I've already tried many apps, such as kingoroot, kingroot, one click root, framaroot, etc. i really need help. Thx in advance
kebakkaran said:
I've already tried many apps, such as kingoroot, kingroot, one click root, framaroot, etc. i really need help. Thx in advance
Click to expand...
Click to collapse
I have same problem
Sent from my SM-J320FN using Tapatalk
imrandewana said:
I have same problem
Sent from my SM-J320FN using Tapatalk
Click to expand...
Click to collapse
Same issue here as well, nothing I try works on this phone, it's driving me insane.
EDIT: It's android 6, so you can't root the phone without a custom recovery.
WELP. So I just spent the past 2 days wasting my time on this god awful phone. I can't even access fastboot on this piece of crap, it comes up for 2 seconds and then disappears and no amount of "properly" installing usb drivers for it has helped. I even tried disabling driver signing and installing the drivers through adding legacy hardware. Nothing worked at all. So I thought I'd just install a custom recovery with sp flash tool. So I downloaded a stock rom for the vfd300 (my phone) from here: https://androidmtk.com/download-vodafone-stock-rom-models and ported TWRP using an ASUS Zenfone GO's TWRP.img.
Custom Recovery works fine, the phone does not. It is now stuck in a bootloop. Tried formatting everything (from TWRP) doesn't work. Tried flashing the rom again (even with the stock recovery) still stuck at bootloop, tried about 3 other vfd300 stock roms that people have uploaded to http://forum.gsmhosting.com and none of them have worked either. Currently downloading yet ANOTHER one and tbh I don't have high hopes. (EDIT: It didn't work)
Any help at this point would be appreciated.
Holy crispy crap it started............................. So I managed to find a working rom from (what appeared to be) some Vietnamese file hosting website .
You follow the instructions below at your own risk. No one is responsible for any damage done to your device but you.
I officially have root working on this device.
Now that I've done it, it's a surprisingly simple procedure. As I stated in the edit in my reply above, the VFD300 has Android 6 on it, which requires (afaik) a systemless root to be installed from recovery.
I ported the custom recovery from this thread (since the Z00VD has the same chip as the VFD) which you can download here.
Download the latest version of Chainfires beta SuperSU installer from this thread and transfer it to either your phones internal storage or SD card.
Also download a copy of SP Flash tool (if your fastboot works, use that instead). Finally, you will need this scatter file.
Unplug your phone from the computer and shut it down. Open SP Flash tool and click the download tab at the top.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click "choose" next to the Scatter-loading file box and select the path to the scatter file you downloaded. IMPORTANT Make sure all boxes below except recovery are unchecked and select Download Only in the drop-down box. Double click on recovery in the Location column and point it to the custom recovery image you downloaded.
Click the Download button at the top and then plug your phone back in. The bottom bar will turn red, then purple, then yellow and once it is fully done flashing you will get a pop-up box with a green tick as confirmation.
Unplug your phone and reboot into recovery (Power+Vol-Up). In the custom recovery, select install, go to the directory you transferred Chainfires beta SuperSU.zip to, install it and reboot. TWRP will ask you if you want it to install root, DO NOT LET IT INSTALL ROOT. Your phone may loop a few times and can take up to 10 minutes to boot the first time, but it will be successfully rooted.
If you need a copy of the stock rom, download this one. If you want to flash this rom, make sure you use the scatter file in the roms archive and select firmware upgrade from the Download Only box on SP Flash Tool.
EDIT: I'm so sorry I borked the hyperlink order. Instead of linking to the scatter file I linked to the entire rom and vice versa with the stock rom link
Vikeyev
vikeyev please contact me at [email protected]
Hey ummm, this is a great tut. I have problem with mine though unfortunately :/. I've done all steps correctly, with each of them followed thoroughly but then I get to the point where my device isn't identified when I connect it to the computer. None of those colored 'bottom bars' pop up nor the green tick as confirmation concept. PLEASE HELP ME !
[UPDATE] When I disconnect my device, some BROM error comes up but idek what it means.
InevitableDefeat276 said:
Hey ummm, this is a great tut. I have problem with mine though unfortunately :/. I've done all steps correctly, with each of them followed thoroughly but then I get to the point where my device isn't identified when I connect it to the computer. None of those colored 'bottom bars' pop up nor the green tick as confirmation concept. PLEASE HELP ME !
[UPDATE] When I disconnect my device, some BROM error comes up but idek what it means.
Click to expand...
Click to collapse
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
kathy9911 said:
vikeyev please contact me at [email protected]
Click to expand...
Click to collapse
....why?
stuck on loading
hi i'm a bit stumped here i followed all the steps to root my vfd 300 i got custom recovery installed but now when i reboot it the phone just sits on the loading part about 30 minutes i been waiting is there any thing i have missed or can do to solve this
thanks in advance
putzwon said:
hi i'm a bit stumped here i followed all the steps to root my vfd 300 i got custom recovery installed but now when i reboot it the phone just sits on the loading part about 30 minutes i been waiting is there any thing i have missed or can do to solve this
thanks in advance
Click to expand...
Click to collapse
Sounds like a boot loop. You need to download the stock rom (it should be about 700mb or so and in rar format). Once you've downloaded the stock rom, extract the archive to a folder somewhere (you will need something like 7zip or Winrar). Open SP Flash tool, load the scatter file from the extracted folder and make sure you select every box. There should be a check mark in each box. Change SP Flash tools dropdown box to firmware upgrade (by default it is on Download Only) and then flash it similar to how you did with the recovery (make sure you change the recovery to the custom one from above).
If my instructions aren't clear enough, I can do it again to my phone and take pictures of the entire process to make it easier to follow.
vikeyev said:
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
....why?
Click to expand...
Click to collapse
Yeah man! I've done that as well but had no luck .
1. I've enabled USB Debugging Mode and I've shut my phone down (NOTE: It has not been connected to the computer)
2. I opened the SP Flash tool and I clicked the download tab at the top
3. I then choose next to the scatter-file thing and have relocated it to the scatter file that I've downloaded from your link
4. ALL boxes are unchecked except recovery with download-only in the drop-down box
5. I've done the recovery image and everything and then...
6. I plug my phone in (Yes, it's completely shut down from step 1) with the USB cable and nothing shows up (Colored bars, tick etc.)
7. When I unplug it, an error comes up and then I'm completely stuck with no idea of what to do next
[UPDATE] - Does my phone have to be on the latest version?
Same problem
I'm having the same issue. I follow the instructions, phone off, press download, etc. I dont get any bars changing colours.
Did you manage to sort it out yet?
[update] managed to work it out. the MT65xx drivers werent installed properly. Use the instructions here (I cant post links!!! google: sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices) to get them working first, make sure the battery is out of your phone and the main instructions in this thread work first time.
huggies15 said:
I'm having the same issue. I follow the instructions, phone off, press download, etc. I dont get any bars changing colours.
Did you manage to sort it out yet?
[update] managed to work it out. the MT65xx drivers werent installed properly. Use the instructions here (I cant post links!!! google: sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices) to get them working first, make sure the battery is out of your phone and the main instructions in this thread work first time.
Click to expand...
Click to collapse
My brother, you're a genius . Thanks for helping out! It was worked. God bless!
stuck with a white circle runs
hi bro, i met the same issue.
I've done all the step successfully, and after i reboot my phone, it shows up with the logo of Vodafone, then a big circle became a smaller one, and then, the small circle runs endlessly.
I can go in recovery, but cannot boot the system.
I also did a memory test, got tow error
ERROR: NAND Flash was not detected!
ERROR: UFS was not detected!
I tried many times, and format whole flash and download all of them again.
it just doesn't work.
please help, thank you in advance.
frepeak said:
hi bro, i met the same issue.
I've done all the step successfully, and after i reboot my phone, it shows up with the logo of Vodafone, then a big circle became a smaller one, and then, the small circle runs endlessly.
I can go in recovery, but cannot boot the system.
I also did a memory test, got tow error
ERROR: NAND Flash was not detected!
ERROR: UFS was not detected!
I tried many times, and format whole flash and download all of them again.
it just doesn't work.
please help, thank you in advance.
Click to expand...
Click to collapse
Bro I got the EXACT same issue now because I accidentally installed Supersu through TWRP (which is pretty stupid because it was mentioned to AVOID the Supersu prompt when exiting TWRP). I've been stuck on bootloop for a couple of days now .
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
vikeyev said:
Did you make sure to power off your phone and unplug the USB, then press download and reconnect your phones usb? Don't turn the phone back on, just replug it in after you hit the download button.
....why?
Click to expand...
Click to collapse
Bro, I accidentally installed Supersu when the prompt came up as I tried to exit TWRP. I know you said to NOT let it install, which was pretty stupid that I didn't read carefully what you wrote. Now I'm stuck in bootloop -_-.
Please help bro; I've tried flashing it to the stock rom, removing dalvik cache and everything etc. Nothing's working. Please help!
successfully got a rooted vfd 300
InevitableDefeat276 said:
Bro I got the EXACT same issue now because I accidentally installed Supersu through TWRP (which is pretty stupid because it was mentioned to AVOID the Supersu prompt when exiting TWRP). I've been stuck on bootloop for a couple of days now .
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
Bro, I accidentally installed Supersu when the prompt came up as I tried to exit TWRP. I know you said to NOT let it install, which was pretty stupid that I didn't read carefully what you wrote. Now I'm stuck in bootloop -_-.
Please help bro; I've tried flashing it to the stock rom, removing dalvik cache and everything etc. Nothing's working. Please help!
Click to expand...
