Related
Earlier this week I bought a Samsung Galaxy S III for ATT. It already had Ice Cream Sandwich 4.0.4 on it and so I rooted it. Well the day after rooting it I get a message in my notification bar that there's a new software update available from ATT. Am I safe to do this update since my phone is rooted? I doubt the update is anything major, but does that make a difference?
fa7592 said:
Earlier this week I bought a Samsung Galaxy S III for ATT. It already had Ice Cream Sandwich 4.0.4 on it and so I rooted it. Well the day after rooting it I get a message in my notification bar that there's a new software update available from ATT. Am I safe to do this update since my phone is rooted? I doubt the update is anything major, but does that make a difference?
Click to expand...
Click to collapse
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1768826
You can apply the update if you're rooted using the method in that thread or by installing OTA Rootkeeper before you apply the OTA. If you apply the OTA directly, you'll need to go back to stock recovery, then install CWM again when it's done. You'll also probably want to backup the Google Search widget (I forget the exact .apk -- search the forums) and restore it after to avoid losing Universal Search.
But the easiest way is to just flash the zip in the thread above through your CWM recovery.
As for the contents of the OTA: It updates the kernel, bootloader, lots of applications, some system libraries, wpa_supplicant and it's firmware (I think that's for wifi), and the modem. I've got it installed and didn't notice a huge difference, but you might. The thread above also includes separate flash files for the kernel and modem in case you want to try just those.
Good luck!
drothenberger said:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1768826
You can apply the update if you're rooted using the method in that thread or by installing OTA Rootkeeper before you apply the OTA. If you apply the OTA directly, you'll need to go back to stock recovery, then install CWM again when it's done. You'll also probably want to backup the Google Search widget (I forget the exact .apk -- search the forums) and restore it after to avoid losing Universal Search.
But the easiest way is to just flash the zip in the thread above through your CWM recovery.
As for the contents of the OTA: It updates the kernel, bootloader, lots of applications, some system libraries, wpa_supplicant and it's firmware (I think that's for wifi), and the modem. I've got it installed and didn't notice a huge difference, but you might. The thread above also includes separate flash files for the kernel and modem in case you want to try just those.
Good luck!
Click to expand...
Click to collapse
Thank you very much. I appreciate the quick response and the help.
drothenberger said:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1768826
You can apply the update if you're rooted using the method in that thread or by installing OTA Rootkeeper before you apply the OTA. If you apply the OTA directly, you'll need to go back to stock recovery, then install CWM again when it's done. You'll also probably want to backup the Google Search widget (I forget the exact .apk -- search the forums) and restore it after to avoid losing Universal Search.
But the easiest way is to just flash the zip in the thread above through your CWM recovery.
As for the contents of the OTA: It updates the kernel, bootloader, lots of applications, some system libraries, wpa_supplicant and it's firmware (I think that's for wifi), and the modem. I've got it installed and didn't notice a huge difference, but you might. The thread above also includes separate flash files for the kernel and modem in case you want to try just those.
Good luck!
Click to expand...
Click to collapse
would I just have to reflash the kernel I'm on now if I were to update that way?
Sent from my SAMSUNG-SGH-I747 using xda premium
jrbaker624 said:
would I just have to reflash the kernel I'm on now if I were to update that way?
Click to expand...
Click to collapse
No. There's a zip file there with the OTA but with the bootloader and kernel updates removed. You can flash that to keep your kernel. There's another zip file there with just the bootloader if you want to update that, too. Just flash both (No Bootloader No Kernel, the Bootloader).
drothenberger said:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1768826
You can apply the update if you're rooted using the method in that thread or by installing OTA Rootkeeper before you apply the OTA. If you apply the OTA directly, you'll need to go back to stock recovery, then install CWM again when it's done. You'll also probably want to backup the Google Search widget (I forget the exact .apk -- search the forums) and restore it after to avoid losing Universal Search.
But the easiest way is to just flash the zip in the thread above through your CWM recovery.
As for the contents of the OTA: It updates the kernel, bootloader, lots of applications, some system libraries, wpa_supplicant and it's firmware (I think that's for wifi), and the modem. I've got it installed and didn't notice a huge difference, but you might. The thread above also includes separate flash files for the kernel and modem in case you want to try just those.
