I am using the SWApp App and it seems to not vibrate or get notification until I press the power button. How can I get notifications in real time and not by pressing power button? Is the Bluetooth going to sleep when put to sleep? Thanks
I Always get a notification... dont need to press anything, have you got a power saver app that is regulating the connections? Normally its wifi that gets killed when screen is off...
Same thing happens to me.
I get the notification at the exact same time the screen turns on.
I doubt this is a bluetooth problem because if I receive a sms and go to plane mode on the phone, the notification still appear when I turn the swatch screen on. (then, swapp link crashes)
If I do not turn the screen on, I still receive the notification, but several minutes later.
@MrTip Did you figure out how to fix the bluetooth sleep/delay issue? Thanks
MrTip said:
Same thing happens to me.
I get the notification at the exact same time the screen turns on.
I doubt this is a bluetooth problem because if I receive a sms and go to plane mode on the phone, the notification still appear when I turn the swatch screen on. (then, swapp link crashes)
If I do not turn the screen on, I still receive the notification, but several minutes later.
Click to expand...
Click to collapse
Firmware issue. General rule is stock for standalone and BT ROM (assuming your TS is even compatible) for companion.
Thanks @Lokifish Marz
Same issue with BT Rom . It only gets notification when power is pressed or notification is delayed. It does get notification when it's supposed to if the device is charging. Swapp/OSmart bluetooth notifications do not work on 20140120, 20140120 with EnSec, 20140527, or Dee Troy 1.1.1 BT Rom. Is this still a firmware issue or can it be hardware? Why is no one else having this issue or is it isolated like MrTip and me? Thanks again!
btw I can bluetooth internet tether with BT Rom now....
Lokifish Marz said:
Firmware issue. General rule is stock for standalone and BT ROM (assuming your TS is even compatible) for companion.
Click to expand...
Click to collapse
techknight180 said:
@MrTip Did you figure out how to fix the bluetooth sleep/delay issue? Thanks
Click to expand...
Click to collapse
In my (successful) attempt to get a working recovery I started with a blank slate and did not reinstalled swapp links yet.
Related
Hi,
In my Sony S I set WiFi to turn off when: "Never, when charging" and turn off (unchecked) GSM data transfer but still when screen is off I am receiving emails.
Why it is? If WiFi is not working when screen off, data transfer is turn off why I receiving emails?
It's really icky.
Whenever my screen is off, it DC's, then I hear getting an e-mail, and 10 mins after that, when I turn on the screen it says disconnected. Also, the settings aren't that clear.
A minor bug if you'd ask me
me too
This also happens to me. I recieve email even thogh I have checked wifi off when screen off.
Now I put into flight mode then turn screen off. This seems to work.
So, it looking like we found another firmware bug
I just got my SGPT111 this thursday. Been playing with it ever since. Updating to latest firmware and installing apps and trying different things tearing my hair over the lcd-protection for the display and such IO'm happier than an tornado in a trailerpark over this tablet. Only drawback I have found so far is just the WiFi.
I don't want it to turn of or go offline when screen goes black. I want it active 100% of the time, but no matter what I do or what I try, it still goes off when screen goes black ?!?
Is there something I have missed?
I've tried "when screen goes off"
"never when plugged in" and also
"never (uses more battery power) but still no dice.
Any ideas or suggestions that might help ?
I guess its the system turning wifi on to push email notifications.
Sent from my GT-I9100
something it is. Will try and test another AP if possible and see if that helps.
I want it on, not off
oh ell, I guess I can live with it beeing off when screen is off, but I rather not.
I didn't try it too much time, but with the app "Advanced WiFi Lock Free" it seems that the wifi still works when the screen is off.
However i tried it only a couple of minutes.
Riscas said:
I didn't try it too much time, but with the app "Advanced WiFi Lock Free" it seems that the wifi still works when the screen is off.
However i tried it only a couple of minutes.
Click to expand...
Click to collapse
I confirm.. it works!
Sent from my Sony Tablet S using Tapatalk
Silver-Eye said:
I confirm.. it works!
Sent from my Sony Tablet S using Tapatalk
Click to expand...
Click to collapse
a little sad you need to use a 3rd part app for it, but I guess that'll have to do until Sony fix it
Thanx for testing it.
No problem, but its true.. a pitty that has to be an app, fixing this maybe with ics will be corrected... I was trying in the other modes now, like wifi on, only when connected, but it seems. That with this app, the wifi is always on, and not only when the tab is plugged..
Sent from my Sony Tablet S using Tapatalk
Hey,
I'm looking for exactly the opposite. I want wifi off when i turn my display off. Is there an app for that? Because it seems to me that wifi starts sometimes again when i turn the display off even when I've adjusted my settings otherwise.
Gesendet von meinem Sony Tablet S mit Tapatalk
Hi everybody.
I just bought a Samsung S3 but I have a problem..
Every time I put my phone in standby, after 5-10 minutes the phone stops getting push notifications (fb, whatsup). I need to turn it on and after that everything's fine..
