hi everyone, i am new on this site.
i recently got a new shv-e210s on hand. i used it around 2 weeks and i found some big problems with it. I CAN'T TALK ON THE PHONE MORE THAN 2-3 MINUTES it drops all the calls . it's there any fix, or can i convert it to GT-I9305?? HEL PLEASE i can pay to have it fix beacause io love this phone. thanks
No, you can't convert it. Sounds like a hardware fault, do a factory reset then flash the right firmware to test. Don't use any files for the i9300.
Sent from my GT-I9300 using Tapatalk
Solution for Drop calls in Shv e210s
one.kid94 said:
hi everyone, i am new on this site.
i recently got a new shv-e210s on hand. i used it around 2 weeks and i found some big problems with it. I CAN'T TALK ON THE PHONE MORE THAN 2-3 MINUTES it drops all the calls . it's there any fix, or can i convert it to GT-I9305?? HEL PLEASE i can pay to have it fix beacause io love this phone. thanks
Click to expand...
Click to collapse
If you're using 4.3 jellybean there is an app in playstore as SKT Hidden menu on which u can go to network settings - Network mode - and select Wcdma all or GSM all which ever network u prefer
If you're using 4.4.4 kitkat u have to dial *#9090# and from network mode enable WCDMA or GSM
fymhassan said:
If you're using 4.3 jellybean there is an app in playstore as SKT Hidden menu on which u can go to network settings - Network mode - and select Wcdma all or GSM all which ever network u prefer
If you're using 4.4.4 kitkat u have to dial *#9090# and from network mode enable WCDMA or GSM
Click to expand...
Click to collapse
Data Network is fluctuating in this mode. But yes the Call doesnt drop any more
Related
I'm from Pune,India & i have Samsung Galaxy ace GT-S5830 and i use Airtel sim card..Recently i activated airtel 3g in my cell by recharging with 101 RS/- but problem is Even after waiting for 4 hrs i still get Edge signal..
Now i tried the same 3g activated airtel sim in my Samsung Galaxy 3 bt here i immediately got 3g signal in same area!!I called customer care bt still i didnt got any help went to Airtel Relationship Center but still same repsonse..
Finally someone told me that there might be problem in my cell,but for that i chked Idea 3g in my cell in same area .. and i was shoked to see it worked i got 3g signal in same cell Even vadofone 3g worked.So one thing for sure problem is with Sim not with cell..
So i Wanted to know the Solution for this..or will i have to take a new Airtel sim again,which i really dont want to do bcozz i really like my current cell number
vj1 said:
I'm from Pune,India & i have Samsung Galaxy ace GT-S5830 and i use Airtel sim card..Recently i activated airtel 3g in my cell by recharging with 101 RS/- but problem is Even after waiting for 4 hrs i still get Edge signal..
Now i tried the same 3g activated airtel sim in my Samsung Galaxy 3 bt here i immediately got 3g signal in same area!!I called customer care bt still i didnt got any help went to Airtel Relationship Center but still same repsonse..
Finally someone told me that there might be problem in my cell,but for that i chked Idea 3g in my cell in same area .. and i was shoked to see it worked i got 3g signal in same cell Even vadofone 3g worked.So one thing for sure problem is with Sim not with cell..
So i Wanted to know the Solution for this..or will i have to take a new Airtel sim again,which i really dont want to do bcozz i really like my current cell number
Click to expand...
Click to collapse
Check your Apn settings. That has been spread all over this forum with the same problem
Sent from my GT-S5830 using XDA App
Jekle_Ace said:
Check your Apn settings. That has been spread all over this forum with the same problem
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
well i have this apn settings :
name: Airtel
Apn : airtelgrps.com
rest all fields blank!!! and this settings almost everyone does for 3g even Customer care told me the same but still no Success...
vj1 said:
well i have this apn settings :
name: Airtel
Apn : airtelgrps.com
rest all fields blank!!! and this settings almost everyone does for 3g even Customer care told me the same but still no Success...
Click to expand...
Click to collapse
APN is right..
what abt the following setting?
