3g/Calls Not working - Galaxy S III Q&A, Help & Troubleshooting

Hello, i'm from brazil and i have a little problem from my sgs3, with my signal. I only can make emergency calls, and appears on the screen "no service" . I'm using the 4.4.2 custom rom (Blekota) , but the most unusual is, some roms 4.4.2 i have signal, example ( Ressurection Remix ) . How can i fix it ?

Patched modem
Bruno Pistilli said:
Hello, i'm from brazil and i have a little problem from my sgs3, with my signal. I only can make emergency calls, and appears on the screen "no service" . I'm using the 4.4.2 custom rom (Blekota) , but the most unusual is, some roms 4.4.2 i have signal, example ( Ressurection Remix ) . How can i fix it ?
Click to expand...
Click to collapse
Try this custom modem, working for my.
If you get an answer to your question, don't forget to hit thanks button. :highfive:

eduardozeassesme said:
Try this custom modem, working for my.
If you get an answer to your question, don't forget to hit thanks button. :highfive:
Click to expand...
Click to collapse
Don't work for me. Still "No Service" , have another modem to try ?

thanks button please
Bruno Pistilli said:
Don't work for me. Still "No Service" , have another modem to try ?
Click to expand...
Click to collapse
Try this

Hi 2 all!
I have a problem, install custom rom (QS-i9300 / JB 4.3), and after, incoming/outgoing calls stopped working , but the internet and ussd requests - work. IMEI - correct. Tried this modems: JKUGNB2, DBVUGNB2, DXUGNB1, NEUGNA2, NEUGND1 and XXUGNA8 - as before, does not work :crying:
Help please

eduardozeassesme said:
Try this
Click to expand...
Click to collapse
Still "No Service"

kernel
what kernel using?
---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------
TRIPL3 H said:
Hi 2 all!
I have a problem, install custom rom (QS-i9300 / JB 4.3), and after, incoming/outgoing calls stopped working , but the internet and ussd requests - work. IMEI - correct. Tried this modems: JKUGNB2, DBVUGNB2, DXUGNB1, NEUGNA2, NEUGND1 and XXUGNA8 - as before, does not work :crying:
Help please
Click to expand...
Click to collapse
what rom, kernel, gapps using?

What's Ressurrection Remix kernel/modem ? Work in Blekota ROM ? Please a help...

try this apk
Bruno Pistilli said:
Still "No Service"
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s3/help/solved-siii-network-problem-update-sn-t1918601

TRIPL3 H said:
Hi 2 all!
I have a problem, install custom rom (QS-i9300 / JB 4.3), and after, incoming/outgoing calls stopped working , but the internet and ussd requests - work. IMEI - correct. Tried this modems: JKUGNB2, DBVUGNB2, DXUGNB1, NEUGNA2, NEUGND1 and XXUGNA8 - as before, does not work :crying:
Help please
Click to expand...
Click to collapse
Only for 4.3 1- instal the kernel
2- Install the modem
3- hit thanks
4- enjoy
(Work for my with 4.3 rom)
eduardozeassesme said:
http://forum.xda-developers.com/galaxy-s3/help/solved-siii-network-problem-update-sn-t1918601
Click to expand...
Click to collapse
I follow the steps, but i use a 4.4.2 rom (GS5 style) so, the ARIZA patch don't support the "Phone model", appears Phone model: Not proper WARNING!! Your phone model : SM-G900F

Up

Hallo i am using android 4.4.2 rom (blekota 4.6.1) in my rom why is no service and the imei is an/an my location in indonesia please fix this i need the phone and sms sorry for my bad english

I have the same problem, but i'm from brazil ... I downgrade to 4.2.2 , i only upgrade again when i have the solution
Edit:
With this rom, my phone have signal and my 3g network works. Can someone extract ou send me the modem/kernel used in this rom for me? Probaly it resolve my problem...
http://forum.xda-developers.com/galaxy-s3/development/rom-flashingdroidlite-v1-ultra-lite-t2771756

nobody ?

when i was messing with modems, i remember UBEHM5 (or something like that)fixed the issues, now my phone is running another modem(can´t look now, there are people sleeping in the room where phone is charging)

[SOLUTION] No service with Blekota S5 Lite v11
Bruno Pistilli said:
nobody ?
Click to expand...
Click to collapse
I got same problem with ROM Blekota S5 Lite v11 and I did this:
1. Just Flash in same order (No wipes):
- Kernel_Cleaning_Script_v2.7_by_Slim80
- Patched_BUUGMJ3_modem
- boeffla-kernel-6.5-Samsung-i9300.CWM
And the magic is working.