Click to collapse
I was stuck in bootloop, but we don't share the same reason. I think there is something wrong with the rom above.
I found another rom, flash it, and problem solved, pretty simple. Now, I have a rooted vfd 300, even better than the stock rom, but you need to delete some app you don't like before you enjoy it.
you can find this rom by searching MT6580_S00_EMMC_MRA58K__6.0_VFD-300_Vodafone.zip
frepeak said:
I was stuck in bootloop, but we don't share the same reason. I think there is something wrong with the rom above.
I found another rom, flash it, and problem solved, pretty simple. Now, I have a rooted vfd 300, even better than the stock rom, but you need to delete some app you don't like before you enjoy it.
you can find this rom by searching MT6580_S00_EMMC_MRA58K__6.0_VFD-300_Vodafone.zip
Click to expand...
Click to collapse
can you provide link please google z not giving results for me
Vodafon VFD300 Firmware + TWRP + ROOT
As recommended above, Vodafon vfd 300 as a result of the phone turned on until the endless download -TWRP was not requested, sr1-SuperSU-v2.82 - sr120170608224931 and flash driver SP Flash Tool 3.1352.01 (5.1352.01) did not fit. I decided to solve the problem - the vfd 300 flashed through the firmware MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53 (1) (2), the flash driver SP_Flash_Tool_v5.1648_vin - the next way (remove the battery, hold the volume (-) until the end of the firmware, Download, connect the cable to the phone (the firmware will go to Emergency port about 8 minutes)
****************Next, we flash the TWRP - the flash driver SP_Flash_Tool_v5.1648_ the scatter and the TWRP are recommended - (MT6580_Android_scatter.Tht and
*Recovery-TWRP-VFD300.img) flashing.
**********We check TWRP (we clamp simultaneously ON-volume (+) release ON-opens TWRP.
**********Get Root rights ---- copy SR3-SuperSU-v2.79-SR3-20170114223742.zip to the phone folder, turn off the phone, go to TWRP find Install - SuperSu - Swaipe to instal - Dj not Install. All made happy, good luck. There will be questions [email protected]
InevitableDefeat276 said:
Yeah man! I've done that as well but had no luck .
1. I've enabled USB Debugging Mode and I've shut my phone down (NOTE: It has not been connected to the computer)
2. I opened the SP Flash tool and I clicked the download tab at the top
3. I then choose next to the scatter-file thing and have relocated it to the scatter file that I've downloaded from your link
4. ALL boxes are unchecked except recovery with download-only in the drop-down box
5. I've done the recovery image and everything and then...
6. I plug my phone in (Yes, it's completely shut down from step 1) with the USB cable and nothing shows up (Colored bars, tick etc.)
7. When I unplug it, an error comes up and then I'm completely stuck with no idea of what to do next
[UPDATE] - Does my phone have to be on the latest version?
Click to expand...
Click to collapse
you need to make sure you click download on flash tool then plug the usb in to phone and pc (also remember the battery has to be out of the phone for it to flash)
then you should see the red,yellow, green colours.
Hi all. I will be attempting to root my Vodafone VFD-300 tomorrow,after reading through the entire thread there seems to have been many issues with getting it done successfully. I also saw that it was suggested to provide step by step screenshots of the entire process. If anyone who managed to do the whole rooting with no problems could please do so again and provide us with the step by step screenshots,it would be greatly appreciated. Thanks in advance.
Related
UPDATED. This will put you to STOCK 2.2! Using ODIN thanks to eugene373.
If you want stock and are able to get in to recovery and want a flashable rom. click here
This started as a thread asking for help, with the little help I got... and a little searching NOW this thread is to help other people who are having the same problem
ALSO its to show that a little searching on this forum, you will pry find the answers you are looking for.
EVERYTHING in here I found in the Bible, that is located in the development section.
This guide is for non hardware locked vibrants... if you are hardware locked check out this threadhere
First off you will need to get odin and the correct files.
I have packaged eugenes 2.2 pit and tar(md5) files in a zip along with odin. these are all the files you will need and you can download them here
(remember this is for unofficial 2.2 if you want Official 2.1 files click here )
s15274n (thread here) has everything you will need in his [Tips & Tricks] thread AND MORE!
so make sure to check that out and read the "EASY WAY TO GET THE JI6 UPDATE" before you go any further with my thread.
Georgegreco86(thread here) made this awesome image (below) and it works perfectly....
HOWEVER some times there are some complications that happen that i cover below.
TO GET IN TO DOWNLOAD MODE
I have found the EASIEST WAY to do this is:
1.pull the battery out of the phone.
2.plug usb into computer
3.put the battery back in the phone
4.hold in the volume up and down
5.plug usb in to phone
it should bring you to the download mode in seconds.
now you should unplug the usb From the phone..
make sure the battery stays in, and open odin.
now follow the instructions below.
1. Open Odin3_v1.0
2. Load .512 into the PIT placeholder
(In this case s1_odin_20100512)
3. Load *FILE.tar* into PDA placeholder
(In this case Eugene_2E_JK2_Froyo.tar.md5)
4. Make sure COM port has a number in it
This means your phone is connected, if your phone is not connected make sure you have the correct drivers)
5. Press Start!
6. If you it all works your done... if not keep reading!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IF YOU RUN IN TO PROBLEMS!
If your phone is not connecting to odin.It might be because you need the correct drivers, thanks to TGA_Gunnman they are located here http://forum.xda-developers.com/showthread.php?t=728929.
I was able to just let the computer search for them and with a few clicks, had the drivers installed.
To install the Android USB driver on Windows Vista for the first time:
1. Connect your Android-powered device to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard.
2. Select "Locate and install driver software."
3. Click "Next." Vista may prompt you to confirm the privilege elevation required for driver installation. Confirm it.
Freezing on "cache.rfs"
searching on google i found a website called fractionalphones.com, the post was about this and it said what i had to do was reboot my computer and hit F8 (just keep touching it) and when it gets to the "safemode screen" arrow down to "Disable Digital Signature Verification"
Also a problem Some people had was the usb port used...
So if it does not work try a new port!
Use oclf. Remove the lag fix first, then ant other optimizations you may have clicked, then ext 2 and finally root. I had to do this to send back my phone. Now the ext2 takes awhile so be patient.
Sent from my SGH-T959 using XDA App
ipeench said:
So if I have rooted the phone and have installed the OCLF from the market. But I wasn't the phone back as if I just took it ot the box.. What's the best way to do that.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
The easiest and cleanest way to do it is to Odin the phone back to stock.
Odin Visual Guide
Stock Firmware
tjhart85 said:
The easiest and cleanest way to do it is to Odin the phone back to stock.
Click to expand...
Click to collapse
Sweet, you even put in links to reading material! In a day of being flamed for asking questions like this..words can not express the kindness you have shown, thank you.
Sent from my SGH-T959 using XDA App
creglenn said:
Use oclf. Remove the lag fix first, then ant other optimizations you may have clicked, then ext 2 and finally root. I had to do this to send back my phone. Now the ext2 takes awhile so be patient.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It wont let me remove the lag fix, v2 says i dont have the lag fix installed
and v1 says "you only have 346MB free on RFS, but 364MB used on EXT2. You must free up some space"
and then it tells me i dont have enough to install either v1 or v2 of the lag fix
BUT my quadrant is 2000+ so i know its installed.
i saw the other tread about this but it didnt really tell me much.
ipeench said:
It wont let me remove the lag fix, v2 says i dont have the lag fix installed
and v1 says "you only have 346MB free on RFS, but 364MB used on EXT2. You must free up some space"
and then it tells me i dont have enough to install either v1 or v2 of the lag fix
BUT my quadrant is 2000+ so i know its installed.
i saw the other tread about this but it didnt really tell me much.
Click to expand...
Click to collapse
LOL, One of the reasons I suggested Odin. It'll "just work" even if you have the lagfix (at least it did for me). Make sure you backup everything on the SD card that you want & tell it to repartition. If all goes well, everything down to the internal SD card has been put back to stock.
I know when I did the lagfix, I had a PC app that just ran ADB commands in a batch file (basically). After a week or so it got unbearably slow and even the remove lag fix that came with it wouldn't work, so I used Odin to go back to stock.
--------
But, I think what it's complaining about is you need to free up ~20MB of space in order to remove the lag fix. Since it needs to move the files that it put on the ext2 partition back to the RFS partition, it needs at least that much space before it can move the files & then delete the ext2 partition.
bumping because I figured out what I was doing and I think this can help a lot of other people.
I'm trying to do the "Odin back to stock" process but I'm having a little trouble. I've got all the files and opened Odin etc. I entered the .pit file and the .tar file. Auto-reboot and f. reset time are checked. I click start and I get "<OSM> All threads completed. (succeed 0 / failed 0)"
What am I doing wrong?
trunkstar1 said:
I'm trying to do the "Odin back to stock" process but I'm having a little trouble. I've got all the files and opened Odin etc. I entered the .pit file and the .tar file. Auto-reboot and f. reset time are checked. I click start and I get " All threads completed. (succeed 0 / failed 0)"
What am I doing wrong?
Click to expand...
Click to collapse
Odin isn't recognizing your phone. You should double check that the drivers are properly installed. Then, make sure Odin is on and click Reset if need be. Put phone into Download Mode and then plug it into computer.. A yellow box should appear at top of Odin, which let's you know you're successfully connected.
Hope that helps!
.:|Sent from my Super AWESOME Vibrant using XDA App|:.
