[Q] USB Replaced, Still The Same - Android Q&A, Help & Troubleshooting

I replaced the USB module for my smartphone but the port is still not working. What may be the suspects to this problem besides the USB module?
Right now I cant even flash to stock because in download mode, the pc cant detect the phone due to this problem.

Perhaps a bad replacement? who replaced the module, a proffessional?.
Usually, USB problems rely on the drivers (bad installation) or in the USB module.
Try to check if the module is working properly.

If you hv custom recovery, you dont need dl mode to flash stock

to get files on your phone you could try using adb via wlan
Sent from my GT-I9505 using XDA Premium 4 mobile app on OmegaRom v19

i replaced it myself personally, i guess im not professional ><
I could not enter recovery, all it does is it tries to go recovery with the android mascot but then reverts back to the normal boot logo

Related

Help brick!!!

Well was trying mobile odin on my p7500
were trying P7500XWLPD_P7500DBTLP3_P7500XXLQ8_HOME.tar
pressed start and its just keeps rebooting mobile odin shows 0.3 sec a cache.ing done thing and the download mode now not recognizes USB (Tried 3-4USB) so it is not in the USB , or USB driver
Yeah I tried go to recovery mode but it shows the mobile odin 0.3 thing and reboots again
What should I do?
Any help ? Anyway to do this without otg or gtag . Noone experienced this kind of problem ?
It is not the mobile odin that made usb useless thats the cm 10.1 .
Sent from my GT-I9100 using xda app-developers app
enkhtwshn said:
Well was trying mobile odin on my p7500
were trying P7500XWLPD_P7500DBTLP3_P7500XXLQ8_HOME.tar
pressed start and its just keeps rebooting mobile odin shows 0.3 sec a cache.ing done thing and the download mode now not recognizes USB (Tried 3-4USB) so it is not in the USB , or USB driver
Yeah I tried go to recovery mode but it shows the mobile odin 0.3 thing and reboots again
What should I do?
Click to expand...
Click to collapse
My head hurts from trying to understand the above.
Let me see if I can make some sense of it:
You installed Mobile ODIN on your P7500, downloaded the ICS ROM, and tried to install it.
Apparently Mobile ODIN failed and immediately rebooted.
Now the tablet displays something about cache.img during restarts. That means that it's not totally dead, though.
You need to boot it into download mode and use PC ODIN to flash your ROM.
However, while you can get into download mode, your computer doesn't recognize the tablet.
You've tried several USB ports with no change.
You can't boot into recovery since that just gets you Mobile ODIN.
If you boot it into download mode and your PC doesn't recognize the tablet - especially if it doesn't see anything in device manager when you connect it, your cable is bad. Replace it. Then use PC ODIN to flash your ROM.
k1mu said:
My head hurts from trying to understand the above.
Let me see if I can make some sense of it:
You installed Mobile ODIN on your P7500, downloaded the ICS ROM, and tried to install it.
Apparently Mobile ODIN failed and immediately rebooted.
Now the tablet displays something about cache.img during restarts. That means that it's not totally dead, though.
You need to boot it into download mode and use PC ODIN to flash your ROM.
However, while you can get into download mode, your computer doesn't recognize the tablet.
You've tried several USB ports with no change.
You can't boot into recovery since that just gets you Mobile ODIN.
If you boot it into download mode and your PC doesn't recognize the tablet - especially if it doesn't see anything in device manager when you connect it, your cable is bad. Replace it. Then use PC ODIN to flash your ROM.
Click to expand...
Click to collapse
Well I replaced several cables no use . When I plug it in it shows me unknown device . And it doesn't recognise it.
Sent from my GT-I9100 using xda app-developers app
enkhtwshn said:
Well I replaced several cables no use . When I plug it in it shows me unknown device . And it doesn't recognise it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
you need to have the samsung usb drivers installed
download Samsung Kies and install it, it will also install the drivers

Download mode "waiting for cable + NO Recovery (Blanked)

So i was attempting to originally run a firmware through odin and had auto reboot checked when i shouldnt have.
I now have a tablet that boots up with a back light screen and functions as a normal tablet, but i now have a blank recovery
and i cannot use download mode anymore. ive tried drivers, different computer, the works. No recognition in download mode.
i do not have root and am running 4.0.4
please help :X
Hmmm.
Auto reboot shouldn't have damaged anything in particular. Its exactly as it says - whether you want the tablet to reboot after you've finished flashing a rom.
Just a few questions so that we can help you easier,
-What do you mean by a blank recovery?
-Does the tablet charge via AC? That'll determine whether it is a cable problem or whether it is something else.
Sent from my GT-P7510 using Tapatalk
Yes the tablet charges by cable. If I choose recovery option I get a back lit black screen, download mode completely unrecognizable. Currently only boots into standard android.
Sent from my LG-LS970 using xda app-developers app
younggunner said:
Yes the tablet charges by cable. If I choose recovery option I get a back lit black screen, download mode completely unrecognizable. Currently only boots into standard android.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
If u mean that u can go into download mode but can't get a PC to see the device.... I would uninstall the drivers and Odin..reboot PC and reinstall drivers and Odin. Then try. If that doesn't work try a different version of Odin and/or drivers.
I have a Q and A thread with the necessary Odin files and cwm recovery to root the p7510...there is also a link to a qbking77 video.
Good luck...
My problem is I've tried different PCs drivers and Odin files and my tablet still only says waiting for cable in download mode
Sent from my LG-LS970 using xda app-developers app
younggunner said:
My problem is I've tried different PCs drivers and Odin files and my tablet still only says waiting for cable in download mode
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
how about a different cable and keep trying different usb ports on the same computer..
Unfortunately I've tried that as well
younggunner said:
Unfortunately I've tried that as well
Click to expand...
Click to collapse
well then we're down to the old battery drain trick....its been awhile since ive had to tell somebody how to do this....so give me until tomorrow night and ill see if i can find some good links to guides for you...
in the mean time you can google battery drain, bootloader, download mode and just about every other word combination you can think of for this method.....
..... which is to drain the battery to absolute zero...take it out...put it back in...plug the device in...and before the charging screen comes on you need to boot into the bootloader...
i know...sounds crazy,but ive seen it work time and time again...now those werent the exact steps...but i thougbt you would .eed atleast some sort of over view if you are going to go google hunting with me..lol
Same problem
I've the same problem. I'm trying to install Android in a Samsung Galaxy Tab 10.1 and the download mode has "waiting for usb cable". Odin doesn't recognize it, adb doesn't either. The tablet doesn't have an OS. Tried several usb cables, computers. It doesn't have an sd card slot to install from there.
I'm really at lost here , please help