Related

[ KitKat 4.4.2 ] ROM for Micromax A116 [UNOFFICIAL]

[ KitKat 4.4.2 ] ROM for Micromax A116 [UNOFFICIAL]​
For A116, FLY IQ451, MYphone919i, Wiko Cink-5, Qmobile A600​
WARNING:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Features:
Real Android 4.4.2
The new kernel Linux version 3.4.67
Compiled from Linaro GCC 4.9.2 Toolchain.
Modules are integrated into the kernel
Support for 4.4.x
SElinux suport
Click to expand...
Click to collapse
Bugs: NO BUGS
Changelog:
ROM based on AOSP 4.4.2, compiled from source.
In the assembly partially used MMX A109 official rom
Differences from v 0.8:
- Last Hyper-kernel
- Selection a ringtone for 2 SIM
- Launcher3 from Fly
- Power menu with reboot menu
- The new file manager
- SuperSU preinstalled
- GAPPs preinstalled
- Baseband V6.F1
- Many minor changes....
DOWNLOAD LINKS:
DevHost
YANDEX
Direct Download
How to install?
1. Download the ROM
2. Put the file on the SD card
3. Boot on TWRP Recovery
4. Make a backup of current rom using Recovery PhilZTouch or TWRP 2.7.0.0 or TWRP 2.8.0.0
5. Make a wipe Data / Factory Reset
6. Flashing the ROM
7. Restart the phone (WARNING: restart can be long …)
CREDITS:
@BazhinNN
@Cheshkin
@Vla425
Sources:
Kernel: https://github.com/hyperion70/tinno89_wet_kk
Android: ALPS.KK1.MP5.V1.3_EASTAEON89_WET_KK
XDA:DevDB Information
[ KitKat 4.4.2 ] ROM for Micromax A116 [UNOFFICIAL], ROM for the Micromax A116
Contributors
hyperion70, Cheshkin
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-11-01
Last Updated 2014-11-03
Reserved
New Hyper-Kernel​
download:View attachment boot_iq451_no_ZRAM.zip​
Superuser for KitKat​View attachment Superuser.zip​
looks good
Looks good from the screenies . Downloading right now dude.. Will update as soon as I flash it in..
Front cam switch is missing.. however cam patch from discovery solves this.
Does the camera work correct in this ROM? It used to close itself without any error in the previous versions
mirror link dev host pls any one with fast internet
Cam patch link request
zeu55 said:
Front cam switch is missing.. however cam patch from discovery solves this.
Click to expand...
Click to collapse
Can you please post the link for the can patch??, I couldn't locate it in the discovery thread..
@blackbeard please also can you update AOKP with latest device tree of Chris? Or Atleast Can You Merge the latest Omni Rom Patches so that we can get one more stable rom
Regards,
Andy
@zeu55 don't bother I found the link,,
Here it is if anybody else needs it :
http://forum.xda-developers.com/showpost.php?p=55753196&postcount=856
Somebody share the screenshots of this ROM, please
Problems on SW16
@hyperion70 I tries installing this on my CHD sw16 and faced the following problems:
1) No second sim network,although first sim appeared fine.
2)No camera app in drawer,I couldnt open camera through any other alternative also.
yes
blackbeard said:
Does the camera work correct in this ROM? It used to close itself without any error in the previous versions
Click to expand...
Click to collapse
yes, camera is ok
---------- Post added at 11:46 AM ---------- Previous post was at 11:34 AM ----------
ROM doesnot recognize Airtel 2g in both slots.
Any idea how to solve.
It however recognizes 3G Airtel network
---------- Post added at 12:03 PM ---------- Previous post was at 11:46 AM ----------
hgaaditya said:
@hyperion70 I tries installing this on my CHD sw16 and faced the following problems:
1) No second sim network,although first sim appeared fine.
2)No camera app in drawer,I couldnt open camera through any other alternative also.
Click to expand...
Click to collapse
1) Both SIMs work. But if using Airtel sim, that slot needs to enabled with 3G mode
2) Camera app works like charm
@ Sandebal1 Bro thanks for the info.. I hadn't enabled 3g so that was the problem..
