[q] please help unbrick my s4 mini clone - Android Q&A, Help & Troubleshooting

Hello Guys,
I am new to the Android world. I got a s4 mini clone android phone.(Model:GT i9190) few days back. I
rooted with framaroot app successfully. Thats all i probably know about android then so i did not
make any backup,or even know the ram,rom or processor of my phone. I was able to also install the
Rosemary font successfully on my phone. The problem occured when i was trying to change the font to a
bold type of the same font and my phone got stuck in boot loop. It charges, boot to the Samsung logo,
I can enter to the recovery mode, I have wipe cache partition, wipe factory data, reboot and its
still stuck at the samsung logo.
I have also dowwnloaded the Sp flash tool , tried to download a new rom on my phone but all failed,
though i think i have the wrong rom. this are the errors i get while trying to download
BROM ERROR: S_DA_EMMC_FLASH_NOT_FOUND (3144) ,
BROM ERROR:S_FT_ENABLE_DRAM_FAIL (4032) and
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL (5054) .
I got this errors using different key combinations. As my
PC no longer detects my fone, i use the Meta mode to try to flash or download a new rom. You can the
pictures i have attached. I need help from the members of this great forum. i have read similar
problems and tried them but all to no avail. I must mention that i have tried the methods on win7 and
8 ,on my window 8 i have disable what will not make usb install. cant rember the name at the moment.
I have also used usbdeview to uninstall drivers and install back. Its been five days now. I dont know
if anyone having similar rom can help out. I have tried about 2 roms and both did not work. I have
tried Yuweng and Havunen methods. the flash is not working so am guessing i have a wrong rom. Please
any one that has it can help me with it. Its been five gruesome days for me.
Before it got stuck in bootloop, when the phone is connected to my Pc ,Samsung Kies shows (Serrano3g).
Welda

Don't know about clones or anything but you could try downloading the rom from sammobile.com
And then flash with Odin, go into bootloader mode first

More Information on the Phone
From what i have learn here, i don't think original samsung firmware works for clones. I am able to get the factory mode on the phone though its in chinese so i dont understand it but am
able to get some of the phone's details like:
BB Chip : MT6572
MS Board : serrano3g
IMEI : xxxxxxxxx
Modem Version : MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/09/24 12:14
BAR CODE: xxxxxxxx
BUILD TIME : 2014 04 10 CST
KERNEL VER. : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP
PREEMPT Thur Apr 10 22:00:27 CST 2014
ANDROID VER.: 4.2.2
SW VER.: ALPS.JB3.MP.V1
CUSTOM BUILD VERNX v.s 140410
I dont know if anyone is here with similar experience that can help me with the Chinese. I will post the screen shot.

weldamea said:
From what i have learn here, i don't think original samsung firmware works for clones. I am able to get the factory mode on the phone though its in chinese so i dont understand it but am
able to get some of the phone's details like:
BB Chip : MT6572
MS Board : serrano3g
IMEI : xxxxxxxxx
Modem Version : MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/09/24 12:14
BAR CODE: xxxxxxxx
BUILD TIME : 2014 04 10 CST
KERNEL VER. : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP
PREEMPT Thur Apr 10 22:00:27 CST 2014
ANDROID VER.: 4.2.2
SW VER.: ALPS.JB3.MP.V1
CUSTOM BUILD VERNX v.s 140410
I dont know if anyone is here with similar experience that can help me with the Chinese. I will post the screen shot.
Click to expand...
Click to collapse
Hi man
I need your rom
Not all of it
I need this parts
Preloader, uboot, boot, recovery, logo
Please man i need this partitions
You can just give me them as ROM_0 file
Please man my phone is dead from about one month
And you are the only one who can give me some help

What is your partition type?
I got this my fone running and then bricked it again. So its not coming at all but i can help you with the rom. What is the partition type of your phone so i can be sure am sending you the right rom?

weldamea said:
I got this my fone running and then bricked it again. So its not coming at all but i can help you with the rom. What is the partition type of your phone so i can be sure am sending you the right rom?
Click to expand...
Click to collapse
My memory is a 512mb nand chip and the file system is ubifs
And i need only the parts that i told you about
And what about you?
What is your problem right now?
May be i can give you a hand in this
P.S: i need your phone's rom
Because the roms on the net do not match my lcd drive

hellooooooooo, where are you maaan??????

need help also
hello my friends . i'am happy that finally i found someone who has the same phone as me . please could any of you two give me the link to the rom or do me a backup of his
i really messed up my phone and now for about 3 months my phone is dead
please help

Related

[Q] rooting MTK6575 I9500 S4-clone,: tried and failed...

