Hi,
I got problem with new SOYES XS phone. The WiFi shows NVRAM WARNING: Err = 0x10 which as i found out is common problem for MTK devices and is fixable, but phone must be rooted).
I was trying to root it but MTK Droid Tool has problems with this phone...
Hardware : MT6737
Model : SOYES XS
Build number : XS-EN-V3.3.01_20190326
Build date UTC : 20190326-072339
Android v : 6.0
Baseband v: MOLY.LR9.W1444.MD.LWTG.MP.V88.P41, 2019/03/26 15:13
Kernel v : 3.18.19+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Tue Mar 26 15:19:44 CST 2019
n system already available: Android Debug Bridge version 1.0.31
--->>> Connect to device <<<---
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
And even block map can't be read
RootGenius app does not work either.
Is it any possibility to fix this issue, with it WiFi and networking does not work at all ;(
Thank you in advance
Kris
Nobody uses MTK Droid Tool nowadays. The newer MTK devices firmware have bootlock an other stuff. Only the cheaper "disposable" Chinese phones have no bootlock but not 100%, some newer models of these phones firmwares have bootlock even if using the older MTK SoC.
You will first have to try checking your developer option (>About Phone >Build number tap x5 = Developer Option) to see whether you have the "OEM unlock" option and tick that.
Then ADB fast boot "unlock" before you can do any rooting attempt. The best is to install TWRP first to install SuperSU after the boot unlock. The fastest way to Root is to use the Chinese "KingRoot or Kingoroot" (that is 2 different apps).(info : Kingroot site might give you a "dangerous site" warning. No spyware or malware was ever detected by "SpyHunter" after visiting site.But it is also not 100% guaranteed. The result can be different using PC and Android version. Sometimes PC method is not successful the Android is successful and vice versa. There are other shady Chinese rooting apps that I advise you to avoid. Only those 2 mentioned are recommended. the safest is still SuperSU. (If you are afraid that the Chinese would spy on you, you better avoid any Chinese brand devices altogether) My experience in using Oppo, Lenovo, and no names Chinese phones is that the no name Chinese phones are much safer in terms of spying risk. Lenovo/Oppo phones has a few unknown systems app and I caught them using the WiFi and reading my SMS/MMS/Contacts using ADGuard .Even the top rated "Apex Launcher" is a bigger culprit establishing communication with unknown server every 5 minutes.
I have never used MTK Droid Tool to root any of my 11 devices I own. Only through recovery method(SuperSU) or Kingroot method. Once I tried using MTK Droid tool and it failed to root. Thats is my advise.
I also purchased this phone as a spare. It also has the nvram error, but the wifi works regardless. I tried to root with all combinations of kingroot and kingoroot but did not succeed. Did it work out for you? I found the OS on mine very barebones, full AOSP and one cringy launcher I replaced with Nova launcher from Play.
zdanee said:
I also purchased this phone as a spare. It also has the nvram error, but the wifi works regardless. I tried to root with all combinations of kingroot and kingoroot but did not succeed. Did it work out for you? I found the OS on mine very barebones, full AOSP and one cringy launcher I replaced with Nova launcher from Play.
Click to expand...
Click to collapse
lol. the stock launcher is funny
got the error, too, but zero problems with WIFI
How to Install Stock ROM on Soyes Xs [Firmware Flash File/Unbrick]
How to Install Stock ROM on Soyes Xs [Firmware Flash File/Unbrick]
https://www.getdroidtips.com/stock-rom-soyes-xs/
qczek said:
Hi,
I got problem with new SOYES XS phone. The WiFi shows NVRAM WARNING: Err = 0x10 which as i found out is common problem for MTK devices and is fixable, but phone must be rooted).
I was trying to root it but MTK Droid Tool has problems with this phone...
Hardware : MT6737
Model : SOYES XS
Build number : XS-EN-V3.3.01_20190326
Build date UTC : 20190326-072339
Android v : 6.0
Baseband v: MOLY.LR9.W1444.MD.LWTG.MP.V88.P41, 2019/03/26 15:13
Kernel v : 3.18.19+ ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Tue Mar 26 15:19:44 CST 2019
n system already available: Android Debug Bridge version 1.0.31
--->>> Connect to device <<<---
--- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
And even block map can't be read
RootGenius app does not work either.
Is it any possibility to fix this issue, with it WiFi and networking does not work at all ;(
Thank you in advance
Kris
Click to expand...