I tried do update to android revolution hd 17.1 but I still get this problem..
I've already tried to set Wi-Fi to always off, checked all notification setting but to no avail..
Is there a way to receive internet messages without turning on the phone every 5 minutes?
stilgar1984 said:
Hi everybody.
I just bought a Samsung S3 but I have a problem..
Every time I put my phone in standby, after 5-10 minutes the phone stops getting push notifications (fb, whatsup). I need to turn it on and after that everything's fine..
I tried do update to android revolution hd 17.1 but I still get this problem..
I've already tried to set Wi-Fi to always off, checked all notification setting but to no avail..
Is there a way to receive internet messages without turning on the phone every 5 minutes?
Click to expand...
Click to collapse
Their is a refresh setting of almost every internet app, try to change those. And check whether Do Not Disturb option in the notification panel is not on.
Hit Thanks if this helped.
Disable smart alert in 'motion' and that should fix it
Especially if you have a broken/malfunctioning proximity sensor
Sent from my GT-I9305 using xda app-developers app
Taimur Akmal said:
Their is a refresh setting of almost every internet app, try to change those. And check whether Do Not Disturb option in the notification panel is not on.
Hit Thanks if this helped.
Click to expand...
Click to collapse
Sorry but I can't find any refresh setting in phone settings or whatsapp options. Can you please tell me where can I find them?
Have you downloaded any deep sleep apps or Juice Defender/any other battery management app?
Bodoma said:
Have you downloaded any deep sleep apps or Juice Defender/any other battery management app?
Click to expand...
Click to collapse
No I didn't.
I even did a hard reset 2 days ago. The only apps I have right now are whatapp and fb messanger
I just tried to uncheck "smart alert" but the problem persists.
Okay wait, when you say 'standby mode', you just mean you're locking it, right?
Assuming that the answer to my previous question is 'yes', tell me, when you turn your screen back on do you get a little notification on the bottom of the screen that says "You are now connected to (whatever your WiFi is called)" ?
He still doesn't receive texts I believe so this is not having the WiFi set to turn off at lock
Sent from my GT-I9305 using xda app-developers app
Bodoma said:
Okay wait, when you say 'standby mode', you just mean you're locking it, right?
Assuming that the answer to my previous question is 'yes', tell me, when you turn your screen back on do you get a little notification on the bottom of the screen that says "You are now connected to (whatever your WiFi is called)" ?
Click to expand...
Click to collapse
My issue only occurs when in 3G. It seem the phone disconnects from 3g line when in deep sleep.
I've already tried to use different sims of different operators getting the same behaviour
If I connect my s3 to a wifi spot it always gets notifications instantly
Swapp Link and Osmart companion do not work properly because Bluetooth seems to sleep when the device screen times out. For example, Swapp Link or Osmart set up... I call my phone..the phone rings... watch is off and not ringing... If I turn on the watch while the call is being made I get the notification on the watch. Another example, I use the ring my watch on Swapp app and it doesn't ring until I turn the watch screen on. I also do not get my Swapp notifications until I turn on my screen. I am running EnSec 20140318_v2. I tried running the new firmware...same issue. What is going on? No power saver apps installed (watch is vanilla) Thanks!
I have no idea. It works for me on stock 05/27 without any issues. Or you sure you don't just have faulty Bluetooth?
Hello,
I have noticed since I started using whatsapp and viber that when the phone screen is turned off, if someone sends me a message via whatsapp, the phone doesn't instantly notify me. It is only when I turn the screen back on that I get the notification. Also, when someone calls me on viber, the phone doesn't ring. Again, it is only I turn the screen on, that I see all the missed calls.
I mostly use my phone on a wifi connection and the power saving mode is set on smart.
What can I do to get notifications as they are sent and not until I turn on the screen ?
Thanks
medwatt said:
Hello,
I have noticed since I started using whatsapp and viber that when the phone screen is turned off, if someone sends me a message via whatsapp, the phone doesn't instantly notify me. It is only when I turn the screen back on that I get the notification. Also, when someone calls me on viber, the phone doesn't ring. Again, it is only I turn the screen on, that I see all the missed calls.
I mostly use my phone on a wifi connection and the power saving mode is set on smart.
What can I do to get notifications as they are sent and not until I turn on the screen ?
Thanks
Click to expand...
Click to collapse
Look into huawei's power saving thing. It diables background apps. Just put a check in the box where it says allow in background.
Settings-power savings protected apps.
Moody66 said:
Look into huawei's power saving thing. It diables background apps. Just put a check in the box where it says allow in background.
Settings-power savings protected apps.
Click to expand...
Click to collapse
I did that, obviously. I have noticed that with mobile data on, i can get notifications. It seems its a wifi thing.
medwatt said:
I did that, obviously. I have noticed that with mobile data on, i can get notifications. It seems its a wifi thing.
Click to expand...