Hi all,
Let me first thank you for the wonderful website that you've created here, it already really helped me out.
Now, I want to root my fake Galaxy S4. I know the pain of people who ask questions without trying to look around for a solution themself. Yet, after a few full days, starting without any knowledge of smartphones, working my way trough all the terminology and trying to root my device... the only thing I know left to do is asking for your help. I sincerely hope this is 1) the right place 2) I'm allowed to ask this here and 3) there is not already a simliar topic... If I still failed then feel free to redirect me, move me, etc.
I bought the following device:
Hardware : MT6575 (SAMSUNG is aFake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130606-103654
Android v : 4.2.2
Baseband v: MAUI.11AMD.W11.50.SP.V37, 2013/05/06 11:21
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Thu Jun 6 18:33:27 CST 2013
This is what I did:
Drivers:
- I've downloaded and succesfully installed pda drivers.
- I've manually installed MT6575_USB_VCOM_drivers by connecting my phone while holding the volume button. These drivers appear, but disappear again in the Device Manager.
Tried Roots:
- This one of course. But the 'Restore button' does not pop up.
- SRSRoot - does not work
- New graphical method for MTK6589,MTK6577,MTK6575 - does not work
- Manual way directed via MTK Droid Root en Tools:
I failed here at step 7. Mtk drooid Root does not make the CWM automaticly.
Furthermore:
- Tried removing all user data in Recovery Mode, but when I press the power button to select the option it simply does not react.
- I can not enter 'download mode' as far as I know.
- I know there are more methods in Gizbeat 101, but I can't acces them right now... as I'm not a full member there and somehow got instabanned.
- I have the idea they could help me at the Russian fora.. I found this thread with help of google translate... but I don't speak Russian and can't figure out what to do.
Can anyone help me out? This phone has hardly any internal storage. I can't remove most of the applications and a lot of appliacations first install on it's internal memory. If I can't root it, then I can't really use any new applications, since there is no room.
One more question: Am I right if I say I could flash the phone without rooting it? Only that there are at the moment no mtk6575 roms to flash on it?
You're my last resort, else I'll just accept the phone is unrootable and probably buy a new one.... Any help would be much appreciated!
i did factory reset - and network signal is gone for the same above fone
do u have any solution
i tried all possible solutions
some say it is 2.3 not 4.2.2
do u have rom (cumsum)
when i tried to restore data - it said cumsum match error
kingvasudev said:
i did factory reset - and network signal is gone for the same above fone
do u have any solution
i tried all possible solutions
some say it is 2.3 not 4.2.2
do u have rom (cumsum)
when i tried to restore data - it said cumsum match error
Click to expand...
Click to collapse
Hey man,
I think it's not possible to make a full back-up without rooting the phone is it? Else I'll be glad to help you out.
I can make a scatterfile with the mtkdroidrootprogram.. but the 'backup' button in mtkdroidroot is grey.
If you tell me how to make a backup I'll gladly help.
So I probably shouldn't just try and flash my phone? Good chance I brick it...
Best regards,
R.
ps. I'm dutch but happened to be in Hyderebad not so long ago
I got root on a s4-clone with the same specs as the first poster.
I used Cydia Impactor.
I can not attach links, so just google it.
megabirger said:
I got root on a s4-clone with the same specs as the first poster.
I used Cydia Impactor.
I can not attach links, so just google it.
Click to expand...
Click to collapse
Thanks for your reply! But...
Cydia Impactor does not recognize my phone. (errormsg: "/data/local/tmp/impactor-5" or "no such device")
Which drivers did u use?
S3 Mini Clone Korea
any of you know how i can root may s3 mini clone korea mtk 6575? any info would be appreciated! thanks a bunch!
