Related
Hi Everybody. As the title say, I am facing issues with the touch screen when i install Any CM ROM(FXP-Official)/AOSP. At the first boot I Can not unlock my phone or skip the "Tutorial". After Reboot the phone, the problem is still there
*I Flashed the BB recommend for each ROM (.72)
*I Installed the Respective Kernel via Fastboot:
- fastboot flash boot boot.img
Then
- fastboot boot boot.img
*I did a Full Wipe (Cache, Data, Dalvik)
*Format - System
*I flashed ROM
* And....Nothing
Any Solution? Anyone?
Thanks
EDIT. Every SE based ROMs (MIUI etc.) work without that BUG
EDIT. 03/03/13 AROMA Installer also does not work (Only with Vol and Menu buttons)
Jonfensu said:
Hi Everybody. As the title say, I am facing issues with the touch screen when i install CM9 FXP113/115. At the first boot I Can not unlock my phone or skip the "Tutorial"
I Installed the Kernel via Fastboot with Flash and Boot commands
I did a Full Wipe (Cache, Data, Dalvik)
Any Solution? Anyone?
Thanks
Click to expand...
Click to collapse
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
taaviu said:
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I know, I did that when i was installing FXP113 or 115 (With respective kernels) i mean the problem is with FXP Kernel and ROM .... Is there any patch or something?
UPDATE: Please Someone Help me... I tried the ICS Official Leak from here ,http://forum.xda-developers.com/showthread.php?t=1594651 and following the Instructions, i STILL get the same issue...: The Touch Screen Does not Work (Hardware buttons works) Anyone?
PS. With AOSP,Mooded and other ICS ROMs with Nightelf,Pwn etc Kernels i don't have that issue
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
sorry for my bad English
Sent from my MT15i using XDA
ash6088 said:
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
Click to expand...
Click to collapse
Sure you did flash custom kernel with "fastboot flash boot boot.img"?
Sent from my MT15i using Tapatalk 2 Beta-6
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
ash6088 said:
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
Click to expand...
Click to collapse
Pleas write here steps "how do you install MIUI or cm7-9 rom"
Thanx
Etc..
1.downloaded rom xxx.zip
2. kernel xxx.img
3. wipe?
How installed kernel/rom.
Ok, this is the procedure I follow:
1 -Flash .42 with Flashtool
2-Root
3-Unlock bootloader with fastboot (fastboot.exe-i 0x0fce oem unlock 0xMykey)
4-Install cwm recovery
5-Iput zip file downloaded to sd (ex. update-cm-7.1.0-XperiaNeo-MT15i-signed)
4-I put the kernel included in the zip into the fastboot folder and flash (fastboot flash boot boot.img)
6-I go into recovery and wipe data / factory reset, wipe cache and wipe Dalvik cache
7-Flash zip rom and GAPPS
8-Reboot
9-Phonework but touch screen does not work
I tried with pwn kernel and other but it is the same thing!
The situation that presents itself is equal to this video:
Boot ZTE Blade / Oranage San Francisco (B10) with custom rom with working touch screen(Search in youtube)
I also tried to use the technique in the video but without battery Xperia neo will not turn on.
I do not understand where I'm wrong!
First of all flash .62 ftf by flashtool...then flash the respective custom kernel for the rom...wipe everything and also format everything in cwm ...all custom kernels are pre rooted and cwm recovery ready...now flash the rom and see if it works.
Sent from my MT11i using XDA
Cm7 cm9 n miui need .64 baseband not .42 so flash the
Baseband of .64 or rather fresh install .62 firmware
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Then some experienced dev is needed here...they can give some advice.
Sent from my MT11i using XDA
Some developer, PLEASE.... HELP US!!
ash6088 said:
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Click to expand...
Click to collapse
Is zdunex miui ics working?
It uses stock kernel.
Sent from my MT15i using Tapatalk 2
If I use the stock kernel the touchscreen works perfect, but only with the stock kernel
The problem is still here... I tried Every ROM based on CM9 (since FXP129 to CM9 RC2 Official) or AOSP (Polish Blood 4.04) and don't work... Others ROM based on SE (MIUI etc.) Work flawless... WE NEED SOME DEVS HERE, Please...
please, no one can solve this problem ???
Lemme try.
Flash the latest Stock firmware. Boot it up, and go thru the whole setup process. Stock FTF usually got no probs when it comes to hardware.