Settings - Wireless and network - Mobile network - Network mode?
forall.sri said:
APN is right..
what abt the following setting?
Settings - Wireless and network - Mobile network - Network mode?
Click to expand...
Click to collapse
In Samsung galaxy ace there is no Network mode option once u go in Mobile network there is an option named "Use only 2g network " which for using 3g we just have to Untick it!!
In the latest update in India which is DDKQ5, there is network mode.. pls check my screenshot
hi am using spice mi-350n dual sim 3G android phone
i recently activated 3g on my sim and activate 3g plan also
i put network mode only wcdma but i cant get conection (my network also show
3G network )
and when i select gsm mode i get connection with E.
please help me what can i do...?
type *#*#4636#*#* in your dialler.a new menu will open.select phone information and scroll down.select set preffered network type and select WCDMA only.U r done..!!
Hi All,
I know its a topic which has been addressed differently in different threads. I am a user from India and have a GSM SIM. I have got a Verizon S4 phone. I tried using it with Vodafone SIM and get a problem in using it. Surprisingly a NOTE 2 from Verizon works just fine. I am able to use it for data with 3G but not able to use it for voice. Following steps have been tried already.
- Default Options of using Global Mode and GSM/UMTS ** Doesnt search the network at all.
- Hidden Menu Changes using # codes. ** Shows network but emergency mode only.
- Phone Info app to change the mode. ** Shows network but emergency mode only.
- RF Band change using the hidden menu. ** Shows network but emergency mode only.
It does say that it has GSM radio but cant be used for some software reason I suppose. I checked with Verizon Rep and was told that it cannot be used in India with a GSM SIM and would need the Verizon SIM only to connect with International Roaming.
Can I install a I-9505 ROM on this and then would it pick up the GSM signal for voice and data. Please help.
I don't think your Verizon rep is correct. I bought a Verizon S4 just before going to Europe for 1 month. I used first a gsm SIM card from Germany, and then a gsm card from France. I had to add APN's to get data (I used "offline sim APN database" from the market to help get the necessary APN info), but had no trouble with voice or data for my entire trip. The gps and navigation services on the phone were extremely valuable on a couple of occasions, as was the wifi hotspot. In France, you can purchase 2 GB of data service for 20 Euros. I checked with Verizon global services ( 908-559-4899 outside the US or 800-711-8300 from inside ) before I left, and the Verizon S4 was sim unlocked out of the box. They did not make a big deal of my plan to use other SIM cards either.
Sent from my SCH-I815 using xda app-developers app
Installed WamanLite I9505 ROM
Hello All,
I found that Wanam Lite I-9505 ROM can be installed on Verizon S4. I installed it and patched it with Loki-Doki patch to boot up as I got the Verizon Software error. Yet my phone doesnt pick up the GSM signal for voice and SMS. It picks up the signal and I am able to browse internet on it but no calls or SMS. Please help...!!
Is there any way that I can install or flash a regular GSM radio over the phone ? Or tweak it in someway to use the GSM signal as primary for voice and sms.
phrozenwire said:
Hello All,
I found that Wanam Lite I-9505 ROM can be installed on Verizon S4. I installed it and patched it with Loki-Doki patch to boot up as I got the Verizon Software error. Yet my phone doesnt pick up the GSM signal for voice and SMS. It picks up the signal and I am able to browse internet on it but no calls or SMS. Please help...!!
Is there any way that I can install or flash a regular GSM radio over the phone ? Or tweak it in someway to use the GSM signal as primary for voice and sms.
Click to expand...
Click to collapse
I have also Verizon's S4 (i545) and use it in GSM network with only one small problem - it will not send SMS with in-ROM SMS apk to international-formatted numbers (+380-XX-XXX and so on), but send without problem to local-formatted numbers (XX-XXX...) All the rest is working good.
Could you tell me please - how did you get to install i9505's ROM on your device? I have also Verizon's error after installation, and don't know how to run it...
Hi I too have the vzw s4 in india.. and niether voice nor sms is functioning on it.
By rooting it and installing apn manager I was somehow able to get the data 3g working for vodafone ind.
I too am struggling to find a solution to this.
Ive haventvyet flashed it. I came across a guy who said he will be able to get it working but somehow I havent yet been abke to follow up with him.
Guess we both are on the same boat.
Lets keep in touch and update if any of us finds a solution to this.
Sent from my SCH-I545 using xda app-developers app
You all can try to flash my port of ARHD 2.0 ROM, that can be found it this thread:
http://forum.xda-developers.com/showthread.php?t=2346365
It is fully GSM and as international as regular GSM-version of S4. CDMA can be turned on only on hidden test application. Everything else is working and was tested in different networks.
I too created a post seeking help in this regard but didn came across anything concrete yet.
Everyone out here believes it to be a world phone and some have even been using the gsm network in europe but its not working in india.
Ive failed to understand that how come its detecting signals with functioning data is not working on either voice or sms.
Tmobile and atnt gs4 guess have this service menu from where they can be network unlocked explicitly..but unfortunately I havent yet come any such thing for vzw gs4.
Sent from my SCH-I545 using xda app-developers app
ashroh said:
I too created a post seeking help in this regard but didn came across anything concrete yet.
Everyone out here believes it to be a world phone and some have even been using the gsm network in europe but its not working in india.
Ive failed to understand that how come its detecting signals with functioning data is not working on either voice or sms.
Tmobile and atnt gs4 guess have this service menu from where they can be network unlocked explicitly..but unfortunately I havent yet come any such thing for vzw gs4.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Zer0r said:
You all can try to flash my port of ARHD 2.0 ROM, that can be found it this thread:
http://forum.xda-developers.com/showthread.php?t=2346365
It is fully GSM and as international as regular GSM-version of S4. CDMA can be turned on only on hidden test application. Everything else is working and was tested in different networks.
Click to expand...
Click to collapse
I tried installing the ARHD 2.0 ROM but still the same issue persists. The phone picks up the signal for data but when tried selecting network manually or automatic using the GSM / UMTS option, it says disable data to search networks, when data is disabled, the phone shows available networks says phone registered to network but the status still says Emergency Calls Only. Also if tried dialing a phone it says no network available. There has to be something in the modem settings which can be tweaked through the service menu which will change the use of GSM for voice and data and not use CDMA.
phrozenwire said:
I tried installing the ARHD 2.0 ROM but still the same issue persists. The phone picks up the signal for data but when tried selecting network manually or automatic using the GSM / UMTS option, it says disable data to search networks, when data is disabled, the phone shows available networks says phone registered to network but the status still says Emergency Calls Only. Also if tried dialing a phone it says no network available. There has to be something in the modem settings which can be tweaked through the service menu which will change the use of GSM for voice and data and not use CDMA.
Click to expand...
Click to collapse
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Zer0r said:
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Click to expand...
Click to collapse
I did a full wipe. I have 2 Galaxy S4's and also an Optimus G. The card that I am using is my regular SIM card so its not an issue with the card for sure. The ROM was installed on both the phones and neither of them picked up the signal for voice and SMS.
phrozenwire said:
I did a full wipe. I have 2 Galaxy S4's and also an Optimus G. The card that I am using is my regular SIM card so its not an issue with the card for sure. The ROM was installed on both the phones and neither of them picked up the signal for voice and SMS.
Click to expand...
Click to collapse
Ok. To go and chose type of radio-band you may install Battery Monitor Widget from Google Play (well, the main purpose of this app is different, but it is what comes first in my mind). Put it's widget on the desktop, open it and go for bottom right button, named Test. There you can first menu (Device Info) and there you will be able to change all variations of the radio bands and their combinations, available for i545. If non of the combinations will help - mosty probably your operator works on unsupported for this phone cellular format.
Zer0r said:
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Click to expand...
Click to collapse
Zer0r said:
Ok. To go and chose type of radio-band you may install Battery Monitor Widget from Google Play (well, the main purpose of this app is different, but it is what comes first in my mind). Put it's widget on the desktop, open it and go for bottom right button, named Test. There you can first menu (Device Info) and there you will be able to change all variations of the radio bands and their combinations, available for i545. If non of the combinations will help - mosty probably your operator works on unsupported for this phone cellular format.
Click to expand...
Click to collapse
I have the Phone Info app which allows band select. Tried on all possible modes. Same issue persists. Strangely the Note 2 purchased from Verizon works flawlessly without any mods or changes. I am thinking of giving to some professional phone guy who may have code level flashing or modding tools to try and fiddle around with settings of the modem or the radio to pick up the signal here.
phrozenwire said:
I have the Phone Info app which allows band select. Tried on all possible modes. Same issue persists. Strangely the Note 2 purchased from Verizon works flawlessly without any mods or changes. I am thinking of giving to some professional phone guy who may have code level flashing or modding tools to try and fiddle around with settings of the modem or the radio to pick up the signal here.
Click to expand...
Click to collapse
Hey phrozenwire, I am able to use both voice n sms now in my VZW GS4.
And I literally did nothing to make the voice n sms functional. I too had troubles for like 2 weeks and it didn work for me then.
I rooted the phone to add apn settings and the data got activated. But today morning when I woke up ... surprise surprise .. it began to work.. rcvd sms and calls and I was so happy. . Last I remember I switched on the power save mode and my cell fell down twice and guess it did the trick for me.
Thanks all for your help and comments.
Sent from my SCH-I545 using xda app-developers app
Hello Folks,
I was planning to by VZW S4 to use in India & by looking at all your comments it makes me not to buy. Any further updates after so much of discussion on this phone to make it work in India's cellular service. I see the last post was on July 2013 & now any further lucks/success in making this phone work over there in India??
Tx,
Naraynar
---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ----------
Hello Folks,
I was planning to by VZW S4 to use in India & by looking at all your comments it makes me not to buy. Any further updates after so much of discussion on this phone to make it work in India's cellular service. I see the last post was on July 2013 & now any further lucks/success in making this phone work over there in India??
Tx,
Naraynar
I have a trouble with Android ROM 4.4 KitKat by Jamal. No mobile service
Device: Galaxy S4
I have the same problem?
VladyCu said:
I have the same problem?
Click to expand...
Click to collapse
Hey there, I just installed the rom a few minutes ago and had the same problem
What I did was Settings -> more -> Mobile Networks -> Network Operators -> and then chose my own carrier/service provider
It worked for me, hope the same goes for you
no service
Hey I flashed the 4.4 and no service I did search for my carrier UK under settings all good to start with then soon as you unlock your phone . no service not sure what's up
Creat1vE-A said:
I have a trouble with Android ROM 4.4 KitKat by Jamal. No mobile service
Device: Galaxy S4
Click to expand...
Click to collapse
Yes I am not able to keep an internet connection after installing "Jamals" Google Edition ROM. I can pick LTE (Recommended), 3G, or 2G. I have double checked my APN Setting for T-Mobile and they are right. After picking LTE and 3G and then doing a search for "Network Operators" and telling it to "Automatically choose preferred network", I get 4 bars of signal but then lose the signal. If I tell it use 2G, I get 4 bars with an "E" next to it. That signal stays on. I noticed in "Jamals" post that the baseband should be "EMJ" instead, I show a baseband of "I337MVLUAMDJ". The "Jamal" ROM apparently does not update the baseband? How do I fix that?
I have the same problem
I have that problem month ago with my phone (lg l7) which I install ROM who request baseband v10,and I have v20,and flashing v10 my signal come back,myb there is something like baseband for galaxy,search and sorry for my bad english
Sent from my LG-P700 using Tapatalk
Hi,
Guys I am from Pakistan and using Galaxy S3 I9300 International Version. Recently, all telecom operators of Pakistan have switch their networks to 3G. Nowadays, they are testing 3G services in some areas of major cities. They have told their customers to set their mobile settings to WCDMA for 3G services.
After setting to WCDMA, I receive 3G services without any issue but as soon as I leave the coverage area 3G plus Cellular Services switched off.
I change the settings to Auto GSM/WCDMA, but after that even in 3G coverage area I get Edge Services and not 3G.
Q) Is there any way, by which I can configure the option of Auto WCDMA/GSM with WCDMA Preferred ?
Anyone who can help out . . . . . !
Sent from my GT-I9300 using Tapatalk
Setting
kashifmehmood said:
Anyone who can help out . . . . . !
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
go to settings,network settings change GSM mode to wcdma/GSM preferred mode
slogger001 said:
go to settings,network settings change GSM mode to wcdma/GSM preferred mode
Click to expand...
Click to collapse
there is no preferred settings and on auto connect it goes to GSM mode first
Sent from my GT-I9300 using Tapatalk
no coverage
kashifmehmood said:
there is no preferred settings and on auto connect it goes to GSM mode first
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
i think ur service coverage is not good thats why ur loosing 3g signal
Go to dialer and type *#*#4636#*#* and see if u can get to test mode
slogger001 said:
i think ur service coverage is not good thats why ur loosing 3g signal
Go to dialer and type *#*#4636#*#* and see if u can get to test mode
Click to expand...
Click to collapse
in stock 4.1.2 xxmg4
*#197328640#
service menu
then chose debug screen
then phone control
then network control
then aquistion order
choose umts>gsm
sorry for bad english
slogger001 said:
i think ur service coverage is not good thats why ur loosing 3g signal
Go to dialer and type *#*#4636#*#* and see if u can get to test mode
Click to expand...
Click to collapse
semi2 said:
in stock 4.1.2 xxmg4
*#197328640#
service menu
then chose debug screen
then phone control
then network control
then aquistion order
choose umts>gsm
sorry for bad english
Click to expand...
Click to collapse
Both codes not working in stock 4.3
again sorry for my bad english
quickshortcut maker free apk from playstore
find
settings
testing
device information
set preferd network type
gsm/cdma prl
Guys, i finally found solution for our Moto G network data issue,
Previously i was using Xperia C where i can select 2g(GSM), 3G( WCDMA) , 3G+2G option.
But in our Moto G - 2G, 3G+2G option is there but complete 3G (WCDMA) is missing this means
If we select 3G, our phone will Select 2G when our phone finds full 2G network, it will switch to 3G only when it finds full network
"Network" yup this is solution
Network app just download this from play store and enjoy complete full
3G support :good:
https://play.google.com/store/apps/details?id=de.mangelow.network&hl=en
I am not here to promote this app just to help my xda brothers whosesoever is facing similar problem like me
Just hit thanks if this thread helped you :good:
Or u can create custom shorcut.using any 3rd party launcher
Long press on home>shorcut>setting>phone info
No need of any app
vikasb32 said:
Or u can create custom shorcut.using any 3rd party launcher
Long press on home>shorcut>setting>phone info
No need of any app
Click to expand...
Click to collapse
Hey there is a shortcut....
Just dial
HTML:
*#*#4636#*#*
then phone info
reeeju said:
Hey there is a shortcut....
Just dial
HTML:
*#*#4636#*#*
then phone info
Click to expand...
Click to collapse
help me i select WCDMA only but there is no change it shows gsm,
should i do anything aftar scrolling on WCDMA ?
shahbaj badhon said:
help me i select WCDMA only but there is no change it shows gsm,
should i do anything aftar scrolling on WCDMA ?
Click to expand...
Click to collapse
Try selecting wcdma only or wcdma preferred....i always use auto mode......if it not works...then put the phn in airplane mode once and switch off then restart and try again..some times this solves network problem for me.....aftr selecting if it doesnt work u can go to settings/more/cellular networks/network mode/ wcdma only....
MAKE SURE U HAV A ACTIVE 3G RECHARGE FOR UR NUMBER WITH ENUFF BALANCE....LOL..JOKING
Sent from my osprey_uds using XDA Labs
This method does not work on second sim.Is there any way to activate 3g only mode in second sim?
Sent from my Moto G 2014 using XDA-Developers mobile app