Dear Sirs!
I have read the similar topics, but it does not apply, since people at least get 2G data.
My carrier uses 900 Mhz (only) for their 3G - is there any way at all to make that work on the Omate smartwatch?
Their Edge is also on 900 or 850 Mhz, and even that is not working (no E icon shows ever, with full signal).
When I tap the option Access Point Names I only get blank screen.
My watch is the new EU edition, I only got it now, but without data it is useless
I would really appreciate some help!
Kind regards.
One part solved...
Apparently the blank screen for APN was hiding the menu accessible only with swiping.
So now I do have the Edge connection.
I still wonder - is there any app or a way to enable 3G via 900mhz on this watch?
I am still non-rooted btw.
Related
With Use "2G Only" checked I get NO data. I've been googling and testing for 4 hours.
When I uncheck "2G Only" it switches to 3g and I get data. If the 3g signal is bad it will switch to E and I will get data and if I move near the window and the signal gets better it will switch back to H. So I know Edge works fine and is in this area.
At the same location, if I check 2G Only, I get no data. Voice is fine.
I went into *#*#4636 Info and when GSM Only is selected, I press Menu, and it shows Enable Data connection but when I select it, it does nothing. The menu disappears but it acts like nothing happened.
When I boot Windows Mobile 6.5 Edge and 3G work fine.
I have to get 2G only working because the 3g is random in my condo.
FYI, I can't get MMS sending to work either. I tried port 8080, I tried with username and without, with and without passwords, with APN type and without too.
I've had the same problem on builds that have a 3g only choice (wcdma). When selecting, I get no signal, otherwise it was fine. I wonder what that is messing with.
nrfitchett4 said:
I've had the same problem on builds that have a 3g only choice (wcdma). When selecting, I get no signal, otherwise it was fine. I wonder what that is messing with.
Click to expand...
Click to collapse
I have the same issue too
What network are you on? TMobile I assume since you talk about Edge and GSM.
Edge is 2.75G in essence. TMobile does not have a distinct 2G signal, at least not that I am aware of. It goes G (no data), E (Edge 2.75G), 3G, and H.
So by choosing 2G only, you eliminate even E...therefore no Data.
J
I'm on AT&T with a Telstra phone that has 850Mhz data.
If 2.75G is Edge and HAS data, how do I select it from the *#*#4636 or from some other menu?
On Windows Mobile 6.5, when I select GSM only I still get EDGE for data. So I can have a reliable voice call and when I'm not talking I can have Edge data.
In settings, about phone, status what does it say for you guys on three uk under mobile network type.
Mine would say HSPDA regardless of being on 3g or H, now though it constantly displays UMTS
Is that normal? Is it because I've flashed a custom rom?
And also I've noticed my data connection changes often from 3g to H.
Lastly in network mode do you guys have it on auto or WCDMA only.
Thanks
Well it will switch to 3g(umts) when there isn't anybdata being sent/received. When you need data it switches to h(hspa) so you get the fastest speeds.
This is to save battery life, so when you check in settings your probably not pulling data.
Try downloading something then looking.
Sent from Samsung Galaxy S2 on TELUS.
Thanks for the helpful reply.
Another thing though, would it benefit me switching to wcdma only instead of auto,?
Good day team. Does anybody here knows how to overide connectivity setting for lumia 800 to just connect to a 3g network rather that the device automatically select the best signal strength. In my case i have the EDGE network stronger in signal in my area compared to 3g and as we all know data in edge is slow i would just like to know if you happen to stumble upon a settings to overide it.
Type ##3282#. Then via settings change to 3g only mode.
dredman0 said:
Type ##3282#. Then via settings change to 3g only mode.
Click to expand...
Click to collapse
Thanks a lot this greatly helps
any other way
any other way as it seems it doesn't works after windows update
Hi All,
I just got the international Z5c, model E5823, which supports both tmo us LTE bands in my area (bands 1 and 12). When I have preferred network type set to 3G, I get more bars and have data connectivity. When I switch it to 4G, the bars go down to 1 or 2, and I get no data.
I did a logcat while switching from 3G to 4G and noticed that while switching, the icon switches between H+ and H, then eventually drops out. I'm still trying to see if there is anything useful in the logcat, but the one thing I noticed that seemed interesting was
Code:
D/StatusBar.NetworkController( 2598): updateIconSet, voice network type is: 13/LTE, data network type is: 13/LTE
To me, this looks like I might be seeing issues with some failed attempt to use voice over lte (as this phone supports it).
Regardless, does anyone know how I can disable voice over LTE? There was an option in the phone menu on the Z3 supposedly that would let you toggle, but I don't see it anywhere on this.
I'm going to be cross posting this in the sony forums as well, so if I hear back I'll post here.
Fixed it. I turned it onto 3g and selected "Internet settings" from the networking menu, which seems to have downloaded some configuration stuff from my carrier. After switching back to 4g I have fully working data.
My Moto E always seem to prefer using 2G even if I have selected 3G as prefered. It is very annoying as I want to use data over 3G but can never switch to 3G.
On my Samsung Tab 2, my ROM gives me option to explicitly use 3G network(not prefered) but there I have another annoyance that it prefers UMTS or HSPA. Unfortunately, my area only serves data on HSPAP. How to latch on H+ only?
I tried going to the *#*#301279#*#* menu and clicked on HSDPA only. But nothing happens still on EDGE/UTMS in both cases.