Click to collapse
Hi!
I have the same device with the buttons disabled. Do you know how I can enable the buttons? I would like to install a clean AOSP version on it. It would be great if anyone here can provide any assistance.
dexter1410 said:
Hi!
I have the same device with the buttons disabled. Do you know how I can enable the buttons? I would like to install a clean AOSP version on it. It would be great if anyone here can provide any assistance.
Click to expand...
Click to collapse
I found that there are many factory defects w the xs. My wifi worked, but poorly, I had to manually solder the antt wire to the antt sticker. Also the camera had a poor connection. You will have to teardown and investigate.
Related
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
No one wants to assist on this?
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
magemasher89 said:
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
Click to expand...
Click to collapse
needrom .com/ mobile/star-s7188/
here you go
(delete the spaces)
http://needrom.com/mobile/star-s7188/ edited link for everyone so no need to remove spaces.
Start S7180 easy root
magemasher89 said:
Just got a Chinese Clone Note II
Running Jelly Bean 4.1.1
back of phone under battery shows Model S7188
Phone about Specs:
Model e1901_v77_jbla668_fwvga
4.1.1
basband
MAUI.11amd.w12.22.sp.v15.p2,
2012/12/20 14:10
Kernel 3.4.0
[email protected]
#1 SMP PREEMPT Mon April 15 11:49:48
CST2013
Build number
e1901_v77_jbla668_fwvga_20130415
When I attempt to install on win 7 or xp it tries to install as ADP driver or Android google driver
Just looking for a way to root it.
Thanks
Click to expand...
Click to collapse
I can offer one more way to root the above device. I have the exact same device, but mine show S7180 on the back (Star S7180, I bought it under the name iPro S7180), but everything else is the same including the build e1901_v77_jbla668_fwvga_20130415.
To root it:
- Search google for Kingo Root or go to kingoapp. com - download Kingo Root app and install it (works under WinXP and Win7, don't know about Win8, but it should)
- Enable USB debugging in the Developer options on the device
- Plug in the Start S7180/S7188 phone with a standard micro usb cable, while the device is ON with the battery in, select nothing in the USB pop up menu, just leave it
- Run KingoRoot wait for it to recognize the device and click ROOT
- The app will install USB drivers for the device and root it - easy as this, it takes about 2 minutes
- If Kingo Root does not find USB drivers for the device, install them manually - search for "MTK6577 usb drivers" in Google, download the driver, install them on top without removing anything and repeat the procedure.
- Kingo has the option to remove the ROOT as well, which is nice if you need the warranty :angel:
This method worked for me without any issues and it took about 5 minutes. Have fun with a newly rooted NoteII clone. Now you can install custom recovery (for exmp. CWM recovery) and install custom ROMS, that is if you find a decent one - just search XDA. I still keep the rooted stock ROM, it's enough for now, until a comatible Cyanogen KitKat 4.4 comes out.
One more thing - I can offer one forum with a lot of useful stuff for our device - search google for star s7180 forum china ru
It's in russian but Google translate should be enough - there is a lot of information and fixes (remove second network icon, when there is not second sim card; get the GPS working and lock in a position in under a minute; increase the speaker volume; increase the internal space for installing apps by reformatting it, etc)
Cheers.
How to ROOT this phone ?
Model Number
" e1901_v77_jbla668_fwvga "
Android Version
" 4.1.1 "
Kernel Version
3.4.0
Build Number
" e1901_v77_jbla668_fwvga_20130116
" s7100 "
i search the Model number and it is Chinese Clone Note 2
i try " KingoRoot " but it does not work pls HELP me !!!
Gidday
Zapryanov said:
I can offer one more way to root the above device. I have the exact same device, but mine show S7180 on the back (Star S7180, I bought it under the name iPro S7180), but everything else is the same including the build e1901_v77_jbla668_fwvga_20130415.
To root it:
- Search google for Kingo Root or go to kingoapp. com - download Kingo Root app and install it (works under WinXP and Win7, don't know about Win8, but it should)
- Enable USB debugging in the Developer options on the device
- Plug in the Start S7180/S7188 phone with a standard micro usb cable, while the device is ON with the battery in, select nothing in the USB pop up menu, just leave it
- Run KingoRoot wait for it to recognize the device and click ROOT
- The app will install USB drivers for the device and root it - easy as this, it takes about 2 minutes
- If Kingo Root does not find USB drivers for the device, install them manually - search for "MTK6577 usb drivers" in Google, download the driver, install them on top without removing anything and repeat the procedure.
