i am trying to install cyanofgenmod rom on shostock 3 and i keep getting an error message status 7
could anyone help me please
thanks
Shostock3 does not use an appropriate kernel/recovery to flash any android 4.4 firmware.
see this post for details on using an appropriate kernel/recovery.
derbo_1 said:
i am trying to install cyanofgenmod rom on shostock 3 and i keep getting an error message status 7
could anyone help me please
thanks
Click to expand...
Click to collapse
derbo_1 said:
i am trying to install cyanofgenmod rom on shostock 3 and i keep getting an error message status 7
could anyone help me please
thanks
Click to expand...
Click to collapse
It means your recovery needs to be updated. If you're wanting CM11 you would need to flash RenderBroken's kernel. If it's CM10 you would need AJK 4.9 AOSP.
Flashing one of these version-specific kernels will give you the recovery you need.
EDIT: SteveMurphy's response covers it better.
Related
I have an Atrix 4G, rooted/bootloader unlocked, running Ba2TF (CM7.1) right now, but when I try to flash any ROMs even based on Blur, it doesn't work. CWM recovery gives me an error when I try flashing. Any ideas how to flash a Blurred/Stockish ROM?
Maybe you can tell us which error are you getting when trying to flash a Blur rom...
djluis48 said:
Maybe you can tell us which error are you getting when trying to flash a Blur rom...
Click to expand...
Click to collapse
Good idea I'll try flashing and post the specific error.
Also, which ROMs are you specifically trying to flash and what recovery are you using and where are you placing the zip file to flash from and are you performing the appropriate wipes and and and ..... ???
Just for future reference, please give as much details as possible to make it easier for anyone trying to help to diagnose the issue.
darnocs1 said:
Good idea I'll try flashing and post the specific error.
Click to expand...
Click to collapse
live4nyy said:
Also, which ROMs are you specifically trying to flash and what recovery are you using and where are you placing the zip file to flash from and are you performing the appropriate wipes and and and ..... ???
Just for future reference, please give as much details as possible to make it easier for anyone trying to help to diagnose the issue.
Click to expand...
Click to collapse
ROM: GingerMod 2.3.6 #7
Recovery: CWM (as stated in the OP) 5.0.0.*
Zip: Root of SD card
Everything else: yep, I've flashed a ton of ROMs on this phone. This specific one (GingerMod) is the only one that's given me problems.
I hav been using lion rom based on jellybean bt now when I try to flash a new rom it says status 7
Thanks for sharing.
Sent from the Matrix
awes.pathan said:
I hav been using lion rom based on jellybean bt now when I try to flash a new rom it says status 7
Click to expand...
Click to collapse
Please try and use some common sense and USE SEARCH BUTTON!!!!
This has already been discussed on various occasions.
awes.pathan said:
I hav been using lion rom based on jellybean bt now when I try to flash a new rom it says status 7
Click to expand...
Click to collapse
Pretty sure md5 mismatch.
Status 7 means you're trying to apply a ROM that's not for your device.
I was experienced that error when I was trying to flash a random roms through cwm.
Try downloading the rom again or update CWM. You may also toogle signature verification in recovery, if you have that option.
At the end: you can flash the rom with Odin, just convert the zip to tar.
911-Future_Maker said:
Pretty sure md5 mismatch.
Status 7 means you're trying to apply a ROM that's not for your device.
I was experienced that error when I was trying to flash a random roms through cwm.
Try downloading the rom again or update CWM. You may also toogle signature verification in recovery, if you have that option.
At the end: you can flash the rom with Odin, just convert the zip to tar.
Click to expand...
Click to collapse
Please stop spoon feeding. This topic has already been discussed various times and answered various times so user should have searched. All you're doing is making it more likely they wont search again if they can simply create a topic and get answer.
Thread Closed:
As mentioned above, this info can be found with a quick search.
~ The-Captain
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
srchandran_72 said:
Hi,
Can anybody let me know on how to downgrade my GT-I9100G device from CM11 to CM10.2 ?.
I upgraded to CM11 unofficial build, but then found lots of bugs and so want to revert back to CM10.2
Thanks.
Click to expand...
Click to collapse
just flash the cm10.2 build if you've root n have installed cwm,
nasheich said:
just flash the cm10.2 build if you've root n have installed cwm,
Click to expand...
Click to collapse
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
srchandran_72 said:
Thanks, doesn't seem like it was so simple. I had tried that many a times before posting this on to the forum. When I try to install CM10.2 again through CWM, it errors out with (Status 7) error. I did a Wipe/Factory Data Reset, Wipe Dalvik Cache and format system. Tried again but the same error re-appeared (status 7).
So I had to reinstall CM11 and GAPPS for CM11 again to make the phone work with some old bugs again . Camera not working, lag in screen rotation, stock browser not working etc.,
Thanks
Click to expand...
Click to collapse
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
nasheich said:
status 7 it's cause there's something wrong on the updater script in the Rom build, check the Rom Thread that you've download
Click to expand...
Click to collapse
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
srchandran_72 said:
Thanks, not sure on what the issue with the Rom could be. I have rooted the device and then installed Blazing Kernel V3 with CWM 6.
Before I decided to upgrade my phone to experimental CM11, I used to apply all CM10.2 Nightlies without any issues.
I have tried to install even CM10.1 stable release through CWM v.6 and the same error comes up.
Further, I have always downloaded ROM's from download.cyanogenmod.org/?device=i9100g or through the CMupdater in the phone.