That did help, thanks. And, with some help from other XDA forumers I got the right drivers installed and I'm in motion now. Thanks again.
trunkstar1 said:
That did help, thanks. And, with some help from other XDA forumers I got the right drivers installed and I'm in motion now. Thanks again.
Click to expand...
Click to collapse
With all that i have taken from this forum..I'm glad i can finally give back!
ipeench said:
This started as a thread asking for help, I got a little help(thank you for pointing me in the right direction tjhart85)
NOW this thread is to help other people who are having the same problem
ALSO to show that a little searching on this forum, you will pry find the answers you are looking for.
pretty much everything in here i found in the Bible, that is located in the development section.
This is for non hardware locked vibrants... i dunno what to tell you if yours is hardware locked because honestly i have no clue what that even means :-/ I'm just as new to this as you are!
First off you will need to get odin and the correct files.
and rhcp0112345(thread here) found the "true stock 2.1 firmware for vibrant" and all the files you will need,including odin are bundled in a nice little zip file for you.
http://tinyurl.com/2bc5b6r
Georgegreco86(thread here) made this awesome image (below) and it works perfectly.... but some times there are some complications that happen that i cover below.
TO GET IN TO DOWNLOAD MODE
I have found the EASIEST WAY to do this (IMO) is
1.pull the battery out of the phone.
2.plug usb into computer
3.put the battery back in the phone
4.hold in the volume up and down
5.plug usb in to phone
it should bring you to the download mode in seconds.
now you should unplug the usb.. make sure the battery stays in, and open odin.
now follow georgegrecos instructions.
Some people have said to load the files (PIT and TAR) before reconnecting the phone to the computer so that is how I did it and it worked perfect.
IF YOU RUN IN TO PROBLEMS!
If your phone is not connecting to odin.It might be because you need the correct drivers, thanks to TGA_Gunnman they are located here http://forum.xda-developers.com/showthread.php?t=728929.
I was able to just let the computer search for them and with a few clicks, had the drivers installed.
To install the Android USB driver on Windows Vista for the first time:
1. Connect your Android-powered device to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard.
2. Select "Locate and install driver software."
3. Click "Next." Vista may prompt you to confirm the privilege elevation required for driver installation. Confirm it.
Freezing on "cache.rfs"
searching on google i found a website called fractionalphones.com, the post was about this and it said what i had to do was reboot my computer and hit F8 (just keep touching it) and when it gets to the "safemode screen" arrow down to "Disable Digital Signature Verification"
Also a problem i had was the usb port i was using... so if it does not work try a new port!
Click to expand...
Click to collapse
Perfect,thanks.Previous to the J16 OTA update,I just held volume down/power.
I flashed back to stock to make sure I'd get the update without a hitch,which I did.
trunkstar1 said:
That did help, thanks. And, with some help from other XDA forumers I got the right drivers installed and I'm in motion now. Thanks again.
Click to expand...
Click to collapse
Coolness! Pass on the knowledge!
This is the same method I tried last night. Mine wont get past the bootup sequence. any help?
wicked1lbc said:
This is the same method I tried last night. Mine wont get past the bootup sequence. any help?
Click to expand...
Click to collapse
Try re-downloading the files and doing it again, maybe you got a bad file or something? This should work and if it does not... like I said I'm brand new to this, I had a problem figured out how to fix it and figured share the info, if it does not work for you, hopefully someone with more knowledge will chime in.
The tinyurl link you posted is bad. Looks like too many people have downloaded and the account is suspended :/ can someone upload them to somewhere else? I really need them
hiddengopher said:
The tinyurl link you posted is bad. Looks like too many people have downloaded and the account is suspended :/ can someone upload them to somewhere else? I really need them
Click to expand...
Click to collapse
this is correct, i do not need this right now but it would be nice to have
Hey guys, I am new at this My status stays at file analysis. My phone is in download mode as well.
SORRY! i have been away from the computer for a few days :-/
go to this thread
http://forum.xda-developers.com/showthread.php?t=732458
it has all the info you will need AND THEN SOME! it has the proper files and a little instruction spot with it... plus that one gives your the update.
if you still have trouble come back and i will try to help!
rcanela1 said:
Hey guys, I am new at this My status stays at file analysis. My phone is in download mode as well.
Click to expand...
Click to collapse
try switching usb ports.. i remember that happening to me.. i dont remember what i did tho haha.
im sure a google search will help with that one thats what i did
Hello to you all I am making this flashing tutorial since I have seen enough people asking how to flash using this tool.
This tutorial will be 100% detalied and noob friendly, with pictures. So fasten your seatbelt and let's go.
1. Disclaimer:
Code:
I am not responsible for bricked devices, dead SD cards, thermonuclear war,
or you getting fired because the alarm app failed. Please do some research if you have any
concerns about all contained in this tutorial before you follow it! YOU are choosing to
make these modifications, and if you point the finger at me for messing up your device,
I will laugh at you. But since i'm a nice dude i will try to guide you anyway:)
2. General info:
This can be used to flash a new firmware that you will download from LG firmware website. You can upgrade/downgrade your current version.
This can be used for every situation that can get you in a working Emergency mode/Download mode.
This will work/not work (I didn't test) on versions grater than Windows 7 both 32 and 64 bit. I am not going to give support to Windows 8/Windows 8.1. If it works for you it's nice. If not I will ignore the posts like "What can I do not working on Windows 8" and so on. Same thing goes for WINE (windows loader for LINUX). Use this with Windows XP or 7.
3. What we need and getting ready:
a. Firstly, we need the Drivers for our Phone. The drivers I am attaching must be universal for LG but if they do not work for you then you need to search the drivers the manufacture made for your device.
Universal Driver for LG (TRY THIS FIRST BEFORE YOU GO AND DOWNLOAD FROM LG WEBSITE): LG Drivers.
Install the driver (the one I provided first). If your phone is not detected then search on LG website.
*If the ones I provided don't work you can fine the ones for your phone here: http://www.lg.com/. Search in the right up corner the model of your device. Select it. At download section (in the right of the mini-phone picture) you will see Software Updates & drivers. Select that and download the USB Drivers for Windows.
b. Secondly, we need the KDZ image that you want to flash. I am not going to provide any; you will download the one that you want FOR YOUR DEVICE (do not use any KDZ not intended for your device) from here: http://lg-phone-firmware.com/.
Press on the phone you have and download the image you want.
c. In the third place you want to download the tool: LG Flash Tool 2014.
*You need Winrar or 7Zip or any unraring program. Unrar it.
4. The actual flashing:
A)YOUR PHONE SHOULD BE IN EMERGENCY/DOWNLOAD MODE. The keys to do this are different from device to device so search the forums for your key combination. I will provide the way to get in Emergency for the L7 II and maybe L5 II and L3 II. Think this is the same for the first gen devices but can't confirm.
*With the phone turned off (I suggest to pull out battery for 5 seconds then put it back to be sure) hold Volume Down button and plug the USB cable that you have in your PC. If this doesn't work try holding Volume Down + Volume Up and plug the USB. If this doesn't work search the forums. You might also have a hard bricked device and this method won't work then.
B)Place the KDZ file you downloaded the 3.b. in the same folder that you unrared at 3.c. and Run as Administrator. (BE SURE TO HAVE THE KDZ FILE IN THE SAME FOLDER AS THE TOOL. The file i took for example is "Stock JB ROM.kdz").
*If you can't open this program then you need to instal this: C++ Libraries.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C)This will appear. Leave all the way it is and press the little folder in the right.
D)Select the KDZ you placed at point 4.B. and press Open (DO NOT SELECT RA or RC KDZ).
E)After you pressed Open you are back to the main screen you saw at point 4.C. Good.
Press Normal Flash (the left option) if you want to flash new KDZ preserving data (no data will be deleted). I do not suggest this because you might get a bootloop and you need to hard-reset (will wipe data). Always have all data backed-up.
Press CSE Flash (recommended) if you want to flash new KDZ with full wipe of data.
After selecting what you want you will get this screen.
Press START.
D)After you pressed START you will get this. DO NOT CHANGE ANYTHING, press OK.
E)Another dialog will pop and will flash your phone. First it will check USB connection but you already have USB connected when you got in Emergency so you should be fine. I assume you checked drivers at the Driver step so I assume there will be no problems.
IMPORTANT: DO NOT EVER DISCONNECT THE DEVICE EVEN IF YOU THINK IT'S STUCK, THE WINDOW GOT BLOCKED, IT DOESN'T SHOW ANYTHING OR ANYTHING ELSE. YOU CAN DESTROY YOUR DEVICE DO NOT UNPLUG AFTER YOU PRESSED OK AT STEP 4.D. WHEN THE DEVICE REBOOTS LEAVE THE USB IN FOR 2 MORE MINUTES THEN YOU CAN UNPLUG.
F)In some cases you might get a bootloop after 4.E. is completed. All you have to do is hard reset your device. Search the forum for specific hard-reset procedure. In P710 it's like this: with powered off device hold Volume Down + Home button and press Power. When you see LG logo stop holding Power. Keep other 2 buttons until you see android guy.
That's all folks and now the credits:
@quangnhut123 - He made this tool for us
me - Well I wrote this haha.
If you like it please consider donating. Thanks ^.^. Also do not forget to at least press THANKS button.
plss,in the CSE mode it stopped at extracting software @32/33% and said check the status of your pc and retry then in normal mode @ 33% it stopped showing the percentage signal but still displaying extracting software..
daniels1221 said:
plss,in the CSE mode it stopped at extracting software @32/33% and said check the status of your pc and retry then in normal mode @ 33% it stopped showing the percentage signal but still displaying extracting software..
Click to expand...