- Kingo has the option to remove the ROOT as well, which is nice if you need the warranty :angel:
This method worked for me without any issues and it took about 5 minutes. Have fun with a newly rooted NoteII clone. Now you can install custom recovery (for exmp. CWM recovery) and install custom ROMS, that is if you find a decent one - just search XDA. I still keep the rooted stock ROM, it's enough for now, until a comatible Cyanogen KitKat 4.4 comes out.
One more thing - I can offer one forum with a lot of useful stuff for our device - search google for star s7180 forum china ru
It's in russian but Google translate should be enough - there is a lot of information and fixes (remove second network icon, when there is not second sim card; get the GPS working and lock in a position in under a minute; increase the speaker volume; increase the internal space for installing apps by reformatting it, etc)
Cheers.
Click to expand...
Click to collapse
Hi, I have the
Model Number
" e1901_v77_jbla668_fwvga "
Android Version
" 4.1.1 "
Kernel Version
3.4.0
Build Number
" e1901_v77_jbla668_fwvga_20130116
" s7100 "
and have rooted it with kingo..
I can not find a cwm for this model or a custom rom that is higher than the stock. Do you have a link for both?
I really hope you can help
Hi all,
Let me first thank you for the wonderful website that you've created here, it already really helped me out.
Now, I want to root my fake Galaxy S4. I know the pain of people who ask questions without trying to look around for a solution themself. Yet, after a few full days, starting without any knowledge of smartphones, working my way trough all the terminology and trying to root my device... the only thing I know left to do is asking for your help. I sincerely hope this is 1) the right place 2) I'm allowed to ask this here and 3) there is not already a simliar topic... If I still failed then feel free to redirect me, move me, etc.
I bought the following device:
Hardware : MT6575 (SAMSUNG is aFake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130606-103654
Android v : 4.2.2
Baseband v: MAUI.11AMD.W11.50.SP.V37, 2013/05/06 11:21
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Thu Jun 6 18:33:27 CST 2013
This is what I did:
Drivers:
- I've downloaded and succesfully installed pda drivers.
- I've manually installed MT6575_USB_VCOM_drivers by connecting my phone while holding the volume button. These drivers appear, but disappear again in the Device Manager.
Tried Roots:
- This one of course. But the 'Restore button' does not pop up.
- SRSRoot - does not work
- New graphical method for MTK6589,MTK6577,MTK6575 - does not work
- Manual way directed via MTK Droid Root en Tools:
I failed here at step 7. Mtk drooid Root does not make the CWM automaticly.
Furthermore:
- Tried removing all user data in Recovery Mode, but when I press the power button to select the option it simply does not react.
- I can not enter 'download mode' as far as I know.
- I know there are more methods in Gizbeat 101, but I can't acces them right now... as I'm not a full member there and somehow got instabanned.
- I have the idea they could help me at the Russian fora.. I found this thread with help of google translate... but I don't speak Russian and can't figure out what to do.
Can anyone help me out? This phone has hardly any internal storage. I can't remove most of the applications and a lot of appliacations first install on it's internal memory. If I can't root it, then I can't really use any new applications, since there is no room.
One more question: Am I right if I say I could flash the phone without rooting it? Only that there are at the moment no mtk6575 roms to flash on it?
You're my last resort, else I'll just accept the phone is unrootable and probably buy a new one.... Any help would be much appreciated!
i did factory reset - and network signal is gone for the same above fone
do u have any solution
i tried all possible solutions
some say it is 2.3 not 4.2.2
do u have rom (cumsum)
when i tried to restore data - it said cumsum match error
kingvasudev said:
i did factory reset - and network signal is gone for the same above fone
do u have any solution
i tried all possible solutions
some say it is 2.3 not 4.2.2
do u have rom (cumsum)
when i tried to restore data - it said cumsum match error
Click to expand...
Click to collapse
Hey man,
I think it's not possible to make a full back-up without rooting the phone is it? Else I'll be glad to help you out.
I can make a scatterfile with the mtkdroidrootprogram.. but the 'backup' button in mtkdroidroot is grey.
If you tell me how to make a backup I'll gladly help.
