hello friends I have a problem with my s2, is that recently had cm 10.2 and they were giving me problems the gapps then I recommended re-they install gapas, is that hize but mistakenly install gapps that were not then when lit would not let go when the phone boot configuration came out I went out and pulled me wrong, I thought of reinstlar again but this time let me not get into recovery mode (rare) good then wanted to try the last SamMobile stock and with odin and now flashe not pass the screen of at & t, and does not enter recovery mode still only download mode, and been reading and what I see I q flash a rom 3 files for q re-partition is made and is clean, any suggestions?
...
If you can get to download mode flash back to stock and start again: http://forum.xda-developers.com/showthread.php?t=1286432
Also be sure to read the thread entropy links to:http://forum.xda-developers.com/showthread.php?t=1313659
If you can get into the download mode, use odin to flash Clockwork back.
Something I flashed once messed up the recovery partition, but once I flashed clockwork back,
I was able to restore my phone from a back up.
Related
Hi I hope someone can help me. I have searched this forum but could not find a similar situation to what I ended up in...
I tried to install a custom ROM on my Galaxy Tab 10.1 using the CWM/Odin.
This seemed succesful but was not, it did not start but was stuck in the Samsung logo.
So I tried entering the CWM and download and install an original Samsung ROM. I can get it into CWM, but CWM cannot enter the download mode only the other mode.
In this mode all options are available:
- reboot
- apply update from SD card
- wipe data/factory reset
- wipe cache partition
All options have been tried without any luck. In the update from SD card it only shows ...
or Error opening /data/media: no such file or directory
Any ideas how I could get this directory back or put a ROM on the Samsung in this situation.
Odin does see the Galaxy but as I cannot get it into Download mode I am unable to download anything to it.
All or any suggestions are very welcome!
1. CWM (Clockworkmod) =! Odin.
In the beginning, you don't have CWM installed. You install CWM, by flashing CWM on your Phone with odin.
Odin is the Windows Programm, that is used to flash Recoveries/ROM's/Kernels onto your device.
2. it seems, that you still have the default Samsung recovery installed, that meand CWM is not yet flashed on your device.
If the flashing process was succesful (I suppose it was done with odin), but you can't get past the Samsung logo, that means, you probably flashed a rom, that isn't made for your device(ex. a GTab 10.1v Rom).
If you DID flash a wrong rom, then you probably ****ed up the partition table and removed the Download Mode(Odin Mode). Strange thing is, that you still have the Stock recovery.
Could you please redirect us to the rom you downloaded?
Also, did you flash with a repartition on and/or a .pit file?
hi Kaukassus,
thanks for the reply.
OK I checked the files and what I did.
I think I totaly screwed this up. It was a theme I tried to install the AOSP_HC_v1.3_3G+KI1.
I rooted the Tab. So first when the Tab was still functioning installed it on the TAB via USB.
Than tried to install this via update from SD card.
This appeared to work initially. But hung at the start.
After that I tried (via Power Volume Up) wipe data/factory reset.
No luck.
After that I tried wipe cache partition followed by wipe data/factory reset.
And this is what I got now..
Bad news is the Tab was/is a X-mas present and I managed to screw it up even before I officially got it !-(
The valuable lesson you're learning is that you need to be aware exactly what things you're flashing and their compatibility with your device and the software it's running.
You haven't mentioned what specific device you're using or the specific things you've tried to flash (as kaukassus pointed out, direct links to threads where you got the files you tried to flash are best). Not sure if you're aware but not all GT 10.1's are equal; there are several models out there and each and every ROM is specific to a particular device. Verizon LTE GT 10.1's like mine can't take ROMs from any other device for example, it's likely that the new T-Mobile 4G one's wont be able to trade ROMs with Verizon ones . . you get the point.
When you say you installed via USB what exactly did you mean? If you simply copied a zip file via USB to the tab to flash in recovery mode that's not installing; the flashing from recovery may be but the file copy operation is not. If on the other hand you pushed things via ADB or you flash using Odin software then that's a different story.
