Good night.
I have had very bad luck with phones, you can not imagine ... My problem is that my Galaxy SII is bricked, I can not enter into recovery mode but I can enter into download mode normally.
As you can imagine, my PC does not recognize the device so I had to install the drivers using Samsung KIES, after Odin was able to recognize my device, the thing is I tried to install several stock rom and I could not because I Odin mark "operation failed".
Below I leave a screenshot of what appears in ODIN I try to install any rom either multiple files and a single file.
I hope you can help me with my problem, greetings from Venezuela.
Same as everyone else in this situation; find Hopper8's 'Odin troubleshooting' thread stickied in General & go through all the troubleshooting steps in a methodical manner as many times as you need to in order to get a successful flash.
That thread is 'the bible' as it covers these situations from every possible angle. Where these are recoverable (and almost all are as long as you have download mode), they're often fixed with perseverance, so you may need to try one or more of the steps in the thread many times to get a fix.
Thanks!, but... where I can find that? I'm new to this, and believe me I have not had any luck, right now I also hurt my mini s3 not enciente or cargo or enter download mode or recovery mode.
Not interested in your other device, it has a specific forum, and you'll need to post a thread to that forum to get help with it. That's how things work around here, specific forums for specific devices as what works for one device doesn't necessarily work for another
And with regard to how to find that thread, navigate to the General section, and it's a stickied thread which means it's on the first page.
If you want your phone fixed, it's going to take a bit of effort on your part, and using menus to navigate to different parts of the site is something you're going to have to do (we have stickied threads so we don't have to constantly repost common stuff). Go to the root of Samsung Galaxy S II I9100 & it will list the different sections, you'll see the General section listed there.
Related
sorry if i didnt post in right subject
I have been playing with beta 2.2 when i connect x10 to computer to upload some staff to Sd i accidently turn on Pc compansion My computer get blue screen i can not read becouse it gone very quckly!
Now my windows does not start normaly Welcome instead of start i get New update is avaible in pcc no matter when phone is turned on or off to USB
When i turned on to USb it crash with blue screen when I dont do anything like touch or connceting usb x10 connecting and download initiated reboot it self in loop
0x84d9
0x81
0x400
0X0000007A
0xc000000E
0xc000000E
0x00000â€
0x0B862000
and few others
I really dont want to format it
I using my uncle computer!
by the way
spec
vista 64bit
6gb ram
2.5 tb in hard drive in raid 5
2x radeon 5800 crossfire
asus rampage
i7 870
watercoooled
last drivers
can you help me
cheers
marcoplo said:
sorry if i didnt post in right subject
Click to expand...
Click to collapse
For future reference ...
-PiLoT- said:
Post What Where:
General - general technical discussion items, news, anything else that does not fit into the other fora categories.
Q&A (Questions and Answers) - all questions, irrespective of type, get posted in here whether they be theme related, accessory related, technical, etc.
Accessories - any items to do with components and/or accessories relating to your device.
Rom Development - only meant for very advanced technical discussion directly related to ROM development activity and the delivery of actual ROMs and ROM components ONLY. Nothing else goes in here.
Themes & Apps - anything to do directly with the development of themes and/or applications. Nothing else goes in here.
MOD EDIT: BEFORE POSTING ANY THREAD IN THE DEVELOPMENT SECTION, PLEASE READ THE FOLLOWING:
If you have developed a ROM, or are working with others to do so, the development forum is somewhere to discuss and share ideas, post useful feedback and logs or crash dumps, and to discuss a common goal developers are trying to achieve.
It is NOT the place to post your question because it gets higher traffic, or because more experienced users frequent it. Doing this just annoys those who are working on the device, and drives them away. Developers don't want to wade through 20 threads of "Help me urgently" to find their threads for porting and fixing camera issues etc. Similarly, if a thread is designated as discussion for developers say, porting a camera fix, please do not post in there asking "When will it be ready?", "Can I flash this yet?" etc. This is both completely disrespectful to those working on the project (you evidently haven't read the important posts in the thread), and also is making it harder for developers to find comments from other developers or testers when required.
Similarly, don't make loads of "Thanks for your work here" posts in an active development thread. It's just as annoying to developers as asking when something will be ready. If a ROM is complete, then go ahead and thank the developer if you wish, but don't go into threads for devs only, and interrupt it to post "thanks". It's basically spamming, and is treated as such.