Actually I had this "can't connect to camera error." I tried almost all the roms on this thread.. Still the problem persists..
So i think that might have caused the camera bug.
Does anybody have any idea if the issue is software or hardware related..? ?
I did some research on the net and it says that the problem is a software issue but None of the solutions worked for me.. Might have to flash stock rom through sp tools..
hgaaditya said:
@ Sandebal1 Bro thanks for the info.. I hadn't enabled 3g so that was the problem..
Actually I had this "can't connect to camera error." I tried almost all the roms on this thread.. Still the problem persists..
So i think that might have caused the camera bug.
Does anybody have any idea if the issue is software or hardware related..? ?
I did some research on the net and it says that the problem is a software issue but None of the solutions worked for me.. Might have to flash stock rom through sp tools..
Click to expand...
Click to collapse
@hyperion70, could you please provide a solution. I am using dual sim and when I select my second sim as 3G for Internet, my 1st Sim Airtel has no network. I cannot always keep the airtel sim on 3G mode..
Please help:crying:
hgaaditya said:
@ Sandebal1 Bro thanks for the info.. I hadn't enabled 3g so that was the problem..
Actually I had this "can't connect to camera error." I tried almost all the roms on this thread.. Still the problem persists..
So i think that might have caused the camera bug.
Does anybody have any idea if the issue is software or hardware related..? ?
I did some research on the net and it says that the problem is a software issue but None of the solutions worked for me.. Might have to flash stock rom through sp tools..
Click to expand...
Click to collapse
Bro... Its the hardware problem..... You must be having new hardware Phone...and camera bug is present in new hardware phones... So wait till bug is solved.
By The Way, Is The Minor Ui Lag Bug Fixed?
Regards
Andy
Andy1911 said:
Bro... Its the hardware problem..... You must be having new hardware Phone...and camera bug is present in new hardware phones... So wait till bug is solved.
By The Way, Is The Minor Ui Lag Bug Fixed?
Regards
Andy
Click to expand...
Click to collapse
Hi Andy,
Any idea with Airtel 2G bug? Cannot latch on to Airtel 2G network in both Sim slots
If 3G is enabled then, we can latch on to Airtel network or else cannot
Any patch/workaround?
sandebal1 said:
Hi Andy,
Any idea with Airtel 2G bug? Cannot latch on to Airtel 2G network in both Sim slots
If 3G is enabled then, we can latch on to Airtel network or else cannot
Any patch/workaround?
Click to expand...
Click to collapse
Try Flashing P19 Baseband and hope it solves ur issue
MayankD said:
Try Flashing P19 Baseband and hope it solves ur issue
Click to expand...
Click to collapse
i HAD UPDATED TO 4.2.1 ...S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER and then updated to MOLY.WR8.W1248.MD.WG.MPV6.F1,2013/07/11 18:42
If this is not P19 Baseband, could you please help with the link to download
---------- Post added at 03:05 PM ---------- Previous post was at 02:48 PM ----------
hgaaditya said:
@hyperion70 I tries installing this on my CHD sw16 and faced the following problems:
1) No second sim network,although first sim appeared fine.
2)No camera app in drawer,I couldnt open camera through any other alternative also.
Click to expand...
Click to collapse
Flashed the below Baseband and the issue resolved for (1)
http://forum.xda-developers.com/attachment.php?attachmentid=2977778&d=1413779812
@hyperion70
SuperSU did not supported Titanium backup.
When install superuser Titanium backup working fine.
MayankD said:
Try Flashing P19 Baseband and hope it solves ur issue
Click to expand...
Click to collapse
Didnot resolve with P18 or P19,
I flashed CM11 modem, issue resolved...Thanks