So I probably shouldn't just try and flash my phone? Good chance I brick it...
Best regards,
R.
ps. I'm dutch but happened to be in Hyderebad not so long ago
I got root on a s4-clone with the same specs as the first poster.
I used Cydia Impactor.
I can not attach links, so just google it.
megabirger said:
I got root on a s4-clone with the same specs as the first poster.
I used Cydia Impactor.
I can not attach links, so just google it.
Click to expand...
Click to collapse
Thanks for your reply! But...
Cydia Impactor does not recognize my phone. (errormsg: "/data/local/tmp/impactor-5" or "no such device")
Which drivers did u use?
S3 Mini Clone Korea
any of you know how i can root may s3 mini clone korea mtk 6575? any info would be appreciated! thanks a bunch!
chubywoobee said:
any of you know how i can root may s3 mini clone korea mtk 6575? any info would be appreciated! thanks a bunch!
Click to expand...
Click to collapse
i also have the same unit and i tried every rooting method but no success. What i did is i just install superuser app and it works. hope this help. cheers.
HydraNL said:
Hi all,
Let me first thank you for the wonderful website that you've created here, it already really helped me out.
Now, I want to root my fake Galaxy S4. I know the pain of people who ask questions without trying to look around for a solution themself. Yet, after a few full days, starting without any knowledge of smartphones, working my way trough all the terminology and trying to root my device... the only thing I know left to do is asking for your help. I sincerely hope this is 1) the right place 2) I'm allowed to ask this here and 3) there is not already a simliar topic... If I still failed then feel free to redirect me, move me, etc.
I bought the following device:
Hardware : MT6575 (SAMSUNG is aFake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130606-103654
Android v : 4.2.2
Baseband v: MAUI.11AMD.W11.50.SP.V37, 2013/05/06 11:21
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Thu Jun 6 18:33:27 CST 2013
This is what I did:
Drivers:
- I've downloaded and succesfully installed pda drivers.
- I've manually installed MT6575_USB_VCOM_drivers by connecting my phone while holding the volume button. These drivers appear, but disappear again in the Device Manager.
Tried Roots:
- This one of course. But the 'Restore button' does not pop up.
- SRSRoot - does not work
- New graphical method for MTK6589,MTK6577,MTK6575 - does not work
- Manual way directed via MTK Droid Root en Tools:
I failed here at step 7. Mtk drooid Root does not make the CWM automaticly.
Furthermore:
- Tried removing all user data in Recovery Mode, but when I press the power button to select the option it simply does not react.
- I can not enter 'download mode' as far as I know.
- I know there are more methods in Gizbeat 101, but I can't acces them right now... as I'm not a full member there and somehow got instabanned.
- I have the idea they could help me at the Russian fora.. I found this thread with help of google translate... but I don't speak Russian and can't figure out what to do.
Can anyone help me out? This phone has hardly any internal storage. I can't remove most of the applications and a lot of appliacations first install on it's internal memory. If I can't root it, then I can't really use any new applications, since there is no room.
One more question: Am I right if I say I could flash the phone without rooting it? Only that there are at the moment no mtk6575 roms to flash on it?
You're my last resort, else I'll just accept the phone is unrootable and probably buy a new one.... Any help would be much appreciated!
Click to expand...
Click to collapse
please send me your backup, i will make cwm 6.0.3.0 recovery for you.
make your backup with mtk droid tools 2.3.8 . connect phone with usb, click on root . it will root temporary . click on the bakup . creat backup and upload on the 4share or any other place and send me link.
i will make cwm recovery for you if you like TWRP recovery i will make also for you
try
try kingoapp i rooted my phone with the same chipset of yours.. just give it a try..
reminders:
+allow usb debugging
+ur pc needs internet connection
+remove sd card
+do factory reset
just google about kingoapp since i cannot post a link here because i am new member...
Porklo said:
try kingoapp i rooted my phone with the same chipset of yours.. just give it a try..
reminders:
+allow usb debugging
+ur pc needs internet connection
+remove sd card
+do factory reset
just google about kingoapp since i cannot post a link here because i am new member...
Click to expand...
Click to collapse
Thanks for the tip.
Won't the factory reset brick my phone? Since it won't install the hacked ROM?
I tried it without the factory reset but it says "This is not a real Samsung." Will that really change if I factory reset :S?
Try Farmaroot Application buddy. It will work.
forever king said:
Try Farmaroot Application buddy. It will work.
