Related
Hello Guys,
I am new to the Android world. I got a s4 mini clone android phone.(Model:GT i9190) few days back. I
rooted with framaroot app successfully. Thats all i probably know about android then so i did not
make any backup,or even know the ram,rom or processor of my phone. I was able to also install the
Rosemary font successfully on my phone. The problem occured when i was trying to change the font to a
bold type of the same font and my phone got stuck in boot loop. It charges, boot to the Samsung logo,
I can enter to the recovery mode, I have wipe cache partition, wipe factory data, reboot and its
still stuck at the samsung logo.
I have also dowwnloaded the Sp flash tool , tried to download a new rom on my phone but all failed,
though i think i have the wrong rom. this are the errors i get while trying to download
BROM ERROR: S_DA_EMMC_FLASH_NOT_FOUND (3144) ,
BROM ERROR:S_FT_ENABLE_DRAM_FAIL (4032) and
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL (5054) .
I got this errors using different key combinations. As my
PC no longer detects my fone, i use the Meta mode to try to flash or download a new rom. You can the
pictures i have attached. I need help from the members of this great forum. i have read similar
problems and tried them but all to no avail. I must mention that i have tried the methods on win7 and
8 ,on my window 8 i have disable what will not make usb install. cant rember the name at the moment.
I have also used usbdeview to uninstall drivers and install back. Its been five days now. I dont know
if anyone having similar rom can help out. I have tried about 2 roms and both did not work. I have
tried Yuweng and Havunen methods. the flash is not working so am guessing i have a wrong rom. Please
any one that has it can help me with it. Its been five gruesome days for me.
Before it got stuck in bootloop, when the phone is connected to my Pc ,Samsung Kies shows (Serrano3g).
Welda
Don't know about clones or anything but you could try downloading the rom from sammobile.com
And then flash with Odin, go into bootloader mode first
More Information on the Phone
From what i have learn here, i don't think original samsung firmware works for clones. I am able to get the factory mode on the phone though its in chinese so i dont understand it but am
able to get some of the phone's details like:
BB Chip : MT6572
MS Board : serrano3g
IMEI : xxxxxxxxx
Modem Version : MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/09/24 12:14
BAR CODE: xxxxxxxx
BUILD TIME : 2014 04 10 CST
KERNEL VER. : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP
PREEMPT Thur Apr 10 22:00:27 CST 2014
ANDROID VER.: 4.2.2
SW VER.: ALPS.JB3.MP.V1
CUSTOM BUILD VERNX v.s 140410
I dont know if anyone is here with similar experience that can help me with the Chinese. I will post the screen shot.
weldamea said:
From what i have learn here, i don't think original samsung firmware works for clones. I am able to get the factory mode on the phone though its in chinese so i dont understand it but am
able to get some of the phone's details like:
BB Chip : MT6572
MS Board : serrano3g
IMEI : xxxxxxxxx
Modem Version : MOLY.WR8.W1315.MD.WG.MP.V1.P1, 2013/09/24 12:14
BAR CODE: xxxxxxxx
BUILD TIME : 2014 04 10 CST
KERNEL VER. : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP
PREEMPT Thur Apr 10 22:00:27 CST 2014
ANDROID VER.: 4.2.2
SW VER.: ALPS.JB3.MP.V1
CUSTOM BUILD VERNX v.s 140410
I dont know if anyone is here with similar experience that can help me with the Chinese. I will post the screen shot.
Click to expand...
Click to collapse
Hi man
I need your rom
Not all of it
I need this parts
Preloader, uboot, boot, recovery, logo
Please man i need this partitions
You can just give me them as ROM_0 file
Please man my phone is dead from about one month
And you are the only one who can give me some help
What is your partition type?
I got this my fone running and then bricked it again. So its not coming at all but i can help you with the rom. What is the partition type of your phone so i can be sure am sending you the right rom?
weldamea said:
I got this my fone running and then bricked it again. So its not coming at all but i can help you with the rom. What is the partition type of your phone so i can be sure am sending you the right rom?
Click to expand...
Click to collapse
My memory is a 512mb nand chip and the file system is ubifs
And i need only the parts that i told you about
And what about you?
What is your problem right now?