Click to collapse
Check this setting:
General, WI-FI, (menu key or 3 dots button) Advanced, Keep WIFI on During Sleep, Always
Sent from my MT2L03 using Tapatalk
arcadesdude said:
Check this setting:
General, WI-FI, (menu key or 3 dots button) Advanced, Keep WIFI on During Sleep, Always
Sent from my MT2L03 using Tapatalk
Click to expand...
Click to collapse
That is also checked.
Maybe you can try steps in following post and see, it works for me quite well:
http://forum.xda-developers.com/showpost.php?p=56936970&postcount=3
Same problem on my samsung j7.my viber doesnt ring.no notification until i open my viber app.
On the 25th of May, the new Android Wear started to get installed to Moto 360 2nd Gen devices.
Did you get it yet?
Sent from my m1 note using Tapatalk
In italy I still did not get any updates
scorpionredblack said:
In italy I still did not get any updates
Click to expand...
Click to collapse
You Can Force the update...i'm italian and i have install It yesterday.
How do I force him?
scorpionredblack said:
How do I force him?
Click to expand...
Click to collapse
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
I received the update. The watch stuck on finishing update. Any one have same problem?
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
It really worked!! Thank you
Since 2.0, my watch isn't showing the Hour when i put it in recharge mode at night. It goes in recharge mode for 5 secondes, showing the hour, and then it goes to a grey screen for all the night. Its annoying to sleep, and useless cause i cant see the hour.
Anyone with the same issue or have an idea?
I found a solution, but i dont know if it's not a bad solution for the battery life of the watch: putting "ALWAYS ON DURING CHARGE" mode in the developper's options. I'am scared to damage the watch and the battery, forcing it to be ON all the night and charging.
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
I can't use my watch when it's charging.
How did u open the settings/info panel?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
I can't use my watch when it's charging.
How did u open the settings/info panel?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
Click on the side button of the watch for 2 seconds when it charges, this will open the options of the watch.
Forced update?
Couldn't get this to work for me.
I'm curious though, just how Moto (or Google as the case may be) implements a "gradual" update (that is, some users get it before others).
retiredguy1945 said:
Couldn't get this to work for me.
I'm curious though, just how Moto (or Google as the case may be) implements a "gradual" update (that is, some users get it before others).
Click to expand...
Click to collapse
This is the same as it happens for mobiles.
During big updates you can find devices getting the update with many days difference.
Sent from my m1 note using Tapatalk
djulien83 said:
Since 2.0, my watch isn't showing the Hour when i put it in recharge mode at night. It goes in recharge mode for 5 secondes, showing the hour, and then it goes to a grey screen for all the night. Its annoying to sleep, and useless cause i cant see the hour.
Anyone with the same issue or have an idea?
I found a solution, but i dont know if it's not a bad solution for the battery life of the watch: putting "ALWAYS ON DURING CHARGE" mode in the developper's options. I'am scared to damage the watch and the battery, forcing it to be ON all the night and charging.
Click to expand...
Click to collapse
this wil fix it: When turning on in settings 'always on display' it works like before. no need to enable stay awake while charging in developers settings.
Although this fixes the issue, I am somewhat disappointed because this option reduces battery life.
Sn0w0nS said:
this wil fix it: When turning on in settings 'always on display' it works like before. no need to enable stay awake while charging in developers settings.
Although this fixes the issue, I am somewhat disappointed because this option reduces battery life.
Click to expand...
Click to collapse
Yeah, and with my watchface, "Always on" display option is unsupported, this looks very ugly because the watch never sleep off, it stays turned on all the time with the brightness at minimum, even if i cover the watch.
djulien83 said:
Yeah, and with my watchface, "Always on" display option is unsupported, this looks very ugly because the watch never sleep off, it stays turned on all the time with the brightness at minimum, even if i cover the watch.
Click to expand...
Click to collapse
What watch face are you using?
Sn0w0nS said:
What watch face are you using?
Click to expand...
Click to collapse
Skymaster by Zuhanden
https://play.google.com/store/apps/...tchface.watch.face.aviator.android.wear&hl=fr
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
I tried again.
Clicked many times on the green screen, but nothing happened.
Do u need to do it a specific number of times or to click when there is a specific message?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
I tried again.
Clicked many times on the green screen, but nothing happened.
Do u need to do it a specific number of times or to click when there is a specific message?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
Keep tapping until it happens. Might take a while, but it will happen. I tapped mine for over a minute straight multiple times before it showed up.
Now if it would stop constantly running into a problem while installing...
I had to turn off my wifi manually as after downloading, while countdown to restart, it always stopped in between with the same green screen and message that system is up to date. So after downloading is complete, just turn off the wifi. And also make sure to disconnect bluetooth before you try force updating, just connect with wifi on watch, it'll work for sure.
vishal007 said:
i had to turn off my wifi manually as after downloading, while countdown to restart, it always stopped in between with the same green screen and message that system is up to date. So after downloading is complete, just turn off the wifi. And also make sure to disconnect bluetooth before you try force updating, just connect with wifi on watch, it'll work for sure.
Click to expand...
Click to collapse
omg this worked! Thank you so much!