Can you please let me know, what version of Blazing Kernel should I using on GT-i9100G and how do I flash it safely without fearing of the "Sleep of death" happening.
Thank you.
Click to expand...
Click to collapse
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
nasheich said:
I never use Gallaxy SII, dont know much about it
but, you can learn about your device by going to the SII thread, you'll find out more on there
Click to expand...
Click to collapse
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
srchandran_72 said:
Thanks, can you please let me know the link to the GT-i1900G thread and also, on how can "post" a new question in the thread.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2
that should be the thread for your device
and for posting in a thread(speciallly in the dev thread), you must at least have more than 10 posting in whole xda thread
in general thread, you can post even you didn't have 10+ posting
please read the Rules of Xda for more detail about posting and everything
Hi.
Hope someone can help me, cannot find the answer anywhere myself
I am trying to flash the newest beta Dorimanx V10.43v62 but getting an error when flashing via CWM 6.0.4.5 - anyone know what I am missing?
Thanks
Husum182 said:
Hi.
Hope someone can help me, cannot find the answer anywhere myself
I am trying to flash the newest beta Dorimanx V10.43v62 but getting an error when flashing via CWM 6.0.4.5 - anyone know what I am missing?
Thanks
Click to expand...
Click to collapse
not sure dori kernel supports RR roms
Sent from my GT-I9100 using Tapatalk
sharp87 said:
not sure dori kernel supports RR roms
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Trying to re-download file now, see if it helps any.
I used Dori on the JB RR rom, and it worked fine - but you might be right that there is no KitKat support yet. Cant seem to find any definitive info on this? :/
Reason I want to change kernel is because battery life is not as good on the stock one that comes with RR KitKat.
sharp87 said:
not sure dori kernel supports RR roms
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Does not seem that I can get it working no matter what I try Maybe the CWM doesnt support flashing it or the RR KitKat rom just does not support other Kernels yet.
Anyone know if I am wasting my time trying to find custom kernel for RR KK4.4.2?
Husum182 said:
Hi.
Hope someone can help me, cannot find the answer anywhere myself
I am trying to flash the newest beta Dorimanx V10.43v62 but getting an error when flashing via CWM 6.0.4.5 - anyone know what I am missing?
Thanks
Click to expand...
Click to collapse
try this , i tested it on some roms
http://www.youtube.com/watch?v=NRVov2baCP8
also updating the cwm may solve the problem
good luck
Husum182 said:
Does not seem that I can get it working no matter what I try Maybe the CWM doesnt support flashing it or the RR KitKat rom just does not support other Kernels yet.
Anyone know if I am wasting my time trying to find custom kernel for RR KK4.4.2?
Click to expand...
Click to collapse
Hi. Having similar problems. Found post by Dorimanx on their Beta Kernel XDA site.
Hope it helps, please give me feedback thanks. As untested by myself at moment.
Also be aware script is Not exactly for RRKitKat 442 ROM.
But should help in problem solving?
Cheers bmad.
Link here: http://forum.xda-developers.com/showthread.php?t=2415759&page=532
Dorimanx version for RR 4.4.2 KK?
Barry Mad said:
Hi. Having similar problems. Found post by Dorimanx on their Beta Kernel XDA site.
Hope it helps, please give me feedback thanks. As untested by myself at moment.
Also be aware script is Not exactly for RRKitKat 442 ROM.
But should help in problem solving?
Cheers bmad.
Link here: http://forum.xda-developers.com/showthread.php?t=2415759&page=532
Click to expand...
Click to collapse
Hello guys,
I am facing the same problem i.e error Status 7 while trying to flash dorimanx on RR 4.4.2. CWM is KK compatible and tried several dorimanx v10.43 version but all give the same error.
I can see several people are using this combo of Rom and Kernel but wondering if there is a special way around it.
Any ideas?
Thanks,
follow this : http://forum.xda-developers.com/showthread.php?t=2546597 and try flashing the rom
hey,just got a samsung galaxy S5 g900T...Rooted it with "UPDATE-SuperSU-v2.79-20161211114519" And installed twrp-3.0.2-2-klte.Keep getting an error that says "Kernal is not Seandroid" I managed to install 1 or 2 roms,but they don't work right.wanted to try AllianceROM_V9,but it won't install,and bricks the phone.....What am i doing wrong? Do i have the wrong root? Thanks
bobbylo said:
hey,just got a samsung galaxy S5 g900T...Rooted it with "UPDATE-SuperSU-v2.79-20161211114519" And installed twrp-3.0.2-2-klte.Keep getting an error that says "Kernal is not Seandroid" I managed to install 1 or 2 roms,but they don't work right.wanted to try AllianceROM_V9,but it won't install,and bricks the phone.....What am i doing wrong? Do i have the wrong root? Thanks
Click to expand...
Click to collapse
go back to stock rom first using ODIN. Install TWRP 2.8.6, follow directions on Alliance Rom Page.
Right now i'm running RR-N-v5.8.0-20161222-klte-official...Its running good,ilthough i still get "Kernal is not Seandroid" during boot the rom is running really nice..Can you give a link for alliance rom page with the directions? Thank you
bobbylo said:
Right now i'm running RR-N-v5.8.0-20161222-klte-official...Its running good,ilthough i still get "Kernal is not Seandroid" during boot the rom is running really nice..Can you give a link for alliance rom page with the directions? Thank you
Click to expand...
Click to collapse
That message is normal and not an error.
OK,thanks....Is that from the knox counter?