Best thing to do at this point is to properly identify your device, look for a stock recovery image for Odin and flash that via Odin to your device. At that point you can start from scratch again to build what you want.
Thanks Muzzy996.
You are right. I was in a rush and should have taken more time.
However I am getting somewhere. Managed to get in download mode twice today, don't ask me how. This Tab just will not go into download mode!
However I did not have the stock ROM ready to be installed.
Will keep you updated.
i have the same problem. i just rooted my device was going to overclock. decided to save my rom with rom manager. saved it device went to reboot now the samsung galaxy 10.1 shows up screen goes dim then shuts off, and will cont. do this. i can get into download mode but recovery will not work. is there anyway to download my stock rom. im using verizion 4g 10.1 any help would be great, btw sorry to thread jack
Problem solved.
Managed to get it in download mode again and install stock rom via Odin.
Appeared to work fine. But kep switching off, even after full night of charging.
This morning Tab was dead after recharging whole night..
Got it back on by holding volume down and power button down.
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
I crashed both my I9000 (galaxy s) flashing custom roms and my tab 10.1 (editing some system files) both ended up just looping but managed to get both back. I purchased a small connector of ebay £1.59 that has just a resistor accross pins 4&5 331k I think anyway plugging this into most samsung devices boots them into download mode. Even before getting my resistor I managed to get things working I think that you'd have to be properly unlucky to really brick a samsung I've flashed both my devices with all sorts of crap with my little resistor I just reset them with ease.
Brian
h2bmess said:
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
Click to expand...
Click to collapse
did you ever resolve this issue? i am currently faced with the same issue.
I have a Galaxy Note that was on Telus in Canada. I attempted to follow these instructions to install Cyanogenmod: wiki.cyanogenmod.org/w/Install_CM_for_quincyatt. Had alot of problems working with Windoz 8 - but eventually **seemed** to get the CWM installed. However, when I did the reboot to recovery mode, I got 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' I can't seem to do anything to get past this. I'm pretty much a beginner with modding my phone, so before I do anything else stupid, I'm asking for help. What can I do to either a) get back to my original install or b) try again with Cyanogenmod?
Thanks!
Strathgowan said:
I have a Galaxy Note that was on Telus in Canada. I attempted to follow these instructions to install Cyanogenmod: wiki.cyanogenmod.org/w/Install_CM_for_quincyatt. Had alot of problems working with Windoz 8 - but eventually **seemed** to get the CWM installed. However, when I did the reboot to recovery mode, I got 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.' I can't seem to do anything to get past this. I'm pretty much a beginner with modding my phone, so before I do anything else stupid, I'm asking for help. What can I do to either a) get back to my original install or b) try again with Cyanogenmod?
Thanks!
Click to expand...
Click to collapse
I had the same thing happen to me a couple of weeks ago. Picked the wrong package to flash and got the same error message. I had to boot into download mode and then load the stock ROM via Odin, then root.
That fixed it for me and now I'm flashing custom ROMS again (and carefully reading the name of the ROM I'm flashing before hand lol).
First, to install CWR on a Canadian phone you have to pull the battery from the phone and disconnect the usb cable the instant Odin says flash was successful, otherwise the phone reboots and overwrites the custom recovery with the stock recovery. Then put the battery back in the phone and boot into recovery. Then format, wipe, and flash the rom.
Hi everyone
My sister updated her MEGA OTA last month. She cant remember which version she was on. I am assuming it was 4.3. shes doesnt know much,
Her phone got stuck in bootloop.
Initially a got a hard time even getting into restore mode. however after a lot of goggling and trials and errors here is where i am today :
1- I can install TWRP and/or Philz recovery and boot into them.
2- I can enter download mode
3- I have tried installing many ROMS and different versions. I was only partially successful with 4.4 versions because I get a passed message in Odin however upon restart the phone enters boot loop again.
4- I have tried multiple wipe data/dalvik cache/cache and restoring factory settings but i still get the same results.