Run the phone in Stock for awhile (1-2mins), then shut it off. Go into fastboot mode (press and hold "Menu" button while plugging into PC) and flash the kernel from the LATEST version of the ROM you want to use (FXP146 for CM9.1/CM10, FXP110 or something for CM7.2, MIUI2/MIUI4/MIUI4.1). It is usually in the zip itself or the dev would have recommended a kernel. If you don't know how to flash the kernel, PM me.
Boot up phone into recovery, flash new ROM, flash gapps, reboot phone.
BOOM all should be ok
Installed MESA HYBRID 4.3 Yesterday and i am not able to install any CM10/10.1 based ROM
Whether it be PACman/CM/AOKP or the unofficial Cm10.1 by shufuking.
Everytime i try to install any rom except Stock based ICS Rom's I get a STATUS 7 error
Tried removing the first three lines from the updater script and it still dosent work
Re: Trouble installing CM10./10.1
Million threads on status 7 error, give some of them a read.
Sent from Myushi
Been there,done that
Tried everything before posting
Thats the only reason I posted it here on XDA
BTW,ICS ROMs install fine...all of em actually !
antechx said:
Been there,done that
Click to expand...
Click to collapse
You've only listed one thing you've tried, but if you have tried everything else then god knows.
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
dekanayanjyoti said:
status 7 error means you formatted the system. Never format system. Try a google search. you will get xda links of people explaining how to recover from that.
http://forum.xda-developers.com/showthread.php?t=1884746
this thread will help.
Click to expand...
Click to collapse
Thanks for the help , but unfortunately this didnt helped me either...
Tried installing the ROM without Formatting the system while wiped the data and cache .
Still gives me the ****ty status 7 error .
@XperienceD - Even tried FXP 213 and MIUI 142.
Gives the same error.
Re: Trouble installing CM10./10.1
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Mysteryagr said:
This happens to me too.
So the best solution for now. Flash the roms you want using the provided kernel.
Then take a backup, flash Mesa, switch between roms via restoring them from recovery.
I do so
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
I know that will work, but I really wanted a workaround for this :/
Switching kernels every time isn't a solution after all
You dont delete system for first instal JB
SalyczeQ said:
You dont delete system for first instal JB
Click to expand...
Click to collapse
Still gives the error :[
Got any other solutions ?
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Trzepaczka said:
I had this problem as well. I searched through google and found out the solution is to flash a newer version of CWM which actually worked for me. I couldn't find a separate package with CWM but I found a kernel containing it. Everything has been fine since then.
Click to expand...
Click to collapse
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
antechx said:
Flashed to a newer version of CWM ?
I guess MESA already has CWM6.xx
You found a kernel containing it means ? Most of the kernels already use CWM as default recovery I guess
Click to expand...
Click to collapse
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
MESA also uses dual recoveries and TWRP as default.
What did he exactly meant ?
Flash another CWM on top of the pre-installed recovery ?
?? Anyone ? knows how to update CWM ?
antechx said:
?? Anyone ? knows how to update CWM ?
Click to expand...
Click to collapse
if you have unlocked bootloader, try some of the kernels which use newer cwm or twrp.
if on locked, i think xparts installs latest cwm.
antechx said:
Still gives the error :[
Got any other solutions ?
Click to expand...
Click to collapse
Flash boot.img (in the zip by rom)
Install Zip
Install Gapps
Wipe data (do this first and only once and never do it again)
then flash custom kernels ..
mnishamk said:
Lupus uses twrp, actually the newer kernels come either as dual or with twrp.
Click to expand...
Click to collapse
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
TWRP has problems with our the 2011MDPI's ?
antechx said:
TWRP has problems with our the 2011MDPI's ?
Click to expand...
Click to collapse
no
---------- Post added at 09:41 PM ---------- Previous post was at 09:37 PM ----------
aftergr said:
!I hope not cause twrp only,are bad news
Actually will not happen cause this recovery has problems with our phones
Sent from my ST15i using xda app-developers asp
Click to expand...
