Hi, yesterday I tryed to repartiton interal memory because I has only 800Mb for data, but I bricked the device. When I tried to start device it froze on startup logo. So i tried to flash the factory rom but now the phone don't start up...and the recovery don't work too...i tried with a lot of roms but no one worked...i don't know what to do anymore t-t i have tried everything!! Can someone help me?
Related
nothing similar seems to have happened to anyone on the specific phone.. i had miui custom rom and CWM RECOVERY installed on my phone but it was so buggy that i wanted to go back to cm9 (which i had before installing miui).. to avoid any bricks i decided to wipe data,cache,dalvic cache and i accidentally also wiped /system... when i realized what i did i rebooted my phone without installing another rom and it just showed up the lg logo which shows when it starts. it wont boot anyway :crying:. i cant boot into cwm (volume down and power) which i could do before the wipe. my phone was rooted. before going to cm9 i had installed custom rom firmwares through kdz updater. now when i plug my phone IT RECOGNISES my phone both on emergency mode and with the lg logo on the screen but when i install the kdz it stucks for a while and says phone was not found something like that. i downloaded odin but dont know how to use it. i also have a 2 gb external sd. i would really appreciate it if you could guys help me. if my phone is dead forever my parents will kill me though im having some hopes. sorry for being so talky i wanted to explain everything... ty
Don't be afraid brother It happened on my mobile thousand of times so I solve it by flashing rom using ADT (android download tool)
Just download any ADT custom rom for ur device search it on Google u will surly find it
The u can go back on ur recovery method for flashing roms .....
Works 110% on every device
I will surly like to help u in case any problem post below
HIT THANKS IF HELPED
I have Huawei u8500,two days ago I rooted it and there was too many apps so I wanted to factory reset it.In CWM recovery I choosed factory reset and when it rebooted it didn't load the start screen launcher.Some thread said that there is a danger of reseting data in cwm on rooted android.
Now It stays on android logo screen and doesn't load!!! I think it's soft-bricked.How can I solwe this,PLEASE HELP!!! THANKS FOR ANY HELP YOU GIVE ME!!!
hi guys
really could do with some help
i had flashed my u8850 when i first got my phone and played around with the custom roms which were not fully usable at the time. As my wife wanted the phone I flashed it to stock rom .. proper stock without root or CWM... with SUT l3 tool
now she gave it back to me as she upgraded, and i went to do a factory reset to clear out the contacts etc.. and start afresh.
it went and got stuck at the huawei symbol and hasn't gone off since.
since researching this, i found out that its a boot loop and anyone who has flashed a custom rom can never do a factory reset from the settings menu, but must do it in CWM instead.
so, Im stuck in a boot loop, with a original rom with no CWM and although the computer recognizes the phone as a huawei and loads the ADB drivers etc... Ive got no way to flash a rom with CWM to get me to cyanogen at all.. SUT doesn't recognize the phone at all..
so ive got the roms i need and even tried with android AIO flasher ...
clearly i need some help ...
can you assist?.. thanks..
The same problem
I got the same problem... I "played" with the ROM Toolbox app (changed boot animation, changed status bar icons, changed the SYSTEM UI), and now I got the same problem... Can anyone help us plz.?
[Q] Lenovo S90C - Bricked - Need Help
Hello !
I have Lenovo S90C (fake obviously) MTK6582 Octa Core 4G RAM (or so it was said on AliExpress. I just recently discovered that's not true) DoubleSIM and almost none of ROM (I could only install about 5 apps. I couldn't even make backup with MtkDroidTools etc. and modify the EBR Files, because there's not enough space for backup, it didn't work even if I tried with SD card).
Then I found a ROM on the internet where it was written in the comments that it suits my smart phone. So I tried to flash it on with SP FlashTool. And now my phone is bricked. At first it showed some coloured stripes and vibrated at the startup, but it never booted. I couldn't even get it to the recovery mode.
To this point, computer recognized the phone when it was connected. So I tried to flash a ROM again. From this attempt on, it doesn't work at all. It's totally bricked. I can not turn it on, go to the recovery mode, enter boot menu, nothing. Even computer doesn't recognize it.
Link to ROM I tried: needrom.com/download/alps-k500/
Link to phone I bought: aliexpress.com/snapshot/6662334714.html?orderId=67204220302389
So my question is; could you guys help me with getting the right ROM, with sufficient amount of internal storage.. I would also be grateful if you would help me with un-bricking the phone. I can't even get to the kernel boot menu, computer won't recognize it even with all the drivers installed and that concerns me a lot.
I would need it ASAP. Thank you all! :good:
I think you need a YunOS rom
Hi
I need your help. I was tinkering around with a Micromax 121/Cherry Mobile Omega Icon. Some how i tried to boot it to TWRP by using the Flashify , but somehow i got into a bootloop. Now its not booting up. I tried to clear all data and reset but it was not working as well. Tried to wipe data (this one i think i made a big mistake). and now its stuck on the logo. I can access the recovery mode but its seems that i'm dead end.
Any of you guys can give me any idea on how to fix this ??
PS : The USB is not working also so i cannot connect it to my computer. I'm trying to find a fix just by using a SD card.
Thanks
you solved the problem?? im in the similar situation and dont know what to do :'(