Good luck!
Click to expand...
Click to collapse
UPDATE:
okay so I followed the steps in the thread you provided, and when I go to flash the update zip in recovery mode, i get an error and it aborts the installation. Heres the error:
assert failed: getprop("ro.product.device") =="
d2att" | | getprop("ro.build.product") =="
d2att"
E:Error in /emmc/I747UCALG1_OTA.zip
(status 0)
Installation aborted.
Any idea as to what this may mean?
I am also getting same error I was on team epics recovery then saw it wouldn't work for that recovery so I flashed a new recovery and still get the same error.
Tried flashing the no boot loader zip. And the no boot loader and no kernel zip
Sent from my SAMSUNG-SGH-I747 using xda premium
fa7592 said:
assert failed: getprop("ro.product.device") =="
d2att" | | getprop("ro.build.product") =="
d2att"
E:Error in /emmc/I747UCALG1_OTA.zip
(status 0)
Installation aborted.
Any idea as to what this may mean?
Click to expand...
Click to collapse
It means you're using the Team Epic recovery and not the one from clockworkmod.com. Try installing the 5.8.4.5 version of clockworkmod.com recovery from here: http://forum.xda-developers.com/showthread.php?p=28612095. That link has zip files you can flash from your current CWM recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
drothenberger said:
It means you're using the Team Epic recovery and not the one from clockworkmod.com. Try installing the 5.8.4.5 version of clockworkmod.com recovery from here: http://forum.xda-developers.com/showthread.php?p=28612095. That link has zip files you can flash from your current CWM recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Oh I see. So should I just download that file and replace the CWM zip file thats already on my phone. Or do I have to do something in Odin again?
fa7592 said:
Oh I see. So should I just download that file and replace the CWM zip file thats already on my phone. Or do I have to do something in Odin again?
Click to expand...
Click to collapse
Download OTA Rootkeeper from the play store, save root, then install the OTA. Reboot and OTA rootkeeper restore root.
drothenberger said:
It means you're using the Team Epic recovery and not the one from clockworkmod.com. Try installing the 5.8.4.5 version of clockworkmod.com recovery from here: http://forum.xda-developers.com/showthread.php?p=28612095. That link has zip files you can flash from your current CWM recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Downloaded that one instead of the third one you had linked all together and it worked. Thank you
Sent from my SAMSUNG-SGH-I747 using xda premium
Download the zip file for recovery, apply it using your current recovery, reboot recovery from the advanced menu, then apply the OTA zip.
Or use OTA Rootkeeper as also suggested. I prefer my OTA zip personally, but either way will work.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
drothenberger said:
Download the zip file for recovery, apply it using your current recovery, reboot recovery from the advanced menu, then apply the OTA zip.
Or use OTA Rootkeeper as also suggested. I prefer my OTA zip personally, but either way will work.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Okay. Wow. So after a lot of trial and error (i think i bricked my phone somehow in the middle of everything, but its okay I found out how to fix it) I have managed to get that update applied. Theres one last problem though. I applied the update by flashing it in CWM recovery. I know I have the update installed because now under baseband version instead of saying I747UCLEM it says I747UCLG1. And Ive tested the google search widget and it's still giving me local search results so that's all good. The problem is that in my notification bar the ATT software update notification is still there. I have currently postponed it for 8 hours, but its still there and the only button I'm able to press is the continue button. I dont want to press this because im afraid the normal ATT update will install over the modded one and the google search widget will mess up and stop displaying the local search results. Also under about device, when I click software update the option for "check for update" is grayed out. Any thoughts on this?
fa7592 said:
Okay. Wow. So after a lot of trial and error (i think i bricked my phone somehow in the middle of everything, but its okay I found out how to fix it) I have managed to get that update applied. Theres one last problem though. I applied the update by flashing it in CWM recovery. I know I have the update installed because now under baseband version instead of saying I747UCLEM it says I747UCLG1. And Ive tested the google search widget and it's still giving me local search results so that's all good. The problem is that in my notification bar the ATT software update notification is still there. I have currently postponed it for 8 hours, but its still there and the only button I'm able to press is the continue button. I dont want to press this because im afraid the normal ATT update will install over the modded one and the google search widget will mess up and stop displaying the local search results. Also under about device, when I click software update the option for "check for update" is grayed out. Any thoughts on this?