May be i can give you a hand in this
P.S: i need your phone's rom
Because the roms on the net do not match my lcd drive
hellooooooooo, where are you maaan??????
need help also
hello my friends . i'am happy that finally i found someone who has the same phone as me . please could any of you two give me the link to the rom or do me a backup of his
i really messed up my phone and now for about 3 months my phone is dead
please help
Hi there.
I have a Galaxy S5 clone and not sure which exact model it is or which manufacturer it came from.
The phone is not working anymore, after I tried RAM repartition. No reaction at all. Display stays black/off.
When plugged into PC, MTK USB drivers are detected/installed.
Unfortunately I don't have a backup nor a stock ROM and so I am not able to recover the phone.
Here the scatter information:
Hardware : MT6572 (MT6589 is Fake!)
Model : SM-G900H
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140626-091826
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 27 16:12:13 CST 2014
Uboot build v : -----
LCD Driver IC : 1-sh1282g_dsi_vdo
When trying to flash an alternative ROM via SP Flash Tools, red process bar immediately shows 100% and then it's aborted showing "Error 4032 (Enable DRAM FAILED)"
Photos attached show phone when it previously worked. As you can see there, system information and Antutu Screens already showed "fake informations" about the phone.
Please help me!
*push*
I really need help.
BD
I've made a backup of this phone but there's no system.img in the backup folder just a system folder.So I'm unable to flash back the android.img.Any ideas?
GangstaNo1 said:
Hi there.
I have a Galaxy S5 clone and not sure which exact model it is or which manufacturer it came from.
The phone is not working anymore, after I tried RAM repartition. No reaction at all. Display stays black/off.
When plugged into PC, MTK USB drivers are detected/installed.
Unfortunately I don't have a backup nor a stock ROM and so I am not able to recover the phone.
Here the scatter information:
Hardware : MT6572 (MT6589 is Fake!)
Model : SM-G900H
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140626-091826
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 27 16:12:13 CST 2014
Uboot build v : -----
LCD Driver IC : 1-sh1282g_dsi_vdo
When trying to flash an alternative ROM via SP Flash Tools, red process bar immediately shows 100% and then it's aborted showing "Error 4032 (Enable DRAM FAILED)"
Photos attached show phone when it previously worked. As you can see there, system information and Antutu Screens already showed "fake informations" about the phone.
Please help me!
Click to expand...
Click to collapse
Hi
I have a backup of this ROM, if you are still interested I can upload somewhere, but there are some missing application in the backup (weather, S-Health ...)
Hektor1967 said:
Hi
I have a backup of this ROM, if you are still interested I can upload somewhere, but there are some missing application in the backup (weather, S-Health ...)
Click to expand...
Click to collapse
hi
my phone is brick
can you give me the link
thank you
problem
i have also problem with the same phone can you send me the rom?
[email protected]
I can provide my backup of the phone. But my is now bricked on the boot logo and wont to start. If somebody could help me to solve that will be great
hi,
this phone is a fake, proc, ram, etc.., everything is false
I realized an autopsy.
h**p://forum.frandroid.com/topic/200907-non-r%C3%A9solusamsung-s5-contrefa%C3%A7on/
sold for mt6592, ram 2Go, 16Go
really it's a mt6572 proc, ram 2Go, rom 4Go
Orefie
orefie said:
hi
my phone is brick
can you give me the link
thank you
Click to expand...
Click to collapse
Hi
It's just does not allow me to put the link here
Hektor1967 said:
Hi
It's just does not allow me to put the link here
Click to expand...
Click to collapse
It seems there is a lot of people who got in trouble with these phones. Let me pose some questions to all those who are in trouble:
For those who purchased them from EBay (and I assume also AliExpress) there should be good chances of getting a replacement or getting the money back - these frauds are well known and being quietly repressed. I mean, if we don't kick back, things will get even worse.
For all those who are interested, let me pose some basic questions:
Was the phone rooted when you got into trouble?
Did you have a custom recovery installed? CWD?
If yes, did you install ADB Insecure at boot?
What did you do that bricked the phone, and why were you doing it, for which purpose?
Does the phone still connect to the PC? If yes, which kind of drivers get loaded?
Can you still enter terminal mode on the PC and get answer when you issue the ADB devices command from the Android SDK platform? If yes, what happens when you send the ADB reboot bootloader and ADB reboot recovery commands?
Can you still get into recovery by pressing the vol down, start and center buttons?
If you connect the phone (typically - but there maybe variants) switched off and without battery, does it try to install/install the MT65xx preloader driver (a COM port emulator on USB)? Be aware that, if there is no data transfer, these drivers stay up only for a few seconds, even when the driver is correctly installed
You can't anymore connect with the MKTDroids SW, can you?
Most of these phones show two memory areas, a big internal storage, to which the user has no access, and a rather small phone memory. The internal storage in reality maps to a partition that is quite smaller and the values that are shown in the menu are fake - in my case, 7 times bigger than the real.
Everybody who has got a phone of this kind working, even unrooted, can do this simple test. This is what happened on mine:
1) Download a big app such as 3DMark
2) Go to Settings-Memory and take note of the size of the internal storage still available – for me it was 7.64GB
3) Uninstall 3DMark but, just before pressing the button, take note of the size – it is 39.25MB for 3DMark
4) Go to Settings-Memory again and take note of the size of the available internal storage – for me it was 7.91GB
5) Make the difference: 7.91-7.64=0.27GB=276MB. WELL, THIS WAS 7 TIMES THE REAL VALUE: 276/39,25=7.04
If you run parted on such a phone you get error message as the size of partitions is bigger that the ROM disk
GangstaNo1 said:
*push*
I really need help.
Click to expand...
Click to collapse
Are you still into trouble or you got the ROM and solved it?
If not, can you explain to me what you were attempting to do when the phone was bricked? What do you mean as RAM repartition?
---------- Post added at 10:54 AM ---------- Previous post was at 10:39 AM ----------
Madol1 said:
I can provide my backup of the phone. But my is now bricked on the boot logo and wont to start. If somebody could help me to solve that will be great
Click to expand...
Click to collapse
Are you still in trouble?
If yes, can you tell me how your phone got bricked, and what was the status of the phone, was it rooted with some Custom recovery installed, or what?
gt56 said:
Are you still into trouble or you got the ROM and solved it?
If not, can you explain to me what you were attempting to do when the phone was bricked? What do you mean as RAM repartition?
---------- Post added at 10:54 AM ---------- Previous post was at 10:39 AM ----------
Are you still in trouble?
If yes, can you tell me how your phone got bricked, and what was the status of the phone, was it rooted with some Custom recovery installed, or what?
Click to expand...
Click to collapse
I was not able to solve the boot problems and did not want to spend more time in saving a cheap phones life, so I just throwed it in the bin.
help
Hektor1967 said:
Hi
I have a backup of this ROM, if you are still interested I can upload somewhere, but there are some missing application in the backup (weather, S-Health ...)
Click to expand...
Click to collapse
i need the backup to this rom as well please [email protected] send my phone is dead.
gt56 said:
Are you still into trouble or you got the ROM and solved it?
If not, can you explain to me what you were attempting to do when the phone was bricked? What do you mean as RAM repartition?
---------- Post added at 10:54 AM ---------- Previous post was at 10:39 AM ----------
Are you still in trouble?
If yes, can you tell me how your phone got bricked, and what was the status of the phone, was it rooted with some Custom recovery installed, or what?
Click to expand...
Click to collapse
Yes. The phone is still bricked. Hang on MTK logo. The phone was flashed with a ROM to get the IMEI working, was no working. No Custom recovery installed.
orefie said:
hi,
this phone is a fake, proc, ram, etc.., everything is false
I realized an autopsy.
h**p://forum.frandroid.com/topic/200907-non-r%C3%A9solusamsung-s5-contrefa%C3%A7on/
sold for mt6592, ram 2Go, 16Go
really it's a mt6572 proc, ram 2Go, rom 4Go
Orefie
Click to expand...
Click to collapse
Where do you guys buy these things?
On another note, having a program that can inspect the insides of these phones would be very helpful. Where to buy that?
if any one still need this rom, you can go here good luck
SM-G900H(MT6572 (MT6589 is fake))
Does anyone ROM for phone model below?
Kernel 33.4.5 [email protected]#1 jul.16.2015 20120106
4.4.4 Jelly_Bean_NR1
Mali-400P
P5 model phone
SM-G900H(MT6572 (MT6589 is fake))
Thanks
Read Back
A question
Can destroy phone if just read (FileSystem UBIFS) with program FlashTool(ReadBack) ?
Thanks
Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/show....php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/show....php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
thedede said:
Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/show....php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/show....php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
Click to expand...
Click to collapse
i have this tablet. Please help me to root this. I need cwm. do you can help me? thanks the link istructions do not work
andrea! said:
i have this tablet. Please help me to root this. I need cwm. do you can help me? thanks the link istructions do not work
Click to expand...
Click to collapse
Your post is completely off topic. Please stop defecating in my thread.
I actually believe you are telling me you don't know how to search the forums. On the top left of this screen click on the search glass icon. Then, in the "Search all forums" box that appears type "framaroot", and hit enter on your keyboard. Click on the first link and read all the posts in order. When you are finished you will have read how to root the device. Now, click on the search glass icon again. This time type "MTK Droid Root & Tools", and hit enter on your keyboard. Click on the first link and read all the posts in order. When you are finished you will have read how to install CWM on the device.
that is the water marrk from the program jlinktools same hapens with wiselinktools i have the same problem and i have try many rooms but all the 7 roms hapen the water mark i have just not see that mark on 1 messup rom from lenovo s...
i dont find any option to disable that mark on that tools when i flash
[Q] Please help me out. Huawei G610-U20 Bootloop Issue
device : Huawei G610-U20
Model : HUAWEI G610-U20
Build number : G610-U20 V100R001C00B124
Build date UTC : 20140219-030653
Android v : 4.2.1
ls: /system/recovery-from-boot.p: No such file or directory
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Feb 19
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V5.P10, 2014/01/03 22:50
My phone is currently in bootloop after tried to install recovery. I used Mtk droid tools to make a backup of my phone. After that I clicked on recovery and boot and chose use boot from fone and hit recovery and boot it. Then It didnt boot to recovery but got stuck in boot loop.
I have tried using sp flash tool but it gives me BROM ERROR:S_COM_PORT_OPEN Fail(1013) because the phone keeps restarting and vibrating.
I cant seem to get into recovery or download mode at all. The only thing i seem to be able to do is go into fastboot, which doesnt do anything..
I have searched all over the internet but cant find a solution that works for me.
Here is a log file from MTK DROID:
https://www.wetransfer.com/download...66e0ad5dcdce2696f8e5c83420150912092731/d30f52
Help MUCH APPRECIATED!!
need help
I beg you! anyone?:good:
Is it possible to bypass this bootloop?
Let there please be someone with a solution
There must be someone who could help me, right?
More details added
please
S'il vous plait!
I havr same problem
No one wants to help us
sciwalker007 said:
device : Huawei G610-U20
Model : HUAWEI G610-U20
Build number : G610-U20 V100R001C00B124
Build date UTC : 20140219-030653
Android v : 4.2.1
ls: /system/recovery-from-boot.p: No such file or directory
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Feb 19
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V5.P10, 2014/01/03 22:50
My phone is currently in bootloop after tried to install recovery. I used Mtk droid tools to make a backup of my phone. After that I clicked on recovery and boot and chose use boot from fone and hit recovery and boot it. Then It didnt boot to recovery but got stuck in boot loop.
I have tried using sp flash tool but it gives me BROM ERROR:S_COM_PORT_OPEN Fail(1013) because the phone keeps restarting and vibrating.
I cant seem to get into recovery or download mode at all. The only thing i seem to be able to do is go into fastboot, which doesnt do anything..
I have searched all over the internet but cant find a solution that works for me.
Here is a log file from MTK DROID:
https://www.wetransfer.com/download...66e0ad5dcdce2696f8e5c83420150912092731/d30f52
Help MUCH APPRECIATED!!
Click to expand...
Click to collapse
Hi....I'm having the same issue. Did you manage to fix ur phone after all?
Nope not yet. still waiting on a solution..
I have the same issue please help
Hi,
I got problem with new SOYES XS phone. The WiFi shows NVRAM WARNING: Err = 0x10 which as i found out is common problem for MTK devices and is fixable, but phone must be rooted).
I was trying to root it but MTK Droid Tool has problems with this phone...
Hardware : MT6737
Model : SOYES XS
Build number : XS-EN-V3.3.01_20190326
Build date UTC : 20190326-072339
Android v : 6.0
Baseband v: MOLY.LR9.W1444.MD.LWTG.MP.V88.P41, 2019/03/26 15:13
Kernel v : 3.18.19+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Tue Mar 26 15:19:44 CST 2019
n system already available: Android Debug Bridge version 1.0.31
--->>> Connect to device <<<---
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
And even block map can't be read
RootGenius app does not work either.
