techie but I hope you will solve your problem.
Click to expand...
Click to collapse
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
shinystar77 said:
I have tried Format All + Download but get this error:
I have also tried Download only but get this error:
Click to expand...
Click to collapse
I'm sorry to hear that. Unfortunately, this forum seems dead and I can't help you, since I don't know that much either... It might help if you get to those phone servicing shops.
Related
Hi my friends In this guide i will teach you how to root your Jiayu g5s+
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps:
1.Drivers
2.Rooting
3.backup with mtkdroidtools
4.Install cwm through mtkdroid tools
1.DriversDownload the drivers and mtkdroidtools from here : https://mega.co.nz/#!z9oXgCpD!5Vil8gYSC3rwUdTIImt0PYKRObbZVc17i4GpVx7RKQw
extract the archive and connect your phone with debugging enabled
then go to start and type device manager you will see that adb driver arent installed double click on it locate usb folder you extracted and your done
or google how to install adb drivers
2.RootingThere are many tools to root this phone
the tools you can use to root your jiayu are
1.Cydia Impactor
2.Kingoroot <-i recommend this how to root go here -> http://androidxda.com/root-android-device-using-kingo-root
3.Vroot <-Becareful this one is backdoored run it via sandboxie http://sandboxie.com/
3.Backup with mtkdroidtoolsdownload scatter file https://mega.co.nz/#!KwpWURQC!8CGoDjsE-BsGwBOT08Ljzu9XsXlfIFo3uBKRYb-VvaU and put in mtkdroid tools directory
copy scatter also in backup directory of your phone
open mtk droid tools connect phone with usb debugging enabled then go to "root,backup,recovery" tab click on backup and wait till its funished
then click on "to prepare blocks for flash tool" then choose files.md5 and wait till its finished
4.cwm recoverythere are many tools you can use to install cwm recovery
but these two i used are good
1.open mtk droid tools go to "root,backup,recovery" tab click on "recovery and boot" button
Please check always your phone the tools ask you for revoke acces you have to allow them
2.Easy Magic PhilZ Touch Installer for MediaTek Devices ONLY
http://forum.xda-developers.com/showthread.php?t=2748169
Download here my backup : https://mega.co.nz/#!DlhEGKJC!GJYxUBaJIaiEMuqnCMmctgO7XYnvcrlpo9aJ1S1wCac
Many thanks my friend, you have saved my phone, it works correctly now
We will keep alive this thread for any news for this phone.
Again, thank you very match.
Amazing timing, I just started looking for ROMs for this phone yesterday and today you post!
Subscribed for future updates
Have any one problemes with TitaniumBackup ?
I can not backup any thing, restore any things !
the sdcard contains already app backups (from an other phone) TB already see them but no way to restore.
bricked Jiayu G5S+ (Elephone P6i)
Hi!
I tried to change the ROM for a friend's fake Jiayu G5S+ phone (a have some previous experience with flashing ROMs but neither me and especially my friend didn't know about this being a fake) so I tried to flash a G5S ROM and the phone now is bricked. The SP_Flash stops after the red stripe, "DA Download 100%" and that is all. From time to time I hear the sound of a new connected device in my PC speakers and the MTK USB port reappears in Device Manager.
Any idea how could I revive this phone, even it is a fake ?
My friend is very sad as I ruined his phone. Anyway, he couldn't use it with the original ROM because the touchscreen keyboard wasn't calibrated, he could not type almost anything.
L.E.: I tried to flash the backup that Gr4nDT3R0R posted above, now I get this error BROM ERROR: S_CHIP_TYPE_NOT_MATCH. I guess the ROM is not for my chip(set):
In the picture, I see that you do not provide the preloader.bin, you must give it (it is a part of the backup).
Then you have also to provide android, cache and data images, even from other ROM (system.img is in the backup, and you can extract cache.img and userdata.img from an p6i ROM)
Use, as you do, "format all + download" and it must works (if your phone is JY-G5S+, otherwise, use an entire ROM from elephone p6i)
Sent from my ZOPO ZP990+ using XDA Free mobile app
Yes, it might be wrong what I showed in that picture, I guess I tried a dozen of times to flash different ROMs. Today I finally managed to flash the original ROM provided by the author of this topic. It seems that after plugging in the phone to the USB port, right after the "ding-dong" sound you have to insert the battery. So I could see the so long waited yellow bar. After this I used the MTK Droid Tools and which showed that in fact the phone is a Quad Core MTK i6, 4.4.2, ALPS.KK1.MP1.v2.13 phone (instead of Jiayu G5S+, full HD screen, octa core...). I don't know how but after repeated tries now the phone is showing the real specs in About phone section.
Anyway, the reason I tried to change the ROM is that the touchscreen is acting weirdly, it is not calibrated, it is impossible to tap a text using the virtual keyboard. Even the menu items are very hard to tap as they don't respond to touching but the ones from vicinity. I have found a few recent videos with the same problems on Youtube but none have the solution. The screen is 540x960 and I guess the LCD driver is not the proper one.
Right know I am glad I managed to revive my friend's phone but I am pretty sad of his loss (I recommended him to by another trusted phone but he wouldn't listen to me).
Maybe in time, some smart guys will find any workaround for these Jiayu G5S+ fakes.
Jiayu g5s+ fake
Hi I Jiayu G5S + fake. I downloaded the rom elephone P6I update. The sp falasha tool I put the firmware upgrade. All went well. But the phone is now dead. When I try to give my deposit so still lists the error. If you give the firmware upgrade takes place so blue about three times and then prints cheksum failed. If so I will just download again writes PMT changed for the rom, it must be downloaded. Please if anyone know help us some advice.
fake Jiayu G5s+
doldik611 said:
Hi I Jiayu G5S + fake. I downloaded the rom elephone P6I update. The sp falasha tool I put the firmware upgrade. All went well. But the phone is now dead. When I try to give my deposit so still lists the error. If you give the firmware upgrade takes place so blue about three times and then prints cheksum failed. If so I will just download again writes PMT changed for the rom, it must be downloaded. Please if anyone know help us some advice.