Click to expand...
Click to collapse
What does it say under build number? IMM76D.I747UCALG1? If not, then somehow you only got the modem installed.
I have the update applied, but I had frozen AT&T Software Update in Titanium Backup, so I wasn't getting the notification. I just tried unfreezing it and checking for an update and was surprised when it said there was one! I postponed it, did a Wipe Data for AT&T Software Update in TiBu, then rebooted and now all is well. When I check for an update now it says I'm up-to-date. So try that.
drothenberger said:
What does it say under build number? IMM76D.I747UCALG1? If not, then somehow you only got the modem installed.
I have the update applied, but I had frozen AT&T Software Update in Titanium Backup, so I wasn't getting the notification. I just tried unfreezing it and checking for an update and was surprised when it said there was one! I postponed it, did a Wipe Data for AT&T Software Update in TiBu, then rebooted and now all is well. When I check for an update now it says I'm up-to-date. So try that.
Click to expand...
Click to collapse
Yeah, under build number it says IMM76D.I747UCALG1.
I'll give what you said a shot and see what happens. But one thing first, what's TiBu? And also, I'm about to flash a custom ROM on my phone, so is the update issue something that can wait, or should I take care of that before I put on a custom ROM?
fa7592 said:
Yeah, under build number it says IMM76D.I747UCALG1.
I'll give what you said a shot and see what happens. But one thing first, what's TiBu? And also, I'm about to flash a custom ROM on my phone, so is the update issue something that can wait, or should I take care of that before I put on a custom ROM?
Click to expand...
Click to collapse
Sorry, "TiBu" is my shorthand for Titanium Backup. Chances are any custom ROM you install will remove the AT&T Software Update application, so you won't need to worry about this anymore.
drothenberger said:
Sorry, "TiBu" is my shorthand for Titanium Backup. Chances are any custom ROM you install will remove the AT&T Software Update application, so you won't need to worry about this anymore.
Click to expand...
Click to collapse
Oh okay. In that case I'll go ahead and put in that custom ROM and report back when everything is done. Again, thanks for the help and patience.
Okay, so I have applied the ROM and everything is good! Well for the most part. At times when there isn't a WiFi signal available and it has to use mobile data, the 4G LTE doesn't work. It will connect to HSPA or 3G. And it happens in areas I know has 4G LTE available. But other than that everything seems to be working good. Just thought I'd share in case anyone was thinking of using the AOKP ROM.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.
Hey all, I'm trying to install Sense 6 Toolbox on my phone. I have everything up to date software wise. When I install the framework, I install/update, then reboot. When it comes back on, it still shows that it isn't active. What can I do to fix it?
Wmckinnon46 said:
Hey all, I'm trying to install Sense 6 Toolbox on my phone. I have everything up to date software wise. When I install the framework, I install/update, then reboot. When it comes back on, it still shows that it isn't active. What can I do to fix it?
Click to expand...
Click to collapse
got S-OFF?
If your device still S-ON, you need to change install method to flash via recovery.
mafyas said:
got S-OFF?
If your device still S-ON, you need to change install method to flash via recovery.
Click to expand...
Click to collapse
Ok,cool. I am currently S-On, Where can I find the flashable zip to flash in recovery? Thank you for the help.
Wmckinnon46 said:
Ok,cool. I am currently S-On, Where can I find the flashable zip to flash in recovery? Thank you for the help.
Click to expand...
Click to collapse
I mean you need change the install xposed install method.
First, open Xposed Installer, goto Framework > Installation Mode > Choose Recovery(Flash zip automatically).
Go back menu proceed to install and reboot. Let see the result.
mafyas said:
I mean you need change the install xposed install method.
First, open Xposed Installer, goto Framework > Installation Mode > Choose Recovery(Flash zip automatically).
Go back menu proceed to install and reboot. Let see the result.