Click to collapse
Do not remove the phone. It can stuck. Let it stay if it doesn't give an error.
works on Windows 8.1
Unable to update maybe connection error
i have attached screenshts . my device is connected as device manager says but still connection error. okease help
Trying to fix my LG Optimus L5 II
Hi guys, i'm having troubles with this method, tried both on win8.1 and 7 and i can't find a solution, maybe my phone is gone forever.
My problem is bootloop, and the phone isn't unrooted or modded in any way.
I'll explain what i tried:
-Hard reset (volume down+quickbutton+powerbutton) -> it only keeps vibrating an never showing the LG logo, when i release the buttons it just starts as normal (obviously bootloops).
-Update recovery with LGMobile Support Tool -> phone connects, firmware finish download, and then when it starts updating it just stops and says update failed for some reason.
-Flashing with LG Flash Tool 2014 -> It crashes after the extraction, maybe when it starts to flash.
thank you so much!!!
okay so, i made an account just so i could thank you for this tutorial and the software.
My LG L5 II (e460) was stuck in a bootloop and a hard reset did nothing for me. When i tried another flashing tut i got an error when the files were extracting in the lg mobile support tool. With yours i got the same error when i tried a flash with a full wipe of data to avoid the now dreaded bootloop. However when i tried a flash without loss of data it did actually do its job well. I work on a 64 bit with windows 8.1 computer btw. Once completed it did not give me a bootloop so it actually turned on, and thats a first in a long time. After that i did do a hard reset and now its as new.
So thank you thank you thank you! Thanks to this tut i am now able to gift my dad my once broken phone as if it just came out of the packaging!
honeyybagel said:
okay so, i made an account just so i could thank you for this tutorial and the software.
My LG L5 II (e460) was stuck in a bootloop and a hard reset did nothing for me. When i tried another flashing tut i got an error when the files were extracting in the lg mobile support tool. With yours i got the same error when i tried a flash with a full wipe of data to avoid the now dreaded bootloop. However when i tried a flash without loss of data it did actually do its job well. I work on a 64 bit with windows 8.1 computer btw. Once completed it did not give me a bootloop so it actually turned on, and thats a first in a long time. After that i did do a hard reset and now its as new.
So thank you thank you thank you! Thanks to this tut i am now able to gift my dad my once broken phone as if it just came out of the packaging!
Click to expand...
Click to collapse
You are welcome my friend. Usually this tool has problems on windows 8.1 (the errors you are talking about). With a Windows 7 machine works from first try. I am satisfied that I made your day. Peace out
Firstly - nice tutorial,really! Secondly - Why "LG firmware Updater Tool 2014" not "KDZ Firmware Updater" ? They are almost the same. And thirdly - from my expirience with KDZ reflashing on P713(was stuck with bootlogo), and also from 4pda comments, it's better to turn Emergency mode on phone(Vol.Down and then insert USB)(e.g. "Bootloader" mode isn't so easy to turn on as "Emergency"), - and Choose "Emergency" or "CS_Emergency" not "Diag" one) on step 4C. Also,if You're goin' to flash NON-cdma phone(as I know usually L7-ll isn't cdma),on step 4C it's better to choose "3gqct" not "cdma". And the last one - it should work on win8,but shouldn't work correctly via Windows 10 or Wine.
Have a nice day))
DS_katauri said:
Firstly - nice tutorial,really! Secondly - Why "LG firmware Updater Tool 2014" not "KDZ Firmware Updater" ? They are almost the same. And thirdly - from my expirience with KDZ reflashing on P713(was stuck with bootlogo), and also from 4pda comments, it's better to turn Emergency mode on phone(Vol.Down and then insert USB)(e.g. "Bootloader" mode isn't so easy to turn on as "Emergency"), - and Choose "Emergency" or "CS_Emergency" not "Diag" one) on step 4C. Also,if You're goin' to flash NON-cdma phone(as I know usually L7-ll isn't cdma),on step 4C it's better to choose "3gqct" not "cdma". And the last one - it should work on win8,but shouldn't work correctly via Windows 10 or Wine.
Have a nice day))
Click to expand...
Click to collapse
It is not cdma but doesn't have any impact. I can flash from emergency with Diag Mode also since the LG Modem is picked up in device manager in Emergency, so it should work.. Also I said that phone should be in emergency
neutrondev said:
Hello to you all I am making this flashing tutorial since I have seen enough people asking how to flash using this tool.
This tutorial will be 100% detalied and noob friendly, with pictures. So fasten your seatbelt and let's go.
....
Click to expand...
Click to collapse
Hello mate. Thank you for the tutorial. It's now very easy using LG Flashtool 2014.
All of the instructions worked for my L7 II P714. Now I have a clean stock JellyBean rom without the silly customizations from the Operator.
This L7 II has a very nice camera!
I got the clean JB KDZ from here:
HTML:
JellyBean V10E_00
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW54TARE02PNAJ2373E0W7A/V10E_00.kdz
It's from Panama.
Cheers.
- Leonardo
Thanks!
This project is now discontinued. Peace out.
Sent from my LG-D855 using XDA Free mobile app
Help me!
so i have an lg optimus l9 2 and it's stuck on boot loop i followed every step carefully but the lg phone software website does not work! i can't search for anything so i can't get the kdz required to fix this problem can anyone provide a link where i can find the right kdz for my lg optimus d605 model from germany? thanks :good:
The tool works 100% on Windows 10 (Pro, 64-bit, Creators Update). You don't need any special drivers, they are built into Windows 10.
Update:This tutorial might no longer be valid. It was meant for stock to lollipop beta. Now there is a stable update. Please check needrom website for latest updates.
Disclaimer: This is a lengthy process with downloads of up to 2GB or more required. This is based on my understanding of machine translated Chinese web pages and forums. This process was done on my own ZTE Nubia Z7 Max and it now successfully runs the Google Play Store on Lollipop. The Lollipop version is only 5.0. Please take caution in reading instructions, I take no responsibility if you end up with a bricked phone due to various reasons (improper downloads, power failure or thermo-nuclear war)
Note: You cannot easily go back to Kitkat after this process, please be sure that you want Lollipop. I have not faced any issues with the Lollipop Update, but just letting you know.
Background:
I have a Z7 Max with Nubia OS v1.59 (Kitkat 4.4.2) and I found out from another forum that a Lollipop version v2.13 (Official) is available. This is the process I followed:
Pre-requisites:
A ZTE Nubia Z7 Max (model: NX505J, Hardware Version: NX505JMB_A)
Windows PC (I did this on Windows 7 64-bit)
Drivers installed (When the phone is connected, it will appear under device manager as "Android Sooner Single ADB Interface")
Step 1: Upgrade to v 1.64
The update to V 2.13 can only happen from v 1.64. So first you have to get to v 1.64, if you are not already on it.
Download the v1.64 update zip (requires sign up at Need ROM)
Using the stock recovery update the phone through normal process
Copy update zip to SD Card
Apply update from SD Card etc. etc.
There will be no reset of data and apps, however you will lose Google Play Store/ Services connectivity and Root. It hardly matters as the phone will be reset in the next few steps.
Your phone must be on v1.64 now.
Step 2:Enable ADB and Factory ports
Open your dialer and input *#7678#
You will see two check boxes Factory[] and Adb[]
Check both
Step 3: Download the update file and update tool
Extremely Important: The update from Kitkat to Lollipop will reset the device as the partition is re-written. This is why the tool is required. (No the update cannot be flashed using a custom recovery)
Updater Tool
Download Link
Password: uslf
The v2.13 Lollipop update
Download Link
Password: 5u93
Note:
The above file might require you to sign up to Baidu and install their application to download large files. While registering for Baidu, you might be faced with a Chinese CAPTCHA. Use LINE Dict to draw the characters you see and solve the CAPTCHA
This will be a .tar file (use a utility like 7zip to extract the entire contents into a single folder "NX505J_CNCommon_V2.13")
Step 4: Using the update tool to update v1.64 to v2.13
Run the "nubia NX505J Updater V1.5.7.exe" installer
It will install the updater tool on your PC under "nubia NX505J Updater"
Run the updater tool from your All Programs menu
If you have all the drivers installed and ports enabled, the phone icon in the bottom will have a white tick mark in green bubble, else it will show an exclamatory mark (!) in red bubble. If red, please check drivers (use the driver installer that comes with phone, appears as CD Drive) and that ports are enabled
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click the top button after "C:\Nubia Backup" and browse to the NX505J_CNCommon_V2.13 folder
Only when you have a tick icon and the folder selected, press the bottom button (to the right of "0/100")
This click will reset the device so please proceed with caution
The process will start and the phone will restart several times.
After this process you should have a working Lollipop Installation. (about 3-4 minutes)
Note:The process will stop at 92% for some time, don't worry about this, don't touch the phone or computer!!
I have linked to the Chinese official instructions from the Nubia marketing team below
Step 5: Using Temporary Recovery to Flash Gapps
On the Computer
Download the Recovery exe from This link here (Filename: Z7max_2.13_Android _5.0_CWM recovery.exe)
Running this file will give you a terminal screen with 10 options.
Press Option "2" - I don't know what it does, but the phone will reboot - Probably the bootloader is unlocked.
Connect your phone and copy to the SD card the Gapps package: I used the pico pack from Paranoid Android thread here
After copying the file to SD card, press option "5" - This boots the phone into temporary recovery
In the recovery:
Second option is to flash zip from SD card
Select your file from the SD card
Select the second line on next screen (This is probably - No, - Yes, Flash Zip options)
Gapps gets installed
Go back to main screen of recovery and select first option, you will be presented with two options, Reboot and Reboot Recovery, choose second option to get to Lollipop with Google Play store installed.