Click to expand...
Click to collapse
sorry for my english
I'd done so.
I used this version of SP.FlashTool v3.1320.0.174.
In addition to the files for flashtool is in this post, add the two missing (cache and userdata) of this rom.
http://www.needrom.com/download/elephone-p6i/
Then select all and give a firmaware upgrade and also mark "DA DL All whit check sum" and has to work.
luck:good:
:good::good::good::good::good::good:
Super. Already mobile lives. It is everything. Your procedure is a 100%. Had 24 hours of suffering.
I also do not know English. I am from Slovakia.
Once again many thanks.
doldik611 said:
:good::good::good::good::good::good:
Super. Already mobile lives. It is everything. Your procedure is a 100%. Had 24 hours of suffering.
I also do not know English. I am from Slovakia.
Once again many thanks.
Click to expand...
Click to collapse
Glad many, it is a pleasure to help
Just do not understand why he had killed the recording rom from elephone P6I.Everything passed smoothly until final confirmation.Everything passed smoothly until final confirmation. I used SP_Flash_Tool_v5.1352.01.A choice of upgrade.Through net download it would not let me on.Well, after reboot phone has not responded to anything.Then somehow after about 50 experiment has released a record at least preloader.The display has been seen batteries.Again, after several attempts we have recorded the entire archive.But the phone cycles through the android logo.They let me into the start menu via the minus button and start.No I did not find the file from the backup to SD card.Meanwhile told me the phone and I revived to full finery.I also tried older flash tool, but not load file scater.I wanted to remove the fake hardware information.Therefore, I recorded the rom elephone.And he made I have a lot of joy instead of worry.I did not know that the phone is fake when buying.But when I gave her ignorance was added resellers deceive my next concern.I do not know what a cell phone.What is hardware and what rom fit into it.I would be grateful if someone figured out how rom is good for this model.
fake
doldik611 said:
Just do not understand why he had killed the recording rom from elephone P6I.Everything passed smoothly until final confirmation.Everything passed smoothly until final confirmation. I used SP_Flash_Tool_v5.1352.01.A choice of upgrade.Through net download it would not let me on.Well, after reboot phone has not responded to anything.Then somehow after about 50 experiment has released a record at least preloader.The display has been seen batteries.Again, after several attempts we have recorded the entire archive.But the phone cycles through the android logo.They let me into the start menu via the minus button and start.No I did not find the file from the backup to SD card.Meanwhile told me the phone and I revived to full finery.I also tried older flash tool, but not load file scater.I wanted to remove the fake hardware information.Therefore, I recorded the rom elephone.And he made I have a lot of joy instead of worry.I did not know that the phone is fake when buying.But when I gave her ignorance was added resellers deceive my next concern.I do not know what a cell phone.What is hardware and what rom fit into it.I would be grateful if someone figured out how rom is good for this model.
Click to expand...
Click to collapse
http://service.elephone.hk/forum.php?mod=forumdisplay&fid=98#.VGzQbvmG8Zn
looking here
Thanks.You do not have to quote such a long post.
Original rom for ELPHONE not want to work. I run the risk of custom rom?
doldik611 said:
Thanks.You do not have to quote such a long post.
Original rom for ELPHONE not want to work. I run the risk of custom rom?
Click to expand...
Click to collapse
developments???io find nothing , the custom MIU , goes just as bad , I've tried, and locks the touch
You have Jiayu G5S +?Use the old rom how did you get it?You rom works by elephone P6I?
doldik611 said:
You have Jiayu G5S +?Use the old rom how did you get it?You rom works by elephone P6I?
Click to expand...
Click to collapse
Yes, I hold Jiayu G5S +, but I do not keep the rom originale.l'ho lost by putting a rom Jiayu G5S original (wrong) and I raised up with this post.
you have the original rom Jiayu G5S + ?????
Have a little different.Because I put the factory settings.And then I made a backup.When you try to load the rom elephone I had a brick.After recording my backup files from + 2 elephone I do not have computer and boot logo Jiayu, but android.Rom of elephone not want to work.I tried to put preloader.bin from my backup, but hangs at log elephone.
The information on phone type I: i6 and quad core.
Online test of CPU-Z as follows: http://valid.canardpc.com/a/2amvfb
doldik611 said:
Have a little different.Because I put the factory settings.And then I made a backup.When you try to load the rom elephone I had a brick.After recording my backup files from + 2 elephone I do not have computer and boot logo Jiayu, but android.Rom of elephone not want to work.I tried to put preloader.bin from my backup, but hangs at log elephone.
The information on phone type I: i6 and quad core.
Online test of CPU-Z as follows: http://valid.canardpc.com/a/2amvfb
Click to expand...
Click to collapse
we get closer to the truth.
try this (looks much better).
You'll say
http://www.needrom.com/download/zlr-i6/
I tried and the phone did not work - brick.I do not remember what rom would be good.To show the actual hardware.And there are still other data.We do not know what brand and model really is.While we remain in a false indication.Therefore, I would like to prefer the original rom.I did not have to look for information under the designation as a fake.So no elephone P6I.It just seems so outwardly.But (intestines) hardware is different.Perhaps better, but also can be worse.While this is a mystery.:laugh:
Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
jagoda1 said:
Hello guys! My coumputor died while I was flashing new ROM and now my hard bricked. I can try and flash again but it gives me enable dram failed 4032 error. Is there any fix for this or is my phone gone?
Click to expand...
Click to collapse
Your phone is not hard bricked.
Hard brick means that your motherboard is faulty.
Your phone is soft bricked. You can try to reflash, the same procedure, but when you connect the phone press the small red button for 20 secconds.
If its not working, try to reinstall the drivers.
Try and see what is going on!
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
teXew said:
I have same problem ...i buy phone with this rom: https://www.dropbox.com/sc/22sicuooteaw2vq/AAA5zTMjCDKeVEDh3lqtjyEWa
Then i went to flash stock rom.. i download flash tool and installed all driveres ... i run flash tool and start to flashing rom. Rom file name is: p780_row_s124_140403_rooted_twrp_gapps
After flashing is finished ...my phone is stuck. No power, display is black(no light), no led blink when i connect to charger - nothing.
If i connect phone to pc, phone showing red led light and in device manager on pc it showin me phone like USB Serial device (com6) or MediaTek USB Port(com5) on windows7 ...no more mt6589.
What i do wrong?
Pictures:
https://www.dropbox.com/sc/q3k7ij409i3kcmf/AABYUeKPBGodcJq0cfrsc354a
Guy pls help! Sry for my english
Sent from 1+1
Click to expand...
Click to collapse
Hi. To do a good job you must tell us what firmware do you want to install: KitKat(Android 4.4.2) or JellyBean(Android 4.2.2).
After that you must know what kind of firmware Stock or Custom.
Or... do you want to start your phone again.
I need one picture of your phone box with stickers on it! There you will see when your phone is made.
This are 2 kinds of phones: made after 03.2014 or before 03.2014.
For those made after 03.2014 you must use a diferent preloader.
I think this is what happent to your phone.
Flash procedure is the same but you must change the preloader.
Here is a link with one preloader and one good firmware.
Link: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
This firmware is KitKat, based on CN firmware. It have GAPPS and is ROOTED.
Here is what i use: http://forum.xda-developers.com/lenovo-p780/development/miui-lenovo-p780-t2976347
Good firmware too. It have custom recovery TWRP and GAPPS. ROOTED too. It is KITKAT.
Hope this helps you.
Good Luck.
Tnx for fast respond ...here is pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone year is 2013 ... i thought that my phone is ROW so i flash ROW rom(from this thread link) ...maybe that cause phone brick?
Sent from 1+1
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
jagoda1 said:
I could flash the LIFE ROM for Lenovo P780 (used the china version) but then my 2g signal. I fixed that by flashing new baseband. But now I have a new problem whenever i want to flash a new ROM it dosent work only LIFE ROM works (i have to reflash it everytime)
Click to expand...
Click to collapse
Use SP Flash v5 from this link.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
teXew said:
How did u flash baseband? I constantly receive the same error when i try flash ROM...no progress :/
Click to expand...
Click to collapse
Baseband must be flashed from custom recovery like TWRP or CWM.
For flashng firmware check the drivers... what windows do you use ?
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
teXew said:
My display not working, so flashing through rcvy is not an option for me :/
...I use w10 on my pc, and w7 on my laptop...
Sent from 1+1
Click to expand...
Click to collapse
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
@stympy who ever are you thank you for helping us. You're a great person.
jagoda1 said:
@stympy who ever are you thank you for helping us. You're a great person.
Click to expand...
Click to collapse
You are wellcome!
If you have problems do not hesitate to ask!
Good Luck.
stympy said:
So... your phone is sofbrick! You need to flash again one firmware.
On windows 7 you must install the drivers!
Good drivers are located here.
Link1: http://forum.xda-developers.com/attachment.php?attachmentid=2945473&d=1411323831
Link2: http://forum.xda-developers.com/attachment.php?attachmentid=2945474&d=1411323831
First try to install link 1.
If you want me to help you must pm me with an team viewer session!
Click to expand...
Click to collapse
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
teXew said:
Dosnt work : Today i fresh instal w7 and all drivers like u sad but no.
After i installed all drivers, device manager recognizes my phone like device MTK USB Port( no more like MT65.. - same problem).. btw phone reconnect every 15 seconds ...uh
Click to expand...
Click to collapse
So... I think your phone is in some kind of bootloop.
Try to change your phone for at least 3 hours. Try again after.
Sent from my P780 using XDA-Developers mobile app
@stympy, i read on some Chinese forum that after formatting device(using FlashT) is possible to flash preloader.. but it is risky ... What do u think?
Or what about this methode: https://youtu.be/A3TmXtOA0IA :/
EDIT: Nahh i can't format, same error -.-'
Sent from 1+1
I've already tried many apps, such as kingoroot, kingroot, one click root, framaroot, etc. i really need help. Thx in advance
kebakkaran said:
I've already tried many apps, such as kingoroot, kingroot, one click root, framaroot, etc. i really need help. Thx in advance
Click to expand...
Click to collapse
I have same problem
Sent from my SM-J320FN using Tapatalk
imrandewana said:
I have same problem
Sent from my SM-J320FN using Tapatalk
Click to expand...
Click to collapse
Same issue here as well, nothing I try works on this phone, it's driving me insane.
EDIT: It's android 6, so you can't root the phone without a custom recovery.
WELP. So I just spent the past 2 days wasting my time on this god awful phone. I can't even access fastboot on this piece of crap, it comes up for 2 seconds and then disappears and no amount of "properly" installing usb drivers for it has helped. I even tried disabling driver signing and installing the drivers through adding legacy hardware. Nothing worked at all. So I thought I'd just install a custom recovery with sp flash tool. So I downloaded a stock rom for the vfd300 (my phone) from here: https://androidmtk.com/download-vodafone-stock-rom-models and ported TWRP using an ASUS Zenfone GO's TWRP.img.
Custom Recovery works fine, the phone does not. It is now stuck in a bootloop. Tried formatting everything (from TWRP) doesn't work. Tried flashing the rom again (even with the stock recovery) still stuck at bootloop, tried about 3 other vfd300 stock roms that people have uploaded to http://forum.gsmhosting.com and none of them have worked either. Currently downloading yet ANOTHER one and tbh I don't have high hopes. (EDIT: It didn't work)
Any help at this point would be appreciated.
Holy crispy crap it started............................. So I managed to find a working rom from (what appeared to be) some Vietnamese file hosting website .
You follow the instructions below at your own risk. No one is responsible for any damage done to your device but you.
I officially have root working on this device.
Now that I've done it, it's a surprisingly simple procedure. As I stated in the edit in my reply above, the VFD300 has Android 6 on it, which requires (afaik) a systemless root to be installed from recovery.
I ported the custom recovery from this thread (since the Z00VD has the same chip as the VFD) which you can download here.
Download the latest version of Chainfires beta SuperSU installer from this thread and transfer it to either your phones internal storage or SD card.
Also download a copy of SP Flash tool (if your fastboot works, use that instead). Finally, you will need this scatter file.
Unplug your phone from the computer and shut it down. Open SP Flash tool and click the download tab at the top.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click "choose" next to the Scatter-loading file box and select the path to the scatter file you downloaded. IMPORTANT Make sure all boxes below except recovery are unchecked and select Download Only in the drop-down box. Double click on recovery in the Location column and point it to the custom recovery image you downloaded.
Click the Download button at the top and then plug your phone back in. The bottom bar will turn red, then purple, then yellow and once it is fully done flashing you will get a pop-up box with a green tick as confirmation.
Unplug your phone and reboot into recovery (Power+Vol-Up). In the custom recovery, select install, go to the directory you transferred Chainfires beta SuperSU.zip to, install it and reboot. TWRP will ask you if you want it to install root, DO NOT LET IT INSTALL ROOT. Your phone may loop a few times and can take up to 10 minutes to boot the first time, but it will be successfully rooted.
If you need a copy of the stock rom, download this one. If you want to flash this rom, make sure you use the scatter file in the roms archive and select firmware upgrade from the Download Only box on SP Flash Tool.
EDIT: I'm so sorry I borked the hyperlink order. Instead of linking to the scatter file I linked to the entire rom and vice versa with the stock rom link
Vikeyev
vikeyev please contact me at [email protected]
Hey ummm, this is a great tut. I have problem with mine though unfortunately :/. I've done all steps correctly, with each of them followed thoroughly but then I get to the point where my device isn't identified when I connect it to the computer. None of those colored 'bottom bars' pop up nor the green tick as confirmation concept. PLEASE HELP ME !
[UPDATE] When I disconnect my device, some BROM error comes up but idek what it means.
InevitableDefeat276 said:
Hey ummm, this is a great tut. I have problem with mine though unfortunately :/. I've done all steps correctly, with each of them followed thoroughly but then I get to the point where my device isn't identified when I connect it to the computer. None of those colored 'bottom bars' pop up nor the green tick as confirmation concept. PLEASE HELP ME !
[UPDATE] When I disconnect my device, some BROM error comes up but idek what it means.
Click to expand...
Click to collapse
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
kathy9911 said:
vikeyev please contact me at [email protected]
Click to expand...
Click to collapse
....why?
stuck on loading
hi i'm a bit stumped here i followed all the steps to root my vfd 300 i got custom recovery installed but now when i reboot it the phone just sits on the loading part about 30 minutes i been waiting is there any thing i have missed or can do to solve this
thanks in advance
putzwon said:
hi i'm a bit stumped here i followed all the steps to root my vfd 300 i got custom recovery installed but now when i reboot it the phone just sits on the loading part about 30 minutes i been waiting is there any thing i have missed or can do to solve this
thanks in advance
Click to expand...
Click to collapse
Sounds like a boot loop. You need to download the stock rom (it should be about 700mb or so and in rar format). Once you've downloaded the stock rom, extract the archive to a folder somewhere (you will need something like 7zip or Winrar). Open SP Flash tool, load the scatter file from the extracted folder and make sure you select every box. There should be a check mark in each box. Change SP Flash tools dropdown box to firmware upgrade (by default it is on Download Only) and then flash it similar to how you did with the recovery (make sure you change the recovery to the custom one from above).
If my instructions aren't clear enough, I can do it again to my phone and take pictures of the entire process to make it easier to follow.
vikeyev said:
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
....why?
Click to expand...
Click to collapse
Yeah man! I've done that as well but had no luck .
1. I've enabled USB Debugging Mode and I've shut my phone down (NOTE: It has not been connected to the computer)
2. I opened the SP Flash tool and I clicked the download tab at the top
3. I then choose next to the scatter-file thing and have relocated it to the scatter file that I've downloaded from your link
4. ALL boxes are unchecked except recovery with download-only in the drop-down box
5. I've done the recovery image and everything and then...
6. I plug my phone in (Yes, it's completely shut down from step 1) with the USB cable and nothing shows up (Colored bars, tick etc.)
7. When I unplug it, an error comes up and then I'm completely stuck with no idea of what to do next
[UPDATE] - Does my phone have to be on the latest version?
Same problem
I'm having the same issue. I follow the instructions, phone off, press download, etc. I dont get any bars changing colours.
Did you manage to sort it out yet?
[update] managed to work it out. the MT65xx drivers werent installed properly. Use the instructions here (I cant post links!!! google: sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices) to get them working first, make sure the battery is out of your phone and the main instructions in this thread work first time.
huggies15 said:
I'm having the same issue. I follow the instructions, phone off, press download, etc. I dont get any bars changing colours.
Did you manage to sort it out yet?
[update] managed to work it out. the MT65xx drivers werent installed properly. Use the instructions here (I cant post links!!! google: sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices) to get them working first, make sure the battery is out of your phone and the main instructions in this thread work first time.
Click to expand...
Click to collapse
My brother, you're a genius . Thanks for helping out! It was worked. God bless!
stuck with a white circle runs
hi bro, i met the same issue.
I've done all the step successfully, and after i reboot my phone, it shows up with the logo of Vodafone, then a big circle became a smaller one, and then, the small circle runs endlessly.
I can go in recovery, but cannot boot the system.
I also did a memory test, got tow error
ERROR: NAND Flash was not detected!
ERROR: UFS was not detected!
I tried many times, and format whole flash and download all of them again.
it just doesn't work.
please help, thank you in advance.
frepeak said:
hi bro, i met the same issue.
I've done all the step successfully, and after i reboot my phone, it shows up with the logo of Vodafone, then a big circle became a smaller one, and then, the small circle runs endlessly.
I can go in recovery, but cannot boot the system.
I also did a memory test, got tow error
ERROR: NAND Flash was not detected!
ERROR: UFS was not detected!
I tried many times, and format whole flash and download all of them again.
it just doesn't work.
please help, thank you in advance.
Click to expand...
Click to collapse
Bro I got the EXACT same issue now because I accidentally installed Supersu through TWRP (which is pretty stupid because it was mentioned to AVOID the Supersu prompt when exiting TWRP). I've been stuck on bootloop for a couple of days now .
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
vikeyev said:
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
....why?
Click to expand...
Click to collapse
Bro, I accidentally installed Supersu when the prompt came up as I tried to exit TWRP. I know you said to NOT let it install, which was pretty stupid that I didn't read carefully what you wrote. Now I'm stuck in bootloop -_-.
Please help bro; I've tried flashing it to the stock rom, removing dalvik cache and everything etc. Nothing's working. Please help!
successfully got a rooted vfd 300
InevitableDefeat276 said:
Bro I got the EXACT same issue now because I accidentally installed Supersu through TWRP (which is pretty stupid because it was mentioned to AVOID the Supersu prompt when exiting TWRP). I've been stuck on bootloop for a couple of days now .
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
Bro, I accidentally installed Supersu when the prompt came up as I tried to exit TWRP. I know you said to NOT let it install, which was pretty stupid that I didn't read carefully what you wrote. Now I'm stuck in bootloop -_-.
Please help bro; I've tried flashing it to the stock rom, removing dalvik cache and everything etc. Nothing's working. Please help!
Click to expand...
Click to collapse
I was stuck in bootloop, but we don't share the same reason. I think there is something wrong with the rom above.
I found another rom, flash it, and problem solved, pretty simple. Now, I have a rooted vfd 300, even better than the stock rom, but you need to delete some app you don't like before you enjoy it.
you can find this rom by searching MT6580_S00_EMMC_MRA58K__6.0_VFD-300_Vodafone.zip
frepeak said:
I was stuck in bootloop, but we don't share the same reason. I think there is something wrong with the rom above.
I found another rom, flash it, and problem solved, pretty simple. Now, I have a rooted vfd 300, even better than the stock rom, but you need to delete some app you don't like before you enjoy it.
you can find this rom by searching MT6580_S00_EMMC_MRA58K__6.0_VFD-300_Vodafone.zip
Click to expand...
Click to collapse
can you provide link please google z not giving results for me
Vodafon VFD300 Firmware + TWRP + ROOT
As recommended above, Vodafon vfd 300 as a result of the phone turned on until the endless download -TWRP was not requested, sr1-SuperSU-v2.82 - sr120170608224931 and flash driver SP Flash Tool 3.1352.01 (5.1352.01) did not fit. I decided to solve the problem - the vfd 300 flashed through the firmware MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53 (1) (2), the flash driver SP_Flash_Tool_v5.1648_vin - the next way (remove the battery, hold the volume (-) until the end of the firmware, Download, connect the cable to the phone (the firmware will go to Emergency port about 8 minutes)
****************Next, we flash the TWRP - the flash driver SP_Flash_Tool_v5.1648_ the scatter and the TWRP are recommended - (MT6580_Android_scatter.Tht and
*Recovery-TWRP-VFD300.img) flashing.
**********We check TWRP (we clamp simultaneously ON-volume (+) release ON-opens TWRP.
**********Get Root rights ---- copy SR3-SuperSU-v2.79-SR3-20170114223742.zip to the phone folder, turn off the phone, go to TWRP find Install - SuperSu - Swaipe to instal - Dj not Install. All made happy, good luck. There will be questions [email protected]
InevitableDefeat276 said:
Yeah man! I've done that as well but had no luck .
1. I've enabled USB Debugging Mode and I've shut my phone down (NOTE: It has not been connected to the computer)
2. I opened the SP Flash tool and I clicked the download tab at the top
3. I then choose next to the scatter-file thing and have relocated it to the scatter file that I've downloaded from your link
4. ALL boxes are unchecked except recovery with download-only in the drop-down box
5. I've done the recovery image and everything and then...
6. I plug my phone in (Yes, it's completely shut down from step 1) with the USB cable and nothing shows up (Colored bars, tick etc.)
7. When I unplug it, an error comes up and then I'm completely stuck with no idea of what to do next
[UPDATE] - Does my phone have to be on the latest version?
Click to expand...
Click to collapse
you need to make sure you click download on flash tool then plug the usb in to phone and pc (also remember the battery has to be out of the phone for it to flash)
then you should see the red,yellow, green colours.
Hi all. I will be attempting to root my Vodafone VFD-300 tomorrow,after reading through the entire thread there seems to have been many issues with getting it done successfully. I also saw that it was suggested to provide step by step screenshots of the entire process. If anyone who managed to do the whole rooting with no problems could please do so again and provide us with the step by step screenshots,it would be greatly appreciated. Thanks in advance.
Hi everyone!
It was yesterday, when I plugged a 3.5 audio jack from a speaker to my Xiaomi Redmi Note 4x (Mido), the LED light flash red, and the phone turned off.I tried to turn it on, and all I got is bootloop (Mi logo with Unlocked >> Mi logo with Android, again and again)
I did a full backup in TWRP, and flashed a new rom, AND... the bootloop continue...