Click to expand...
Click to collapse
Oh,ok,gotcha. Thanks again for ur help,I appreciate it.
Lol. I read my own reply, I drunk maybe. Double repeated words. nahh, nevermind as long as you get what I mean. BTW, enjoy your max! @Wmckinnon46
S-off is not so necessary here,the most important thing is to root your system and install expose framework then activate sense 6.0 toolbox.After reboot your phone you will get the functioned exposed framework.
I got everything working perfectly, thanks for the help guys. Now I just need to flash an unsecure kernel so I can get S-Off. Last time I tried, I got stuck on the white logo screen for about an hour until I finally was able to figure out how to get back to recovery, then flashed my backup.
Sent from my HTC0P3P7 using XDA Free mobile app
So my watch recently downloaded the latest 6.0.1 update.zip and I'm more than happy to report: WE CAN FLASH IT VIA TWRP!
This update.zip was grabbed from /cache, however seems to be completely identical with the one you can download from here: https://android.googleapis.com/pack...3ec3e78cb2a7d3.signed-platina-ota-2576000.zip
Exciting news, means we don't have to reset our watch back to stock for it to flash
Here are the download links:
Dropbox
Google Drive
OneDrive
Happy flashing!
loving the new update. its so smooth.
eraycetin said:
loving the new update. its so smooth.
Click to expand...
Click to collapse
That indeed Once the watch was updated it lagged for about 10 minutes still, probably due to it doing stuff in the background after the upgrade. But once that was done it's now working great, smooth and awesomely well!
thanks.
i still wiped out everything to have a more clean experience. and faster.
Yeah I would say the only reason we don't have to go back to stock is that the ota contains completely brand new system image and boot and recovery of course so it thosen't even verify system files as they all get replaced anyway
Can we flash this new stock and then flash a custom kernel? Idk anything sorry, this will be my one annoying question for the day
For 6.0.1 there is no kernel at the moment.
MihaiSG said:
For 6.0.1 there is no kernel at the moment.
Click to expand...
Click to collapse
No kernel for 6.0.1?? Really??
Go here :
http://forum.xda-developers.com/showthread.php?t=3082669
I haven't checked the topic today. Good that it was updated, can't wait to test it. Thanks for the heads up
Gohma Custom Rom
Hey guys,
My watch is currently running Gohma ROM. can i sideload the update and install right on top, or should i return it back to full stock before installing it?
it does have TWRP installed...
livinstyle said:
Hey guys,
My watch is currently running Gohma ROM. can i sideload the update and install right on top, or should i return it back to full stock before installing it?
it does have TWRP installed...
Click to expand...
Click to collapse
you might be able to but doubt it just flash the system image and boot from here
Is it compatible with invisiblek's kernel 6.1?
Edit: this rom is the same as before, MEC23G, theoretically, it should be compatible...
Edit1: It is compatible.
Jhon998 said:
Is it compatible with invisiblek's kernel 6.1?
Edit: this rom is the same as before, MEC23G, theoretically, it should be compatible...
Edit1: It is compatible.
Click to expand...
Click to collapse
Um dude what are you on about there haven't been any updates since. Invisibleks kernel was made for that build anyway you can also try the non stock 6 version on his builds it has smartmax eps instead of on demand
Xmaster24 said:
Um dude what are you on about there haven't been any updates since. Invisibleks kernel was made for that build anyway you can also try the non stock 6 version on his builds it has smartmax eps instead of on demand
Click to expand...
Click to collapse
Lol I was lost I thought that the update was released yesterday, because the xda page of g watch listed this post as 22nd april as for the last activity not the actual post date...
hi guy's.I have a problem with this version.
when I put my phone on silent mode,my watch goes to"don't disturb mode" and when I turn off the "don't disturb mode" in watch,my phone go back to ring mode.I don't like this.
I want put my phone on silent mode and watch doesn't go to don't disturb mode.do you have this problem? Any idea for this?
is there any way to update my lg g watch without using "system update" and without using "stock recovery" ? i have problems with both of them, looking for a third method...
