Hi Guys, 1st post and I'm looking for help..
I have an Asus MeMo pad 10 ME302C, its totally soft bricked.
I was upgrading to 4.3 using WW_ME302C_V5_0_17.zip, all good no problems, then used the .de forums WW_ME302C-V5.0.18-0-ota-user.zip to root it also no problems, I then did the clean up and renamed build.prop when replacing it rather deleting it... Big mistake..
Now the device won't boot, it gets stuck at an ASUS screen with spinning circles. Trying to do factory reset also hangs at the spinning circles.
I've read and attempted many recovery methods described on XDA but am kinda screwed because the USB is not being recognised, seems to be no way to get it recognised so fastboot or ADB is out as I cannot talk to the device.
I do have an option to of SD download though but not sure what I would put on the SD and if I could get it to boot from it and recover that way.
So guys, help a brother out.. How do I recover this, can I put firmware on a SD card and recover this way?
Or is there a way to get the USB to be recognised by a pc, I have tried all drivers I can find and the Google SDK but nothing.
Or is there another avenue / idots giude to unbricking that I haven't found yet (ASUS forced reset?)
Really need help on this..
Cheers
ZBott
ZBott said:
Hi Guys, 1st post and I'm looking for help..
I have an Asus MeMo pad 10 ME302C, its totally soft bricked.
I was upgrading to 4.3 using WW_ME302C_V5_0_17.zip, all good no problems, then used the .de forums WW_ME302C-V5.0.18-0-ota-user.zip to root it also no problems, I then did the clean up and renamed build.prop when replacing it rather deleting it... Big mistake..
Now the device won't boot, it gets stuck at an ASUS screen with spinning circles. Trying to do factory reset also hangs at the spinning circles.
I've read and attempted many recovery methods described on XDA but am kinda screwed because the USB is not being recognised, seems to be no way to get it recognised so fastboot or ADB is out as I cannot talk to the device.
I do have an option to of SD download though but not sure what I would put on the SD and if I could get it to boot from it and recover that way.
So guys, help a brother out.. How do I recover this, can I put firmware on a SD card and recover this way?
Or is there a way to get the USB to be recognised by a pc, I have tried all drivers I can find and the Google SDK but nothing.
Or is there another avenue / idots giude to unbricking that I haven't found yet (ASUS forced reset?)
Really need help on this..
Cheers
ZBott
Click to expand...
Click to collapse
Try this link below. I was stuck for ages but this worked to get mine restored:
forum.xda-developers.com/showthread.php?t=2568724&page=46
Post number 460
Hope it helps.
Related
Hello, I just bought my G-tablet and I have severely screwed it over. First, I rooted it and installed CWM, (It went fine). Then I flashed Cyanogen 7, following their wiki full update instructions. It was running fine till I found out that for some reason, my computer nor the tablet even knew it had an SD (Computer found nothing, File explorer on tablet had nothing) coupled with the fact Gapps refused to install, I figured this would be solved in a wipe then another flash. Nothing was different. So I wiped again (seemed to have froze during) but the flash of Vegan 5.1 seemed to have went well... for now. However, trying to install Adobe Flash via the preinstalled android market, it wouldn't install. It kept saying download unsuccessful, for every single app I tried. (no it's not an network problem). Being the noob I am I started following random googled XDA threads on how to fix this. I partioned 4gig from my sd to see if that would fix the market problem. I got stuck in a bootloop so I was forced to reflash vegan. When I did, I found out that when I tried to install anything it said something along the lines of "Not enough space" knowing I had 13 gigs of memory leftover, I figured I'd try rebooting. Got stuck in bootloop. Then followed yet ANOTHER googled guide (droidpirate brick fix) and now I can't even access CWM. It just loads as IF it were going to CWM but then shows me a /!\ caution sign then instantly turns off. When I normally start it, it goes into bootloop. when I try to get to CWM (holding volume up, power) it goes to a useless flash that I presume just fails, then brings me back into the bootloop. As far as I see, I have no way of fixing this...
I know this is so much to read, so in a brief explanation.. I'm in a bootloop, cannot get into CWM (brings me to a failed flash then back into boot loop) and am in dire need of assistance Please help me
Go read the posts on nvflash and learn how to use it. It is your friend!!
IndyLateNite said:
Go read the posts on nvflash and learn how to use it. It is your friend!!
Click to expand...
Click to collapse
NvFlash is currently not working for me, I don't know exactly where I messed up but my computer already has the drivers to read the tablet. when I run the .bat, it doesn't seem to do anything.
Scratch that, got it to work. I didn't extract one of the folders entirely. But my tablet is still stuck in bootloop even after this? what now?
IndyLateNite said:
Go read the posts on nvflash and learn how to use it. It is your friend!!
Click to expand...
Click to collapse
Take this with a grain of salt, as I learned it is not 'always' your friend
Now it's just on the stock Viewsonic birds and Gtablet logo bootloop...
Even after I NvFlashed it... Still can't access CMW.
Any suggestions?
