Hi guys, i've tried everything but my razr doesn't go in deep sleep mode. I tried to install deep sleep battery saver but it doesn't work, i also tried to restore my phone to the factory mode but it still keeps going on 1000 mHz. I've safestrap with in the first slot ICS stock and in the second one cm 11 with the jbx kernel. Can you help me?
Thank you
Related
hi
install latest Epinter JB rom. applied the bluesleep.fix.
after a while the phone finally goes into deep sleep mode (which was never done before)
after some time in deep sleep mode the phone just turns off and require battery removal and turning on again
does anyone came up with this problem ?
when the rom is installed clean with no bluesleep fix it works fine
thanks
I'm still on the ICS kernal and am using the Icarus HD Rom. What happens from time to time is that the phone will go into a deep sleep but wont wake up until i do a soft reboot. When it does reboot the screen will always say Android is upgrading. This has happend on other Roms that i've installed........can anyone suggest anything ? Thanks for your help
I recently installed Dirty Unicorns along with JBX 0.8 Hybrid kernel in system 2 using BMM on a GSM XT910. I've installed the kernel before, but I've never had it replace the motorola boot image before getting to recovery with the JBX logo. Can anybody tell me why that boot logo before recovery would have changed and how I'd go about changing it back?
Furthermore, there seems to be a discrepancy between battery stats on DU and the stock rom. For example, today the stock rom says the battery is at 30 % which is consistent to what the battery level was according to BMM (3%). When I booted into DU it said it was at 49%. I've tried wiping the battery stats, but I imagine it'll be a while before I know if this solves the problem. Has anyone else experienced this before?
Lastly, my phone doesn't seem to go into deep sleep. I'm new to trickster mod and don't have much experience with fiddling around with the kernel. My phone seemed to be doing very well, it was at 100% charge for five hours but then it rebooted itself and the cpu was constantly running at 1000 MHz which is the max value I set. At the time I was using Performance Control, and thought that might be the issue. I performed a wipe, reflashed, installed trickster mod and set up battery friend but my phone hasn't gone into deep sleep at all. What might I be doing wrong?
Edit: I probably should have added that the boot image is a problem to the thread title. If any mod wants to do that, I'd be grateful.
Just an update, the battery issues seem to be resolved with the battery friend majigger and wiping the battery stats. Although, I have the orange led for full battery but the level is at 76%. :/
Still don't understand the boot image, if anyone can explain.
I did the same thing and it freaked me out for a bit After searching I found the logo for the new Moto/Google logo and it also included the Original Logo. Downloaded the newer logo and the old logo, and I replaced the new logo with the old/original logo in the setup folder on my computer. Let the program do its thing, and I now have the original Moto logo back.
This is all explained at http://forum.xda-developers.com/showthread.php?t=2340961
Good Luck. I just followed the directions there. The Original logo download is just below the RSD lite screenshot.
Not long after I enabled the power saving mode on my S2 the device suddenly shutdown (while in my pocket, battery around 60% full) and couldn't turn on again. After 2 days the S2 suddenly booted again but still won't start up all the time when I want to.
My S2 device never had this issue before (I know it is a well known issue but apparently it should have been fixed in JB?)
Software I use:
- Apolo 4.12 kernel (Regular)
- Neatrom Lite
I am thinking of either hardware starting to fail or maybe the Apolo kernel has a bug that was triggered by enabling the powersafe mode?
I am not sure, anyone that can help/advise me?
It's probably a software issue, JB has tons of bugs. What kinda advise do you want? You need to re-install the rom (and clear cache ofc) and if that doesn't work re-install the stock rom via odin and then install neatrom if you want. And just don't use power save mode until you get an update? It's useless anyway... You can also try another kernel, this seems like a kernel problem.
Power saving actually just have a few advantages like turning of un-needed things like haptic feedback and some other stuff which you could do manually, and the main power saving feature is that it limits the CPU to use only 800Mhz max, this might be having some issues with Apollo kernel (as it works fine with stock or stock based kernel like Philz), but Apollo is a powerful kernel and will let you manually adjust the CPU limits even at your preferred limits manually, so if you want to save battery just manually adjust the settings instead of using Power Saving mode.
Sent from my GT-I9100 using Tapatalk
Perphide said:
Not long after I enabled the power saving mode on my S2 the device suddenly shutdown (while in my pocket, battery around 60% full) and couldn't turn on again. After 2 days the S2 suddenly booted again but still won't start up all the time when I want to.
My S2 device never had this issue before (I know it is a well known issue but apparently it should have been fixed in JB?)
Software I use:
- Apolo 4.12 kernel (Regular)
- Neatrom Lite
I am thinking of either hardware starting to fail or maybe the Apolo kernel has a bug that was triggered by enabling the powersafe mode?
I am not sure, anyone that can help/advise me?
Click to expand...
Click to collapse
It may be a bug in that rom. try another rom
Thank you!
Thank all of you for the help and advise!
I will no longer use the powersafe feature and start using the Apolo kernel again, since that kernel gave me the best battery life.
It might have been a coincidence of course that my S2 died/didn't want to start up no more shortly after using the powersafe feature... however from all of the above advise it seems that I don't need that feature anyway so I feel safe to switch back to the Apolo kernel again with my new installed NeatROM SuperLite 2.4.
If the problem returns I'll be here to post it, it might still be a bug in the Apolo kernel of the NeatROM ... I am not sure. Time will tell, or not if it had to do with the powersafe feature which I won't be using any more.
Thank you all!
Hi all after I updated to Lollipop on the ZU , i just cant get my phone to go to deep sleep with even flight mode , the cpu is at constant 300+Mhz , even with master factory reset , reflashing whole ftf , now the problem is even if i go back to kitkat ftf still cpu is not sleeping ... any ideas ? what may be the problem ? is my cpu faulty ?
Same problem here, currently looking at the phone app wakelock.. anyone know how to cure it?
This was the battery stat from 100% in supposed sleep.