Help
I Download ROM + I Install TWRP On My Watch But I Don't Know to How install with twrp PLEASE Help Me
help
helppp me pls
MehranAB said:
I Download ROM + I Install TWRP On My Watch But I Don't Know to How install with twrp PLEASE Help Me
Click to expand...
Click to collapse
Do you know how to use TWRP? Copy update zip to watch using adb, reboot to recovery then flash zip. As it's a smartwatch you have to touch and swipe screen in a certain way to activate recovery, please search the forum for more info.
lfom said:
Do you know how to use TWRP? Copy update zip to watch using adb, reboot to recovery then flash zip. As it's a smartwatch you have to touch and swipe screen in a certain way to activate recovery, please search the forum for more info.
Click to expand...
Click to collapse
Thank You! But What is the exact command to copy the update file.zip to LG G watch via ADB?
Regards
Hello, dear friends. Recently I built a new custom ROM for SM-N915V Multilanguage edition based on latest firmware N915VVZW2CQI3. Default language is Russian I used some deodexed files from SM-N915F and SM-N915FY when built this ROM. The ROM is tested on my Galaxy Note Edge Verizon Phone. It is works excellent and stable. It is looks like SM-N915F. All Verizon programs and some apps like Hangouts, PenUp, Google Music, Instagram, Flipboard removed. At first on your phone must be installed a new firmware. https://forum.xda-developers.com/no...opment/verizon-note-edge-marshmallow-t3689387 Then, after download TWRP.rar file unpack it and copy TWRP folder to your phone or external SD Card. Go to TWRP Recovery Wipe menu and wipe dalvik/ art cache, cache, data, system. Go to restore menu and select storage where you copy unpacked TWRP folder. Select my backup and restore System. The system will install more than usually, please don't panic. Everything will be good.
This backup is tested and 100% working. Before installing my ROM, create a full backup of your system. So you have no risk. Please, after installing the ROM, write your feedback, it is important to me.
Download TWRP BackUp: https://mega.nz/#!hm53XaTR!7TmPmO3B1fhs7pc6XHcXLgh_DeCmLRwyWtv4DTK7cKM
Thank you for your work. Needs a decryption key for the link though
SPMelly said:
Thank you for your work. Needs a decryption key for the link though
Click to expand...
Click to collapse
I changed the link. Can you download now?
Grigory1980 said:
I changed the link. Can you download now?
Click to expand...
Click to collapse
nope. asks me to login and when i do it just takes me to my userpage
SPMelly said:
nope. asks me to login and when i do it just takes me to my userpage
Click to expand...
Click to collapse
Sorry, I am novice. I've never used MEGASync before. I hope now everything is normal.
Grigory1980 said:
Sorry, I am novice. I've never used MEGASync before. I hope now everything is normal.
Click to expand...
Click to collapse
Yup downloading now. Thanks so much. Will be trying this out soon
View attachment 3821683
This is what I get
SPMelly said:
View attachment 3821683
This is what I get
Click to expand...
Click to collapse
Which version of the ROM you had installed before? May be 5.0.1?
Grigory1980 said:
Which version of the ROM you had installed before? May be 5.0.1?
Click to expand...
Click to collapse
I just upgraded to MM before flashing the rom
SPMelly said:
I just upgraded to MM before flashing the rom
Click to expand...
Click to collapse
Please, give me some time
Grigory1980 said:
Please, give me some time
Click to expand...
Click to collapse
It's all good. I'm in no hurry. Just eager to test
SPMelly said:
I just upgraded to MM before flashing the rom
Click to expand...
Click to collapse
Dear friend now I uploaded a new file without bootloader, please, install bootloader separately like .img , then install system like .zip
https://mega.nz/#!WgFy0KQI!1jeemt-Xvr6Iq69-k8w7scCTCy_aBZ7BAs86MayTOmA
https://mega.nz/#!Ps8n0RqL!fQHguYbgkiC2zyEHDoCs04AKFQvwZq_xKMfyLsLHLgw
Grigory1980 said:
Dear friend now I uploaded a new file without bootloader, please, install bootloader separately like .img , then install system like .zip
https://mega.nz/#!WgFy0KQI!1jeemt-Xvr6Iq69-k8w7scCTCy_aBZ7BAs86MayTOmA
https://mega.nz/#!Ps8n0RqL!fQHguYbgkiC2zyEHDoCs04AKFQvwZq_xKMfyLsLHLgw
Click to expand...