Click to expand...
Click to collapse
Your device seems not vulnerable to exploit included in Framaroot
HydraNL said:
Your device seems not vulnerable to exploit included in Framaroot
Click to expand...
Click to collapse
Oh, then did you tried " TPSparkyRoot" method? and sorry, i thought you're using mt6577.
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
ahmadw said:
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
Click to expand...
Click to collapse
Just fyi, if you still wanna know:
In 3e, you can execute the commands by hitting the lower left touch key, think it's the menu button took me like forever to figure that out
Anyways, I probably got the same mobile, it is a mtk6575. But I am not sure which custom rom I could install safely. Which one worx for sure?!
Eroot
ahmadw said:
Try the software eroot. Everything is in Chinese but I just clicked and clicked and finally got my phone (clone s4 mini Korean) rooted.
I now have my phone bricked when I tried to install some fonts. I got into the 3e recovery but cannot execute the command.
Click to expand...
Click to collapse
Man! After several hours and efforts on trying root my chinese s4 clone, I saw your post about eroot!
It just worked like a charm!
Thank you!
Hi guys,
I have a S4 mini clone with the follow config:
--About the phone info
Device Name: GT-I9190
Model number: GT-I9190
Android version: 4.2.2
Baseband version: I9190XXUAMF5
Kernel Version: 3.4.0-849021 [email protected]#1 Thu Jun 13 16:52:08 KST 2013
Build Version: JDQ39.I9190XXUAMF5
SELinux state: Permissive
--Antutu tester info
Phone model: GT-I9190
Phone brands: Samsung
CPU model: ARMv7 processor rev 10(v7l)
CPU frequency: 13.53
CPU manufacturers: SAMSUNG SERRANO
Internal RAM: 1349(MB)
Internal ROM: 107(MB)
Android OS version: 4.2.2
Version: JDQ39.I9190XXUAMF5
Kernel Version: 3.4.0-849021 [email protected]))#1 SMP PREEMPT Thu Jun 13 16:52:08 KST 2013
Screen Resolution: 540x960
--Factory mode info (hold volume up + power button when phone turned off)
BB Chip: MT6575
MS Board: GT-I9190
Modem Ver: MAUI.11AMD.W11.50.SP.V37 2013/08/20 12:45
Build time: 2013 09 27 14:25:07 CST
UBoot ver.: 2010.06
Kernel ver: 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Sep 27 14:21:49 CST 2013
Android ver: 2.3.6
SW ver: MDK_V2.1_K18_en_tp6306_v2.3
Custom Build Verno. : 1380262921
It's a clone from China/Korea/Japan (I don't know) and I would like to root and update the android version but I've tried a lot of different tutorials but no success in anyone.
I tried to put my phone on Download mode (Hold volume down + home button + power button) but it only show a screen with the android robot and a triangle with white borders and an exclamation inside. It is the recovery mode (Android recovery mode <e> with some options appears if I press home button)
Could somebody help me on this?
I tried:
* Odin -- Does not recognize my phone because it is not in download mode
* Mtk droid tools:
--->>> Connect to device <<<---
--- Nand Page/Spare = 2048/64
--- Start ZergRush ...
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
--- Through CWM it is possible to get root on this phone!
* PdaNet -- Don't do nothing, loose of time testing it!!
* SP Flash Tools -- When I choose the scatter file (generated by MTK Droid tools) the list of downloads does not fill the 'Location' and it does not let me download anything.
Nothing works. I really would like to root because I want to update android and uninstall a bunch of chinese/korean apps that shows semi naked women in the middle of screen from nothing. Depending on the situation it can cause an embarrassment for me.
Please help me!!!!!!
s4 I9500 replica
can some one help me get the rom for a mt6575 I9500 dual core 1Ghz, 512rami managed to flash a few roms, but i think those are not for my device, cause most of them are S3, or note, but it matches cause of the NAND flash file on them, can some one help me with this?, device dont turn on or charge, but ican make it work on pc to flash by holding down volume- key and then pluging cable to pc, when first red bar pass i but the battery and flash is complete(this is using SPFlash Tools.
Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/show....php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/show....php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
thedede said:
Hello, my device is a 10.1" Mediatek tablet, marketed as Jlinksz model D101. Tablet info from MTK Droid Root & Tools v2.5.3b:
Hardware : MT6572 (MT6582 is Fake!)
Model : D101
Build number : D101_vCC076_20140812
Build date UTC : 20140812-063145
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/04/21 14:41
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Aug 13 10:58:17 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 1-d101_dpi_lvds
It is running the stock 4.2.2 rom. I rooted it with Framaroot then added CWM. I made & have a MTK Droid Root & Tools system & NAND backup (following the instructions in this thread http://forum.xda-developers.com/show....php?t=2160490), & two CWM backups. My ultimate goal is to swap the SD to alleviate the limited internal storage. I edited the build.prop and rebooted to find that my SD card wasn't found. At that point I decided to flash my CWM backup for the first time. Since flashing my CWM backup I have a red watermark across all system screens "Copyright (c) Jlink Inc. All rights reserved!". When the device first boots the Mediatek logo appears briefly, then the word "Android", then the system. The Mediatek logo & Android screens aren't affected by the watermark. All other screens, regardless of an application running or not, have the watermark. I've searched the forums and haven't found people with the same problem. This watermark issue seems somewhat similar to http://forum.xda-developers.com/show....php?t=1917262, but I don't know that the solution would be applicable as the device is different. I've been searching "watermark", perhaps a different term is more appropriate? Please push me in the right direction as to how I might be able to remove this watermark. Thanks much!
Click to expand...
Click to collapse
i have this tablet. Please help me to root this. I need cwm. do you can help me? thanks the link istructions do not work
andrea! said:
i have this tablet. Please help me to root this. I need cwm. do you can help me? thanks the link istructions do not work
Click to expand...
Click to collapse
Your post is completely off topic. Please stop defecating in my thread.
I actually believe you are telling me you don't know how to search the forums. On the top left of this screen click on the search glass icon. Then, in the "Search all forums" box that appears type "framaroot", and hit enter on your keyboard. Click on the first link and read all the posts in order. When you are finished you will have read how to root the device. Now, click on the search glass icon again. This time type "MTK Droid Root & Tools", and hit enter on your keyboard. Click on the first link and read all the posts in order. When you are finished you will have read how to install CWM on the device.
that is the water marrk from the program jlinktools same hapens with wiselinktools i have the same problem and i have try many rooms but all the 7 roms hapen the water mark i have just not see that mark on 1 messup rom from lenovo s...
i dont find any option to disable that mark on that tools when i flash
Hello,
Its been more than 10 days i am trying to fix my phone . it is a china phone with mtk6582
I had many popups that was difficult for me to work on the phone (make a call, answer a call, etc)
I managed to root it and install antivirus prog.
the situation was better but still not ok.
Then i installed one prog that could erase system apps and i made a try with game center.
That was the start.
After that the phone boots but it can't load properly. The screen flashes and i can see between the flashes that it tries to load something (the launcher maybe??) .
When i try to unlock the screen i have a steady screen but when unlocked flashes again..
the notification bar works even though the screen flashes.
The unbrick procedure started with trying to install all the ported roms i could find with the porting guides of xda, mtkroms mtkcrom and others.
Still no success.
Now i am trying to learn adb and fastboot
I have cwm 5.5.0.4
I took rom backup with MTKdroidTools after the problem.
I assume that the rom backup is not ok since it is taken from a problematic phone
I think that my problem could be solved easily if i new what to fix in the system folders (file/s missing or correct some info into some file).
I could also do the porting but i had no luck and tried at least 20 times.
this is the listing ebay phone
Please any thought is welcome.
This is from mtkdroidtools :
Hardware : MT6582
Model : V12
Build number : S5_JB5(82)_3G_EMMC_64_8_XLD_V12 20141119-100020
Build date UTC : 20141118-065820
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V28, 2014/04/04 15:53
Kernel v : 3.4.5 ([email protected]greate-desktop) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 SMP Wed Nov 19 10:18:41 CST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 0-nt35517_qhd_dsi_vdo
Pls anybody apparently i have some adwares and trojans into my system apps like smsmanager, rstech_knile etc all system apps cant be disabled or removed, only flashing rom is option, but i cant find any rom for this model pls is any other simmilar model that i can use maybe there is some tablet that have same rom model or something like that. Thanks in advance for help.
Hi everyone,
I also have this device and I'm willing to report my case because I'm also in search of the proper ROM for this device which I recently messed up (hardbricked) by flashing wrong ROM.
