Lenovo Tab a10-30 bricked or fixable? - Android Q&A, Help & Troubleshooting

Hello everyone,
I will share my experience with you, and I hope for a solution!
A few days ago I rooted my Lenovo tab 2 A10-30 successfully using Kingroot. Then, I tried to change Kinguser with SuperSU, which I also successfully did. However, I noticed that although the main root app was SuperSU, Kingroot was still on my phone, so I deleted it using a bloatware removal app and restarted the tablet. Now it won't turn on. It gets stuck at the Lenovo loading screen, and that's about it. When I press the power button + volume down button, it gets me to a Chinese menu that is not the recovery mode (there is no MMC, just options about voloume, colors, mic test etc). If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
I tried flashing the stock ROM using the Smart Phone Flash Tool, but the PC does not recognize fully the tablet (it just prompts me to install the Lenovo USB drivers, and I cannot access the tablet's internal storage). Moreover, the Lenovo windows applications do not recognize the tablet when I connect it to the PC.
I really do hope that there is a way I can fix it.. Thank you all in advance.

---

Hi,
I did almost exactly the same... Kingroot, tried to remove bloatware with another app, and ended up with a bricked tablet I can still access the bootloader, but flashing the tablet from there is to no avail.
I am still looking for the original ROM, which seems nowhere to be found. Did you, by any chance, make a backup first?

---

Another one here But I'am able to go into recovery and into adb sideload, from there I can view internal memory(/system). And it looks like system is trying to load supersu-daemon which was removed and it can't get past that. I tried to recover paths (to original ones), but it still wont go past loading screen. (it is just restarting the app_process32).
Now if we only could get the hold on original factory firmware... from there one we can sideload it via fastboot.
And for the drivers you need andorid usb drivers https://developer.android.com/studio/run/win-usb.html#top
TLDR; we are looking for TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip

---

So, I have spent about 5 hours attempting to find a way to dump the firmware without first rooting the device, so that I could share it with you guys (and have a backup for myself in case I attempt to root it myself.) Unfortunately it seems like it needs to be rooted before I can create a nandroid backup through adb. Unfortunately the tablet is not based on mtk, and I cannot find any qualcomm utils that can dump the firmware.
The one Qualcomm util I found (QFIL) seems like it is only for flashing, and for backing up some individual data for the tablet (I assume it may contain such as license keys for the commercial features in the recent phones such as Sony Xperia Z3). I also looked into fastboot, and that too can only flash a new firmware.
So, unless the tablet gets rooted I don't see any way to make a proper backup.
I am unable to post links in messages, so you need to do some manual editing.
dz0ny said:
TLDR; we are looking for TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip
Click to expand...
Click to collapse
This however seems like very valuable information, unfortunately the only places I can find that has this available for download is charging money for access to the file.
50$ at dlgsm,com www DOT dlgsm DOT com/register.php?file=TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip&dir=%2FFLASH-FILES%2FLENOVO%2FT_Series%2FTB2-X30F
or from 10$ at pars-hamrah,com: www DOT pars-hamrah DOT com/%D8%A7%D8%AE%D8%A8%D8%A7%D8%B1-%D9%85%D8%B1%DA%A9%D8%B2-%D8%AF%D8%A7%D9%86%D9%84%D9%88%D8%AF-%D8%A7%D8%AE%D8%AA%D8%B5%D8%A7%D8%B5%DB%8C-%D9%BE%D8%A7%D8%B1%D8%B3-%D9%87%D9%85%D8%B1%D8%A7%D9%87/38027-%D8%B1%D8%A7%D9%85-%D8%A7%D9%88%D8%B1%D8%AC%DB%8C%D9%86%D8%A7%D9%84-%D9%84%D9%86%D9%88%D9%88-lenovo-tb2-x30f-%D9%86%D8%B3%D8%AE%D9%87-s000015-%D8%A7%D9%86%D8%AF%D8%B1%D9%88%DB%8C%D8%AF-5-1-1-%D8%AF%D8%B1-%D9%85%D8%B1%DA%A9%D8%B2-%D8%AF%D8%A7%D9%86%D9%84%D9%88%D8%AF-%D9%82%D8%B1%D8%A7%D8%B1-%DA%AF%D8%B1%D9%81%D8%AA.html"]Here[/URL]
It might also be available www DOT fars-gsm DOT com/75531-tb2-x30f_usr_s000015_1601151950_q8009_row_qpst-zip.html, at least they list the changelog for the firmware.
Since I have no use for a firmware right now, I will not be buying access to one (unless I at some point manage to brick mine as well). But if anyone decides to do so, please share it so others can enjoy it as well. I also suspect that if the file was available, it would increase the probability of someone attempting to make a custom rom at some point as well, it is a very cheap tablet when on sale, so it should have good potential for a community.
PS: I also stumbled over something called vRoot, that might be an alternative to Kingroot, although I have no idea whether it is as good at rooting and not installing unwanted extra apps. I guess someone who has used it on a tablet/phone that has a backup available might be able to shed some light on that.
---------- Post added at 08:08 PM ---------- Previous post was at 08:02 PM ----------
omrtpsycho said:
If I press the volume up+ volume down + power button, it just brightens the screen and shows nothing.
Click to expand...
Click to collapse
This is the QFIL (Qualcomm Flash something system) mode, however I do now know whether that helps anything at all. Since it seems to me it probably wont accept the TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip file mentioned in the thread. It seems to expect some xml file, maybe the zip file contains that?

