I am using XPERIA Neo V (MT11i) yesterday my phone slipped off from my hand and struck on the floor facing the screen
The screen damaged severely and touch stopped responding but there is no sign of crack or any kind of LCD display malfunctioning so I decided to repair it and change the DIGITIZER by myself but after watching touch screen (digitizer) repairing videos on youtube I got little confused because in most of the videos I have seen even the screen got severely damaged they were still working but mine is not so I'm wondering even if I purchase a digitizer and install it on my phone but if it might not work then.
So my question is should I purchase a new DIGITIZER available on ebay and repair it by self as its easy to repair it at home? or should I go and repair it from SONY service center or local mobile repair shop but there are two threats:
1). If I go to SONY service center they will charge high (Because for an old phone I don't want to spend more money).
2). If i go to local repair shop they might not use a good quality digitizer which could lead to issues soon or affect overall touch experience.
SCREENS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your digitizer looks pretty cracked so perhaps replacing the digitizer will work. PERHAPS. You should go ahead and repair it at home because parts for old phones are pretty cheap and if you are comfortable, what do you have to lose?
Sent from my SGH-M919 using XDA Free mobile app
Sure I will repair it in home.
Thanks
My Devices: Moto E (XT1022) <- SE Neo V (MT11i)
Related
I have a problem with SXU screen. First I have some kind of "bleeding screen" on the left edge of screen. In my country (Serbia) in Sony service center (ComTrade) told me that is a normal and that my complaint not justified. I also have one green stuck pixel in lower right angle of screen. I noticed it 6 days after purchase. But Sony service center and retailer didn't want to acknowledge the complaint. They told me that one or two defective pixels is acceptable. What's worse this is the third Xperia U phone that I have a problem with him. The first one I returned because of 4-5 defective pixels. The second one I returned because it was totally dead. And now one stuck pixel. It amazes me the Sony quality control check and after-sales service, at least in my country. I know that first problem I can't solve but what about stuck pixel. Any solution? Phone is old 3 weeks. Please help!!!
Some kind of "bleeding screen", is it normal?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've got the same "bleeding screen" issue, but i really don't mind it, i think it's normal.
And I think that stuck pixels are kinda normal thing, you can try "waking" them up by some LCD checking apps, which display RGB colors on your screen fastly - i had frozen pixel issue on my psp and it worked. To sum up - sony don't have to take that under warranty.
Sent from my ST25i
"bleeding screen" is not an issue, that's the way LCD's are glued...that's ok.
I have one dead pixel and Sony say the warranty covers only up to 4 dead pixels...well, screw them
Akso my screen is bleeding
Sent from my ST25a using xda app-developers app
Good Day All,
I am in a bit of a predicament. On Saturday, I had my phone in hand and heard a *crack* (I can only suppose my subconscious telekinetic powers were left on), looked down and noticed that there was a somewhat small crack about 1.5 inches up from the back capacitive button all the way across to the home cap button. Basically making any key presses in that lower region of my screen and cap buttons unusable.
I just watched the YouTube tear down video and I'm curious as to if I purchase the Touch Digitizer Screen Assembly(See pics below) will this cover everything that I need for the replacement?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I found a US supplier on eBay with it for $170.99 with a decent ship time (4 business days).
--I have noticed that Most of the non-ebay suppliers are out of stock on the digitizer all together.
Any suggestions/advice is much appreciated.
can't u just take it to a fixer it's the safest way if ur nervous
Blackwolf10 said:
can't u just take it to a fixer it's the safest way if ur nervous
Click to expand...
Click to collapse
Because the local "fixers" are gonna want to charge a markup on the actual screen/assembly while still adding on for repairing the damage. Versus actually buying the part myself and giving it to them to fix(Which is also a probably option).
Have you contacted LG. I heard they do the repairs too. It's obviously much safer and I think cheaper.
hi all,
broke my xperia z ultra c6806 screen.
what part do i need to fix it?
will this suffice, or is there other properties i need to purchase?
http://www.ebay.com/itm/New-Touch-S...e_Replacement_Parts_Tools&hash=item5b040c31bf
i have also provided a pic of my phone in its current state.
thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pic isnt working for some reason, here is direct url
http://oi58.tinypic.com/wuotgo.jpg
asadkhanduhh said:
hi all,
broke my xperia z ultra c6806 screen.
what part do i need to fix it?
will this suffice, or is there other properties i need to purchase?
http://www.ebay.com/itm/New-Touch-S...e_Replacement_Parts_Tools&hash=item5b040c31bf
i have also provided a pic of my phone in its current state.
thanks
pic isnt working for some reason, here is direct url
http://oi58.tinypic.com/wuotgo.jpg
Click to expand...
Click to collapse
You will probably want the glue/stickietape for the back and front closure. I'm not sure if it is a clamp fix or glue for the ribbon cable, I seem to remember someone having trouble with a screen replacement
@asadkhanduhh From what I can ascertain from your photograph, you do not need the digitizer panel as I cannot see any break in the glass.
It is the LCD panel that has broken, suggested by the lines of color running up and down and across the screen, It might not be a bad idea to get the digitizer panel aswell, if it is broken, or in case you do break it whilst opening the phone up, and if so, you might aswell purchase a pre-assembled LCD panel & Digitizer unit to save cost and effort in separating the glass from the LCD panel.
thank you two for your replies.
i will keep the repair progress updated.
thanks again.
Hi . Yesterday i went to sony mobile and they test my phone with a machine to make sure it is sealed properly. After the machine test, the sony staff dip into tap water..
When i went back home..my camera condense and the screen became like this :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But, everything is functional.
Please don't recomment to go to sony centre again as it is very far from my home .. :crying:
Please help .. :crying:
Hi,
I would actually , place in a bucket of uncooked dry rice with flaps open. Totally submerged. A day or so , rice will draw out the moisture.
3vilArt_ said:
Hi . Yesterday i went to sony mobile and they test my phone with a machine to make sure it is sealed properly. After the machine test, the sony staff dip into tap water..
When i went back home..my camera condense and the screen became like this :-
But, everything is functional.
Please don't recomment to go to sony centre again as it is very far from my home .. :crying:
Please help .. :crying:
Click to expand...
Click to collapse
Save a phone bag is a product that I've seen retailing in the US. It's a plastic bag with some dessicant that absorbs the moisture right from the phone. It also has a indicator that changes color when all the water has been drawn out. Do check if it is available in Australia.
Sent from my HTC Desire 616 dual sim using Tapatalk
Very unfortunate, the main screen of my brand new Oppo Find N is already broken. I haven't dropped it or covered it with dust or sand, just had it in my pocket for 5 days. When I opened it today there was this white line. With the finger i felt a piece of dust beneath the screen - the hinge seems not very safe against dust from the pocket. It reminds me of the first Galaxy Fold which was very sensitive. Very unfortunate. I hope no one else has a similiar issue, I'll send it back for warranty coverage...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wooooow
Thats a bit concerning…
That is very concerning for sure. I spent a lot of money for the phone and question the type of warranty I will get from the seller I purchased from. I had not even thought about this outcome before and has me very concerned for sure.
Wooh this is not good... Hope you can get some help with the seller or through de warranty....
Cheers
Did you resolve the issue via seller or source a repair (presumably screen replacement?) - I'm looking at a phone with a similar issue - did it need to go back to china to be repaired & did that happen okay?
I'd be interested in your outcome
OP no longer posts in XDA forums hence no matter whether his phone was repaired or not, it seems he moved to iOS.
Device was replaced.
where did you get your device replaced? I have the exact same thing happened to my phone!
Same question. I have a black dot (diameter 0,4 cm ) on the unfolded screen