On the 25th of May, the new Android Wear started to get installed to Moto 360 2nd Gen devices.
Did you get it yet?
Sent from my m1 note using Tapatalk
In italy I still did not get any updates
scorpionredblack said:
In italy I still did not get any updates
Click to expand...
Click to collapse
You Can Force the update...i'm italian and i have install It yesterday.
How do I force him?
scorpionredblack said:
How do I force him?
Click to expand...
Click to collapse
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
I received the update. The watch stuck on finishing update. Any one have same problem?
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
It really worked!! Thank you
Since 2.0, my watch isn't showing the Hour when i put it in recharge mode at night. It goes in recharge mode for 5 secondes, showing the hour, and then it goes to a grey screen for all the night. Its annoying to sleep, and useless cause i cant see the hour.
Anyone with the same issue or have an idea?
I found a solution, but i dont know if it's not a bad solution for the battery life of the watch: putting "ALWAYS ON DURING CHARGE" mode in the developper's options. I'am scared to damage the watch and the battery, forcing it to be ON all the night and charging.
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
I can't use my watch when it's charging.
How did u open the settings/info panel?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
I can't use my watch when it's charging.
How did u open the settings/info panel?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
Click on the side button of the watch for 2 seconds when it charges, this will open the options of the watch.
Forced update?
Couldn't get this to work for me.
I'm curious though, just how Moto (or Google as the case may be) implements a "gradual" update (that is, some users get it before others).
retiredguy1945 said:
Couldn't get this to work for me.
I'm curious though, just how Moto (or Google as the case may be) implements a "gradual" update (that is, some users get it before others).
Click to expand...
Click to collapse
This is the same as it happens for mobiles.
During big updates you can find devices getting the update with many days difference.
Sent from my m1 note using Tapatalk
djulien83 said:
Since 2.0, my watch isn't showing the Hour when i put it in recharge mode at night. It goes in recharge mode for 5 secondes, showing the hour, and then it goes to a grey screen for all the night. Its annoying to sleep, and useless cause i cant see the hour.
Anyone with the same issue or have an idea?
I found a solution, but i dont know if it's not a bad solution for the battery life of the watch: putting "ALWAYS ON DURING CHARGE" mode in the developper's options. I'am scared to damage the watch and the battery, forcing it to be ON all the night and charging.
Click to expand...
Click to collapse
this wil fix it: When turning on in settings 'always on display' it works like before. no need to enable stay awake while charging in developers settings.
Although this fixes the issue, I am somewhat disappointed because this option reduces battery life.
Sn0w0nS said:
this wil fix it: When turning on in settings 'always on display' it works like before. no need to enable stay awake while charging in developers settings.
Although this fixes the issue, I am somewhat disappointed because this option reduces battery life.
Click to expand...
Click to collapse
Yeah, and with my watchface, "Always on" display option is unsupported, this looks very ugly because the watch never sleep off, it stays turned on all the time with the brightness at minimum, even if i cover the watch.
djulien83 said:
Yeah, and with my watchface, "Always on" display option is unsupported, this looks very ugly because the watch never sleep off, it stays turned on all the time with the brightness at minimum, even if i cover the watch.
Click to expand...
Click to collapse
What watch face are you using?
Sn0w0nS said:
What watch face are you using?
Click to expand...
Click to collapse
Skymaster by Zuhanden
https://play.google.com/store/apps/...tchface.watch.face.aviator.android.wear&hl=fr
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
I tried again.
Clicked many times on the green screen, but nothing happened.
Do u need to do it a specific number of times or to click when there is a specific message?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
I tried again.
Clicked many times on the green screen, but nothing happened.
Do u need to do it a specific number of times or to click when there is a specific message?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
Keep tapping until it happens. Might take a while, but it will happen. I tapped mine for over a minute straight multiple times before it showed up.
Now if it would stop constantly running into a problem while installing...
I had to turn off my wifi manually as after downloading, while countdown to restart, it always stopped in between with the same green screen and message that system is up to date. So after downloading is complete, just turn off the wifi. And also make sure to disconnect bluetooth before you try force updating, just connect with wifi on watch, it'll work for sure.
vishal007 said:
i had to turn off my wifi manually as after downloading, while countdown to restart, it always stopped in between with the same green screen and message that system is up to date. So after downloading is complete, just turn off the wifi. And also make sure to disconnect bluetooth before you try force updating, just connect with wifi on watch, it'll work for sure.
Click to expand...
Click to collapse
omg this worked! Thank you so much!
Related
Hi,
In my Sony S I set WiFi to turn off when: "Never, when charging" and turn off (unchecked) GSM data transfer but still when screen is off I am receiving emails.
Why it is? If WiFi is not working when screen off, data transfer is turn off why I receiving emails?
It's really icky.