chubywoobee said:
any of you know how i can root may s3 mini clone korea mtk 6575? any info would be appreciated! thanks a bunch!
Click to expand...
Click to collapse
i also have the same unit and i tried every rooting method but no success. What i did is i just install superuser app and it works. hope this help. cheers.
HydraNL said:
Hi all,
Let me first thank you for the wonderful website that you've created here, it already really helped me out.
Now, I want to root my fake Galaxy S4. I know the pain of people who ask questions without trying to look around for a solution themself. Yet, after a few full days, starting without any knowledge of smartphones, working my way trough all the terminology and trying to root my device... the only thing I know left to do is asking for your help. I sincerely hope this is 1) the right place 2) I'm allowed to ask this here and 3) there is not already a simliar topic... If I still failed then feel free to redirect me, move me, etc.
I bought the following device:
Hardware : MT6575 (SAMSUNG is aFake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130606-103654
Android v : 4.2.2
Baseband v: MAUI.11AMD.W11.50.SP.V37, 2013/05/06 11:21
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Thu Jun 6 18:33:27 CST 2013
This is what I did:
Drivers:
- I've downloaded and succesfully installed pda drivers.
- I've manually installed MT6575_USB_VCOM_drivers by connecting my phone while holding the volume button. These drivers appear, but disappear again in the Device Manager.
Tried Roots:
- This one of course. But the 'Restore button' does not pop up.
- SRSRoot - does not work
- New graphical method for MTK6589,MTK6577,MTK6575 - does not work
- Manual way directed via MTK Droid Root en Tools:
I failed here at step 7. Mtk drooid Root does not make the CWM automaticly.
Furthermore:
- Tried removing all user data in Recovery Mode, but when I press the power button to select the option it simply does not react.
- I can not enter 'download mode' as far as I know.
- I know there are more methods in Gizbeat 101, but I can't acces them right now... as I'm not a full member there and somehow got instabanned.
- I have the idea they could help me at the Russian fora.. I found this thread with help of google translate... but I don't speak Russian and can't figure out what to do.
Can anyone help me out? This phone has hardly any internal storage. I can't remove most of the applications and a lot of appliacations first install on it's internal memory. If I can't root it, then I can't really use any new applications, since there is no room.
One more question: Am I right if I say I could flash the phone without rooting it? Only that there are at the moment no mtk6575 roms to flash on it?
You're my last resort, else I'll just accept the phone is unrootable and probably buy a new one.... Any help would be much appreciated!
Click to expand...
Click to collapse
please send me your backup, i will make cwm 6.0.3.0 recovery for you.
make your backup with mtk droid tools 2.3.8 . connect phone with usb, click on root . it will root temporary . click on the bakup . creat backup and upload on the 4share or any other place and send me link.
i will make cwm recovery for you if you like TWRP recovery i will make also for you
try
try kingoapp i rooted my phone with the same chipset of yours.. just give it a try..
reminders:
+allow usb debugging
+ur pc needs internet connection
+remove sd card
+do factory reset
just google about kingoapp since i cannot post a link here because i am new member...
Porklo said:
try kingoapp i rooted my phone with the same chipset of yours.. just give it a try..
reminders:
+allow usb debugging
+ur pc needs internet connection
+remove sd card
+do factory reset
just google about kingoapp since i cannot post a link here because i am new member...
Click to expand...
Click to collapse
Thanks for the tip.
Won't the factory reset brick my phone? Since it won't install the hacked ROM?
I tried it without the factory reset but it says "This is not a real Samsung." Will that really change if I factory reset :S?