Click to collapse
i m using lupus twrp,no problem
hi
i have an xperia mini pro ( sk17i) , i downloaded latest nightly version of pacman 4.3 (pac_mango_4.3-build.1.RC_20130826-214437.zip)
i flashed kernel inside the zip with fastboot , and wiped cache and dalvic cache and did a factory reset .
after i boot my soft keys ( back and menu ) are not working also my touch screen is disabled .
tip : softkeys are not wrking in cwm either .
can any one help me ?
mohscorpion said:
hi
i have an xperia mini pro ( sk17i) , i downloaded latest nightly version of pacman 4.3 (pac_mango_4.3-build.1.RC_20130826-214437.zip)
i flashed kernel inside the zip with fastboot , and wiped cache and dalvic cache and did a factory reset .
after i boot my soft keys ( back and menu ) are not working also my touch screen is disabled .
tip : softkeys are not wrking in cwm either .
can any one help me ?
Click to expand...
Click to collapse
Sounds like you flashed the wrong ROM for your device (touchscreen not working is a first sign of that), try using the methods from these threads to get everything working again:
http://forum.xda-developers.com/showthread.php?t=2366426
http://forum.xda-developers.com/showthread.php?t=2061687
http://forum.xda-developers.com/showthread.php?t=2104484
Hope I've helped you
If you have the xperia mini pro and flashed the mango version there should be no problem regarding the device
Try flashing the stock rom using flashtool and see what happens. If it's still not working try to use the methods listed in my thread on how to fix a broken touchscreen
Sent from my Nexus 4 running Android 4.3
mohscorpion said:
hi
i have an xperia mini pro ( sk17i) , i downloaded latest nightly version of pacman 4.3 (pac_mango_4.3-build.1.RC_20130826-214437.zip)
i flashed kernel inside the zip with fastboot , and wiped cache and dalvic cache and did a factory reset .
after i boot my soft keys ( back and menu ) are not working also my touch screen is disabled .
tip : softkeys are not wrking in cwm either .
can any one help me ?
Click to expand...
Click to collapse
Hmmm...you should NEVER DO FACTORY RESET unless the dev of the ROMs said so....that the reason why your touch screen and soft keys didn't works....
mihahn said:
If you have the xperia mini pro and flashed the mango version there should be no problem regarding the device
Try flashing the stock rom using flashtool and see what happens. If it's still not working try to use the methods listed in my thread on how to fix a broken touchscreen
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
first of all where is your thread , can you give the address?
i used mango version .
iPusak Gaoq™ said:
Hmmm...you should NEVER DO FACTORY RESET unless the dev of the ROMs said so....that the reason why your touch screen and soft keys didn't works....
Click to expand...
Click to collapse
how can i fix that?
Grof87 said:
Sounds like you flashed the wrong ROM for your device (touchscreen not working is a first sign of that), try using the methods from these threads to get everything working again:
http://forum.xda-developers.com/showthread.php?t=2366426
http://forum.xda-developers.com/showthread.php?t=2061687
http://forum.xda-developers.com/showthread.php?t=2104484
Hope I've helped you
Click to expand...
Click to collapse
i am pretty sure that i have used correct version , mango .
mohscorpion said:
first of all where is your thread , can you give the address?
i used mango version .
Click to expand...
Click to collapse
Check my signature or the stickies in the general forum
But first of all try flashing the stock rom for mango using flashtool
Sent from my Nexus 4 running Android 4.3
i notices a new nightly version came out , i will test with that again first
and thnx for the help
i hope this solves my problem:cyclops:
nope new version also didn't work , my keyboard works but touch screen and back and menu button don't work.
Solved
Pls follow the correct procedure and flash the correct rom and check the md5 of ur rom.
If u wanna do a factory reset then do it 1st otherwise dont do at all.
I m using pacman too but dont have any prob.
If u r coming from other roms then do a factory reset then clear the cache and dalvik then mount the system and flash the rom.
Then clear just cache and dalvik and flash the gapps. Then clear cache and dalvik again and fix permission and reboot the system.
This will clear all the problems
what kernel i must install to have a pacman 4.3
to other member....i newbie in here...i just want to ask...which kernel must i installin pacman 4.3??? (sorry for bad english)
Farid Exotic said:
to other member....i newbie in here...i just want to ask...which kernel must i installin pacman 4.3??? (sorry for bad english)
Click to expand...
Click to collapse
The one included in the downloaded zip file of the rom
Or any other 4.3 kernel
Sent from my Nexus 4 running Android 4.3
the kernel
mihahn said:
The one included in the downloaded zip file of the rom
Or any other 4.3 kernel
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
if the kernel inside zip...can you show me which folder the kernel ???
and...can i install this kernel for P.A.C 4.3...in this link
http://forum.xda-developers.com/showthread.php?t=2247466
Farid Exotic said:
if the kernel inside zip...can you show me which folder the kernel ???
and...can i install this kernel for P.A.C 4.3...in this link
http://forum.xda-developers.com/showthread.php?t=2247466
Click to expand...