[PORT]Kitkat 4.4.4 for A116[FAST&SMOOTH]

PORT from Cubot X9
-Latest Android 4.4.4
-ART work
-Playing Games Smoothly
-Buttery Smooth
-3G SIM Switch
-Init.d Scripts
-Add Multiuser
-Phone Storage & SD Card mounting on PC as USB-Storage
-Flash fixed
-Kernel with GPU OC 476 Mhz. If your device does not support overclocking (decrease fps in 3d apps), use other kernel, i.e. Phoenix5 kernel
Download link A116_art_4_4_4.zip
PS: Sorry, I forgot to change 1lib. Download & flash this zip in CWM
http://d-h.st/oc1y
Credits & Thanks :
hyperion70 - For Kernel & Kitkat
User from 4pda.ru BiTaJIb4ik - For Camera Flash fix
Before flash ROM wipe data/factory reset in CWM
Screen:
Thanks much.
Will try this afternoon.
Ok will try this but can we know battery life?
Nice, but same as the other 4.4.4 port it's not pure AOSP, the settings.apk and systemui.apk are themed and not compatible with gravity box. I tried replacing them with those of CM11, but no dice.
Is there any way we could have those two as untouched AOSP as well? That would be superb, this ROM would make for an awesome base to go from then.
Of course this is not the AOSP. MTK does not have any AOSP ROM. Only AndroidOne device, and CM build. I'm not saying:" it's AOSP"
nikbbnik said:
Of course this is not the AOSP. MTK does not have any AOSP ROM. Only AndroidOne device, and CM build. I'm not saying:" it's AOSP"
Click to expand...
Click to collapse
can we have some more Screenshots plz??
Youps83 said:
Thanks much.
Will try this afternoon.
Click to expand...
Click to collapse
hello...did u flash it?? plz give a review
Thanks for the ROM Dude.
Does not install
hey i tried to install the Rom but it didn't installed unfortunately trying some other Rom now
Rishabhbhutoria said:
hey i tried to install the Rom but it didn't installed unfortunately trying some other Rom now
Click to expand...
Click to collapse
and how am I supposed to guess the reason? What mistakes? Logs? Errors?
nikbbnik said:
and how am I supposed to guess the reason? What mistakes? Logs? Errors?
Click to expand...
Click to collapse
True story bro
Sent from my A116 using XDA Free mobile app
@ nikbbnik
hi
it´s an excellent rom, very fluid... but i'm facing a problem with flash light. it does not works in camera and flashlight apps. i've installed other kernels, and several times cleared application data and cache...
can you help me to solve the problem...
.:zapa:. said:
but i'm facing a problem with flash light.
can you help me to solve the problem...
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/mi...crease-flash-intesity-kk-based-roms-t3104069
But I dont have problems
nikbbnik said:
Try this http://forum.xda-developers.com/mi...crease-flash-intesity-kk-based-roms-t3104069
But I dont have problems
Click to expand...
Click to collapse
thanks for your awnser, but i've installed lots of things (compatible patchs).... it started to blink after instal something but gonne again.... i restored the original stock rom and is completely dead...
any advice??
it must go to warranty............... i've no luck... f...........
.:zapa:. said:
.... i restored the original stock rom and is completely dead...
any advice??
it must go to warranty............... i've no luck... f...........
Click to expand...
Click to collapse
if stock rom have the same problem, it is most likely a hardware problem.
Restored or flashed in Flash Tool?
nikbbnik said:
if stock rom have the same problem, it is most likely a hardware problem.
Restored or flashed in Flash Tool?
Click to expand...
Click to collapse
flashed using original stuff of my clone device (not a116)
in first instalation of yours 4.4.4 rom had this problem.... i flashed again using 4.4.2 discovery rom... everything ok...
i was using phone one week, because i needed phone all week, and today i flashed again your rom.... same problem... i flashed several patchs and nothing... i tried several kernel's and after too many attempts, somewhere tried flashlight and started to blink what should not be normal... i flashed some more stuff and never worked again... flashed 4.4.2 and nothing.... so i decided to flash original rom using original software and rom files twice and nothing... now i gave up... do not know what to do more :crying::crying::crying:
I don't have signal on 2nd sim(i have Wiko Cinq Five and i live in East Europe)
Is any patch for KK,like the one for Android 4.2.x ?
Klaus69 said:
I don't have signal on 2nd sim(i have Wiko Cinq Five and i live in East Europe)
Is any patch for KK,like the one for Android 4.2.x ?
Click to expand...
Click to collapse
probably you will solve the problem replacing modem file with the original of your smartphone... you must change the file properties to rw- r- r-
.:zapa:. said:
probably you will solve the problem replacing modem file with the original of your smartphone... you must change the file properties to rw- r- r-
Click to expand...
Click to collapse
if i knew how to do that i was not askink here
Klaus69 said:
I don't have signal on 2nd sim(i have Wiko Cinq Five and i live in East Europe)
Is any patch for KK,like the one for Android 4.2.x ?
Click to expand...
Click to collapse
how you use a modem?
In other KK roms have this bug?