Try Farmaroot Application buddy. It will work.
forever king said:
Try Farmaroot Application buddy. It will work.
Click to expand...
Click to collapse
Your device seems not vulnerable to exploit included in Framaroot
HydraNL said:
Your device seems not vulnerable to exploit included in Framaroot
Click to expand...
Click to collapse
Oh, then did you tried " TPSparkyRoot" method? and sorry, i thought you're using mt6577.
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
ahmadw said:
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
Click to expand...
Click to collapse
Just fyi, if you still wanna know:
In 3e, you can execute the commands by hitting the lower left touch key, think it's the menu button took me like forever to figure that out
Anyways, I probably got the same mobile, it is a mtk6575. But I am not sure which custom rom I could install safely. Which one worx for sure?!
Eroot
ahmadw said:
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
Click to expand...
Click to collapse
Man! After several hours and efforts on trying root my chinese s4 clone, I saw your post about eroot!
It just worked like a charm!
Thank you!
Hi guys,
I have a S4 mini clone with the follow config:
--About the phone info
Device Name: GT-I9190
Model number: GT-I9190
Android version: 4.2.2
Baseband version: I9190XXUAMF5
Kernel Version: 3.4.0-849021 [email protected]#1 Thu Jun 13 16:52:08 KST 2013
Build Version: JDQ39.I9190XXUAMF5
SELinux state: Permissive
--Antutu tester info
Phone model: GT-I9190
Phone brands: Samsung
CPU model: ARMv7 processor rev 10(v7l)
CPU frequency: 13.53
CPU manufacturers: SAMSUNG SERRANO
Internal RAM: 1349(MB)
Internal ROM: 107(MB)
Android OS version: 4.2.2
Version: JDQ39.I9190XXUAMF5
Kernel Version: 3.4.0-849021 [email protected]))#1 SMP PREEMPT Thu Jun 13 16:52:08 KST 2013
Screen Resolution: 540x960
--Factory mode info (hold volume up + power button when phone turned off)
BB Chip: MT6575
MS Board: GT-I9190
Modem Ver: MAUI.11AMD.W11.50.SP.V37 2013/08/20 12:45
Build time: 2013 09 27 14:25:07 CST
UBoot ver.: 2010.06
Kernel ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Sep 27 14:21:49 CST 2013
Android ver: 2.3.6
SW ver: MDK_V2.1_K18_en_tp6306_v2.3
Custom Build Verno. : 1380262921
It's a clone from China/Korea/Japan (I don't know) and I would like to root and update the android version but I've tried a lot of different tutorials but no success in anyone.
I tried to put my phone on Download mode (Hold volume down + home button + power button) but it only show a screen with the android robot and a triangle with white borders and an exclamation inside. It is the recovery mode (Android recovery mode <e> with some options appears if I press home button)
Could somebody help me on this?
I tried:
* Odin -- Does not recognize my phone because it is not in download mode
* Mtk droid tools:
--->>> Connect to device <<<---
--- Nand Page/Spare = 2048/64
--- Start ZergRush ...
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
--- Through CWM it is possible to get root on this phone!
* PdaNet -- Don't do nothing, loose of time testing it!!
* SP Flash Tools -- When I choose the scatter file (generated by MTK Droid tools) the list of downloads does not fill the 'Location' and it does not let me download anything.
Nothing works. I really would like to root because I want to update android and uninstall a bunch of chinese/korean apps that shows semi naked women in the middle of screen from nothing. Depending on the situation it can cause an embarrassment for me.
Please help me!!!!!!
s4 I9500 replica
can some one help me get the rom for a mt6575 I9500 dual core 1Ghz, 512rami managed to flash a few roms, but i think those are not for my device, cause most of them are S3, or note, but it matches cause of the NAND flash file on them, can some one help me with this?, device dont turn on or charge, but ican make it work on pc to flash by holding down volume- key and then pluging cable to pc, when first red bar pass i but the battery and flash is complete(this is using SPFlash Tools.