Click to collapse
Now this is what I get.
Flashed img via twrp then the rom zip
SPMelly said:
Now this is what I get.
Flashed img via twrp then the rom zip
Click to expand...
Click to collapse
I'm so sorry, please, try this file. This version is like patch
https://mega.nz/#!v59HSI5J!0oa7EGR0mbTghr_qvo4IgDWkXwc23ieVhVQsHhAf5DI
If this method will not work, try to install my system backup. This is backup of my phone including system and bootloader. Unrar, copy folder to your phone and restore by CWRP.
https://mega.nz/#!nlVXmYjb!W87Ari7hGieBqhnLHvQd6Xi7BDL4MRExzj3Me5BRQOA
Grigory1980 said:
I'm so sorry, please, try this file. This version is like patch
https://mega.nz/#!v59HSI5J!0oa7EGR0mbTghr_qvo4IgDWkXwc23ieVhVQsHhAf5DI
If this method will not work, try to install my system backup. This is backup of my phone including system and bootloader. Unrar, copy folder to your phone and restore by CWRP.
https://mega.nz/#!nlVXmYjb!W87Ari7hGieBqhnLHvQd6Xi7BDL4MRExzj3Me5BRQOA
Click to expand...
Click to collapse
That flash with the Update zip was successful. I get to the checking connection part of setup though and it never finishes. The 4g and wifi icons show and it says connected when i sign into wifi but im not getting any data.
I finally pushed the skip button at checking connection and i tried to sign into google play and i got nothing. Says theres no connection.
Oh and S Note stops and force closes.
And the TWRP backup -
S Note stops during setup as well. And again no data connection. The icons are there and active but still no data, cant sign into google play.
SPMelly said:
That flash with the Update zip was successful. I get to the checking connection part of setup though and it never finishes. The 4g and wifi icons show and it says connected when i sign into wifi but im not getting any data.
I finally pushed the skip button at checking connection and i tried to sign into google play and i got nothing. Says theres no connection.
Oh and S Note stops and force closes.
And the TWRP backup -
S Note stops during setup as well. And again no data connection. The icons are there and active but still no data, cant sign into google play.
Click to expand...
Click to collapse
I know this problem. Do not do anything else with the firmware.
Install this program freedom, then you can uninstall it if you want. The program helps you buy coins in some games for free.
https://mega.nz/#!G18FXJTa!w-nRKzek53tD9CkK-6wb4jx4teRArgb12fkX6PPqZOc
I don't know why SNote doesn't work I will send to you another SNote and you can install it by TWRP again and then it must be updated by Play Market
https://mega.nz/#!fpNWXSqQ!-AWuyQnhTbx82kVdQEyG6T7ll2zQg-CJKeqz2tBRrxU
SPMelly said:
That flash with the Update zip was successful. I get to the checking connection part of setup though and it never finishes. The 4g and wifi icons show and it says connected when i sign into wifi but im not getting any data.
I finally pushed the skip button at checking connection and i tried to sign into google play and i got nothing. Says theres no connection.
Oh and S Note stops and force closes.
And the TWRP backup -
S Note stops during setup as well. And again no data connection. The icons are there and active but still no data, cant sign into google play.
Click to expand...
Click to collapse
Now I create another new backup without Freedom. I hope now everything will be normal Thank you for your patient, dear friend.
i have a never ending bootloop no matter what I try, I tried wiping everything, system,cache,data, and dalvik cache and still nothing, I get to the starting apps screen in Russian and as soon as it finishes it bootloops again, any help?
Jeanboiiii said:
i have a never ending bootloop no matter what I try, I tried wiping everything, system,cache,data, and dalvik cache and still nothing, I get to the starting apps screen in Russian and as soon as it finishes it bootloops again, any help?
Click to expand...
Click to collapse
You must wiping only dalvik and cache. Which firmware was installed before?
I was using a 5.1.1 custom ROM, might that be the culprit?