Whenever my screen is off, it DC's, then I hear getting an e-mail, and 10 mins after that, when I turn on the screen it says disconnected. Also, the settings aren't that clear.
A minor bug if you'd ask me
me too
This also happens to me. I recieve email even thogh I have checked wifi off when screen off.
Now I put into flight mode then turn screen off. This seems to work.
So, it looking like we found another firmware bug
I just got my SGPT111 this thursday. Been playing with it ever since. Updating to latest firmware and installing apps and trying different things tearing my hair over the lcd-protection for the display and such IO'm happier than an tornado in a trailerpark over this tablet. Only drawback I have found so far is just the WiFi.
I don't want it to turn of or go offline when screen goes black. I want it active 100% of the time, but no matter what I do or what I try, it still goes off when screen goes black ?!?
Is there something I have missed?
I've tried "when screen goes off"
"never when plugged in" and also
"never (uses more battery power) but still no dice.
Any ideas or suggestions that might help ?
I guess its the system turning wifi on to push email notifications.
Sent from my GT-I9100
something it is. Will try and test another AP if possible and see if that helps.
I want it on, not off
oh ell, I guess I can live with it beeing off when screen is off, but I rather not.
I didn't try it too much time, but with the app "Advanced WiFi Lock Free" it seems that the wifi still works when the screen is off.
However i tried it only a couple of minutes.
Riscas said:
I didn't try it too much time, but with the app "Advanced WiFi Lock Free" it seems that the wifi still works when the screen is off.
However i tried it only a couple of minutes.
Click to expand...
Click to collapse
I confirm.. it works!
Sent from my Sony Tablet S using Tapatalk
Silver-Eye said:
I confirm.. it works!
Sent from my Sony Tablet S using Tapatalk
Click to expand...
Click to collapse
a little sad you need to use a 3rd part app for it, but I guess that'll have to do until Sony fix it
Thanx for testing it.
No problem, but its true.. a pitty that has to be an app, fixing this maybe with ics will be corrected... I was trying in the other modes now, like wifi on, only when connected, but it seems. That with this app, the wifi is always on, and not only when the tab is plugged..
Sent from my Sony Tablet S using Tapatalk
Hey,
I'm looking for exactly the opposite. I want wifi off when i turn my display off. Is there an app for that? Because it seems to me that wifi starts sometimes again when i turn the display off even when I've adjusted my settings otherwise.
Gesendet von meinem Sony Tablet S mit Tapatalk
hi guys
i am having some weird problems with my s3, sometimes when i set my screen time out to 30 seconds. sometimes my s3 screen will not turn off, sometimes this happens while charging, sometimes after getting my battery pack full charge my screen will not also turn off, and the most recent event taht just happened is someone just gave me an phone call and i was not able to answer that call; after that event the screen of my s3 did not turn off. i think it was turned on for about an hour.
is the screen timeout features has bugs? if i set it to 30 seconds this weird event happens; to fix this trouble i need to press the power button manually. if i set it to 15 seconds i think it works ok but the time span is too short for me and right now i am trying to observe the 1 minute screen time out. but for me the 1 minute option is too long.
has anyone of you guys also felt that setting the screen timeout feature to 30 seconds is buggy? and what were your solutions to this problem?
thanks guys
I am experiencing a similar problem however I cant pin it down to a certain circumstance or some up with a solution. The problem seems to have started for me after the Jelly Bean update.
Do you have developer options under settings enabled? If so, do you have "stay awake" ticked or un-ticked?
Also there are couple of widgets causing a problem with screen timeout, like "Extended Controls". If you have that installed, uninstall and check again.
bnbasarir said:
Do you have developer options under settings enabled? If so, do you have "stay awake" ticked or un-ticked?
Also there are couple of widgets causing a problem with screen timeout, like "Extended Controls". If you have that installed, uninstall and check again.
Click to expand...
Click to collapse
I have checked the setting and the "stay awake" is unchecked. Yesterday it was staying on all of the time, but today it only seems to do it when it is on the charger. To weird... I only have a few widgets I am using, Calendar, weather bug, flip book and Google play Music. are any of these causing a known problem?
Conzo427 said:
I have checked the setting and the "stay awake" is unchecked. Yesterday it was staying on all of the time, but today it only seems to do it when it is on the charger. To weird... I only have a few widgets I am using, Calendar, weather bug, flip book and Google play Music. are any of these causing a known problem?
Click to expand...
Click to collapse
Do you have Smart Stay enabled under Settings > Display
I know that if my phone is in certain places in the room when I have been using it and just put it dowb the screen stays on as Smart Stay is detecting that I am still looking at it even though I am not just try turning Smart Stay off for a day and see if it stops doing it.
Conzo427 said:
I have checked the setting and the "stay awake" is unchecked. Yesterday it was staying on all of the time, but today it only seems to do it when it is on the charger. To weird... I only have a few widgets I am using, Calendar, weather bug, flip book and Google play Music. are any of these causing a known problem?