Galaxy S5 Clone - Help to unbrick

Hi there.
I have a Galaxy S5 clone and not sure which exact model it is or which manufacturer it came from.
The phone is not working anymore, after I tried RAM repartition. No reaction at all. Display stays black/off.
When plugged into PC, MTK USB drivers are detected/installed.
Unfortunately I don't have a backup nor a stock ROM and so I am not able to recover the phone.
Here the scatter information:
Hardware : MT6572 (MT6589 is Fake!)
Model : SM-G900H
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140626-091826
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 27 16:12:13 CST 2014
Uboot build v : -----
LCD Driver IC : 1-sh1282g_dsi_vdo
When trying to flash an alternative ROM via SP Flash Tools, red process bar immediately shows 100% and then it's aborted showing "Error 4032 (Enable DRAM FAILED)"
Photos attached show phone when it previously worked. As you can see there, system information and Antutu Screens already showed "fake informations" about the phone.
Please help me!
*push*
I really need help.
BD
I've made a backup of this phone but there's no system.img in the backup folder just a system folder.So I'm unable to flash back the android.img.Any ideas?
GangstaNo1 said:
Hi there.
I have a Galaxy S5 clone and not sure which exact model it is or which manufacturer it came from.
The phone is not working anymore, after I tried RAM repartition. No reaction at all. Display stays black/off.
When plugged into PC, MTK USB drivers are detected/installed.
Unfortunately I don't have a backup nor a stock ROM and so I am not able to recover the phone.
Here the scatter information:
Hardware : MT6572 (MT6589 is Fake!)
Model : SM-G900H
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140626-091826
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 27 16:12:13 CST 2014
Uboot build v : -----
LCD Driver IC : 1-sh1282g_dsi_vdo
When trying to flash an alternative ROM via SP Flash Tools, red process bar immediately shows 100% and then it's aborted showing "Error 4032 (Enable DRAM FAILED)"
Photos attached show phone when it previously worked. As you can see there, system information and Antutu Screens already showed "fake informations" about the phone.
Please help me!
Click to expand...
Click to collapse
Hi
I have a backup of this ROM, if you are still interested I can upload somewhere, but there are some missing application in the backup (weather, S-Health ...)
Hektor1967 said:
Hi
I have a backup of this ROM, if you are still interested I can upload somewhere, but there are some missing application in the backup (weather, S-Health ...)
Click to expand...
Click to collapse
hi
my phone is brick
can you give me the link
thank you
problem
i have also problem with the same phone can you send me the rom?
[email protected]
I can provide my backup of the phone. But my is now bricked on the boot logo and wont to start. If somebody could help me to solve that will be great
hi,
this phone is a fake, proc, ram, etc.., everything is false
I realized an autopsy.
h**p://forum.frandroid.com/topic/200907-non-r%C3%A9solusamsung-s5-contrefa%C3%A7on/
sold for mt6592, ram 2Go, 16Go
really it's a mt6572 proc, ram 2Go, rom 4Go
Orefie
orefie said:
hi
my phone is brick
can you give me the link
thank you
Click to expand...
Click to collapse
Hi
It's just does not allow me to put the link here
Hektor1967 said:
Hi
It's just does not allow me to put the link here
Click to expand...
Click to collapse
It seems there is a lot of people who got in trouble with these phones. Let me pose some questions to all those who are in trouble:
For those who purchased them from EBay (and I assume also AliExpress) there should be good chances of getting a replacement or getting the money back - these frauds are well known and being quietly repressed. I mean, if we don't kick back, things will get even worse.
For all those who are interested, let me pose some basic questions:
Was the phone rooted when you got into trouble?
Did you have a custom recovery installed? CWD?
If yes, did you install ADB Insecure at boot?
What did you do that bricked the phone, and why were you doing it, for which purpose?
Does the phone still connect to the PC? If yes, which kind of drivers get loaded?
Can you still enter terminal mode on the PC and get answer when you issue the ADB devices command from the Android SDK platform? If yes, what happens when you send the ADB reboot bootloader and ADB reboot recovery commands?
Can you still get into recovery by pressing the vol down, start and center buttons?