Click to collapse
When you extract the zip there should be a boot.img. It's just there, not in any folder
Sent from my Nexus 4 running Android 4.3
mihahn said:
When you extract the zip there should be a boot.img. It's just there, not in any folder
Sent from my Nexus 4 running Android 4.3
Are you sure...boot.img not ftf format??? How to install boot img format using flashtool???
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Farid Exotic said:
mihahn said:
When you extract the zip there should be a boot.img. It's just there, not in any folder
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Are you sure...boot.img not ftf format??? How to install boot img format using flashtool???
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
That's it. A custom kernel is a boot.img no .ftf
You need an unlocked bootloader to flash it in fastboot mode. Please just check my guide on how to install a custom rom/kernel and do a lot of reading before flashing any rom/kernel
Sent from my Nexus 4 running Android 4.3
mihahn said:
That's it. A custom kernel is a boot.img no .ftf
You need an unlocked bootloader to flash it in fastboot mode. Please just check my guide on how to install a custom rom/kernel and do a lot of reading before flashing any rom/kernel
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Now I can taste jellybean 4.3....but this have one bug...my touchscreen have a maintance.sometimes...the touchscreen is work...but sometimes cant work...you can help me...i have to rebuild hw.config.sh and touch.mango.hitachi...please help me....
Sent from my Xperia Mini Pro using xda premium
when i install this rom , my touch works sometimes but mostly doesn't work , also my back and menu buttons
but when i flash the ftf standard xperia enhanced rom e3, everything works
i flashed new version of pacman exactly as written and again i have touchscreen problems .
i used the kernel in the zip file .
but again i had to flash ftf again , but it is not rooted , i am very confused , i use mango version for my xperia mini pro .
any suggestions?
any ideas?
Bump
Hi.
I just installed CM10, and works well, but still has some bugs. Keyboard crazy with power supply, does not switch properly between Wifi and 3G ...
I wonder if changing only the kernel of other ROM's (fastboot ... boot.img) I could try to fix it.
Thanks in advance.
jimbolo said:
Hi.
I just installed CM10, and works well, but still has some bugs. Keyboard crazy with power supply, does not switch properly between Wifi and 3G ...
I wonder if changing only the kernel of other ROM's (fastboot ... boot.img) I could try to fix it.
Thanks in advance.
Click to expand...
Click to collapse
Not sure, u can try... mine works well on stock ICS with deleted bloatware. try flashing stock ICS.
you can try custom kernels but only those which are compatible with cm10 u can not flash a kernel that is for another rom that is stock based or on another cm based the kernel must be for cm10 only
garvitdelhi said:
you can try custom kernels but only those which are compatible with cm10 u can not flash a kernel that is for another rom that is stock based or on another cm based the kernel must be for cm10 only
Click to expand...
Click to collapse
Thank you. I'll look carefully.
pa4ka16 said:
Not sure, u can try... mine works well on stock ICS with deleted bloatware. try flashing stock ICS.
Click to expand...
Click to collapse
Do you refer to Sony ROM? I'll look something too.
Thanks you.
jimbolo said:
Hi.
I just installed CM10, and works well, but still has some bugs. Keyboard crazy with power supply, does not switch properly between Wifi and 3G ...
I wonder if changing only the kernel of other ROM's (fastboot ... boot.img) I could try to fix it.
Thanks in advance.
Click to expand...
Click to collapse
Try SimbyProject, very nice rom, its cm 10 and new kernel...multitasking is working, smooth and fast...
Sent from my Xperia Sola using xda app-developers app
Speedy Sola v5 on eXperience Innovation
Hello guys,
I have a similar question, I have tried to install some kernel after the rom is installed, and after that the phone doesn't boot, I did it through fastboot with different kernels and roms, I tried with Divaksh (eXperience v2 and Innovation v1.1) rom's and with Speedy Sola v5.5 or Munjeni's v5, is this normal?, how can I only flash the kernel?
Edit: Also first I installed Speedy Sola v5.5 and later eXperience Innovation v1.1 and kernel Speedy disappeared.
Thank for your replies!