Nvm, I got it to what appears to be working. (and I just about jizzed all over my tab.) Thanks so much. Saved me a beating from my parents.
Hello, after playing with a tablet I got boot loop so below is solution for this.
This is what I wrote first:
I purchased Chinese tablet called CyberNav, there is link to the website with specs http://www.dracotek.com/cybernav-7-...ps-navigator-ultra-slim-wifi-8gb-gps70yw.html It works great and is worth the money. I received- on request- firmware for it, but it is with .img extension and I have no idea how to get to the files. Attached application PhoenixCard should install it on sd card but it does nothing. So there is my question- can anyone help me with it? Possibly root it? Or update to newer firmware version? I'll post a link to, just need to upload it to my dropbox on my next break at work.
Sek
im pretty sure you need a 3rd party application to flash that firmware, i think you load the .img file into the software on your pc, connect tablet in flash/recovery mode then flash it that way, dont know which software you would need to use though , sorry i cant help further
There is link to rar package http://db.tt/jm7eHfbq
If there is someone who wants to spend some time... Please help.
Bump
Some new infos:
As far I found out tablet is detectable during boot in adb, but it stays in boot loop. I think I've got right usb drivers.
I tried unyaffs the .img file using C:/unyaffs/unyaffs pw08.img but it shows file corrupted (might be wrong method?).
Logcat attached.
Maybe there is someone who will find what it's missing...
I see there is nobody who can help me, so... If some of u have similar problem with chinese tablet- bootloop, can't flash it with LiveSuit our update from sdcard, I found solution which worked for me. Using adb, pulled catalog /dev/data/ to hard disk, then deleted all dalvik cache, installed by me apps and almost every other file from /data on my hard disk. Then typed adb remount, then adb shell rm -r /dev/data/* to delete all data catalog on tablet. Then pushed /data catalog from my hard disk to tablet, and finally adb reboot. And it WORKS! Booting without problems. I wasted 4 days on research how to turn it in flash mode etc. But it was very simple.
Cheers
Sek
Hi, sek111
It was necessary to use the LiveSuite to flash through usb.
Thank you very much, from your post, I found the firmware for my tablet.
An experience with another low cost tablet with Bootloop
I happen to got my tab (Wammy from WickedLeak.org) stuck in BootLoop and was struggling to get a way out for the past 3 days, checking almost all of the posts for this issue!
The tab would stuck on the android loading animation despite running for 2-3 hours and after several hard reboots, it throw-ed following error-
Encryption Unsuccessful
encrytion was interupted and cant complete. as a result the data on your tablet is no longer accessible
to resume using your tablet, you must perform a factory reset. when you set up your tab after the reset, u'll hav an opportunity to restore any data that was backed up to ur google account
Click to expand...
Click to collapse
Despite going for the factory reset, it still didn't workout as the reset activity never completed or proceeded. I happen to be a beginner/noob and was trying my luck with possible solution but was comfortable with ADB stuff and workaround. Well i checked the solution which sek111 offered in this post and it was most closely helped me out. So i would like to Thank him a ton for sharing his solution.
Another method for few others if you don't get through the technical stuff and handling all the flashing tools, i was successful in bringing up the setting window of my tab and chose to do Reset via GUI which worked. Actually my battery got drained out to 7% and a popup message for same displayed while i was on the above error page. I selected the "check battery" option from that pop up and got my way out via factory "Backup and Reset" option under settings.
I hope this might help few people if not all! But the XDA forum is great and everyone will find a solution here. Cheers!!!
So I got this wm8850 chinese generic tablet. The camera is in the front in the middle (wide). It was shipped to me with 4.0.3 in boot loop. I soon found out that it boots into safe mode when I usb to pc. This is the furthest I've gotten with it so far. I can adb into it and have already tried to wipe data. It seems like since its from factory screwed up that a may need to reload the firmware or the os or something. Im kind of a noob because I only have my droid x. I've gotten it out of a boot loop before but I also knew what I had done to cause it so I fixed it. I tried to follow seks adb commands but im too noob to do it I guess. I was able to wipe data and dalvik-cache. Issue still occurs . If anybody can give me some adb commands than can help I would greatly appreciate it. Im fairly sure that I found the firmware elsewhere on xda. I thank you guys for any help at all you can give. I don't wanna send it back without trying everything software related as I can, but ill send it back if I can't fix it or if I brick it
Sent from my DROIDX using xda app-developers app
i have same problem in my china mobile.. dupad k1 ... after in installed new boot screen, device stuck in boot... please help to recover my device in step by step....
I have been reading everything I can find and tried to figure it out myself but the more I read the more questions I have and the less sure I am about trying any of the things I have read.
My problem is with an lg tribute from the company called Textnow. My friend ordered the phone from them and was having some issue she decided to try to fix by doing a factory reset which caused it to be stuck on the Lg boot logo. I tried booting to recovery to fix it. The recovery was TWRP. I was under the impression that Twrp was a custom recovery program that was installed after unlocking boot loader. Best I can tell is the phone was already rooted by the company. Does this sound right?