If you connect the phone (typically - but there maybe variants) switched off and without battery, does it try to install/install the MT65xx preloader driver (a COM port emulator on USB)? Be aware that, if there is no data transfer, these drivers stay up only for a few seconds, even when the driver is correctly installed
You can't anymore connect with the MKTDroids SW, can you?
Most of these phones show two memory areas, a big internal storage, to which the user has no access, and a rather small phone memory. The internal storage in reality maps to a partition that is quite smaller and the values that are shown in the menu are fake - in my case, 7 times bigger than the real.
Everybody who has got a phone of this kind working, even unrooted, can do this simple test. This is what happened on mine:
1) Download a big app such as 3DMark
2) Go to Settings-Memory and take note of the size of the internal storage still available – for me it was 7.64GB
3) Uninstall 3DMark but, just before pressing the button, take note of the size – it is 39.25MB for 3DMark
4) Go to Settings-Memory again and take note of the size of the available internal storage – for me it was 7.91GB
5) Make the difference: 7.91-7.64=0.27GB=276MB. WELL, THIS WAS 7 TIMES THE REAL VALUE: 276/39,25=7.04
If you run parted on such a phone you get error message as the size of partitions is bigger that the ROM disk
GangstaNo1 said:
*push*
I really need help.
Click to expand...
Click to collapse
Are you still into trouble or you got the ROM and solved it?
If not, can you explain to me what you were attempting to do when the phone was bricked? What do you mean as RAM repartition?
---------- Post added at 10:54 AM ---------- Previous post was at 10:39 AM ----------
Madol1 said:
I can provide my backup of the phone. But my is now bricked on the boot logo and wont to start. If somebody could help me to solve that will be great
Click to expand...
Click to collapse
Are you still in trouble?
If yes, can you tell me how your phone got bricked, and what was the status of the phone, was it rooted with some Custom recovery installed, or what?
gt56 said:
Are you still into trouble or you got the ROM and solved it?
If not, can you explain to me what you were attempting to do when the phone was bricked? What do you mean as RAM repartition?
---------- Post added at 10:54 AM ---------- Previous post was at 10:39 AM ----------
Are you still in trouble?
If yes, can you tell me how your phone got bricked, and what was the status of the phone, was it rooted with some Custom recovery installed, or what?
Click to expand...
Click to collapse
I was not able to solve the boot problems and did not want to spend more time in saving a cheap phones life, so I just throwed it in the bin.
help
Hektor1967 said:
Hi
I have a backup of this ROM, if you are still interested I can upload somewhere, but there are some missing application in the backup (weather, S-Health ...)
Click to expand...
Click to collapse
i need the backup to this rom as well please [email protected] send my phone is dead.
gt56 said:
Are you still into trouble or you got the ROM and solved it?
If not, can you explain to me what you were attempting to do when the phone was bricked? What do you mean as RAM repartition?
---------- Post added at 10:54 AM ---------- Previous post was at 10:39 AM ----------
Are you still in trouble?
If yes, can you tell me how your phone got bricked, and what was the status of the phone, was it rooted with some Custom recovery installed, or what?
Click to expand...
Click to collapse
Yes. The phone is still bricked. Hang on MTK logo. The phone was flashed with a ROM to get the IMEI working, was no working. No Custom recovery installed.
orefie said:
hi,
this phone is a fake, proc, ram, etc.., everything is false
I realized an autopsy.
h**p://forum.frandroid.com/topic/200907-non-r%C3%A9solusamsung-s5-contrefa%C3%A7on/
sold for mt6592, ram 2Go, 16Go
really it's a mt6572 proc, ram 2Go, rom 4Go
Orefie
Click to expand...
Click to collapse
Where do you guys buy these things?
On another note, having a program that can inspect the insides of these phones would be very helpful. Where to buy that?
if any one still need this rom, you can go here good luck
SM-G900H(MT6572 (MT6589 is fake))
Does anyone ROM for phone model below?
Kernel 33.4.5 [email protected]#1 jul.16.2015 20120106
4.4.4 Jelly_Bean_NR1
Mali-400P
P5 model phone
SM-G900H(MT6572 (MT6589 is fake))
Thanks
Read Back
A question
Can destroy phone if just read (FileSystem UBIFS) with program FlashTool(ReadBack) ?
Thanks