Fulmics Rom for D856/7/858HK ( Unofficial ) (working)

HI All D856/7/8HK Users.
1st of all, I played a bit with fulmics ROM from last 2-3 months. and patched it to work with our Dual Sim Version Devices. Thanks to @xprit for the best ROM on xDA.
I am not the owner of Fulmics ROM but only Mod developer who develops mod so that we can enjoy this ROM for our devices.
Instructions:
1) Download Fulmics Rom 5.1 from original Thread of Fumics Rom
2) Download Fulmics 5.2-5.3 OTA from download page on Fulmics Website
3) Download Sim Mod
4) Download Modem for D858HK
How to Install:
1) Put downloaded Fulmics Rom on your SD card ( do not put it into phone memory)
2) Put Downloaded files (moden + sim) into same folder.
3) go to recovery (TWRP) and backup, System, Boot, EFS and MODEM.
4) wipe Data and Cache
5) Install Fulmics Rom, it will redirect to Aroma installer and select D855 International Model.
6) once installation completed, uncheck reboot and come back to recovery and Restore Boot and Modem and Reboot.
7) once everything completed, (Phone boots up), go to recovery again and Install DUAL SIM MOD to get your signals and dual sim capabilities and flash Modem file with the link provided above.
8 ) Flash Fulmics 5.2-5.3 OTA and reboot your phone and you got Fulmics ROM on your D856/7/8HK.
Hit Thanks
Good job ?
Enviado de meu LG-D855 usando Tapatalk
Thanks,
Dryka Silva said:
Good job
Enviado de meu LG-D855 usando Tapatalk
Click to expand...
Click to collapse
Thanks
Dear Abbas,
I am newbie here. I have successfully installed the fulmics roms but i have no network signal and wifi even i did installed the sim mod and modem. Hope to hear from you.
Regards,
Dondon
Modem file link and SIM mod link are the same file
"Posted from LG G3 Dual SIM D858HK"
fulmics rom for d856/7/8858hk
kostas-k said:
Modem file link and SIM mod link are the same file
"Posted from LG G3 Dual SIM D858HK"
Click to expand...
Click to collapse
Hi!
Yah i have noticed that too! Do you have modem and sim mod to flash? any help you can assist with?
regards,
dondon
doneth12 said:
Hi!
Yah i have noticed that too! Do you have modem and sim mod to flash? any help you can assist with?
regards,
dondon
Click to expand...
Click to collapse
Because he didn't download it from my post.
http://forum.xda-developers.com/lg-g3/general/lg-g3-d858hk-flashing-fulmics-rom-5-3-t3414024
GaryFromHK said:
Because he didn't download it from my post.
http://forum.xda-developers.com/lg-g3/general/lg-g3-d858hk-flashing-fulmics-rom-5-3-t3414024
Click to expand...
Click to collapse
Dear GaryfromHK,
Thank you for your kind reply. I'll try to flash the sim mod and modem provided by you once i reached in my home and hope it will goes well.
Again, thank you guys and @xprit for making this happen to our dual sim mobile.
regards,
dondon
if you can upload modem and boot from your variant, I can add official support for it if you want.
thank you for your work:good:.Have been in trouble finding roms for D857
xpirt said:
if you can upload modem and boot from your variant, I can add official support for it if you want.
Click to expand...
Click to collapse
Dear xpirt,
Thanks for your support I really appreciated it. Kindly let me know how to upload modem and boot as I am newbie with regards to this.
Also, I have managed to install fulmics rom and after flashing the dual sim v4 I got my dual network signal back but I lost baseband like my FM radio is not functioning even I did flash the modem5_6_3. If you have any solution for this, it would be highly appreciated.
Your ROM is really awesome and if you could look and consider the following I have noticed:
FM Radio is not functioning
Getting hot for a while then It goes
When I restart my mobile it shut off sometimes
I lost signal whenever I select the both status (my phone number, model no. IMEI, etc.) of sim card but it goes back normal here’s the error message “Unfortunately, the process com.android.phone has stopped”