I messed with it for while but couldn't get anywhere with it because I haven't any knowledge of rooting except what I read . I noticed it kept saying something about simulating actions and figured that out but now after trying to back up and restore and poking around that it says there is no os , I was hoping someone could help me figure out where to go from here as it isn't my phone and I would hate to damage it although my friend keeps telling me to just try whatever no big loss because she can't use it like it is so.
I am not sure what the phone had for firmware because I cant get it on. I only know that it had twrp 2.8.5.0 as recover not the usual android. I can access the phone internal and external through twrp and though pc and adb. I made sure to get drivers updated. I tried to flash the stock rom from its forum but it failed,. any info would be mush appreciated
Hello guys,
My phone hard bricked when I was trying to install a factory room, I accidentally moved all my files including system to my sd card and after that I was unable to start my cellphone and when I tried to reinstall the room something went wrong and now I can't access the download screen.
I want to know if there's anyway to solve this without a jig.
I saw this post and I think it can be the answer but it seems that no one has ever made a brick recovery image to the model of my cellphone.
http://forum.xda-developers.com/showthread.php?t=2660566
Thanks for the attention!
Well i have a issue. after a fail flash. odin just get stuck at the preloader.img . tried a lot of versions of odin. non of help. even on win 10 or win 7. don't what to do...
Our device is fairly new, I doubt you will find extensive tutorials. I would give it probably a year (Nov 2017)
Exactly the same happened to me right now.
I was flashing SM-G532MUBU1APIG_CL9364647 and after Odin said PASS!
It won't do absolutely anything.
Did anyone manage to make the debrick.img?
Greetings xda!
I came across the forum after searching the internet trying to fix my problem. I appreciate the advice in advance!
I have a Gigaset QV830 android tablet. I have had it about a year. or so A few days ago it started unexpectedly crashing/rebooting while browsing facebook and using firefox. It would start right back up until today when it finally got stuck rebooting at the Gigaset start screen. I let it sit for a few hours and nothing happened.
I was able to boot into Recovery mode, and I attempted to wipe the cache partition in hopes that I could reboot the tablet, save my data, and then hard reset. Unfortunately since I did this, I have been stuck in the android bot loading screen for hours now. Since I am a new user I can't post a link to the picture but it is the android bot with his front compartment open and a blue spherical structure spinning and a loading bar moving above it.
Now I cannot enter recovery mode to do a factory reset and my computer won't recognize my tablet. I am stuck and frustrated and am not sure what to do next. I plan on leaving my tablet plugged in over night with the hopes that the android bot loading screen will work itself out but I doubt that will happen.
I didn't do anything to modify my tablet in any way (all factory OS, just installed apps etc).
Any ideas on possible next steps? Disclaimer: I don't know much about android development but am open to learning/trying anything to fix this.
Thanks a lot for your help. :good:
I have tried a few things with no luck. Here is a bit of an update:
I installed Smart Phone Flash Tool, and the necessary drivers. I found two separate copies of my QV830 files to flash the system. I cannot flash my android with either of the system.img files. It gets stuck between 13-15% with the error message: ERROR: S_FT_DOWNLOAD_FAIL (0xFA8). Everything else will flash just fine with no errors (the boot file, logo, recovery etc).
I played around with a few other things. I found that if I tried to format or choose the firmware upgrade option, while they don't run successfully, they do seem to stop the android bot looping screen. After using these options, the tablet is unable to start whatsoever but after downloading the files to the tablet through the Smart Phone Flash Tool (again, all but system.img), I am able to start the tablet up and instead of getting stuck at the android bot screen, I get stuck at the Gigaset screen.
The good news is that I am able to enter system recovery now. The new problem is that when I try to wipe data/factory reset, the tablet gets stuck on the android bot screen and gets stuck saying --Wiping data..., Formatting /data... This once again when I reboot, gets me stuck at the android bot screen with the loading bar.
AHHH!! Ideas? Appreciate it!
EDIT: I also do have another, one of the Gigaset QV830 tablets that is working if that could be of any help to me.
Ok so I know its kind of late, and I'm new here, but I was having the same problem with the same tablet, and I wanted to know if I could follow the same steps that you did to revive your tablet. So could you please give me the QV830 file links so I could figure out how to use the flash tool to bring my tablet back to life? Thanks in advance.?
I did an oof!!!
I made an attempt to flash a ROM on my Quanta Gigaset QV830 tablet. It was the SDK and Fastboot ROM from Magisk Manager. That stupid decision may have soft-bricked my device, thus making it inoperable, yet repairable. I do not have a computer that will be of any help at the moment, as the only laptop I have is an Asus Chromebook C202SA under jurisdiction of a school district using Enterprise Origin, unless, of course, the repair simply involves downloading and unzipping a few files to an SD card.
My Quanta Gigaset QV830 tablet will not be read by a computer via USB, it will not boot into Recovery Mode, or Fastboot Mode, and it will not leave it's state of being in a constant bootloop. Please help me, as I have run out of ideas, and I cannot afford to get it fixed.:crying::crying::crying::crying::crying: