Related
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Painkille5 said:
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Click to expand...
Click to collapse
You have a faulty xrecovery installed mate!
Use SEUS to repair. Flashtool to root.
Once done, let me know. I have a safe, simple way of installing xrecovery (that works).
Also check http://forum.xda-developers.com/showthread.php?t=1054818
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Hl
Painkille5 said:
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Click to expand...
Click to collapse
Seus will reinstall 2.3.3.
Flashtool doesn't create backup.
Yes, if u made a backup through xrecovery, you can restore it.
But b4 installation of xrecovery let me know
Hit thanks if helpful.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Painkille5 said:
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Click to expand...
Click to collapse
You can use pc companion too.
Check these :
gadgets.apnafundaz.com/2010/07/downgrade-xperia-x10-to-original-generic-firmware-using-seus-new-debranding-method/
ucanphone.com/sony-ericsson/sony-ericsson-xperia-x10-update-service-165.html
www.livesony.com/forum/search.php?searchid=139999
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Painkille5 said:
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Click to expand...
Click to collapse
You should contact doomlord
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
who is doomlord?
Painkille5 said:
who is doomlord?
Click to expand...
Click to collapse
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
aR_ChRiS said:
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Painkille5 said:
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Click to expand...
Click to collapse
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
aR_ChRiS said:
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thats what i said i already know..
can you answer me to the rest of my questions please?
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate if you think you backed up properly from xrecovery and it still in sd card, use card reader to retrieve it to pc. The file should be under sdcard/xrecovery/backup/xxxxx.zip. then try recover it from working phone with xrecovery. Hope this help n good luck.
Sent from my SO-01C using xda premium
milton.bain said:
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
thank you very much!!!
when i will find a way to churge my battery ill tell you what ended up with this!
Thanks!!
Finally, Sony Mobile willing to let go the Sola ICS for Central Europe 1261-7807 , which 6.1.1.B.1.54. IMO this should be tiny bugs fix from the previous 6.1.1.B.1.10. :angel:
** This is world generic version, which mean it included most languages
Like previous GB Central Europe, this 1261-7807 built with minimal 3rd party apps (standard like live wallpaper Earth & Echanted forest/OfficeSuite/PlayNow/Top contacts/TrackID/Wisepilot for XPERIA/Xperia SmartTags/McAfee Security -- all removeable), and the Send Usage Info option inside settings/xperia, this option not available on many region.
** Try turn off the both animation, UI will faster - not necessary if you perform a factory reset which all data settings will be gone
- Its recommended perform a factory reset, to make sure the newer version OS not slow down by any app & app data from previous OS. After factory reset, 6.1.1.B.1.54 is certainly much smoother & better than previous 6.1.1.B.1.10. :good:
- you can disable recommender/all facebook/anonymous usage stats/ + whatever you not using inside Settings/Apps/ALL, this suppose to save up certain resources
- battery life part, no comment yet as it take few charged for monitoring.
( update I, .54 ICS battery life reading seem more accurate instead of "any better way to serve in .184 GB. Also, if you just using messaging apps, its recommended switch to GSM ONLY, this will help on less consume battery life. )
( update II, Extended Standby Mode. This ESM just eat up more battery juices instead of saving as every couple mins it need to execute command disable the data network after your Sola screen off & idle sometimes (say 5 mins?!), the theory just like those auto task killer apps, the more it ran, the faster your Sola battery drain up, yet the scenario is its looping. )
- a bit weird, after .54 ICS updated battery charging time seem goes longer than .184 GB. Probably the battery reading 'more accurate' ?!
Sola MT27i 6.1.1.B.1.54 SI 1261-7807 firmware on ftf format - Central Europe
MD5: 5824B09539A84D6E6E9BE989CB351980
SHA-1: 3A1B974331F66E7C880B253DB24479D4A16CDB92
https://hotfile.com/dl/182391452/e0ce99a/Sony.Sola.MT27i_6.1.1.B.1.54_Central.europe.ftf.html
http://www.4shared.com/file/_ncRt2_2/SonySolaMT27i_611B154_Centrale.html?