Root
Follow the same process to get root by flashing the SuperSu zip through the temporary recovery
Link to the SuperSu: Here
Reference
Lollipop Update Thread: http://bbs.nubia.cn/thread-419364-1-1.html
How to use the Update Tool: http://bbs.nubia.cn/thread-418088-1-1.html
Need ROM Page for v2.13: http://www.needrom.com/download/z7-max-2-13-android-5-beta_eng_chi/
Another recovery article (which I did not use): http://bbs.nubia.cn/thread-417675-1-1.html
Thanks
To Google: For all the wonderful Android ecosystem and For Google Chrome's translate option that helped me understand Chinese website (A few laughs at some of the translations)
The bbs.Nubia.cn forum where all the action happens
Need ROM for some of the crucial downloads in this article
XDA Forum for teaching me a lot about ROMs, Recoveries, and Roots
This is my first elaborate tutorial, I hope you like it. Please help out with "Thanks"
Things I have noticed over two days of usage :
Good:
Pretty good battery life
Smooth transitions
Bad :
The infrared control app is no longer available, nor do the apps from the play store work. Due to lack of permissions to the IR blaster.
Missing one - hand setting that allowed to use the large screen as small screen to left or right.
Home screen looks like from a small screen phone. Fonts in apps like Whatsapp etc. Look very large. Making the phone not feel like full HD resolution.
craagz said:
Things I have noticed over two days of usage :
Good:
Pretty good battery life
Smooth transitions
Bad :
The infrared control app is no longer available, nor do the apps from the play store work. Due to lack of permissions to the IR blaster.
Missing one - hand setting that allowed to use the large screen as small screen to left or right.
Home screen looks like from a small screen phone. Fonts in apps like Whatsapp etc. Look very large. Making the phone not feel like full HD resolution.
Click to expand...
Click to collapse
sure，the ppi was changeed to 400
Good tutorial. But Nubia v2.13 still pretty much need a lot of improvements. I will wait for CM12 to be ported over properly than going for Nubia OS.
When flashing the 2.13 using the flashing tool, i get stuck at 15% where it says switching to download mode. My phone turns off and only the right backlit dot is lighted up. I looked over on the nubia forums and the said it could be because i hadnt turned off my antivirus software, so I went ahead and turned it off but it was the same. I even tried on another computer but same error.
Anyone know whats wrong?
Happened upon your post while I was looking to resolve my gapps issue from my upgrade to 1.64 and now 2.13. Had someone translate the chinese menu for me earlier today when I needed to use the stock recovery. Hope this helps everyone else.
Did not realize the bootloader needs to unlocked before can apply the gapps again. -_- Going to give it a shot now, thanks!
encountering data problem
I have data connection problem in ZTE Nubia Z7 max. I put 2 sim cards in 2 slots. When I change my default data connection to second sim slot, 1st sim carrier signal is lost. 1st signal is recovered when I changed the data connection to sim 1. Does anyone encounter this problem? In HTC Desire 826 dual sim phone, they are no encountering that problem. What is the cause of the problem? If anyone knows how to fix this, please help me.
pilililo2 said:
When flashing the 2.13 using the flashing tool, i get stuck at 15% where it says switching to download mode. My phone turns off and only the right backlit dot is lighted up. I looked over on the nubia forums and the said it could be because i hadnt turned off my antivirus software, so I went ahead and turned it off but it was the same. I even tried on another computer but same error.
Anyone know whats wrong?
Click to expand...
Click to collapse
Did you enable the fastboot and adb mode?
craagz said:
Did you enable the fastboot and adb mode?
Click to expand...
Click to collapse
How do I enable fastboot?
What i did enable was factory port and adb port.
Isnt fastboot supposed to be enabled by default on all phones?
pilililo2 said:
How do I enable fastboot?
What i did enable was factory port and adb port.
Isnt fastboot supposed to be enabled by default on all phones?
Click to expand...
Click to collapse
Did you go up to 1.64 before trying to flash the 2.13?
I know it is a bit late, but how is your phone doing?
Yes i did go to 1.64 before flashing. Didnt work though.
Right now im on the 14/4/2015 version of Cm12 which is very nice. Although i couldnt merge partitions which i would like to be able to do.
8Gb
Hi, here is the thing, i flash stock recovery 5.0 and make manual update to 3.08 (first guide on needrom), after flash TWRP v2.8.6.0 gaps etc. I have only 8gb memory ROM+ apps. And finnaly my question is: when i will use this Updater Tool, may i get full 32gb space please? Thx a lot for every help.
can this be done from 1.64 custom such as bb72 or must it be stock
Help please
Help me I can not seem
craagz said:
Disclaimer: This is a lengthy process with downloads of up to 2GB or more required. This is based on my understanding of machine translated Chinese web pages and forums. This process was done on my own ZTE Nubia Z7 Max and it now successfully runs the Google Play Store on Lollipop. The Lollipop version is only 5.0. Please take caution in reading instructions, I take no responsibility if you end up with a bricked phone due to various reasons (improper downloads, power failure or thermo-nuclear war)
Note: You cannot easily go back to Kitkat after this process, please be sure that you want Lollipop. I have not faced any issues with the Lollipop Update, but just letting you know.
Background:
I have a Z7 Max with Nubia OS v1.59 (Kitkat 4.4.2) and I found out from another forum that a Lollipop version v2.13 (Official) is available. This is the process I followed:
Pre-requisites:
A ZTE Nubia Z7 Max (model: NX505J, Hardware Version: NX505JMB_A)
Windows PC (I did this on Windows 7 64-bit)
Drivers installed (When the phone is connected, it will appear under device manager as "Android Sooner Single ADB Interface")
Step 1: Upgrade to v 1.64
The update to V 2.13 can only happen from v 1.64. So first you have to get to v 1.64, if you are not already on it.
Download the v1.64 update zip (requires sign up at Need ROM)
Using the stock recovery update the phone through normal process
Copy update zip to SD Card
Apply update from SD Card etc. etc.
There will be no reset of data and apps, however you will lose Google Play Store/ Services connectivity and Root. It hardly matters as the phone will be reset in the next few steps.
Your phone must be on v1.64 now.
Step 2:Enable ADB and Factory ports
Open your dialer and input *#7678#
You will see two check boxes Factory[] and Adb[]
Check both
Step 3: Download the update file and update tool
Extremely Important: The update from Kitkat to Lollipop will reset the device as the partition is re-written. This is why the tool is required. (No the update cannot be flashed using a custom recovery)
Updater Tool
Download Link
Password: uslf
The v2.13 Lollipop update
Download Link
Password: 5u93
Note:
The above file might require you to sign up to Baidu and install their application to download large files. While registering for Baidu, you might be faced with a Chinese CAPTCHA. Use LINE Dict to draw the characters you see and solve the CAPTCHA
This will be a .tar file (use a utility like 7zip to extract the entire contents into a single folder "NX505J_CNCommon_V2.13")
Step 4: Using the update tool to update v1.64 to v2.13
Run the "nubia NX505J Updater V1.5.7.exe" installer
It will install the updater tool on your PC under "nubia NX505J Updater"
Run the updater tool from your All Programs menu
If you have all the drivers installed and ports enabled, the phone icon in the bottom will have a white tick mark in green bubble, else it will show an exclamatory mark (!) in red bubble. If red, please check drivers (use the driver installer that comes with phone, appears as CD Drive) and that ports are enabled
Click the top button after "C:\Nubia Backup" and browse to the NX505J_CNCommon_V2.13 folder
Only when you have a tick icon and the folder selected, press the bottom button (to the right of "0/100")
This click will reset the device so please proceed with caution
The process will start and the phone will restart several times.
After this process you should have a working Lollipop Installation. (about 3-4 minutes)
Note:The process will stop at 92% for some time, don't worry about this, don't touch the phone or computer!!
I have linked to the Chinese official instructions from the Nubia marketing team below
Step 5: Using Temporary Recovery to Flash Gapps
On the Computer
Download the Recovery exe from This link here (Filename: Z7max_2.13_Android _5.0_CWM recovery.exe)
Running this file will give you a terminal screen with 10 options.
Press Option "2" - I don't know what it does, but the phone will reboot - Probably the bootloader is unlocked.
Connect your phone and copy to the SD card the Gapps package: I used the pico pack from Paranoid Android thread here
After copying the file to SD card, press option "5" - This boots the phone into temporary recovery
In the recovery:
Second option is to flash zip from SD card
Select your file from the SD card
Select the second line on next screen (This is probably - No, - Yes, Flash Zip options)
Gapps gets installed
Go back to main screen of recovery and select first option, you will be presented with two options, Reboot and Reboot Recovery, choose second option to get to Lollipop with Google Play store installed.
Root
Follow the same process to get root by flashing the SuperSu zip through the temporary recovery
Link to the SuperSu: Here
Reference
Lollipop Update Thread: http://bbs.nubia.cn/thread-419364-1-1.html
How to use the Update Tool: http://bbs.nubia.cn/thread-418088-1-1.html
Need ROM Page for v2.13: http://www.needrom.com/download/z7-max-2-13-android-5-beta_eng_chi/
Another recovery article (which I did not use): http://bbs.nubia.cn/thread-417675-1-1.html
Thanks
To Google: For all the wonderful Android ecosystem and For Google Chrome's translate option that helped me understand Chinese website (A few laughs at some of the translations)
The bbs.Nubia.cn forum where all the action happens
Need ROM for some of the crucial downloads in this article
XDA Forum for teaching me a lot about ROMs, Recoveries, and Roots
This is my first elaborate tutorial, I hope you like it. Please help out with "Thanks"
Click to expand...
Click to collapse
Bro after flashing version 1.64 using custom rom my phone not detecting any cdma/gsm network on first slot . I also tried to downgrade it with version 1.29 fastboot rom from needrom but still it don't show network.
Do you have any idea how to enable my first slot working.
Also I am unable to install v2.13 because update tool show modem version mismatch and don't proceed I want to resolve my network issue please share something to help me..
sandycool123 said:
Bro after flashing version 1.64 using custom rom my phone not detecting any cdma/gsm network on first slot . I also tried to downgrade it with version 1.29 fastboot rom from needrom but still it don't show network.
Do you have any idea how to enable my first slot working.
Also I am unable to install v2.13 because update tool show modem version mismatch and don't proceed I want to resolve my network issue please share something to help me..
Click to expand...
Click to collapse
You probably lost your IMEI. Read this Chinese tutorial to restore it.
Yes I have lost my meid now my phone showing only 2 imei no meid -00000
I reached at last of your tutorial link but i am unable to create meid for my handset as i don't. No my meid also its no where on phone and box as well .so can i create my meid using the 2 imei.
I have backup its nv.qcn but not understanding this how to edit nv.qcn to write meid .
Please help me . I have 3 phones in this condition.
Thanks.
Thanks! did it and everything works good.
it seems now that the CWM is flashed on my device.
If there will be a newer version, will I be able to update it via FOTA?
or I should flash stock recovery?
entdoc said:
can this be done from 1.64 custom such as bb72 or must it be stock
Click to expand...
Click to collapse
No need to be on 1.64 stock
Actually I was able to do the upgrade from 1.64 bb72. I used the nubia tool which resizes the partitions and 2.13 stock. Then to 3.08 bb72.
It may even be possible to skip the step with 2.13 using the tool . If anyone has done it please advise
I tried to flash latest rom from Asus website to my new Zenfone C because it had a weird issue, it came the user interface in taiwanesse, but when trying to change to english, it stayed in taiwanesse, so I wasnt able to setup it in first place.
Then, it came to my mind to flash the latest rom, and I used this guide in absence of a Zenfone C guide for flashing:
http://en.zenfoneasus.com/zenfone-recovering-returning-stock-rom-downgrade-clean-update-guide/
I did all the steps listed there first, and then tried the steps but with the red marked steps, flashing the dnx and ifwi also, no result.
The problem is that now im stuck in a bootloop, and cant advance from there, the Asus logo stays there forever.
What happened during flashing is this:
When I sideloaded the update.zip containing latest rom from Asus website, it said:
-Installing update
-Device image SKU: ww
OTA image SKU: WW
and suddenly after that it restarted, showed a huge Intel Inside logo that I never saw and then went to the dead android image. After waiting a while, the phone restarts, this time only showing the Asus logo with the Intel Inside logo beneath it (not the Intel Inside logo only that I mentioned earlier), and stays there forever.
I dont know what else to do, I dont know if Im doing something wrong.
Were you ever able to fix the problem?
No, until now, no
Sent from my Nexus 5 using Tapatalk
Solved!!!
Hey Spartan!
I was searching online about nexus 5 to buy one but I found something else randomly in an Indonesian blog and was able fix my phone! Hardly took about 15 minutes
I will be posting the solution soon... I hope you are still in need?
kkdevta said:
Hey Spartan!
I was searching online about nexus 5 to buy one but I found something else randomly in an Indonesian blog and was able fix my phone! Hardly took about 15 minutes
I will be posting the solution soon... I hope you are still in need?
Click to expand...
Click to collapse
I still need the fix man, I will really appreciate the posting of the solution! thanks in advance!
Sent from my Nexus 5 using Tapatalk
The Fix!
First Download: -
USB Drivers: http://www.asus.com/in/Phones/ZenFone_C_ZC451CG/HelpDesk_Download/
Asus Flash Tool v1.0.0.11: https://drive.google.com/file/d/0B7cZB2l2IKlKMENKUWlVaHJ3ZHM/view
Signed Rom zip image: https://drive.google.com/file/d/0B__oiYlSY-brdHFWMy1OWXNrajg/view
The Process: -
Get your phone to boot into fastboot mode by pressing [vol -] button and power button simultaneously for few seconds.
Connect to your PC and install USB drivers if not done already. The phone should show up as an "ASUS Android Composite ADB Interface" in the Device Manager.
Now, open ASUS Flash Tool :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It should detect your phone with serial number and blue orb in front of it.
Select your phone model i.e. ZC451CG
Choose if you want to wipe data or not. I chose "Wipe Data" since I had everything backedup on asus web storage.
Click that box icon and browse for the signed zip image file you downloaded earlier.
Select your device on the ASUS flash Tool by clicking on the serial number like shown in the picture below.
( It had me scratch my head after one failed attempt because I didn't select it the first time! :silly
Click on the green start button, be patient, stay calm and cross your fingers. This could take 10-20minutes or so.:fingers-crossed:
If everything went well your phone should bootup to the welcome screen like the day 1 you got it.
Now, the zip image is quite old so after the initial setup the phone would prompt you with lots of system and app updates. Go with it and enjoy! :victory:
Lastly, don't be shy of pressing that " :good:Thanks! " button if this post helped you.
Thanks man, I will try tonight. Do you know if this works under Windows 8.1 64bits??. I see the screenshots are from windows 7.
Spartan Legionnaire said:
Thanks man, I will try tonight. Do you know if this works under Windows 8.1 64bits??. I see the screenshots are from windows 7.
Click to expand...
Click to collapse
Hopefully it should, I did it on a Windows 7 Professional 64 bit machine.
The USB drivers you download has Windows 8 drivers in it. I think that's all that is needed.
Yeah, I will try it then, and report back, thanks again.
Sent from my Nexus 5 using Tapatalk
kkdevta said:
First Download: -
USB Drivers: http://www.asus.com/in/Phones/ZenFone_C_ZC451CG/HelpDesk_Download/
Asus Flash Tool v1.0.0.11: https://drive.google.com/file/d/0B7cZB2l2IKlKMENKUWlVaHJ3ZHM/view
Signed Rom zip image: https://drive.google.com/file/d/0B__oiYlSY-brdHFWMy1OWXNrajg/view
The Process: -
Get your phone to boot into fastboot mode by pressing [vol -] button and power button simultaneously for few seconds.
Connect to your PC and install USB drivers if not done already. The phone should show up as an "ASUS Android Composite ADB Interface" in the Device Manager.
Now, open ASUS Flash Tool :-
It should detect your phone with serial number and blue orb in front of it.
Select your phone model i.e. ZC451CG
Choose if you want to wipe data or not. I chose "Wipe Data" since I had everything backedup on asus web storage.
Click that box icon and browse for the signed zip image file you downloaded earlier.
Select your device on the ASUS flash Tool by clicking on the serial number like shown in the picture below.
( It had me scratch my head after one failed attempt because I didn't select it the first time! :silly
Click on the green start button, be patient, stay calm and cross your fingers. This could take 10-20minutes or so.:fingers-crossed:
If everything went well your phone should bootup to the welcome screen like the day 1 you got it.
Now, the zip image is quite old so after the initial setup the phone would prompt you with lots of system and app updates. Go with it and enjoy! :victory:
Lastly, don't be shy of pressing that " :good:Thanks! " button if this post helped you.
Click to expand...
Click to collapse
IT WORKEEEED!!!! I dont know how to thank you man!. Thank you so much, I was going to give up on this device!. Its working really well.
The only thing I came into trouble, was to install the USB drivers included in the Asus Flash Tool. I did the following (on Windows 8.1 64bits):
I disabled driver signature check first on windows.
I went to the USB drivers folder inside the ASUS Flash tool folder on Program Files.
I went here C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller\devcon\x64
On that folder, there is a program called devcon.exe, right click on it, and select properties.
On compatibility tab select Run as Administrator, click ok.
After this, reinstall USB drivers by going to C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller and here execute install_drivers.bat
Thats it, the phone now should be recognized by the Asus Flash Tool.
I always failed when downloading Signed Rom zip image.. Someone please provide mirror... Thanks
Tjecing said:
I always failed when downloading Signed Rom zip image.. Someone please provide mirror... Thanks
Click to expand...
Click to collapse
Use a download manager like "free download manager" or something. I am on a slow network to re-upload it else where.
kkdevta said:
Use a download manager like "free download manager" or something. I am on a slow network to re-upload it else where.
Click to expand...
Click to collapse
I don't know how to thank You.. But thanks a lot you safe my days..
Can any one plz give me the link of any custom recovery for asus zenfone c.....i badly need it plz help me...thnks in advance.....plz give me..and tell me how to flash it.....
do you know where i can find the correct .raw file for asus zenfone 5 A501CG ? i use lollipop, i dont know if that's matter =s
Anyone help me When I press volume- and power, it can't enter to fastboot. And when I plug the cable, the flash tool can't detect it
Sent from my Mi 4i using XDA Free mobile app
hello brother...can you help me...
my zenfone 5 a500cg has been softrick and bootloop to...
if i'm turn on my phone
logo asus and then usb logo and then dead again...
i can't log into fastboot(power on+vol up)..
but i can log into cwm philz...
i try flash via adb sideload but always error bla bla bla tmp/updated.zip
if i try other ROM always like this ( please upgrade to image 4.3 first)
i try xftsk but always windriver error( i am use notebook win7)
i try asus flashtool with .raw zip rom but my serial number error just 12345678abcdef...
if i click start always device not detect...
help me bro
disappear3896 said:
Anyone help me When I press volume- and power, it can't enter to fastboot. And when I plug the cable, the flash tool can't detect it
Click to expand...
Click to collapse
power and volume up (+)
Spartan Legionnaire said:
IT WORKEEEED!!!! I dont know how to thank you man!. Thank you so much, I was going to give up on this device!. Its working really well.
The only thing I came into trouble, was to install the USB drivers included in the Asus Flash Tool. I did the following (on Windows 8.1 64bits):
I disabled driver signature check first on windows.
I went to the USB drivers folder inside the ASUS Flash tool folder on Program Files.
I went here C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller\devcon\x64
On that folder, there is a program called devcon.exe, right click on it, and select properties.
On compatibility tab select Run as Administrator, click ok.
After this, reinstall USB drivers by going to C:\Program Files (x86)\ASUS\ASUS Flash Tool\Driver\USBDriverInstaller and here execute install_drivers.bat
Thats it, the phone now should be recognized by the Asus Flash Tool.
Click to expand...
Click to collapse
First and foremost, follow Spartan about how to deal with the driver install error. Read above. Second, those are the links for the raw images:
ww_A500CG_3.23.40.60_20150630.raw and many other phones. It was posted by thanhthuy. 500CG Lollipop: https://mega.nz/#!jwBDUKzJ!x3VD9VJrMe0CBs353DVnXlHr2dHQXepjcqtrR0gQDdU
500CG kitkat:
https://mega.co.nz/#!H8YkyLba!4Ye52JKAjzogGRVvCx2r9XoJIhou_uY3z6YH1xBges8
400CG 6.6.3 - https://mega.co.nz/#!HoRRnLCL!CV-iCMEUgRd_LwDc4QgNkevxKIGOKtFGDYrytt59EVE
400CG 7.3.3 - https://mega.co.nz/#!G8hRwYqR!Eu_l6r_6QSbhjID-MtYQU3v0q0voQ0GYkFeayy-3MFI
451CG: https://mega.co.nz/#!794U1TpT!rermqclZOpPKcYZY8z2YezUkQE-MWjYJgqyKMUAjYDo
600cg Kitkat: https://mega.co.nz/#!S1wlnYhC!doCPvf7ukeEFStcJPgqaEViE5oiHb_hpGSGnIh3n1IQ
Here for 600cg lollipop: https://mega.co.nz/#!3p4wBQAY!KUx26zaGdCBU6CGa4g68zT_iX9NxmIQCUvHiolfa_Oo
ZE550ML Lollipop 40.23 : https://mega.co.nz/#!HgBSySZA!EOxpsmPvHgCfl-9jUVRAv624Uq9LG4uvxuN83j6-P-k
ZE550ML Lollipop 40.40: https://mega.co.nz/#!P4RmXIwb!-xrDe8AYXdprZgUG4Ehs8fLNHhrdKpXdmaV3FBWPC_0
ZE551ML Lollipop: https://mega.co.nz/#!i4JRAQDR!9DzxtSd1oxDuCV6oc0rEhm-1sF4SA-94YPG9fLVw_lw
Source using Google cache (Vietnamese): http://webcache.googleusercontent.com/search?q=cache:w5AS-N1JrAoJ:zenphoneviet.com/threads/all-zen-stock-rom-firmware-kk-l-update-hang-tuan-chay-bang-asus-flash-tool.7066/+&cd=1
---------- Post added at 07:31 AM ---------- Previous post was at 07:29 AM ----------
Those raw files are extremely difficult to find so if you pretend to have any of those phones i recommend to download. It works easily if you have fastboot. If you only have adb i did not saw working but i am trying.
---------- Post added at 07:38 AM ---------- Previous post was at 07:31 AM ----------
If you try to do that under adb they give a serial number mistake.
4 days trying to solve this bootloop using adb. At least one person here saved his phone with the raw links i found using google webcache in this vietnamese link so it was worth it. Looks like i will need to lose 40 days sending to Asus in Sao Paulo. What a hell folks, those asus firmwares are really crap. Set a great hardware for set poor software.
why my phone does not give any reaction when press power button+vol
I had same problem but different situation....I tried to make an experiment by changing systemui and I had done it with a wrong step .lucky I make a backup and tried to recover it.
But Things get worst when it failed to backupbang now my phone get stuck to Asus logo.I tried to follow the method that your all give in this thread but I can go to fastbootode with it must press power button+col down button.
CAN ANYBODY HELP ME WITH THIS PROBLEM
Sorry for my bad English
And I'm a newbie and try to learn something from pro
Hello everyone,
I will share my experience with you, and I hope for a solution!
A few days ago I rooted my Lenovo tab 2 A10-30 successfully using Kingroot. Then, I tried to change Kinguser with SuperSU, which I also successfully did. However, I noticed that although the main root app was SuperSU, Kingroot was still on my phone, so I deleted it using a bloatware removal app and restarted the tablet. Now it won't turn on. It gets stuck at the Lenovo loading screen, and that's about it. When I press the power button + volume down button, it gets me to a Chinese menu that is not the recovery mode (there is no MMC, just options about voloume, colors, mic test etc). If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
I tried flashing the stock ROM using the Smart Phone Flash Tool, but the PC does not recognize fully the tablet (it just prompts me to install the Lenovo USB drivers, and I cannot access the tablet's internal storage). Moreover, the Lenovo windows applications do not recognize the tablet when I connect it to the PC.
I really do hope that there is a way I can fix it.. Thank you all in advance.
Hi,
I did almost exactly the same... Kingroot, tried to remove bloatware with another app, and ended up with a bricked tablet I can still access the bootloader, but flashing the tablet from there is to no avail.
I am still looking for the original ROM, which seems nowhere to be found. Did you, by any chance, make a backup first?
Another one here But I'am able to go into recovery and into adb sideload, from there I can view internal memory(/system). And it looks like system is trying to load supersu-daemon which was removed and it can't get past that. I tried to recover paths (to original ones), but it still wont go past loading screen. (it is just restarting the app_process32).
Now if we only could get the hold on original factory firmware... from there one we can sideload it via fastboot.
And for the drivers you need andorid usb drivers https://developer.android.com/studio/run/win-usb.html#top
TLDR; we are looking for TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip
So, I have spent about 5 hours attempting to find a way to dump the firmware without first rooting the device, so that I could share it with you guys (and have a backup for myself in case I attempt to root it myself.) Unfortunately it seems like it needs to be rooted before I can create a nandroid backup through adb. Unfortunately the tablet is not based on mtk, and I cannot find any qualcomm utils that can dump the firmware.
The one Qualcomm util I found (QFIL) seems like it is only for flashing, and for backing up some individual data for the tablet (I assume it may contain such as license keys for the commercial features in the recent phones such as Sony Xperia Z3). I also looked into fastboot, and that too can only flash a new firmware.
So, unless the tablet gets rooted I don't see any way to make a proper backup.
I am unable to post links in messages, so you need to do some manual editing.
dz0ny said:
TLDR; we are looking for TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip
Click to expand...
Click to collapse
This however seems like very valuable information, unfortunately the only places I can find that has this available for download is charging money for access to the file.
50$ at dlgsm,com www DOT dlgsm DOT com/register.php?file=TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip&dir=%2FFLASH-FILES%2FLENOVO%2FT_Series%2FTB2-X30F
or from 10$ at pars-hamrah,com: www DOT pars-hamrah DOT com/%D8%A7%D8%AE%D8%A8%D8%A7%D8%B1-%D9%85%D8%B1%DA%A9%D8%B2-%D8%AF%D8%A7%D9%86%D9%84%D9%88%D8%AF-%D8%A7%D8%AE%D8%AA%D8%B5%D8%A7%D8%B5%DB%8C-%D9%BE%D8%A7%D8%B1%D8%B3-%D9%87%D9%85%D8%B1%D8%A7%D9%87/38027-%D8%B1%D8%A7%D9%85-%D8%A7%D9%88%D8%B1%D8%AC%DB%8C%D9%86%D8%A7%D9%84-%D9%84%D9%86%D9%88%D9%88-lenovo-tb2-x30f-%D9%86%D8%B3%D8%AE%D9%87-s000015-%D8%A7%D9%86%D8%AF%D8%B1%D9%88%DB%8C%D8%AF-5-1-1-%D8%AF%D8%B1-%D9%85%D8%B1%DA%A9%D8%B2-%D8%AF%D8%A7%D9%86%D9%84%D9%88%D8%AF-%D9%82%D8%B1%D8%A7%D8%B1-%DA%AF%D8%B1%D9%81%D8%AA.html"]Here[/URL]
It might also be available www DOT fars-gsm DOT com/75531-tb2-x30f_usr_s000015_1601151950_q8009_row_qpst-zip.html, at least they list the changelog for the firmware.
Since I have no use for a firmware right now, I will not be buying access to one (unless I at some point manage to brick mine as well). But if anyone decides to do so, please share it so others can enjoy it as well. I also suspect that if the file was available, it would increase the probability of someone attempting to make a custom rom at some point as well, it is a very cheap tablet when on sale, so it should have good potential for a community.
PS: I also stumbled over something called vRoot, that might be an alternative to Kingroot, although I have no idea whether it is as good at rooting and not installing unwanted extra apps. I guess someone who has used it on a tablet/phone that has a backup available might be able to shed some light on that.
---------- Post added at 08:08 PM ---------- Previous post was at 08:02 PM ----------
omrtpsycho said:
If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
Click to expand...
Click to collapse
This is the QFIL (Qualcomm Flash something system) mode, however I do now know whether that helps anything at all. Since it seems to me it probably wont accept the TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip file mentioned in the thread. It seems to expect some xml file, maybe the zip file contains that?
Hi guys i have been strugling with this unit The last 3 days. I have eksakt same problem. I found these files: lenovo-forums.ru/files/category/106-прошивки-lenovo-tab-2-a10-30/
I extracted Them but dont know how to flash Them ?? Hope u guys Can help (sorry for bad english)
To Download files from Lenovo-forums.ru i logged in with my Google account
[PUT ROM TEMPORARILY HERE: https://www.wetransfer.com/download...024ee2974a44f8aa50e3dcd120160615184237/a84735 ]
Wow, suddenly action! With the help of Dead2 and Andersbp I have made some progress. Here are my steps:
I purchased the ROM from the Iranian site, and downloaded the other from the Russian forum. So now I have 2 ROMs:
65M TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip (Russian)
1.1G TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip (Iranian)
The smaller one is simply an update, which you could install easily:
1) boot into Recovery Mode
2) select "Apply Update from ADB"
3) run: adb sideload TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip
Which works... UNLESS YOU ROOTED THE DEVICE. Then it fails, and does not want to update. Thanks Lenovo
So, the larger one is a different type of ROM. This one will not load with adb sideload (gives footprint and signature error). But it DOES contain all the files to flash with QFIL (Qualcomm Flash something system).
Here I'm stuck. I followed this guide:
http://guidebelajar.blogspot.nl/2016/03/guide-how-to-flash-firmware-lenovo-vibe-p1.html
and tried to install these packages:
1) You must download and install USB Driver for Lenovo on your windows computer or PC.
2) QPST-2.7.422-qfil-qcom-Upgrade-Tool-20140422
3) Download Qualcomm HSUSB USB COM Drivers
(Note that you need to register and log in to needrom.com FIRST. Then click the link, but it will give an access error. Remove all in the URL after needrom.com (so go back to the main site), then go back to the download link, and it will work - the file is there.)
1) and 2) install pretty fine, but 3) is just a zip with a lot of drivers, no installer. I have no clue on how to install the proper driver...
Furthermore, the site suggests to install something on the device itself:
5) Create a folder with the name sdfuse in the root of the SD-card phone
6) Put the qsb-firmware (file with the extension .qsb) in the folder sdfuse.
Here I have 2 problems: First, my device does not boot, so I cannot create/copy files. Seconly: I cannot find qsb-firmware.qsb anywhere...
@ Dead2: How did you go through these steps?
Zwartoog said:
I purchased the ROM from the Iranian site, and downloaded the other from the Russian forum. So now I have 2 ROMs:
65M TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip (Russian)
1.1G TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip (Iranian)
Click to expand...
Click to collapse
Great, thanks for sharing the firmware, I hope you and everyone else with a softbricked tablet can get it fixed now
I am sure some of those would be willing to donate a couple of bucks to you if they get theirs working again.
Zwartoog said:
3) Download Qualcomm HSUSB USB COM Drivers
(Note that you need to register and log in to needrom.com FIRST. Then click the link, but it will give an access error. Remove all in the URL after needrom.com (so go back to the main site), then go back to the download link, and it will work - the file is there.)
1) and 2) install pretty fine, but 3) is just a zip with a lot of drivers, no installer. I have no clue on how to install the proper driver...
Click to expand...
Click to collapse
Ok, I used a LenovoUsbDriver_v1.0.12.exe driver installer, and that includes the HSUSB drivers needed, and I can confirm that windows recognizes the tablet as being in HSUSB mode with those. Whether QFIL does I have not tested.
I got the driver package from here: www DOT teamandroiders DOT com/lenovo-usb-drivers-download/
Zwartoog said:
@ Dead2: How did you go through these steps?
Click to expand...
Click to collapse
After you get past installing the HSUSB driver, you are officially the one that has gotten furthest on this.
I will assist in any way I can, but I will not attempt flashing my own tablet until I actually need to
Dead2 said:
After you get past installing the HSUSB driver, you are officially the one that has gotten furthest on this.
Click to expand...
Click to collapse
We'll get this working
Dead2 said:
Ok, I used a LenovoUsbDriver_v1.0.12.exe driver installer, and that includes the HSUSB drivers needed, and I can confirm that windows recognizes the tablet as being in HSUSB mode with those. Whether QFIL does I have not tested.
Click to expand...
Click to collapse
I tried that one too, but to no avail When I try to execute the executable, it ask for administrator permission, and after that vanishes...
I am running Windows 8, 64 bit. You?
Other question: when is your tablet recognised by Windows? Also in Recovery Mode?
Thanks!
Great work so far guys ! I Will try tomorrow with The new information! Mine is rootet so dont look good for me :/
Zwartoog:
The russian site also have Big files (1gb)
You Saw Them ?
Andersbp said:
Great work so far guys ! I Will try tomorrow with The new information! Mine is rootet so dont look good for me :/
Zwartoog:
The russian site also have Big files (1gb)
You Saw Them ?
Click to expand...
Click to collapse
No, I have spent too many hours translating Farsi today, was quite happy to find this one easily accessible on the Russian site
Can you check one of the bigger files? Might come in handy if my version seems incompatible for some reason...
Zwartoog said:
No, I have spent too many hours translating Farsi today, was quite happy to find this one easily accessible on the Russian site
Can you check one of the bigger files? Might come in handy if my version seems incompatible for some reason...
Click to expand...
Click to collapse
Sure Will try tomorrow
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
First i followed this guide:
https://2.bp.blogspot.com/-YxnBnMMx7Xg/VnaiVim76VI/AAAAAAAAURo/pz5IiaVdlcQ/s320/qfil.jpg
But insted of this:
9. Now, enter your Lenovo Vibe P1 into recovery mode. you can do it by :
Press the Volume Up button and keep holding it while connecting it to the computer/laptop using USB cable.
Lenovo Vibe P1 will vibrate one time, and you will see black screen.
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now you can continue with the guide, and use QFIL.
I used this firmware: https://drive.google.com/open?id=0B9affStJ4JQ1U3JXUTZFTDJ6NU0
Extract the rar file. Inside you will find the files needed in QFIL.
Hope this helps you guys
Andersbp said:
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
First i followed this guide:
https://2.bp.blogspot.com/-YxnBnMMx7Xg/VnaiVim76VI/AAAAAAAAURo/pz5IiaVdlcQ/s320/qfil.jpg
But insted of this:
9. Now, enter your Lenovo Vibe P1 into recovery mode. you can do it by :
Press the Volume Up button and keep holding it while connecting it to the computer/laptop using USB cable.
Lenovo Vibe P1 will vibrate one time, and you will see black screen.
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
Now you can continue with the guide, and use QFIL.
I used this firmware: https://drive.google.com/open?id=0B9affStJ4JQ1U3JXUTZFTDJ6NU0
Extract the rar file. Inside you will find the files needed in QFIL.
Hope this helps you guys
Click to expand...
Click to collapse
Super! Will try this tonight. Just in case: which Windows version are you using?
Zwartoog said:
Super! Will try this tonight. Just in case: which Windows version are you using?
Click to expand...
Click to collapse
I use windows 10
Andersbp said:
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
Click to expand...
Click to collapse
Great work! I am glad I was able to help you guys get this fixed
Andersbp said:
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
Click to expand...
Click to collapse
Yep, its at the bottom of my first post also, found that out by accident while trying to get into the normal recovery.
Now, hopefully someone will want to port TWRP and CM13 or Paranoid to this tablet
Doh i did not see that Dead2
Thanks everybody together we defeated the problem !
SUPER! Succes here as well! The trick was indeed to hold both vol UP and DOWN
Now: brand-new unrooted device
Thanks
Btw: I noticed that the rom from Andersbp is a TB2-X30L rather than the TB2-X30F. I used my F file (paid for it, dammit ), and that one also works well.
I am currently checking if I can modify the stock ROM to enable root / mult-user. Any hints?
Nice zwartoog !
I Can root with kingroot.. Are there better alternatives ? Kingroot is Full of bloatware
Andersbp said:
Nice zwartoog !
I Can root with kingroot.. Are there better alternatives ? Kingroot is Full of bloatware
Click to expand...
Click to collapse
Noo, no Kingroot. That's where all the disasters began. It is full of bloatware. Trying to uninstall Kingroot lead to bricking the device
Personally I am only interested in re-enabling the multi-user feature from lollipop. WHICH IS FOR SOME REASON DISABLED BY LENOVO Even when rooted and modifying the system/build.prop did not re-enable it.
I'm giving up now. At least I have a workable device. Restored pride. And more important: 3 happy kids
I think the TB2-X30L is the LTE version of the tablet, while the TB2-X30F is the wifi-only version. If correct, then there should be no problem
when using the LTE on a non-LTE model, but the other way around could potentially cause LTE to not work. The LTE firmware might have some
extra apps and settings enabled to cater to this ability, but it might also be completely identical. Btw, what does the model information say
after being flashed with the L firmware? In any case it is useful to know that they are cross-compatible, since sometimes there can be differences
in chipsets or screens that can cause minor or major problems.
As I mentioned earlier, another root alternative to kingroot seems to be vRoot, but I have not tried it myself. But now that it is possible to
recover a bricked tablet, it is also less risky to test such things.
BTW: Please remember to use the "Thanks!" button on posts you find helpful, I have tried to do so myself on the posts that I find helpful