If you are posting in development, you should have read every sticky and notice there, and should be actively developing or helping in the development of something. Developing isn't installing a ROM, or using a tweak, it's creating a ROM or other hack or tweak. If you haven't read for several days before starting out on XDA, you are likely about to ask something already solved. I registered on XDA when I first wanted to post, and that was to join in a discussion on something. Sure, join up and ask a question, but read the information available in General and Q&A first, as your question will have been asked before. Search is your friend here, become familiar with it.
Regarding when to post in development if you are not actually developing something, there is one occasion where it's acceptable. If you find a leak of a new ROM, which isn't already posted, and you verify it's legitimacy via either running it, or based on the source you obtained it from, then this is assisting in development, and should be posted in development. If you want to ask when a leak will be available use search first, then if not already in discussion, open a thread in general or Q&A.
If you have a problem flashing a ROM, this is NOT related to development. It's up to you to determine if it is specific to a particular ROM, and post useful information in that developer's existing thread for the ROM. If it happens on more than one ROM, and isn't a known issue (remember you should read several times more words than you post), then find out what you are doing wrong. Check guides written by others, try to repeat the problem and see if it happens every time. Something needs to be reproducible to be fixed effectively.
Once you have identified what you need help with go to the device Q&A forum (general if device lacks one), and make a clear, informative thread that explains the issue, and what you have tried doing to fix it. Did you re-download the ROM? Did you ask a friend to flash it for you, to reduce chance of user error? What steps (exactly) did you follow? What errors did you see (exact wording)? Did you double check all the steps? Did you do a wipe or hard reset?
If you make a clear, concise, yet detailed post, you will find help forthcoming, and should get the problem sorted very quickly. If someone suggests you try something, report back on what happened, did it work etc. Then, next time someone has this issue and searches, they will find this and have a verified and tested solution.
So remember... before you start a thread in development, ask yourself what you are developing. If you can't answer, then stop, step away from the post button, and think about where you are posting. Would it be better in General or Q&A, or is some more time with your best friend, search, required?
Click to expand...
Click to collapse
Uninstalling PCC would seem the obvious way forward.
marcoplo said:
Now my windows does not start normaly Welcome instead of start i get New update is avaible in pcc no matter when phone is turned on or off to USB
When i turned on to USb it crash with blue screen when I dont do anything like touch or connceting usb x10 connecting and download initiated reboot it self in loop
Click to expand...
Click to collapse
I didn't get this part.
Could you please rewrite what is happening?
I read: "I can't boot into Windows, but PC Companion keeps crashing my rig." --> Makes no sense to me
menu start does not show up
instead of menu i got PCC new update always
no matter if plug in usb with mobile
when i pluging usb i get blue screen
when dont plug in usb downloading some thing reboot
loop
how can i uniinstall if i can not access to panel contol or even menu start
Tried starting in safe mode? If you can, uninstall pc companion
Sent from my es209ra using XDA App
I manage to uniinstall PCC but computer seem to not recognised any usb devices now
Try going to device management and reinstalling the usb devices. (config-system-hardware)
Reinstall windows its the best option. Sry mate but it seems that ur vista is raped
Sent from my X10i using XDA App
I like bluescreens
Are you able to open the task manager?
Sent from my AOSP on Xperia (US) using XDA App
boot into safe mode and make system restore the system always make restore points with out your promision so you can restore to some old day that would solve your problem
Sent from my X10i using the XDA mobile application powered by Tapatalk
Naaa... There is no need do reinstall Windows
Never.
In this case, S///E screw up your USB Host Drivers.
They replace them for S///Es own USB-Filter-Drivers.
Go to the devicemanager, right-click the USB-Hosts/Hubs ---> settings ---> driver.
I'm pretty sure, there are S///E drivers instead of the Microsoft ones.
Hi I am trying to fix a friends s2, its all stock and no root. Odin doesnt seem to want to flash the md5 files, either says nand write and stops or stay at BOOT stage.
any ideas muchly appreciated
Been covered so many times I've lost count this week (the 'Odin won't work' thing; search for similar threads). If you have recovery (I assume you probably don't, but, anyways), do a factory reset/wipe. And if not search for those threads as per the first sentence (CBA retyping the troubleshooting steps out given they've been regurgitated here thousands of times already).
Edit - You haven't exactly provided a great deal of info either, but as I'm not posting to this thread again, I'm not fussed if you provide more info or not.
MistahBungle said:
Been covered so many times I've lost count this week (the 'Odin won't work' thing; search for similar threads). If you have recovery (I assume you probably don't, but, anyways), do a factory reset/wipe. And if not search for those threads as per the first sentence (CBA retyping the troubleshooting steps out given they've been regurgitated here thousands of times already).
Edit - You haven't exactly provided a great deal of info either, but as I'm not posting to this thread again, I'm not fussed if you provide more info or not.
Click to expand...
Click to collapse
there is no recovery as its not been rooted/flashed in any way.
You can get in to download mode and thats it. What further info do you want, its on o2 in the uk
Andyokane said:
there is no recovery as its not been rooted/flashed in any way.
You can get in to download mode and thats it. What further info do you want, its on o2 in the uk
Click to expand...
Click to collapse
oh and I HAVE been searching the threads I post on here all the time and know how to use the forum, All the guides say get in to recovery (which I cant do) If I could i'd be laughing
Andyokane said:
oh and I HAVE been searching the threads I post on here all the time and know how to use the forum, All the guides say get in to recovery (which I cant do) If I could i'd be laughing
Click to expand...
Click to collapse
seriously searched my balls off now and still cant find a solution... had faith in you lot
No lying allowed!
Sent from the little guy
Andyokane said:
had faith in you lot
Click to expand...
Click to collapse
All you get on here now is spamming and stupid pics getting posted now.....
Damn, you're starting to imagining things.
Get it together.
Sent from the little guy
theunderling said:
All you get on here now is spamming and stupid pics getting posted now.....
Click to expand...
Click to collapse
tell me about it mate. That and pointless replies ^
- its amazing how each section of xda differs too, I use the s3, s4 hox, kindle, and htc one and its a nice place to be. Instant responses and friendly natured
Right. This is the final time I'm posting these steps ever (I'm deleting the txt file I have them stored in on my PC, so anyone who wants to make a copy of these steps, do it now) on here:-
Flash/Odin doesn't work blurb -
*Must run Odin as administrator in Windoze.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again.
*Turn off antivirus/antispyware/antimalware.
*Check the rom/kernel you download for corruption. Either check the MD5 sum if you have it (use md5summer or similar), if you don't have the md5 sum or can't check it, programs like 7Zip, IZarc, WinRar, etc will allow you to 'test' the rom file you download. If there are any errors/any of the files fail the test, bad download. Try again/try downloading with a different internet connection if it keeps happening.
*Run Windoze Update.
*And if all these steps fail, try a different PC. And if it won't work first go on a 2nd PC, go thru the above steps on that PC. Still doesn't work ? User error (will be almost impossible to say what given we're not there looking over your shoulder, almost always something very obvious being missed) or borked phone - return to service centre or local mobile shop.
I suspect many cases where people (say) they do all the above & still can't get it to work involve problems with the USB ports on the machines they're using. Something along the lines of the port is unable to maintain a constant connection between PC & phone; if that connection drops for even a millisecond (probably not even long enough to be registered as a broken connection by the PC in the normal way), you end up with a constantly failing flash at best and a bad flash which borks your phone at worst.
Obviously the only way I'd be able to test the theory would be to examine/test a bunch of PC's belonging to people who experience this issue, but I've given this issue a lot of thought over the past 18 mths & it's the best explanation I've got for those instances where people are being completely honest about having tried all the steps over & over and on multiple machines (a very very small % of people, most people either simply don't do every step over & over and say they do, or they forget they've forgotten they did A, B & C but not F) & still find they can't flash successfully (and it isn't a case of the phone being borked).
MistahBungle said:
Right. This is the final time I'm posting these steps ever (I'm deleting the txt file I have them stored in on my PC, so anyone who wants to make a copy of these steps, do it now) on here:-
Click to expand...
Click to collapse
@MistahBungle:
Do you mind if these steps are re-posted, if its said that originally you posted them?
Knock yourself out. Copy, publish, repost & plaster as widely as you like
Edit - I actually saw a similar list initially posted by JJEgan ages ago (>1 yr), and then added some things to it, so he deserves ultimate credit.
MistahBungle said:
Knock yourself out. Copy, publish, repost & plaster as widely as you like
Edit - I actually saw a similar list initially posted by JJEgan ages ago (>1 yr), and then added some things to it, so he deserves ultimate credit.
Click to expand...