I was recently struggling to remove the malware and viruses that were installed by some of the in-built applications coming with this device. Tablet became very unusable, especially when it was using any kind of internet connection which was exploited by malware applications showing me tons of the ads and pop-up windows on screen.
It was impossible to download and install any application using Google Play store because tablet end in glitches running malware software in background thus occupying nearly all available memory. The only thing that would help for a while was rebooting it again and disabling any kind of internet connection, uninstalling and disabling malware and infected apps.
This would release some RAM but not for long. After few minutes tablet gets unusable and sometimes reboots itself. Each reboot would refresh and re-install removed malware software and same story happens again.
Then I came to idea to try to wipe all data using recovery mode, but even this didn't help. System was infected in its core.
Then I tried installing KingRoot, Stubborn Trojan killer, Malwarebytes apps using Wondershare MobileGO PC application for managing Android devices over USB. I was able to install manually downloaded .apk files of these apps to the tablet. But running this applications or trying to regain ROOT status would reboot tablet again and again giving me no other chance except to try to flash its ROM.
The main mistake I've made is not making any kind of current device ROM backup using MTK droid tool or any other kind of tool. Because I'm not too much in Android world, I though I could flash it (using SP Flash tool) with "similar" ROM content coming from different device but I was VERY VERY wrong. Doing flash with wrong ROM instead of my device ROM (which I didn't backup), I've made my tablet hardbricked, infact it is 99,99% dead because it doesn't want to turn on and charge anymore!
Please don't mess up Your device like I did with mine!!! It turns out that you must have 100% compatible ROM image with your device!!! To be 100% sure about Your device specs, You must previously read all information like firmware, motherboard, CPU, etc... using any kind of software (if your device is still alive) OR open it and see what's under the hood of device and make notes about it. For HOW-TO flash Android device research the Youtube/forums/blogs/google...
Anyway, there might be some hope if someone notices posts in this thread. My tablet can be decteded on PC once it gets connected over USB cable. In Win7 (32bit), after installing MediaTek USB VCOM drivers, it is currently seen on MTK USB Port (COM7). But once connected on PC over USB cable, it gets connected and reconnected on every few seconds. I've read somewhere on forum that this is expected case, but not totally sure. I'm still wondering why tablet is not detected under DA USB VCOM Port or Preloader USB VCOM Port as expected for flashing purposes in SP Flash tool.
I've already tried to use few ROMs and flashed my device but I couldn't find proper ROM yet. XWAVE brand cannot be found among few popular Android ROM websites.
After hours of searching I've found a thread about XWAVE XPAD G3 701 on some Vietnamese forum. The link is (message me)
After registering on this forum, forum revealed a link to the rar file containg ROM backup for this device. I've tried to flash my device with this ROM using SP Flash tool but it was still unsuccessful.
No matter how much I tried, I keep getting these 2 error codes (google them), 4032 and/or 1042. I didn't know if I'm doing something wrong or this ROM seems incompatible to my device version, but flash process is stuck at first stage in SP Flash Tool "DOWNLOAD DA 100%" (red bar).
Then I decided to look under the hood of my tablet and I found that my tablet's firmware is not the same as one in the ROM I've downloaded. This is probably why I can't properly flash this tablet (or I'm still doing something wrong or my tablet is 100% dead). Since this tablet has non removable battery, I've tried to keep pressing Volume - (and other key combinations) while connecting device to PC and before flashing starts.
Anyway, If anyone can make/share 100% compatible ROM image to my device specs for me/other people to try to flash it, that would be great.
My devices specs under the hood are NEXT :
**********************************************
Firmware from chip/motherboard : MY706DV2 (HJ(BI),4G+768M(MI),4.4W (QA)) | YXEL 2014080471E090100505 | QR code on chip scanned value : 080471V2H4G768M4.4W1J
It also has SAMSUNG chip (maybe memory) : SAMSUNG 404, KLM4G1YE4C-B002, N702VQB4C
Battery readings : T-356595P MTK, 3.7V 2800 mAh Li-On, 140822A WTD
Other SPECS
*********************************************
Hardware : MT6582 (MT8312 is Fake!)
Model : Xpad 3G-701
Build number : Xpad 3G-701.V1.0
Build date UTC : 20140819-160749
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V35, 2014/03/12 14:00
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1
SMP Sat Aug 9 15:18:49 HKT 2014