So I did some researches, and found a solution:
After flash a new rom, make a backup of that rom using TWRP > go to Wipe > Wipe Dalvik/Cache and wipe Cache > restore the backup and reboot.
I passed the bootloop, the MIUI 9 logo show up, setup somethings like language, accept Terms and Conditions, and... wait, there's no wifi, no signal, and definitely can not sign in to Mi Account, can not do anything, just sit there and staring at the login screen...
Then I think about the full backup up there ^
Restored, no bootloop, no Mi Account, just stuck at lockscreen, its said wrong password > back to TWRP > Advance > File Manager > /data/system > delete gatekeeper.key (2 files), locksetting (3 files), reboot and I got in to the screen.
So the problems are, there is no Wifi, no MAC address, unknown baseband, no signal.
MEID, IMEI still there, TWRP, fastboot still working.
Can someone help me about this case please!
Thank you so much!
P/s: Sorry about my English, my bad presentation ^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you tried to flash full dev firmware with Mitools? That was useful for my when I lost my EFS folder.... But first, format data and system with TWRP.
ramping said:
Did you tried to flash full dev firmware with Mitools? That was useful for my when I lost my EFS folder.... But first, format data and system with TWRP.
Click to expand...
Click to collapse
Do you mean XiaoMiTool?
If XiaoMiTool, I tried once, and fall to bootloop
tunglam24111993 said:
Hi everyone!
It was yesterday, when I plugged a 3.5 audio jack from a speaker to my Xiaomi Redmi Note 4x (Mido), the LED light flash red, and the phone turned off.I tried to turn it on, and all I got is bootloop (Mi logo with Unlocked >> Mi logo with Android, again and again)
I did a full backup in TWRP, and flashed a new rom, AND... the bootloop continue...
So I did some researches, and found a solution:
After flash a new rom, make a backup of that rom using TWRP > go to Wipe > Wipe Dalvik/Cache and wipe Cache > restore the backup and reboot.
I passed the bootloop, the MIUI 9 logo show up, setup somethings like language, accept Terms and Conditions, and... wait, there's no wifi, no signal, and definitely can not sign in to Mi Account, can not do anything, just sit there and staring at the login screen...
Then I think about the full backup up there ^
Restored, no bootloop, no Mi Account, just stuck at lockscreen, its said wrong password > back to TWRP > Advance > File Manager > /data/system > delete gatekeeper.key (2 files), locksetting (3 files), reboot and I got in to the screen.
So the problems are, there is no Wifi, no MAC address, unknown baseband, no signal.
MEID, IMEI still there, TWRP, fastboot still working.
Can someone help me about this case please!
Thank you so much!
P/s: Sorry about my English, my bad presentation ^^
Click to expand...
Click to collapse
seems like a firmware issue, i would suggest u to format data and reinstall miui
Theres a thread on the dev subforum with firmware extracted from miui full rom. Flash that via twrp.
Maybe is firmware.
Look at this.
MyNameIsRage said:
seems like a firmware issue, i would suggest u to format data and reinstall miui
Click to expand...
Click to collapse
coldplug said:
Theres a thread on the dev subforum with firmware extracted from miui full rom. Flash that via twrp.
Click to expand...
Click to collapse
jqm_ said:
Maybe is firmware.
Look at this.
Click to expand...
Click to collapse
I've tried flash a few roms for a dozen times, the result return the same.
But I will try these after work.
Thank you guys so much! :fingers-crossed::fingers-crossed::fingers-crossed:
download the modem files for mido. flash the zip. that will solve this issue. i had the same problem. flashing the modem files solved it.
MyNameIsRage said:
seems like a firmware issue, i would suggest u to format data and reinstall miui
Click to expand...
Click to collapse
coldplug said:
Theres a thread on the dev subforum with firmware extracted from miui full rom. Flash that via twrp.
Click to expand...
Click to collapse
jqm_ said:
Maybe is firmware.
Look at this.
Click to expand...
Click to collapse
My lastest backup was from a global MIUI rom flashed via XiaoMiTool.
"mido_global_images_8.1.18_20180118.0000.00_7.0_global_c557dab2eb"
(this is what I got in XiaoMiTool/rom folder in my PC).
At that thread's step 4, after flash those things, when I reboot it's show "No OS Installed, continue?"
Tried several times, same result
AND: The backup I had after I get the bootloop, not a backup when my phone still working.
i have same issue 2 weeks ago
the solution is to restore a file qcn and xqcn of the same model of your device (the exact same model)
you can restore this files by a program called QPST and you have to install qualcom driver before use of program
to use program you have to put your device in diagnostic mode enable USB debug in developer mode then use this code *#*#717717#*#* to enter diagnostic mode ( no need for root to do this )
after this your device will work but you have to restore your serial number, IMEI, wifi mac, bluetooth mac use the qualcom special tool to do this.
if you don't have the mac of wifi and bluetooth keep the one given to you by the qcn file you restored as no chance to be on same network with the same device .
NB. you can try to get your serial, IMEI, mac adresses use qualcom special tool before you start anything, so you can restore them later, you must be in diagnostic mode also to use qualcom special tool.
dr.moh1976 said:
i have same issue 2 weeks ago
the solution is to restore a file qcn and xqcn of the same model of your device (the exact same model)
you can restore this files by a program called QPST and you have to install qualcom driver before use of program
to use program you have to put your device in diagnostic mode enable USB debug in developer mode then use this code *#*#717717#*#* to enter diagnostic mode ( no need for root to do this )
after this your device will work but you have to restore your serial number, IMEI, wifi mac, bluetooth mac use the qualcom special tool to do this.
if you don't have the mac of wifi and bluetooth keep the one given to you by the qcn file you restored as no chance to be on same network with the same device .
NB. you can try to get your serial, IMEI, mac adresses use qualcom special tool before you start anything, so you can restore them later, you must be in diagnostic mode also to use qualcom special tool.
Click to expand...