5- Only in Philz recovery i can mount the external SD card and copy zip files. I was able to root the phone that was (but im not sure if it still is). However all ROMs zip files I tried to install (both from PC and from extSD card) wouldnt open in recovery mode.
Because I get a passed message when I install a ROM from Odin , I dont know what the issue could be. But there is something wrong that happens as soon as this phone boots up.
I seriously do not know what to do anymore. I just need this phone to be working again. At this point I dont care about warranties/ROM versions/stock or custom...
Please help and sorry for my bad English
It sounds like you need to download the stock rom and flash it in Odin (you gotta put the phone in download mode to flash in Odin). The stock rom can be found on the sammobile website in the firmware section. That should get you back to square one (stock rom, stock recovery, no root). Then you start over from scratch.
Sent from my SGH-M819N using XDA Free mobile app
Thanks
I did and I still get the same problem.
In fact after installing stock rom, i could not enter "stock" so I installed philz recovery, logged in philz and wiped cache a couple of time, did a factory reset.
and yet when i restart , the phone is stuck in bootloop.
Maybe she has a Galaxy Mega with a repaired screen. Starting with 4.4 Samsung only supports a digitizer with Synaptics brand chip. It's a big mess and there are countless screens and digitizers made worthless. I think unofficial 4.4 by Cyanogen and others might work, but not official Samsung. With some Galaxy Megas you get a bootloop. With others it boots however the digitizer and touch functions no longer work. I don't know how to go back after you are on official 4.4 because last I saw, there was no root for it. If I'm wrong, someone else please clarify and continue to help.
IMHO only one way out from such situation is try to flash MegaFire MJ2 which is derived from stock 4.2. It's only one 4.2 ROM which can be safely flashed onto KK.
Iformation about MegaFire you can find HERE
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307
Hello everyone,
I own a samsung galaxy s2 gt-i9100 I've been using it for a long time. A few days ago i installed cynogenmod 13 marshmallow on it but faced some severe issues like dialler problems,battery drain,google play services not working. So, i switched it back to my previous rom i.e. cm 12.1 lollipop but my old twrp recovery got replaced by cynogenmod default recovery. Now some people who may have used it know that its very basic and does not has backup,restore, has bugs,does not flashes some zips or files that i wanted so i tried to replace it with twrp/cwm through rashr,flashify,rom manager,etc. But none of it worked, whenever I'd boot after flashing the twrp/cwm recovery it'll go back to the default cynogenmod recovery. Now, me not knowing what im doing stupidly downloaded mobile odin lite app then i downloaded the cwm kernel recovery kitkat compatible and installed via mobile odin lite. After that it got screwed, it won't just startup it'll just start and go into recovery i mean continuously! It was annoying, then i read an article on a forum to download any cm nightly or stable mod and flash it but i did a little bit of tweak of removing the recovery boot img file with twrp to get preinstalled twrp recovery but i gotta admit it was the last mistake possible. Now i sit here, with a bricked phone in my hand which is looping continuously only on the samsung logo. If anyone out there can assist me correctly it'll be a life saver for me. Thanks for reading this and please reply with a solution asap. Please! Im in danger!
can you get into download mode?
if yes you can download a stock firmware and flash but you will have to hope it will work, otherwise you will get stuck on nand write start which means the nand is stuffed/corrupted and then basically only a motherboard replacement will do the job, or you can try using another computer, reinstall usb drivers..
can you get into recovery mode?
if you can, you can flash a rom
The 'nand stuffed' assumption is a last resort, tried everything and nothing works assumption. There is *plenty* to try before assuming that the nand is 'stuffed'......
It sounds like (from your description) that you may have rendered recovery useless and inaccessible.
I've a feeling what you need to do is to go into download mode and Odin flash a firmware.
Even if it doesn't boot, you should have a recovery that you can flash PhilZ recovery from and then use that to flash a custom rom. Initially, I'd stay away from the MM builds and instead flash something KK or LP based as they're less 'volatile' and have a higher degree of stability than the MM roms.
http://i.imgur.com/rVnFwJM.jpg