-----------------I-F----y-o-u----n-e-e-d----d-o-w-n-g-r-a-d-e----t-o----p-r-e-v-i-o-u-s----S-o-L-a----G-i-n-g-e-r-B-r-e-a-d-----------------
Sola MT27i 6.0.B.3.184 SI 1261-7807 firmware on ftf format - Central Europe, Generic world version, mean included most languages
Bundled with McAfee which I don't need
Still new, need you guys find out what's enhanced
Ok, I create alternative links, see which suit for your line speed
MD5 - F4005F8ED47EC98A581095E709AEB165
SHA-1 - 68CB18618EC6AC5A0787A470241C80173CE8B26B
http://www.4shared.com/rar/YWdB_tEN/MT27i_60B3184_Central_Europe.html
https://hotfile.com/dl/165280984/7108d17/MT27i_6.0.B.3.184_Central_Europe.rar.html
Plezz Upload
Media fire Or Rapid Share Links
Oh man you just got me, you were faster than me..
Nice work :good:
Thank u Very Much Really Appreciate It !!
I have downloaded this file from 4shared，but when I extracted it，it went wrong，so can you give me the MD5 of this file.Thanks!
So does this rom fix the network problems???
Sent from my MT27i using Tapatalk 2
Wow that was fast bro thanks!! :thumbup:
Is there a chance that you can upload Indian version too???
Just guessing!!!
Sent from my MT27i using xda app-developers app
soulhackereborn said:
Wow that was fast bro thanks!! :thumbup:
Is there a chance that you can upload Indian version too???
Just guessing!!!
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
since its world generic version, should have the language you wanted
rohit3221 said:
So does this rom fix the network problems???
Sent from my MT27i using Tapatalk 2
Click to expand...
Click to collapse
I'm not sure, but after a month Sony .184 should fix many problems, as they push this version in hurry way. No harm to try it out
luchen said:
I have downloaded this file from 4shared，but when I extracted it，it went wrong，so can you give me the MD5 of this file.Thanks!
Click to expand...
Click to collapse
MD5 - F4005F8ED47EC98A581095E709AEB165
irontech said:
since its world generic version, should have the language you wanted
I'm not sure, but after a month Sony .184 should fix many problems, as they push this version in hurry way. No harm to try it out
MD5 - F4005F8ED47EC98A581095E709AEB165
Click to expand...
Click to collapse
Thank you very much!
Please help. My xperia sola cannot be put to flashmode. when i tried to update the new firmware it requires flashmode. when i tried to connect the USB while holding the volume down key the green light appears for 5 seconds and after that it went to normal mode. please help. tnx...
tsoytsoy1880 said:
Please help. My xperia sola cannot be put to flashmode. when i tried to update the new firmware it requires flashmode. when i tried to connect the USB while holding the volume down key the green light appears for 5 seconds and after that it went to normal mode. please help. tnx...
Click to expand...
Click to collapse
Does the pcc run properly from your windows? e.g:- run pcc, connect phone with normal mode, pcc detect your phone?
also, use the latest flashtool 9.0
any feedback?
Hello everyone,
I have rooted my MT27i using Doomlords kernel. Bootloader is unlocked too. Will I lose root access once I flash this new .184 ROM using Flashtool?
Thanks!
@irontech; I had the same problem. Make sure phone is off, insert USB cable holding down vol up/vol down (forgot which one). Phone will boot into flash mode. Now you have exactly 5 secs to install drivers from android SDK. This is quite hard, but it can be done. I did it in two steps. Leave device manager open, boot phone into flash mode. Once you see the device, quickly double click it and choose driver location. DO NOT hit install yet. Instead disconnect phone, turn it off and restart it in flash mode again, after that you can hit install. Phone should now be recognized and stay on. Good luck!
Locutus266 said:
Hello everyone,
I have rooted my MT27i using Doomlords kernel. Bootloader is unlocked too. Will I lose root access once I flash this new .184 ROM using Flashtool?
Thanks!
@irontech; I had the same problem. Make sure phone is off, insert USB cable holding down vol up/vol down (forgot which one). Phone will boot into flash mode. Now you have exactly 5 secs to install drivers from android SDK. This is quite hard, but it can be done. I did it in two steps. Leave device manager open, boot phone into flash mode. Once you see the device, quickly double click it and choose driver location. DO NOT hit install yet. Instead disconnect phone, turn it off and restart it in flash mode again, after that you can hit install. Phone should now be recognized and stay on. Good luck!
Click to expand...
Click to collapse
you'll lose the root access as this .184 is sony official central europe ver.
tsoytsoy1880 said:
Please help. My xperia sola cannot be put to flashmode. when i tried to update the new firmware it requires flashmode. when i tried to connect the USB while holding the volume down key the green light appears for 5 seconds and after that it went to normal mode. please help. tnx...
Click to expand...
Click to collapse
Same goes to me I keep trying 100x change from pc to pc then ok but after flashing then its happening again
Sent from my MT27i using xda app-developers app
After 1day using this firmware. I found few problems my screen not responsive when typing - need tap twice. Lost signal. My phone lock but unlock screen missing after few second appear
Sent from my MT27i using xda app-developers app
@boyz87 My Touchscreen works better than on the .162 before. And i'm happy that i have no signal losts anymore And the Problem with the Lockscreen i only had on older firmwares
Are you sure that you have the new .184?
Gesendet von meinem MT27i mit Tapatalk 2
lol98lol98 said:
@boyz87 My Touchscreen works better than on the .162 before. And i'm happy that i have no signal losts anymore And the Problem with the Lockscreen i only had on older firmwares
Are you sure that you have the new .184?
Gesendet von meinem MT27i mit Tapatalk 2
Click to expand...
Click to collapse
How?
Sent from my MT27i using xda app-developers app
irontech said:
Does the pcc run properly from your windows? e.g:- run pcc, connect phone with normal mode, pcc detect your phone?
also, use the latest flashtool 9.0
Click to expand...
Click to collapse
my pc run pcc and it is alwys connected to pcc as i try to put on flashmode. and i am using flashtool 0.9.0.0. but it is alwys the same. there is green light but within 5 secs the green light is off and change to red light and sony logo pop up.
by the way sir. is there any way to flash my sola with the ftf file not using the flash tool? can i use fastboot mode to flash the ftf file to my phone without bricking it?
world generic version??
Sorry for asking, what does it means, world generic version firmware? is it suitable for all region even it is from central europe? Is there any official relesed to asia, I'm from Malaysia
I was trying to root my phone. After a lot of trying to flash, my phone shut down and I can't turn it on again. When I try charging, Red light keeps blinking also when I connect it to PC. I charged for almost 4 hours now and still red light blinking but doesn't turn on. Please help, my phone is 2 weeks old.
It's probably bricked.
Try Sony update service for re installing the system
Sent from my MT15i using xda app-developers app
jptman said:
It's probably bricked.
Try Sony update service for re installing the system
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
Can i update it without turning the phone on?
Ckai14 said:
Can i update it without turning the phone on?
Click to expand...
Click to collapse
Yes, that last post is a bit misleading.
Download flashtool from the sticky threads in the dev section and download a stock .ftf file from there as well.
Enter flashmode on phone and flash the stock .ftf file.
There is a possibility the phone is bricked but there are lots of other options to try first.
EDIT, also, try this. Take the battery out and leave for 1-2 minutes, replace battery and try to charge again
Sony update service doesn't require that your phone needs to be turned on.
I finally fixed my phone. I updated it using Sony Update Center, after a few hours. It turned on. Thanks guys!
Ckai14 said:
I finally fixed my phone. I updated it using Sony Update Center, after a few hours. It turned on. Thanks guys!
Click to expand...
Click to collapse
Can you please help me
anooparavindan said:
Can you please help me
Click to expand...
Click to collapse
Try flashing stock fw using flashtool !
And see whether it worked!