Click to collapse
Will do. Once I finished re-posting it (possibly soon at the given rate of 'my flash didnt work plz help' posts), someone else may take it on, as you did from JJEgan. I haven't been around for a year, but if I see his posts I will thank him
tried all that apart from the different computer tip. Will try it tonight at work and report back.
Hi everyone, new here and a complete noob hopefully i'm posting in the right place and i don't sound too thick.
A colleague of mine has the S2 and it seems as if the OS is corrupted. The phone boots but on the home screen she is bombarded with continuous messages about a process failing and having to stop.
There is a whole load of photos on the phone she would like to retrieve which leads me into the second issue, despite the fact the phone will charge, USB connectivity to the computer is not working and saying the device is not recognized. i have installed Kies as well as the MTP driver to no sucess. More over the phone via USB keeps on disconnecting/reconnecting every few seconds.
All this leads me to my questions
Would it be possible to re-flash the stock firmware via an SD card in recovery or odin mode?
Would doing so (if possible & successful) keep the pictures or will this be erased?
Open to suggestions anyone may have and thanks in advance.
Yes, try flashing a stock rom with Odin first in download mode. No, flashing a one part firmware will not erase her stuff normally, though I'm not the type of person to give 100% guarantees on anything phone-related.
Sounds like a dodgy USB board/port which is on the way out will probably make it hard to do an Odin flash of stock though. What you've described definitely sounds like it's on the fritz. If you can't get a successful stock flash after trying absolutely everything & those USB issues persist/seem to be the problem, replace the USB board/port. This is quick/cheap (maybe US$10, often less)/easy to do yourself. If you decide to do this, search for KeithRoss39's guide in the General section (do an advanced search on his username), this thread has all the info you need to get it done.
This should enable you to get a successful stock flash & hopefully fix the issues assuming it's not something else hardware-wise, which you're only going to find out by doing these things first. If you have trouble getting a flash away once you've replaced the board/port (and even before you do that), search for Hopper8's 'Odin troubleshooting' thread & try the stuff suggested in the thread.
MistahBungle said:
Yes, try flashing a stock rom with Odin first in download mode. No, flashing a one part firmware will not erase her stuff normally, though I'm not the type of person to give 100% guarantees on anything phone-related.
Sounds like a dodgy USB board/port which is on the way out will probably make it hard to do an Odin flash of stock though. What you've described definitely sounds like it's on the fritz. If you can't get a successful stock flash after trying absolutely everything & those USB issues persist/seem to be the problem, replace the USB board/port. This is quick/cheap (maybe US$10, often less)/easy to do yourself. If you decide to do this, search for KeithRoss39's guide in the General section (do an advanced search on his username), this thread has all the info you need to get it done.
This should enable you to get a successful stock flash & hopefully fix the issues assuming it's not something else hardware-wise, which you're only going to find out by doing these things first. If you have trouble getting a flash away once you've replaced the board/port (and even before you do that), search for Hopper8's 'Odin troubleshooting' thread & try the stuff suggested in the thread.
Click to expand...
Click to collapse
Thanks for the swift reply.
Just took a quick look at KeithRoss39's guide and the micro USB replacement vid and it does seem quite easy and inexpensive to do.
The photos are her main concern and i don't want to attempt flashing her phone as it currently is considering the very temperamental state the USB connection is in.
I'll mull over this option with her as ironically it seems to be the safest route to go down.
Thanks very much for your help mate:highfive:
You should be fine, there shouldn't be any data loss. But I'm not going to be one of those people that tells you flashing a phone is entirely risk free. Because it isn't. As long as everything is working as it should be (PC with reliable USB ports, phone USB port working normally), the risk of any individual flash going bad is very very small.
No worries Let us know how you go/if you get stuck/etc.
Sir, pls help me
i was using cm11 snapshot when this happened
i wiped data/factory reset my phone because i want to change to other rom
but after i wiped data i forgot to install new rom and i clicked reboot system now
after that my phone only show galaxy s2 text then goes blank then galaxy s2 text and repeatedly
i cant enter recovery mode, odin didnt recognize my phone because i didnt tick debugging mode because i cant see debugging mode after i updated to cm11 and i cant even do a hard reset through physical key
pls help me.. am i doing wrong?
i tried odin in windows 8
help me guys T_T
You don't need to have USB debugging on to flash with Odin; Odin operates at a 'lower level' than that.
Find Hopper8's 'Odin troubleshooting' thread stickied in General & go through the troubleshooting steps methodically/as many times as you need to in order to get a successful flash.