Is it any possibility to fix this issue, with it WiFi and networking does not work at all ;(
Thank you in advance
Kris
Nobody uses MTK Droid Tool nowadays. The newer MTK devices firmware have bootlock an other stuff. Only the cheaper "disposable" Chinese phones have no bootlock but not 100%, some newer models of these phones firmwares have bootlock even if using the older MTK SoC.
You will first have to try checking your developer option (>About Phone >Build number tap x5 = Developer Option) to see whether you have the "OEM unlock" option and tick that.
Then ADB fast boot "unlock" before you can do any rooting attempt. The best is to install TWRP first to install SuperSU after the boot unlock. The fastest way to Root is to use the Chinese "KingRoot or Kingoroot" (that is 2 different apps).(info : Kingroot site might give you a "dangerous site" warning. No spyware or malware was ever detected by "SpyHunter" after visiting site.But it is also not 100% guaranteed. The result can be different using PC and Android version. Sometimes PC method is not successful the Android is successful and vice versa. There are other shady Chinese rooting apps that I advise you to avoid. Only those 2 mentioned are recommended. the safest is still SuperSU. (If you are afraid that the Chinese would spy on you, you better avoid any Chinese brand devices altogether) My experience in using Oppo, Lenovo, and no names Chinese phones is that the no name Chinese phones are much safer in terms of spying risk. Lenovo/Oppo phones has a few unknown systems app and I caught them using the WiFi and reading my SMS/MMS/Contacts using ADGuard .Even the top rated "Apex Launcher" is a bigger culprit establishing communication with unknown server every 5 minutes.
I have never used MTK Droid Tool to root any of my 11 devices I own. Only through recovery method(SuperSU) or Kingroot method. Once I tried using MTK Droid tool and it failed to root. Thats is my advise.
I also purchased this phone as a spare. It also has the nvram error, but the wifi works regardless. I tried to root with all combinations of kingroot and kingoroot but did not succeed. Did it work out for you? I found the OS on mine very barebones, full AOSP and one cringy launcher I replaced with Nova launcher from Play.
zdanee said:
I also purchased this phone as a spare. It also has the nvram error, but the wifi works regardless. I tried to root with all combinations of kingroot and kingoroot but did not succeed. Did it work out for you? I found the OS on mine very barebones, full AOSP and one cringy launcher I replaced with Nova launcher from Play.
Click to expand...
Click to collapse
lol. the stock launcher is funny
got the error, too, but zero problems with WIFI
How to Install Stock ROM on Soyes Xs [Firmware Flash File/Unbrick]
How to Install Stock ROM on Soyes Xs [Firmware Flash File/Unbrick]
https://www.getdroidtips.com/stock-rom-soyes-xs/
qczek said:
Hi,
I got problem with new SOYES XS phone. The WiFi shows NVRAM WARNING: Err = 0x10 which as i found out is common problem for MTK devices and is fixable, but phone must be rooted).
I was trying to root it but MTK Droid Tool has problems with this phone...
Hardware : MT6737
Model : SOYES XS
Build number : XS-EN-V3.3.01_20190326
Build date UTC : 20190326-072339
Android v : 6.0
Baseband v: MOLY.LR9.W1444.MD.LWTG.MP.V88.P41, 2019/03/26 15:13
Kernel v : 3.18.19+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Tue Mar 26 15:19:44 CST 2019
n system already available: Android Debug Bridge version 1.0.31
--->>> Connect to device <<<---
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
And even block map can't be read
RootGenius app does not work either.
Is it any possibility to fix this issue, with it WiFi and networking does not work at all ;(
Thank you in advance
Kris
Click to expand...
Click to collapse
Hi!
I have the same device with the buttons disabled. Do you know how I can enable the buttons? I would like to install a clean AOSP version on it. It would be great if anyone here can provide any assistance.
dexter1410 said:
Hi!
I have the same device with the buttons disabled. Do you know how I can enable the buttons? I would like to install a clean AOSP version on it. It would be great if anyone here can provide any assistance.
Click to expand...
Click to collapse
I found that there are many factory defects w the xs. My wifi worked, but poorly, I had to manually solder the antt wire to the antt sticker. Also the camera had a poor connection. You will have to teardown and investigate.