Sent from my MT11i using xda premium
Ghostfreak NB said:
Try flashing stock fw using flashtool !
And see whether it worked!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
I even cannot switch on my phone..chk my detail qstn in Q&A forum.please help
anooparavindan said:
I even cannot switch on my phone..chk my detail qstn in Q&A forum.please help
Click to expand...
Click to collapse
It doesn't require your phone to be working!
Well,what's the purpose of flashtool if it requires your phone to be working!
Just read a thread on how to flash by Lone wanderer or Madfysh
Sent from my MT11i using xda premium
Download flashtool and download this ftf file https://docs.google.com/file/d/0ByNPPw6PDxkkdzgyakVCSURMTUU/edit?pli=1
Install flashtool and copy that downloaded ftf file to C:/Flashtool/firmwares
Open flashtool click on lighthining icon and choose flashmode and click ok
Now you will see sth like just click ok !
Now remove and reinsert your battery ! But don't turn on ! Just hold back key and connect to computer and flashtool will recover your neo l to healthy again
Can you please help me
Click to expand...
Click to collapse
Use sony update service its the best way to restore your phone. i will automatically guide you through the steps.:good:
Ckai14 said:
I was trying to root my phone. After a lot of trying to flash, my phone shut down and I can't turn it on again. When I try charging, Red light keeps blinking also when I connect it to PC. I charged for almost 4 hours now and still red light blinking but doesn't turn on. Please help, my phone is 2 weeks old.
Click to expand...
Click to collapse
its very simple..just install flashtool. and download stock ftf for your phone. copy it into firmware folder of flashtool. and flash it. no need to start phone. means u can flash it even its not working.
---refer this link to download stock firmwares----
http://forum.xda-developers.com/showthread.php?t=1952333
Hi all,
Sorry to bring back an old post but I'm having the same issue as the first post. I was able to put my phone on flash mode with the stocked ftf provided here. Once complete, I unplug my phone from the computer and tried to turn it on, it vibrates but nothing shows up. I tried flashing it numerous times with the same results.
The only difference now than before I first flashed it is that now when I click on the power button, it doesn't flash red.
Please advise.
Thanks in advance.
Facing a similar problem
Hey guys , I am facing a similar problem ....My phone suddenly stopped working one day....It does not charge even the led does not glow(as it showed up red colour on charging) ....even it does not get detected on my PC.
I have tried everything it still does not turn on... I tried removing battery and sim card a number of times , I tried using pc companion and sony update service but it still does not turn on ( it does not get detected on any of them) but a green light shows up on my device when it gets connected to update service..but no effect on the pc. Please help me....!!
try flashtool...scroll up and read Saingpor's post..
Im having the same problem. The thing is my computer cant recognize my phone. I have tried using flashtool and Sony Pcc. Still it cant detect my MT25i. Please help me. Thanks.
My mobile Sony Xperia Neo L is not getting switched on. It got turned off on its own. My mobile was under the below explained situation before it stopped working.
1. I was getting alerts saying - LOW PHONE MEMORY IS AVAILABLE delete some data. It had 43 MB left in phone memory.
2. Memory card was also full the day before.
3. I was not able to install any applications.
4. Since I have activated the auto update for few applications like Whatsapp, google maps etc. For them also i used to get alerts saying - INSUFFICIENT STORAGE IS AVAIALABLE TO UPDATE the software.
5. I always keep Wi-Fi on in my mobile. (If any open Wi-Fi is available mobile will get updates)
6. Battery was more than 30% charged.
All of the above may be the reasons for software problem.
No time in the past phusical harm happened to the phone, Since i bought in 2012 August.
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
NSatya said:
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
Click to expand...
Click to collapse
Even sony can't help you how can we help you ?
Through sony support center i had upated the OS. In fact my phone was having latest version of OS than what I had installed through Sony.
NSatya said:
My mobile Sony Xperia Neo L is not getting switched on. It got turned off on its own. My mobile was under the below explained situation before it stopped working.
1. I was getting alerts saying - LOW PHONE MEMORY IS AVAILABLE delete some data. It had 43 MB left in phone memory.
2. Memory card was also full the day before.
3. I was not able to install any applications.
4. Since I have activated the auto update for few applications like Whatsapp, google maps etc. For them also i used to get alerts saying - INSUFFICIENT STORAGE IS AVAIALABLE TO UPDATE the software.
5. I always keep Wi-Fi on in my mobile. (If any open Wi-Fi is available mobile will get updates)
6. Battery was more than 30% charged.
All of the above may be the reasons for software problem.
No time in the past phusical harm happened to the phone, Since i bought in 2012 August.
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
Click to expand...
Click to collapse
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
cherry676 said:
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
Click to expand...
Click to collapse
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
AW: [Q] Sony Xperia Neo L not getting switched on
NSatya said:
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
Click to expand...
Click to collapse
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
motorazrv3 said:
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, could you please provide the steps to do what you said..
If u from india then u can call me I can fix ur problem. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
motorazrv3 said:
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
and why should he flash only kernel??
sumitverma1 said:
If u from india then u can call me I can fix ur problem 9437256037. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
Kindly provide the giudance, I am not in India now.. Explain the steps how to do..
NSatya said:
Kindly provide the giudance, I am not in India now.. Explain the steps how to do..
Click to expand...
Click to collapse
it doesn't matters where you are... Download flashtool... Install it... Then you need a firmware file for your phone... Go to http://forum.xda-developers.com/showthread.php?t=2047914.. Download whichever firmware file you want... .587 is recommended... If you want you can have .631 also... after downloading the .ftf file, place it in firmwares folder of the flashtool installed folder... open flashtool.. Click on lightning icon.. It will ask 'flashmode' or 'fastboot'.. select flashmode... Then select the .ftf which you placed now.. Uncheck 'no final verification' option... Then connect your phone to the PC by holding the back button on ur phone... After the flashing is finished, switch on your phone... its done..
cherry676 said:
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
Click to expand...
Click to collapse
I have the same situation here and i tried the above but the green led light is not turning on. Does it mean there is something wrong with my phone? I do need help with this asap. Thank you in advance!
ghennn said:
I have the same situation here and i tried the above but the green led light is not turning on. Does it mean there is something wrong with my phone? I do need help with this asap. Thank you in advance!
Click to expand...
Click to collapse
Switch off the phone.. Hold the "back" button and connect your phone to computer.. The LED should turn GREEN... It means that computer is recognising your phone.. Otherwise there might b some problem in the drivers or in the phone.. I cannot help you unless you can explain what you did before your phone entered into such state...
sony Xeperia neo L Mt 251 not turning on
sumitverma1 said:
If u from india then u can call me I can fix ur problem 9437256037. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
svahmeds said:
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
Click to expand...
Click to collapse
If LED is turning on, then its a good news that your phone is not dead. If nothing is getting displayed on the screen, then you might have fried up the internal circuitry. I have ended up with it. It cost me 25% of mobile's cost to get it repaired again.
i can't turn on my cell sony xeperia neo L mt251
cherry676 said:
If LED is turning on, then its a good news that your phone is not dead. If nothing is getting displayed on the screen, then you might have fried up the internal circuitry. I have ended up with it. It cost me 25% of mobile's cost to get it repaired again.
Click to expand...
Click to collapse
Hello
I can't turn my cell phone Sony Xeperia neo L MT251 please some on can help me
svahmeds said:
Hello
I can't turn my cell phone Sony Xeperia neo L MT251 please some on can help me
Click to expand...
Click to collapse
Flash a new ftf file. There is a guide for it. Phillip Wu's thread has all the steps. Go through the steps about flashing new stock firmware.
Xperia Neo L bricked ....
Hi All,
I think i have bricked my xperia neo l to a pretty bad shape.....Please help me ...
1)I rooted the phone sucessfully with the kit developed by DoomsLord
2)I installed the cwm recovery, took backup.
3)I did not flash the kernel but went ahead with the ICS revolution ROM Xperia NEO L:crying:
4)Installation of ICS went fine but the phone was stuck in the boot mode. Sony screen used to come and device used to boot......
Here is the stupid part..
5) I tried to go to recovery it didn`t work.. I thought maybe the kernel is a problem..I used the ICS kernel and flashed it.
Nothing works now...When i connect my cell to the laptop windows says device not recognized..I am trying to go to flashboot mode not working...Is there a way to fix it ? If yes please provide me any pointers...
mohans26 said:
Hi All,
I think i have bricked my xperia neo l to a pretty bad shape.....Please help me ...
1)I rooted the phone sucessfully with the kit developed by DoomsLord
2)I installed the cwm recovery, took backup.
3)I did not flash the kernel but went ahead with the ICS revolution ROM Xperia NEO L:crying:
4)Installation of ICS went fine but the phone was stuck in the boot mode. Sony screen used to come and device used to boot......
Here is the stupid part..
5) I tried to go to recovery it didn`t work.. I thought maybe the kernel is a problem..I used the ICS kernel and flashed it.
Nothing works now...When i connect my cell to the laptop windows says device not recognized..I am trying to go to flashboot mode not working...Is there a way to fix it ? If yes please provide me any pointers...
Click to expand...
Click to collapse
Dear friend.....
First,charge ur device at least 2hours....
When u charge ur phone,try to read carefully every step how install the custom rom u want....
After that...
-Flash full firmware via flashtool (flashmode)
Let ur phone on first...
And after ur phone works,its up to u maybe u want to continue another step to install custom rom u want....
But dont forget to flash the custom kernel recommended by the dev first before u do another step....
(flash custom kernel via fastboot)...
Hope it help and good luck.....
Sent from my MT25i using xda app-developers app
well..
Thanks for the advice ..But Windows is not recognizing the phone..When i try to flash and go into flash mode ..Pressing the back button and connecting..The flash tool says device not connected
Hi!
I have a Sony Ericsson Xperia X10. I've installed a cm9 on my phone, and i like to know, how can i install cm7, or any other GB based rom on this rom. (i've installed fxp kernel as well)
Thank you for your help!
Just install Your desired ROM and flash proper kernel. That's all
Sent from my GT-I9100 using xda app-developers app
jakuburban said:
Just install Your desired ROM and flash proper kernel. That's all
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I forgot to make a backup from my stock system, and now i can't install any 2.3 based rom, because xrecovery don't allow that because of the ICS.
Is there a possibility to download stock rom and kernel, and flash it to the phone?
Why not. Search for the firmware for your phone and flash through flashtool following the on screen instructions. Cant ttell you exact build number because im an arc user using this now because the USB port is broken.
Sent from my X10i using xda premium
Q
tangosierra_ said:
Why not. Search for the firmware for your phone and flash through flashtool following the on screen instructions. Cant ttell you exact build number because im an arc user using this now because the USB port is broken.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
So when i understand it good, then with flashtool i can flash any GB based rom on the ICS as well. Can i make it from a "zip" rom? When i flash a cm7, i don't need to change the fxp kernel.
Peet137 said:
So when i understand it good, then with flashtool i can flash any GB based rom on the ICS as well. Can i make it from a "zip" rom? When i flash a cm7, i don't need to change the fxp kernel.
Click to expand...
Click to collapse
No what im saying is that you wanna return to stock dont you. So I told you to flash a stock gb ftf using flashtool. But you do NOT flash custom Roms using flashtool, you boot into recovery and flash. And no, you can't turn a ftf into a zip
Edit; if I understood you correctly you wanted to flash cm7 ddont you... its simple... just flash the kernel through flashtool then boot into recovery and wipe everything and flash tthe rom. No need to flash stock first because the recovery is bundled in the kernel!