Click to expand...
Click to collapse
These are not the "usual suspects" but what I can suggest is removing all of them and adding one by one while checking the time out. Its not the best way but its the only way to identify since its not a common problem :/
bnbasarir said:
These are not the "usual suspects" but what I can suggest is removing all of them and adding one by one while checking the time out. Its not the best way but its the only way to identify since its not a common problem :/
Click to expand...
Click to collapse
I will give this a shot and see what happens. I had used these widgets on my old phone without a problem, but it is worth a try.
ag4751 said:
Do you have Smart Stay enabled under Settings > Display
I know that if my phone is in certain places in the room when I have been using it and just put it dowb the screen stays on as Smart Stay is detecting that I am still looking at it even though I am not just try turning Smart Stay off for a day and see if it stops doing it.
Click to expand...
Click to collapse
I initially thought is had something to do with smart stay as well as I did have it enabled, however turning it off did not solve the problem.
Anyone have a solution? I am experiencing the same issue where the screen does not time out... It will work when i do a reset.
I have tried to disable all widgets and thought that worked, but later determined it was still happening. it really seems sporadic. The problem persists consistently for a period of time, but then will work fine for a while, then go back to not working. My battery is dead now because I missed a call, the screen turned on, and never turned off. I am just discovering this 3 hours later... There has to be a solution. I may have to do a master reset, but I just did one due to reception issues and don't want to go through it again. Who knows if it will even solve the problem.
I've noticed this issue since first getting my S3 in July. So I do know it happened with 4.0.4 and now with 4.1.1. I've never used the "Stay Awake" option in the dev options and it still remains off. I've had the issue with both "Smart Stay" on and off. I've tested it with all screen time out times, as well as going through the trouble of factory resetting the device and nothing changed. The only solution I've found is reboot the phone and it will work again for a day or so until I notice it again. Very annoying and would love to find a solution to this!
I am having the same problem with my AT&T galaxy s III only a hard reset (pull battery) will fix it but it comes back at random times. Any updates on this?
Same problem here, it's strange because it just happens randomly.
Some days I will look at my phone and it appears to have a miraculous 50% battery drop. I too keep screen timeout set to 30 seconds...any insight here would be awesomely appreciated.
AT&T Galaxy S3
SGH-I747
You need to check for wakelocks,
Wakelocks can be used by other apps to wake your screen, and keep it on.
I discovered it by using Wakelock app :
Wakelock detector at GooglePlay
Hi everybody.
I just bought a Samsung S3 but I have a problem..
Every time I put my phone in standby, after 5-10 minutes the phone stops getting push notifications (fb, whatsup). I need to turn it on and after that everything's fine..
I tried do update to android revolution hd 17.1 but I still get this problem..
I've already tried to set Wi-Fi to always off, checked all notification setting but to no avail..
Is there a way to receive internet messages without turning on the phone every 5 minutes?
stilgar1984 said:
Hi everybody.
I just bought a Samsung S3 but I have a problem..
Every time I put my phone in standby, after 5-10 minutes the phone stops getting push notifications (fb, whatsup). I need to turn it on and after that everything's fine..
I tried do update to android revolution hd 17.1 but I still get this problem..
I've already tried to set Wi-Fi to always off, checked all notification setting but to no avail..
Is there a way to receive internet messages without turning on the phone every 5 minutes?
Click to expand...
Click to collapse
Their is a refresh setting of almost every internet app, try to change those. And check whether Do Not Disturb option in the notification panel is not on.
Hit Thanks if this helped.
Disable smart alert in 'motion' and that should fix it
Especially if you have a broken/malfunctioning proximity sensor
Sent from my GT-I9305 using xda app-developers app
Taimur Akmal said:
Their is a refresh setting of almost every internet app, try to change those. And check whether Do Not Disturb option in the notification panel is not on.
Hit Thanks if this helped.
Click to expand...
Click to collapse
Sorry but I can't find any refresh setting in phone settings or whatsapp options. Can you please tell me where can I find them?
Have you downloaded any deep sleep apps or Juice Defender/any other battery management app?
Bodoma said:
Have you downloaded any deep sleep apps or Juice Defender/any other battery management app?
Click to expand...
Click to collapse
No I didn't.
I even did a hard reset 2 days ago. The only apps I have right now are whatapp and fb messanger
I just tried to uncheck "smart alert" but the problem persists.
Okay wait, when you say 'standby mode', you just mean you're locking it, right?
Assuming that the answer to my previous question is 'yes', tell me, when you turn your screen back on do you get a little notification on the bottom of the screen that says "You are now connected to (whatever your WiFi is called)" ?
He still doesn't receive texts I believe so this is not having the WiFi set to turn off at lock
Sent from my GT-I9305 using xda app-developers app
Bodoma said:
Okay wait, when you say 'standby mode', you just mean you're locking it, right?
Assuming that the answer to my previous question is 'yes', tell me, when you turn your screen back on do you get a little notification on the bottom of the screen that says "You are now connected to (whatever your WiFi is called)" ?
Click to expand...
Click to collapse
My issue only occurs when in 3G. It seem the phone disconnects from 3g line when in deep sleep.
I've already tried to use different sims of different operators getting the same behaviour
If I connect my s3 to a wifi spot it always gets notifications instantly
I am using the SWApp App and it seems to not vibrate or get notification until I press the power button. How can I get notifications in real time and not by pressing power button? Is the Bluetooth going to sleep when put to sleep? Thanks
I Always get a notification... dont need to press anything, have you got a power saver app that is regulating the connections? Normally its wifi that gets killed when screen is off...
Same thing happens to me.
I get the notification at the exact same time the screen turns on.
I doubt this is a bluetooth problem because if I receive a sms and go to plane mode on the phone, the notification still appear when I turn the swatch screen on. (then, swapp link crashes)
If I do not turn the screen on, I still receive the notification, but several minutes later.
@MrTip Did you figure out how to fix the bluetooth sleep/delay issue? Thanks
MrTip said:
Same thing happens to me.
I get the notification at the exact same time the screen turns on.
I doubt this is a bluetooth problem because if I receive a sms and go to plane mode on the phone, the notification still appear when I turn the swatch screen on. (then, swapp link crashes)
If I do not turn the screen on, I still receive the notification, but several minutes later.
Click to expand...
Click to collapse
Firmware issue. General rule is stock for standalone and BT ROM (assuming your TS is even compatible) for companion.
Thanks @Lokifish Marz
Same issue with BT Rom . It only gets notification when power is pressed or notification is delayed. It does get notification when it's supposed to if the device is charging. Swapp/OSmart bluetooth notifications do not work on 20140120, 20140120 with EnSec, 20140527, or Dee Troy 1.1.1 BT Rom. Is this still a firmware issue or can it be hardware? Why is no one else having this issue or is it isolated like MrTip and me? Thanks again!
btw I can bluetooth internet tether with BT Rom now....
Lokifish Marz said:
Firmware issue. General rule is stock for standalone and BT ROM (assuming your TS is even compatible) for companion.
Click to expand...
Click to collapse
techknight180 said:
@MrTip Did you figure out how to fix the bluetooth sleep/delay issue? Thanks
Click to expand...
Click to collapse
In my (successful) attempt to get a working recovery I started with a blank slate and did not reinstalled swapp links yet.
Hello Everyone - I just purchased my Zenwatch 2 a few days ago and have mixed feelings about it. I have a few issues but not quite sure if it's just user error or if I have a lemon watch. I want to be able to power down my watch and charge it nightly, however when I power down the watch and attach the pogo charger, the watch instantly powers back on. I tried it three times in a row in different variations (placing it on the charger and then powering it down, powering it down and then placing it on the charger etc). Is anyone else having this problem? The reason for powering it off at night is because I don't want to be woken up by the phone's lights/vibrations when I get emails at all hours of the night. Is the watch supposed to do this? I have checked the manual and it says nothing about this.
Thanks in advance for your help.
All smart watches do that
There is a a menu you can pill down from the top and turn of all notifications
Sent from my LG-H812 using XDA Free mobile app
crzygrmn said:
All smart watches do that
There is a a menu you can pill down from the top and turn of all notifications
Sent from my LG-H812 using XDA Free mobile app
Click to expand...
Click to collapse
Wonderful, thank you crzygrmn - that will temporarily fix the buzzing and the lighting up at night. My long term problem is that the watch will not stay off/powered down if I am charging the watch. In other words, I can power down the watch, but as soon as I connect the pogo charger to it, it will instantly turn back on. Likewise when I connect it to the charger and then power the watch down, it will turn back on again as well. Anyone have information on the charging/powering down issue specifically?
Not sure why, but yes they all do that.
exninja said:
Not sure why, but yes they all do that.
Click to expand...
Click to collapse
exninja, thank you for confirming. I wondered because my boyfriend's Samsung Neo 2 watch does not do that - so I thought perhaps my zenwatch 2 shouldn't have either. Thanks again for the reply!
Because the samsung watches mostly run on tizen os .
Sent from my LG-H812 using XDA Free mobile app
I put my watch in theater mode at night. That keeps the display off all night.
I use an app named Slumber (look for it on Google Play).
It does the same as manually setting theater mode, but it is automatic
You could also use Tasker and AutoInput to open the Android Wear app and disconnect the watch at night and reconnect it in the morning. I use it to turn off the screen at night to prevent burn-in.