JOANYMARIO said:
Hello guys,
I have a similar question, I have tried to install some kernel after the rom is installed, and after that the phone doesn't boot, I did it through fastboot with different kernels and roms, I tried with Divaksh (eXperience v2 and Innovation v1.1) rom's and with Speedy Sola v5.5 or Munjeni's v5, is this normal?, how can I only flash the kernel?
Edit: Also first I installed Speedy Sola v5.5 and later eXperience Innovation v1.1 and kernel Speedy disappeared.
Thank for your replies!
Click to expand...
Click to collapse
Usually rom in zip contains kernel, so if you flash rom kernel anf then rom you will end up with kernel from rom. When you fastboot lernel, be sure your bootloader is unlocked and makd kernel you downloaded is for your device and it is right fof your kind of rom, stock cyanogenmod,...
After you flash kernel over fast boot then when you start the phone go directly to clockworkmod and wipe cache and dalvik. After that reboot and it should boot.
One exception, of course, if you want use experimental kernel, flash via cwm as it contains not only kernel but even updated libs.
Sent from my Xperia Sola using xda app-developers app
matood said:
Usually rom in zip contains kernel, so if you flash rom kernel anf then rom you will end up with kernel from rom. When you fastboot lernel, be sure your bootloader is unlocked and makd kernel you downloaded is for your device and it is right fof your kind of rom, stock cyanogenmod,...
After you flash kernel over fast boot then when you start the phone go directly to clockworkmod and wipe cache and dalvik. After that reboot and it should boot.
One exception, of course, if you want use experimental kernel, flash via cwm as it contains not only kernel but even updated libs.
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Thank you very much for information!!
matood said:
Usually rom in zip contains kernel, so if you flash rom kernel anf then rom you will end up with kernel from rom. When you fastboot lernel, be sure your bootloader is unlocked and makd kernel you downloaded is for your device and it is right fof your kind of rom, stock cyanogenmod,...
After you flash kernel over fast boot then when you start the phone go directly to clockworkmod and wipe cache and dalvik. After that reboot and it should boot.
One exception, of course, if you want use experimental kernel, flash via cwm as it contains not only kernel but even updated libs.
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Also thanks for the info, I didn't know that you lost the Kernel after installing a new ROM, but I have find my problem, Speedy Sola v 5.5 doesn't work on JB ROM for the moment.
Hi there. I've got a flashing question for you guys. I'm currently on cm11 snapshot m8 with xperia z2. I'm looking to flash back to stock some can get the use of my stock camera and just use xposed framework for customisation. However, I don't currently have access to a computer and won't have anytime soon. So I'm looking for a cwm method. Even a rom based on stock that I can flash over cm after a reset and wipe as long as I get my stock camera back I'm happy. Any suggestions?? Thanks in advance!
Sent from my Xperia Z2 using XDA Free mobile app
Fraser1978 said:
Hi there. I've got a flashing question for you guys. I'm currently on cm11 snapshot m8 with xperia z2. I'm looking to flash back to stock some can get the use of my stock camera and just use xposed framework for customisation. However, I don't currently have access to a computer and won't have anytime soon. So I'm looking for a cwm method. Even a rom based on stock that I can flash over cm after a reset and wipe as long as I get my stock camera back I'm happy. Any suggestions?? Thanks in advance!
Sent from my Xperia Z2 using XDA Free mobile app
Click to expand...
Click to collapse
download a stock based kernel, cwm recovery or doomkernel and a stock based rom, , deodexed or something stock based
Okay, take it you mean a pre-rooted stock based rom with Cwm included? So I would flash the stock based rom first, followed by the stock based kernel, followed by gapps? Is that right? What wipes are necessary inbetween? Thanks buddy!
Sent from my Xperia Z2 using XDA Free mobile app
Fraser1978 said:
Okay, take it you mean a pre-rooted stock based rom with Cwm included? So I would flash the stock based rom first, followed by the stock based kernel, followed by gapps? Is that right? What wipes are necessary inbetween? Thanks buddy!
Sent from my Xperia Z2 using XDA Free mobile app
Click to expand...
Click to collapse
stock based as in anything stock based, deodexed, prerooted, tweaked etc
gapps isnt needed for stock based
cwm included in roms arent neccisary
dont need to wipe when you install a kernel
wipe cache and dalvik when switching roms
wipe data if your switching base aka cm11 to aokp, or aokp to stock