Click to collapse
Tried this method yesterday, and when I try to restore, there's always an error, like "this qcn is not for my device" something, even I force it to restore, there're still an error. (I already edit the QCN file to my IMEI)
But as I said, my IMEI still there, so I stop trying that.
Now I'm stuck at bootloop, AGAIN...
tunglam24111993 said:
Tried this method yesterday, and when I try to restore, there's always an error, like "this qcn is not for my device" something, even I force it to restore, there're still an error. (I already edit the QCN file to my IMEI)
But as I said, my IMEI still there, so I stop trying that.
Now I'm stuck at bootloop, AGAIN...
Click to expand...
Click to collapse
Have u tried flashing latest firmware through twrp and then flash rom?
akisg said:
Have u tried flashing latest firmware through twrp and then flash rom?
Click to expand...
Click to collapse
You mean first format, wipe > install firmware > install rom?
akisg said:
Have u tried flashing latest firmware through twrp and then flash rom?
Click to expand...
Click to collapse
You mean:
Format dada/Wipe all > install firmware.zip > install rom.zip?
Let me try!
Do a full wipe and install the global dev ROM using TWRP. I've had that issue and it was solved using that process. Just wipe system, data, caches then install the global dev ROM using TWRP. Backups that have the firmware and bootloader partition included won't work.
tunglam24111993 said:
Tried this method yesterday, and when I try to restore, there's always an error, like "this qcn is not for my device" something, even I force it to restore, there're still an error. (I already edit the QCN file to my IMEI)
But as I said, my IMEI still there, so I stop trying that.
Now I'm stuck at bootloop, AGAIN...
Click to expand...
Click to collapse
ok my frist prolem also was bootloop
i tried every thing for 1 month even opened my device and connected the test points to reflash room as hardbricked device.
and at once every thing goes right after many failed trials now fully working device.
my advice is to read every tetourial carefully and try to read it from many sources always some small parts are missing like the correct drivers , disable windows signature enforcement, run as administrator , types of port and COM seen in device manager.
i am sure your device will work cause i have the same and no one helped in maitenance and company tell they will replace the chipset.
already i reached hard brick once in my trials there was no fastboot nor EDL.
don't stop.
---------- Post added at 04:38 PM ---------- Previous post was at 04:33 PM ----------
"this qcn is not for my device"
i got that error too when i used the one provided from internet
then i tried again with qcn i take from a friend phone we buy same models at same time
and it worked fine and no error
this is why i told you to get qcn from the same exact model
Now I'm stuck at bootloop, AGAIN... [/QUOTE]
It's hardware problem.
There's one guy get the same issues with me, he take his phone to a repair service, they replace the mainboard.
I think because of the high power (idk how to say) of the speaker, it get my device shock?
However, I send my phone to a repair service too, and still waiting for their call.
Thank you guys for your support, I really appreciated!
Same happened with me exact same with speaker
tunglam24111993 said:
It's hardware problem.
There's one guy get the same issues with me, he take his phone to a repair service, they replace the mainboard.
I think because of the high power (idk how to say) of the speaker, it get my device shock?
However, I send my phone to a repair service too, and still waiting for their call.
Thank you guys for your support, I really appreciated!
Click to expand...
Click to collapse
Same happened with me exact same with speaker
tunglam24111993 said:
It's hardware problem.
There's one guy get the same issues with me, he take his phone to a repair service, they replace the mainboard.
I think because of the high power (idk how to say) of the speaker, it get my device shock?
However, I send my phone to a repair service too, and still waiting for their call.
Thank you guys for your support, I really appreciated!
Click to expand...
Click to collapse
Could you solve the problem?
Hey everyone,
I think my non-rooted phone is stuck in a bootloop (device keeps connecting and disconnecting after every few seconds while connected to the PC via USB). I searched for a way to get a clean ROM install on it using SP Flash Tool (found a guide on GetDroidTips), but whenever the SP Flash Tool starts downloading, it gives me "STATUS_DA_HASH_MISMATCH" error. Does anybody know what might be causing this and what the error itself might mean?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model: Cubot Power
Error code solution?
madis121 said:
Hey everyone,
I think my non-rooted phone is stuck in a bootloop (device keeps connecting and disconnecting after every few seconds while connected to the PC via USB). I searched for a way to get a clean ROM install on it using SP Flash Tool (found a guide on GetDroidTips), but whenever the SP Flash Tool starts downloading, it gives me "STATUS_DA_HASH_MISMATCH" error. Does anybody know what might be causing this and what the error itself might mean?
Model: Cubot Power
Click to expand...
Click to collapse
Did you find a solution to this? All generic solutions don't seem to work.
Thedonqt said:
Did you find a solution to this? All generic solutions don't seem to work.
Click to expand...
Click to collapse
Hi , i thing that firmware is wrong maybe is for the same device but for example your device has 16GB internal memory but another device with same model has 8 gb of internal storage and that way this error come up.
So what you can try here is :
1. Find Global version for your device with latest firmware if you can find.
2. Put your phone in to the charge for about 2-3 hours to make sure that battery is charged.
3. Uninstall all drivers for your device by using USBDeview (scroll down for download links)
https://www.nirsoft.net/utils/usb_devices_view.html
To uninstall your drivers for device just open the tool , find the your driver for device , right click on it and click on uninstall.
4. Reset COM Ports , and once you reset reboot your PC .
To do that see this post : https://superuser.com/questions/408976/how-do-i-clean-up-com-ports-in-use
5. Reset Windows Defender status to default.
Here you have one example: https://www.youtube.com/watch?v=5t6ES_Py8lU
6. Disable antivirus or malware protection temporary.
7. Try to use old version of SP Flash Tool like one of v5.1xxx .
For example :
https://spflashtools.com/windows/sp-flash-tool-v5-1452
or
https://spflashtools.com/windows/sp-flash-tool-v5-1548
or try with latest version:
https://spflashtools.com/windows/sp-flash-tool-v5-1904
10. Run SP Flash tool with Administrator.
11. Make sure to have this checked inside SP flash options:
-Open Sp Flash tool , go to Options :
Connection - USB ( check USB speed to "High speed" , Battery to "auto detect")
Download - Check "DA DL All with Checksum" and also "Storage checksum" if you have those.