MistahBungle said:
You don't need to have USB debugging on to flash with Odin; Odin operates at a 'lower level' than that.
Find Hopper8's 'Odin troubleshooting' thread stickied in General & go through the troubleshooting steps methodically/as many times as you need to in order to get a successful flash.
Click to expand...
Click to collapse
i tried and once detected, i try to flash but failed
it says "Can't open the serial(COM) port."
any idea sir?
Go through all the troubleshooting steps in that thread one by one; if you do this, you will solve whatever is stopping your phone & PC from recognising each other.
Edit - Only hint I'm giving you (because the whole purpose of having a thread like that is so people like me don't have to go through this stuff over & over with people for the 8,963rd time over the past 2.5 yrs) - in your case; start with different USB cables (particularly the one that came with the phone/original Samsung cables) & different USB ports on the PC (no hubs - use mainboard ports only). These are for starters. If they don't work then you go through everything else in the thread one by one.
Right. No more hints, everything you need to fix your phone is in that thread.
MistahBungle said:
Go through all the troubleshooting steps in that thread one by one; if you do this, you will solve whatever is stopping your phone & PC from recognising each other.
Edit - Only hint I'm giving you (because the whole purpose of having a thread like that is so people like me don't have to go through this stuff over & over with people for the 8,963rd time over the past 2.5 yrs) - in your case; start with different USB cables (particularly the one that came with the phone/original Samsung cables) & different USB ports on the PC (no hubs - use mainboard ports only). These are for starters. If they don't work then you go through everything else in the thread one by one.
Right. No more hints, everything you need to fix your phone is in that thread.
Click to expand...
Click to collapse
tried everything and no luck
is it possible that my phone has mini-usb port error?
because it takes about 2 seconds delay to respong carghing when i plug it in
It's possible, yes. Only way you're going to know if this is the case/not is by replacing it (the entire board, not just the port itself) though. It's certainly quick/cheap to do yourself, so you don't have a great deal to lose by replacing it (apart from ~US$10) & seeing if this fixes the issue. Search for KeithRoss39's guide in General (search specifically for 'replacing USB charger board'), has all the info you need to help you get this done.
MistahBungle said:
It's possible, yes. Only way you're going to know if this is the case/not is by replacing it (the entire board, not just the port itself) though. It's certainly quick/cheap to do yourself, so you don't have a great deal to lose by replacing it (apart from ~US$10) & seeing if this fixes the issue. Search for KeithRoss39's guide in General (search specifically for 'replacing USB charger board'), has all the info you need to help you get this done.
Click to expand...
Click to collapse
sent my phone to service already because i just newbie who only know about flashing-recovery-download mode, didnt know about hardware at all
anyway, thanks for helping me :laugh:
Hello everyone!
I tried to Upgrade this S2 i9100 phone from android 2.3 to 4.1.2. I used ODIN 1.87 and I9100XWMS3 ROM. when I started ODIN to flash the ROM it stucked in connecting or something like that for a long time, so i unplugged the cable and removed the battery. after that I can't turn on the phone, or go to Download/Recovery mode and anything I do just the first picture appears.
So is it Bricked or something?
is there any soulution?
when plug it to pc and open ODIN, it recognizes the phone. and when I try to flash the ROM it fails (like the second picture).
Probably not bricked; that picture of the phone/PC on the screen means the phone is in forced download mode. One way or another you need to get a successful Odin flash, and the way you do that is find Hopper8's 'Odin troubleshooting' thread stickied in General & go through the troubleshooting steps in a methodical way as many times as you need to until you do get a successful flash.
MistahBungle said:
Probably not bricked; that picture of the phone/PC on the screen means the phone is in forced download mode. One way or another you need to get a successful Odin flash, and the way you do that is find Hopper8's 'Odin troubleshooting' thread stickied in General & go through the troubleshooting steps in a methodical way as many times as you need to until you do get a successful flash.
Click to expand...
Click to collapse
Thanks man. I was freaked out, because it's someone else's phone. when you said it's a forced download mode, I thought there must be some way. and I've found the solution here:
http://forum.xda-developers.com/galaxy-s2/general/repair-i9100g-samsung-galaxy-s2-flashed-t1448765
I just thought that the Phone was a i9100 like my old one, but it turned out to be a i9100G. So originally a wrong firmware caused the problem. and the pit file in that topic solved it.
Thanks again man.
Good work figuring out what caused the problem & doing the research/fixing yourself