---

Hi guys i have been strugling with this unit The last 3 days. I have eksakt same problem. I found these files: lenovo-forums.ru/files/category/106-прошивки-lenovo-tab-2-a10-30/
I extracted Them but dont know how to flash Them ?? Hope u guys Can help (sorry for bad english)
To Download files from Lenovo-forums.ru i logged in with my Google account

---

[PUT ROM TEMPORARILY HERE: https://www.wetransfer.com/download...024ee2974a44f8aa50e3dcd120160615184237/a84735 ]
Wow, suddenly action! With the help of Dead2 and Andersbp I have made some progress. Here are my steps:
I purchased the ROM from the Iranian site, and downloaded the other from the Russian forum. So now I have 2 ROMs:
65M TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip (Russian)
1.1G TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip (Iranian)
The smaller one is simply an update, which you could install easily:
1) boot into Recovery Mode
2) select "Apply Update from ADB"
3) run: adb sideload TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip
Which works... UNLESS YOU ROOTED THE DEVICE. Then it fails, and does not want to update. Thanks Lenovo
So, the larger one is a different type of ROM. This one will not load with adb sideload (gives footprint and signature error). But it DOES contain all the files to flash with QFIL (Qualcomm Flash something system).
Here I'm stuck. I followed this guide:
http://guidebelajar.blogspot.nl/2016/03/guide-how-to-flash-firmware-lenovo-vibe-p1.html
and tried to install these packages:
1) You must download and install USB Driver for Lenovo on your windows computer or PC.
2) QPST-2.7.422-qfil-qcom-Upgrade-Tool-20140422
3) Download Qualcomm HSUSB USB COM Drivers
(Note that you need to register and log in to needrom.com FIRST. Then click the link, but it will give an access error. Remove all in the URL after needrom.com (so go back to the main site), then go back to the download link, and it will work - the file is there.)
1) and 2) install pretty fine, but 3) is just a zip with a lot of drivers, no installer. I have no clue on how to install the proper driver...
Furthermore, the site suggests to install something on the device itself:
5) Create a folder with the name sdfuse in the root of the SD-card phone
6) Put the qsb-firmware (file with the extension .qsb) in the folder sdfuse.
Here I have 2 problems: First, my device does not boot, so I cannot create/copy files. Seconly: I cannot find qsb-firmware.qsb anywhere...
@ Dead2: How did you go through these steps?

---

Zwartoog said:
I purchased the ROM from the Iranian site, and downloaded the other from the Russian forum. So now I have 2 ROMs:
65M TB2-X30F_S000015_160115_ROW_TO_TB2-X30F_S000016_160602_ROW_WCA72E4AB5.zip (Russian)
1.1G TB2-X30F_USR_S000015_1601151950_Q8009_ROW_qpst.zip (Iranian)
Click to expand...
Click to collapse
Great, thanks for sharing the firmware, I hope you and everyone else with a softbricked tablet can get it fixed now
I am sure some of those would be willing to donate a couple of bucks to you if they get theirs working again.
Zwartoog said:
3) Download Qualcomm HSUSB USB COM Drivers
(Note that you need to register and log in to needrom.com FIRST. Then click the link, but it will give an access error. Remove all in the URL after needrom.com (so go back to the main site), then go back to the download link, and it will work - the file is there.)
1) and 2) install pretty fine, but 3) is just a zip with a lot of drivers, no installer. I have no clue on how to install the proper driver...
Click to expand...
Click to collapse
Ok, I used a LenovoUsbDriver_v1.0.12.exe driver installer, and that includes the HSUSB drivers needed, and I can confirm that windows recognizes the tablet as being in HSUSB mode with those. Whether QFIL does I have not tested.
I got the driver package from here: www DOT teamandroiders DOT com/lenovo-usb-drivers-download/
Zwartoog said:
@ Dead2: How did you go through these steps?
Click to expand...
Click to collapse
After you get past installing the HSUSB driver, you are officially the one that has gotten furthest on this.
I will assist in any way I can, but I will not attempt flashing my own tablet until I actually need to

---

Dead2 said:
After you get past installing the HSUSB driver, you are officially the one that has gotten furthest on this.
Click to expand...
Click to collapse
We'll get this working
Dead2 said:
Ok, I used a LenovoUsbDriver_v1.0.12.exe driver installer, and that includes the HSUSB drivers needed, and I can confirm that windows recognizes the tablet as being in HSUSB mode with those. Whether QFIL does I have not tested.
Click to expand...
Click to collapse
I tried that one too, but to no avail When I try to execute the executable, it ask for administrator permission, and after that vanishes...
I am running Windows 8, 64 bit. You?
Other question: when is your tablet recognised by Windows? Also in Recovery Mode?
Thanks!

---

Great work so far guys ! I Will try tomorrow with The new information! Mine is rootet so dont look good for me :/
Zwartoog:
The russian site also have Big files (1gb)
You Saw Them ?

---

Andersbp said:
Great work so far guys ! I Will try tomorrow with The new information! Mine is rootet so dont look good for me :/
Zwartoog:
The russian site also have Big files (1gb)
You Saw Them ?
Click to expand...
Click to collapse
No, I have spent too many hours translating Farsi today, was quite happy to find this one easily accessible on the Russian site
Can you check one of the bigger files? Might come in handy if my version seems incompatible for some reason...

---

Zwartoog said:
No, I have spent too many hours translating Farsi today, was quite happy to find this one easily accessible on the Russian site
Can you check one of the bigger files? Might come in handy if my version seems incompatible for some reason...
Click to expand...
Click to collapse
Sure Will try tomorrow

---

Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
First i followed this guide:
https://2.bp.blogspot.com/-YxnBnMMx7Xg/VnaiVim76VI/AAAAAAAAURo/pz5IiaVdlcQ/s320/qfil.jpg
But insted of this:
9. Now, enter your Lenovo Vibe P1 into recovery mode. you can do it by :
Press the Volume Up button and keep holding it while connecting it to the computer/laptop using USB cable.
Lenovo Vibe P1 will vibrate one time, and you will see black screen.
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now you can continue with the guide, and use QFIL.
I used this firmware: https://drive.google.com/open?id=0B9affStJ4JQ1U3JXUTZFTDJ6NU0
Extract the rar file. Inside you will find the files needed in QFIL.
Hope this helps you guys

---

Andersbp said:
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
First i followed this guide:
https://2.bp.blogspot.com/-YxnBnMMx7Xg/VnaiVim76VI/AAAAAAAAURo/pz5IiaVdlcQ/s320/qfil.jpg
But insted of this:
9. Now, enter your Lenovo Vibe P1 into recovery mode. you can do it by :
Press the Volume Up button and keep holding it while connecting it to the computer/laptop using USB cable.
Lenovo Vibe P1 will vibrate one time, and you will see black screen.
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
Now you can continue with the guide, and use QFIL.
I used this firmware: https://drive.google.com/open?id=0B9affStJ4JQ1U3JXUTZFTDJ6NU0
Extract the rar file. Inside you will find the files needed in QFIL.
Hope this helps you guys
Click to expand...
Click to collapse
Super! Will try this tonight. Just in case: which Windows version are you using?

---

Zwartoog said:
Super! Will try this tonight. Just in case: which Windows version are you using?
Click to expand...
Click to collapse
I use windows 10

---

Andersbp said:
Huge breakthrough
I now have a unrootet, unbricked and stable unit again!
Click to expand...
Click to collapse
Great work! I am glad I was able to help you guys get this fixed
Andersbp said:
You need to hold in VOLUME UP AND VOLUME DOWN AND POWER button at same time. Until you see
Click to expand...
Click to collapse
Yep, its at the bottom of my first post also, found that out by accident while trying to get into the normal recovery.
Now, hopefully someone will want to port TWRP and CM13 or Paranoid to this tablet

---

Doh i did not see that Dead2
Thanks everybody together we defeated the problem !

---

SUPER! Succes here as well! The trick was indeed to hold both vol UP and DOWN
Now: brand-new unrooted device
Thanks
Btw: I noticed that the rom from Andersbp is a TB2-X30L rather than the TB2-X30F. I used my F file (paid for it, dammit ), and that one also works well.
I am currently checking if I can modify the stock ROM to enable root / mult-user. Any hints?

---

Nice zwartoog !
I Can root with kingroot.. Are there better alternatives ? Kingroot is Full of bloatware

---

Andersbp said:
Nice zwartoog !
I Can root with kingroot.. Are there better alternatives ? Kingroot is Full of bloatware
Click to expand...
Click to collapse
Noo, no Kingroot. That's where all the disasters began. It is full of bloatware. Trying to uninstall Kingroot lead to bricking the device
Personally I am only interested in re-enabling the multi-user feature from lollipop. WHICH IS FOR SOME REASON DISABLED BY LENOVO Even when rooted and modifying the system/build.prop did not re-enable it.
I'm giving up now. At least I have a workable device. Restored pride. And more important: 3 happy kids

---

I think the TB2-X30L is the LTE version of the tablet, while the TB2-X30F is the wifi-only version. If correct, then there should be no problem
when using the LTE on a non-LTE model, but the other way around could potentially cause LTE to not work. The LTE firmware might have some
extra apps and settings enabled to cater to this ability, but it might also be completely identical. Btw, what does the model information say
after being flashed with the L firmware? In any case it is useful to know that they are cross-compatible, since sometimes there can be differences
in chipsets or screens that can cause minor or major problems.
As I mentioned earlier, another root alternative to kingroot seems to be vRoot, but I have not tried it myself. But now that it is possible to
recover a bricked tablet, it is also less risky to test such things.
BTW: Please remember to use the "Thanks!" button on posts you find helpful, I have tried to do so myself on the posts that I find helpful