[Q] Mediatek tablet has watermark after flashing CWM backup

Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/show....php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/show....php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
thedede said:
Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/show....php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/show....php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
Click to expand...
Click to collapse
i have this tablet. Please help me to root this. I need cwm. do you can help me? thanks the link istructions do not work
andrea! said:
i have this tablet. Please help me to root this. I need cwm. do you can help me? thanks the link istructions do not work
Click to expand...
Click to collapse
Your post is completely off topic. Please stop defecating in my thread.
I actually believe you are telling me you don't know how to search the forums. On the top left of this screen click on the search glass icon. Then, in the "Search all forums" box that appears type "framaroot", and hit enter on your keyboard. Click on the first link and read all the posts in order. When you are finished you will have read how to root the device. Now, click on the search glass icon again. This time type "MTK Droid Root & Tools", and hit enter on your keyboard. Click on the first link and read all the posts in order. When you are finished you will have read how to install CWM on the device.
that is the water marrk from the program jlinktools same hapens with wiselinktools i have the same problem and i have try many rooms but all the 7 roms hapen the water mark i have just not see that mark on 1 messup rom from lenovo s...
i dont find any option to disable that mark on that tools when i flash

Huawei G610-U20- Stuck In Bootloop After Trying To Install Recovery

[Q] Please help me out. Huawei G610-U20 Bootloop Issue
device : Huawei G610-U20
Model : HUAWEI G610-U20
Build number : G610-U20 V100R001C00B124
Build date UTC : 20140219-030653
Android v : 4.2.1
ls: /system/recovery-from-boot.p: No such file or directory
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Feb 19
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V5.P10, 2014/01/03 22:50
My phone is currently in bootloop after tried to install recovery. I used Mtk droid tools to make a backup of my phone. After that I clicked on recovery and boot and chose use boot from fone and hit recovery and boot it. Then It didnt boot to recovery but got stuck in boot loop.
I have tried using sp flash tool but it gives me BROM ERROR:S_COM_PORT_OPEN Fail(1013) because the phone keeps restarting and vibrating.
I cant seem to get into recovery or download mode at all. The only thing i seem to be able to do is go into fastboot, which doesnt do anything..
I have searched all over the internet but cant find a solution that works for me.
Here is a log file from MTK DROID:
https://www.wetransfer.com/download...66e0ad5dcdce2696f8e5c83420150912092731/d30f52
Help MUCH APPRECIATED!!
need help
I beg you! anyone?:good:
Is it possible to bypass this bootloop?
Let there please be someone with a solution
There must be someone who could help me, right?
More details added
please
S'il vous plait!
I havr same problem
No one wants to help us
sciwalker007 said:
device : Huawei G610-U20
Model : HUAWEI G610-U20
Build number : G610-U20 V100R001C00B124
Build date UTC : 20140219-030653
Android v : 4.2.1
ls: /system/recovery-from-boot.p: No such file or directory
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Feb 19
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V5.P10, 2014/01/03 22:50
My phone is currently in bootloop after tried to install recovery. I used Mtk droid tools to make a backup of my phone. After that I clicked on recovery and boot and chose use boot from fone and hit recovery and boot it. Then It didnt boot to recovery but got stuck in boot loop.
I have tried using sp flash tool but it gives me BROM ERROR:S_COM_PORT_OPEN Fail(1013) because the phone keeps restarting and vibrating.
I cant seem to get into recovery or download mode at all. The only thing i seem to be able to do is go into fastboot, which doesnt do anything..
I have searched all over the internet but cant find a solution that works for me.
Here is a log file from MTK DROID:
https://www.wetransfer.com/download...66e0ad5dcdce2696f8e5c83420150912092731/d30f52
Help MUCH APPRECIATED!!
Click to expand...
Click to collapse
Hi....I'm having the same issue. Did you manage to fix ur phone after all?
Nope not yet. still waiting on a solution..
I have the same issue please help

soft-bricked my mtk6582 phone and porting problems

Hello,
Its been more than 10 days i am trying to fix my phone . it is a china phone with mtk6582
I had many popups that was difficult for me to work on the phone (make a call, answer a call, etc)
I managed to root it and install antivirus prog.
the situation was better but still not ok.
Then i installed one prog that could erase system apps and i made a try with game center.
That was the start.
After that the phone boots but it can't load properly. The screen flashes and i can see between the flashes that it tries to load something (the launcher maybe??) .
When i try to unlock the screen i have a steady screen but when unlocked flashes again..
the notification bar works even though the screen flashes.
The unbrick procedure started with trying to install all the ported roms i could find with the porting guides of xda, mtkroms mtkcrom and others.
Still no success.
Now i am trying to learn adb and fastboot
I have cwm 5.5.0.4
I took rom backup with MTKdroidTools after the problem.
I assume that the rom backup is not ok since it is taken from a problematic phone
I think that my problem could be solved easily if i new what to fix in the system folders (file/s missing or correct some info into some file).
I could also do the porting but i had no luck and tried at least 20 times.
this is the listing ebay phone
Please any thought is welcome.
This is from mtkdroidtools :
Hardware : MT6582
Model : V12
Build number : S5_JB5(82)_3G_EMMC_64_8_XLD_V12 20141119-100020
Build date UTC : 20141118-065820
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V28, 2014/04/04 15:53
Kernel v : 3.4.5 ([email protected]greate-desktop) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP Wed Nov 19 10:18:41 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 0-nt35517_qhd_dsi_vdo

Categories

Resources