In view of all the above your ROM is really amazing and bring new life to our dual sim 858hk and hope you consider the above issues. Thanks for everything guys who contributed and supported us specially xpirt.
Regards,
Dondon
doneth12 said:
Dear Abbas,
I am newbie here. I have successfully installed the fulmics roms but i have no network signal and wifi even i did installed the sim mod and modem. Hope to hear from you.
Regards,
Dondon
Click to expand...
Click to collapse
GaryFromHK said:
Because he didn't download it from my post.
http://forum.xda-developers.com/lg-g3/general/lg-g3-d858hk-flashing-fulmics-rom-5-3-t3414024
Click to expand...
Click to collapse
doneth12 said:
Dear GaryfromHK,
Thank you for your kind reply. I'll try to flash the sim mod and modem provided by you once i reached in my home and hope it will goes well.
Again, thank you guys and @xprit for making this happen to our dual sim mobile.
regards,
dondon
Click to expand...
Click to collapse
heo00 said:
thank you for your work:good:.Have been in trouble finding roms for D857
Click to expand...
Click to collapse
HI guys Sim Mod link updated!! enjoy and @xpirit uploading boot and modem for you
Boot and Modem
xpirt said:
if you can upload modem and boot from your variant, I can add official support for it if you want.
Click to expand...
Click to collapse
Hi @xpirit here are the links for Boot and Modem, I dont have any issues if you make it official support. Thanks.
D856/7/8HK Boot
D856/7/8HK Modem
updated link
doneth12 said:
Dear Abbas,
I am newbie here. I have successfully installed the fulmics roms but i have no network signal and wifi even i did installed the sim mod and modem. Hope to hear from you.
Regards,
Dondon
Click to expand...
Click to collapse
please check with the updated links for D858hk Simv4
AbbasM234 said:
please check with the updated links for D858hk Simv4
Click to expand...
Click to collapse
Dear Abbas,
Thanks for your reply. Is this the same with what GaryfromHK provided in his post? If so, i have flashed this already and i got my dual network signal back and wifi. The only downside i have experienced was the following:
FM Radio is not functioning (even i flashed the modem already)
When I restart my mobile it shut off sometimes (Very seldom)
I lost signal whenever I select the both status (my phone number, model no. IMEI, etc.) of sim card but it goes back normal here’s the error message “Unfortunately, the process com.android.phone has stopped”
If happen you have solution of the above please do let me know. Again, thanks a million.
regards,
dondon
Thanks op for your hardwork
How is the ROM btw?
I installed it today and everything works ok, except Radio. I try to find the factory LG Browser, any solution? Found apk on internet but it didn't work
also the "com.android.phone" problem exists to me.. And the SIM switch button on bottom of the screen does not work.
Couldn't get this to work with the 6.0 ROM restore i was running but then used below boot and modem for the restore on step 6 and everything works fine now
AbbasM234 said:
Hi @xpirit here are the links for Boot and Modem, I dont have any issues if you make it official support. Thanks.
D856/7/8HK Boot
D856/7/8HK Modem
Click to expand...
Click to collapse
Many thanks to @AbbasM234 for this
pjonezki said:
Couldn't get this to work with the 6.0 ROM restore i was running but then used below boot and modem for the restore on step 6 and everything works fine now
Many thanks to @AbbasM234 for this
Click to expand...
Click to collapse
"everything works fine" means that Radio.app and the SIM Select button on bottom of screen works ok?
kostas-k said:
"everything works fine" means that Radio.app and the SIM Select button on bottom of screen works ok?
Click to expand...
Click to collapse
no sim select button on screen. have not looked to see if you can enable as i use Call Master to auto select sim to use based on contact.
have used notification drop down to select sim and it works.
have not tested radio.
will test when i get home

MIUI 8 Alpha ROM s6 and s6 EDGE

A rom for s6 edge and S6 is circulating over the net
https://mega.nz/#!mkV03RJB!e7VtVYiLm4o2sd5XB93VQZ6jGsnLxba0inMDQLjyF2s
I flashed this ROM onto my S6 edge 925F
Author : Unknown
The rom is smooth but some bugs i was able to see :
Camera qulity is very bad
Playstore FC
No Sim Signal
Rom was found on this page : http://www.pan115.com/file/3vRnLa6d - don't ask for source , i don't have it
Update : 13.11.2016 - Flashed the ROM and tried all available KERNELS / Constant drops in SIM signal - settings app sometimes gives FC , absolutley no Sound
Method used : Rom installed trough TWRP , flashed arter kernel then super su
Any developer interested in helping out for us to have this ROM functional for MIUI lovers ?
Join the telegram group so we can discuss in real-time :
http://telegram.me/joinchat/Crl1ekBGNZ1Oern14bghbA
can you give me the source? so everyone cant take a look at it?
xDroidZz said:
can you give me the source? so everyone cant take a look at it?
Click to expand...
Click to collapse
check your pm
Perfect rom but need türkish language support?
SM-A810F cihazımdan Tapatalk kullanılarak gönderildi
Pls fix s6 edge sound Playstore musik player and signal
Sent from my SM-N930F using XDA-Developers mobile app
can you give me the source too, thnxs...hmmm cant flash the rom,file corrupt etc......
Weird
I flashed it worked including signal but could not get root to work.
I will test and work on signal for 925f
Thank you for this
pacods61 said:
I flashed it worked including signal but could not get root to work.
Click to expand...
Click to collapse
Is sound working for you?
Yes
brujo5 said:
Is sound working for you?
Click to expand...
Click to collapse
It is i got off of it though couldnt get root even with su
When I tried it the sound did not work when we were called, we had to be reminded as on cyanogenmod, after question music I do not know at all .. After the network only jumped to jump every second, and Fingerprint sensor does not work all the time. Sorry for my English I am french using google translator.
we really need someone that knows how to fix the issues because the ROM is awesome on s6 and s6 edge ...
It would be really nice to see miui 8 on this device!!
I will redownload. The link i downloaded from gave me a rom that did not mount the correct dev block so it wouldnt flash just failed everytime 925f
Miui
jhr5474 said:
I will redownload. The link i downloaded from gave me a rom that did not mount the correct dev block so it wouldnt flash just failed everytime 925f
Click to expand...
Click to collapse
Twrp/mount/system-uncheck,installed rom.
To install the rom it is necessary TWRP custom by arter97
DamiienFR said:
To install the rom it is necessary TWRP custom by arter97
Click to expand...
Click to collapse
Thank you. Link maybe?
jhr5474 said:
Thank you. Link maybe?
Click to expand...
Click to collapse
http://arter97.com/browse/exynos7420/recovery/twrp/
can we get any sneak preview maybe short video please?
sound and signal issue rest working fine

Galaxy Alpha Kor Model Nougut Booted(Cm14.1)

Thanks to modpunk, Serenitys, and other developers, i builded cm14.1 for kor alpha and it works fine.
Great! Can you share it?
wow, it's stable for daily use?
I was looking for your thread since yesterday. any bugs? excited to try this out
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
josepmaria said:
Great! Can you share it?
Click to expand...
Click to collapse
you can find it on his androidfilehost profile, not sure if i'm allowed to share the link.
Did you face any bugs and does it support fingerprint unlock?
How did you do it?
Edit:
I'm going to try the latest build from androfilehost.
I hope the mic (in calling) is working and other basic functions. I have a G850k by the way.
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
click.here said:
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
Click to expand...
Click to collapse
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
kevkev0320 said:
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
Click to expand...
Click to collapse
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
click.here said:
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
Click to expand...
Click to collapse
It was an unofficial build, but my system is now running,
many thanks <3
I can confirm that CM14.1 works with my Korean variant G850k but the mic problem still persist from previous CM13 . I hope this could be fix and more power. You should create a new thread when everything seems to be functional so that we could also inform others and have they're feedbacks
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
do u understand dutch? can i send u a PM?
kevkev0320 said:
do u understand dutch? can i send u a PM?
Click to expand...
Click to collapse
yes I do, go ahead.
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
click.here said:
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
Click to expand...
Click to collapse
i tried, it won't go away. wasn't able to test anything tbh.
ArisRafaelli said:
i tried, it won't go away. wasn't able to test anything tbh.
Click to expand...
Click to collapse
You have to close it quickly and press next until you reach the home screen. After that just enable developer settings and it will go away.
@hdh980910 we wait for your answers.
Thanks i will go to flash cm14.1 on my alpha
Thanks i will go to flash cm14.1 on my alpha
many people in develoid cafe say kt alpha has connect out phenomenon. can you fix it?

Categories

Resources