Sent from my X10i using xda premium
X10
tangosierra_ said:
No what im saying is that you wanna return to stock dont you. So I told you to flash a stock gb ftf using flashtool. But you do NOT flash custom Roms using flashtool, you boot into recovery and flash. And no, you can't turn a ftf into a zip
Edit; if I understood you correctly you wanted to flash cm7 ddont you... its simple... just flash the kernel through flashtool then boot into recovery and wipe everything and flash tthe rom. No need to flash stock first because the recovery is bundled in the kernel!
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I solved the problem, the phone worked properly for months, but now i can't switch on the phone. The green led blinks, the phone vibrate one time and than nothing happens. I tried to flash some firmwares, but i can't made it. Flashtool wrote that flashing and nothing happens. I tried with Omnius as well, but the software can't read flash memory and can't flash anything. I think the phone is "hard bricked". Can anyone help me to save my phone?
It sounds like your battery is dead....
Sent from my MiUI-ed Xperia arc S
\ press thanks if I've helped /
tangosierra_ said:
It sounds like your battery is dead....
Sent from my MiUI-ed Xperia arc S
\ press thanks if I've helped /
Click to expand...
Click to collapse
Thank you for your advice, I will try it this afternoon with another battery.
Peet137 said:
Thank you for your advice, I will try it this afternoon with another battery.
Click to expand...
Click to collapse
I tried it with an LG GT540 battery, but the effect was the same. But with the original battery the phone didn't vibrate yet, just blink the red notification LED 3 times, and that's all. I tried to charge the battery (not with PC, with charger) and the phone did a strange thing. First when the charger attached, the RED LED blinking and after some time it turned to GREEN and stop blinking, just lighted. After some time the green LED turns off and then nothing lights.
In my environment nobody has X10 phone, that's why I can't try another original X10 battery, but I think with the LG battery must have work as well, when the battery is the failure.
Hello I did have had this problem aswell a while ago. I have had the phone in cwm recovery while doing a backup I fell asleep next day won't turn on only vibrate 1 time and 3 red blinks after it..
I really was desperate I tried many methods even flashed a kernel with offline charging which I thought was the trick but not that I realy now off.
I did notice i could get in recovery if I connect phone in flashmode and leave it till it reboots it's own should happen within 40 secs I guess.
After I saw that it could do that why it's not booting... I did some digging but I am not sure but I guess it's a file or binary (batterystats.bin) in data/system directory somewhere which keeps track of your battery and even if you plug new full battery it simply thinks it drained of the previous saved info of your old battery. (hope someone can confirm this because I didn't find any info such about but it should make sense if you ask me)
But in the end I used Sony PC companion to reapair it from there and it worked only one weird thing I needed to do was switching from USB power adapter to PC USB to have it connect in flashmode strangely.
And after that I only needed to root etc. again.
Sent from my GT-N7000
Answer
Danny23 said:
Hello I did have had this problem aswell a while ago. I have had the phone in cwm recovery while doing a backup I fell asleep next day won't turn on only vibrate 1 time and 3 red blinks after it..
I really was desperate I tried many methods even flashed a kernel with offline charging which I thought was the trick but not that I realy now off.
I did notice i could get in recovery if I connect phone in flashmode and leave it till it reboots it's own should happen within 40 secs I guess.
After I saw that it could do that why it's not booting... I did some digging but I am not sure but I guess it's a file or binary (batterystats.bin) in data/system directory somewhere which keeps track of your battery and even if you plug new full battery it simply thinks it drained of the previous saved info of your old battery. (hope someone can confirm this because I didn't find any info such about but it should make sense if you ask me)
But in the end I used Sony PC companion to reapair it from there and it worked only one weird thing I needed to do was switching from USB power adapter to PC USB to have it connect in flashmode strangely.
And after that I only needed to root etc. again.
Sent from my GT-N7000
Click to expand...
Click to collapse
Hi!
I have found the solution last time, and it works for a while, but i don't know how.
But now we were on holiday, and I forgot the charger, and the phone was switched off for 3 days, and the problem came out again.
I have an RC car which have a LiPO charger, I made an own "connector" to that and I charged the battery with that.
Could you please tell me, how you switched from "USB power adapter to PC USB" when the phone don't switch on?
Thanks!