12. Try to just hold Power button while is flashing , once is finish release the power button.
13. Try to flash with disabled driver signature.
To do that follow this post:
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
14. If the problem is still there , try on another PC or with another version of System (Windows) ....
Good Luck
Teddy Lo said:
Hi , i thing that firmware is wrong maybe is for the same device but for example your device has 16GB internal memory but another device with same model has 8 gb of internal storage and that way this error come up.
So what you can try here is :
1. Find Global version for your device with latest firmware if you can find.
2. Put your phone in to the charge for about 2-3 hours to make sure that battery is charged.
3. Uninstall all drivers for your device by using USBDeview (scroll down for download links)
https://www.nirsoft.net/utils/usb_devices_view.html
To uninstall your drivers for device just open the tool , find the your driver for device , right click on it and click on uninstall.
4. Reset COM Ports , and once you reset reboot your PC .
To do that see this post : https://superuser.com/questions/408976/how-do-i-clean-up-com-ports-in-use
5. Reset Windows Defender status to default.
Here you have one example: https://www.youtube.com/watch?v=5t6ES_Py8lU
6. Disable antivirus or malware protection temporary.
7. Try to use old version of SP Flash Tool like one of v5.1xxx .
For example :
https://spflashtools.com/windows/sp-flash-tool-v5-1452
or
https://spflashtools.com/windows/sp-flash-tool-v5-1548
or try with latest version:
https://spflashtools.com/windows/sp-flash-tool-v5-1904
10. Run SP Flash tool with Administrator.
11. Make sure to have this checked inside SP flash options:
-Open Sp Flash tool , go to Options :
Connection - USB ( check USB speed to "High speed" , Battery to "auto detect")
Download - Check "DA DL All with Checksum" and also "Storage checksum" if you have those.
12. Try to just hold Power button while is flashing , once is finish release the power button.
13. Try to flash with disabled driver signature.
To do that follow this post:
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
14. If the problem is still there , try on another PC or with another version of System (Windows) ....
Good Luck
Click to expand...
Click to collapse
Massive thank you for taking the time to reply . I was about to jump straight to finding windows 7. I'd done most of those but haven't done vthe usbdeview or couple of hers. I'll try it all in sequence later and let others know :good:
UPDATE
TOK so an update. The problem is still happening after all the steps. I've tested on a windows 8 machine and the same error code is appearing. I'll try it on 7 later though.
As some backstory to mine is my phone entered a bootloop on Friday. It was running low on storage, about 8gb free of 128gb, during the bootloop I tried the power+volume keys to "battery pull" it which rebooted the phone back to normal. Shortly after the screen appeared low-res (like it was a much older screen) and then shut off and hasn't been on since.
The red LED shows when powering, with no screen activity, the phone connects to the computer and is read as a mediatek device. Holding the power down button for around 15 seconds with the device plugged into a wall charger makes the red LED go off then back on (not a flashing led though), and when doing the same while plugged in to a pc it connects like it was just plugged in.
My phone is a Umidigi S2 Pro (only one model for it instead of different size memories etc), the firmwares have been the official ones from the Umidigi S2 Pro roms page including the other tools which is where I flashed the stock Nougat ROM from last year so those should be fine (I'll post links if that's allowed on XDA-developers?). For some stupid reason Umidigi allowed a 3rd party to develop a UmiOS version of Android and used Efuse to restrict it's rooting ability, however this didn't stop the flashing of the 2 update ROMS before.
The code displayed in SP flash tools is M6575D if that's a known trouble one?
Hm , strange maybe the image files from stock firmwares is larger or small and sp flash tool can't verify hach ...
this :
Try with this version of SP Flash tool: https://spflashtools.com/windows/sp-flash-tool-v5-1828 also use checksum from stockfirmware . And make sure that all is checked inside SP Flash tool .
But this way do like this:
- Run SP Flash Tool with Administrator.
- Load full firmware inside SP Flash tool.
- Set Option " Download Only " check just preloader and click Start .
- Now connect your phone with USB 2 ports and see what is happening .
- If the flash is done load now full firmware again and uncheck just preloader.
Let me know if you got fixed .
Good Luck
ERROR: STATUS_STOR_EXHAUST (0xC003001D)
ERROR: STATUS_STOR_EXHAUST (0xC003001D)
The storage in your device has reached end of life, please change to use new device to do operations.
ANY SOLUTION TO THIS???? TRYING TO FLASH TECNO CAMON CX.....
- Set Option " Download Only " just check preloader and click Start .
I learned something new, after investigating this is done to flash the preloader, and fix
STATUS_DA_HASH_MISMATCHIt gives that error because the preloader is flooded/bricked. there is an incorrect hash code/mismatching code between the Brom , preloader in the scatter, and the DA.
After properly unlocking SLA, DAA(Being in Brom mode), fixing the preloader, using the right DA, right Scatter file, this code should match, and the error disappears.
(Flashing the rest of the Rom without preloader becomes possible on the 2nd run)
Thank you for teaching @Teddy Lo
This error wont exist in the future, won't be relevant. But it teaches us about the function of preloader, super data, data, and hash codes.
jdd1996 said:
STATUS_DA_HASH_MISMATCHIt gives that error because the preloader is flooded/bricked. there is an incorrect hash code/mismatching code between the Brom , preloader in the scatter, and the DA.
Click to expand...
Click to collapse
Thank you. After many hours of trying to find a fix, this has helped me. It worked on SP_Flash_Tool_v5.2032_Win.