USB device not recognized Win7/8, x64/x86, OSX

Hi All,
I am having an issue with my S4 that when I plug them into my computer I get USB device not recognized. I have searched the forum for the past 2 days trying all kinds of different solutions the major one was changing my USB/charging port board on my phone.
I need to ODIN my device to an MJ7 image. At first I got the error and did a factory reset through safestrap recover. Still got the error so I did an advance wipe of every option. (Looking back shouldnt have done that) That took away my recovery, but I can get to download mode, but its not detected by my computer to use ODIN with. So I am stuck without a custom recovery without the ability to boot into anything.
Here is what I have tried so far:
1. Reinstall/uninstall drivers, reinstall/uninstall kies.
2. Changed USB ports on computer.
3. Changed USB cables
4. Changed computers from Win 8 x64 to Win 7 x64.
5. Changed computer to my MACbook using Heimdall.
6. Changed USB charging port board on my phone.
7. Tried everything again. *Still doesnt detect it*
Any ideas that I havent done already, or how to fix? I do have nandroid backup of my ROM, but dont have a custom recovery to flash it.
Cant ODIN back cause its not detected by my computer. Thanks in advance for your help.
Is USB debugging still checked on phone? You must use the USB cable provided with phone...
safestrap enabled, Hyperdrive driven
Thanks for the reply. I cant select USB debug on my phone because my phone does not boot into the main OS, it is stuck at the samsung custom padlock screen. The USB debug option was on when the OS was installed though. My phone will only boot into stock recovery and into download mode. I tried to use the original USB cable provided with the phone as I read this could be the problem, but I tried 4 other ones too and phone still gets detected as "Unknown Device" in device manager, so ODIN cant even see phone in download mode to restore. I have tried to install KIES and the Samsung Mobile phone drivers 1.5.x.x drivers. Just read somewhere where someone had this issue and installed Samsung mobile phone driver v1-4-6-0 so I am trying that now.
odlay75 said:
Thanks for the reply. I cant select USB debug on my phone because my phone does not boot into the main OS, it is stuck at the samsung custom padlock screen. The USB debug option was on when the OS was installed though. My phone will only boot into stock recovery and into download mode. I tried to use the original USB cable provided with the phone as I read this could be the problem, but I tried 4 other ones too and phone still gets detected as "Unknown Device" in device manager, so ODIN cant even see phone in download mode to restore. I have tried to install KIES and the Samsung Mobile phone drivers 1.5.x.x drivers. Just read somewhere where someone had this issue and installed Samsung mobile phone driver v1-4-6-0 so I am trying that now.
Click to expand...
Click to collapse
Tried Samsung Mobile phone drivers version 1.4.6.0 and still the same outcome "USB device not recognized". I went down to a local electronics store and bought two different brand microUSB data cables. Tried them both along with my original one from samsung, and still the same result. Any other ideas??
Anyone else have any ideas? Thinking of sending it in and having it JTAG'ed back to stock. Can anyone recommend any services? Heard mobiletechvideos is good.
odlay75 said:
Anyone else have any ideas? Thinking of sending it in and having it JTAG'ed back to stock. Can anyone recommend any services? Heard mobiletechvideos is good.
Click to expand...
Click to collapse
Go to Saferoot thread in dev forum...your answer may be there
safestrap enabled, Hyperdrive driven

[Q] micromax A52 BRICKED

USING WINDOWS 8 64BIT, when i remove battery & connect it to PC i see USB Single Port (COM21) ...ON DEVICE MANAGER ..struck with boot loop... damaged recovery when tried to install an new recovery... first camera stopped force fully, my audio failed later, wen i tried to flash another CWM recovery using MObile uncle tools it corrupted my earlier recovery..but other things working properly yesterday my mobile switched off i couldn't even charge now... When i remove battery and connect to sytem USB Single Port (COM21) detects shows any way to regain my mobile back using SP tools?? :crying:

Galaxy S3 GT-I9300 softbricked, no recovery and not connecting to pc only download mo

The problem begins when I flashed custom recovery using Flashify app on my rooted stock device. It makes device soft bricked.
and it not allowing me to go into recovery mode! But I could go through download mode easily so I tried to flash new recovery using odin. :fingers-crossed:
But when i plug phone into the usb port( tried all of them ) I realized that my pc not detecting my phone neither any sound of connecting nor any notification. I've checked many times i installed proper driver as well. I tried to check any hardware change on driver manager but nothing comes up. I tried couple of pc, windows 7 and 10, and bunch of usb cables but still no success. Please help me!
Sounds like the USB port may be damaged. Does it charge?
having the same problem :/
Nothing detects it
audit13 said:
Sounds like the USB port may be damaged. Does it charge?
Click to expand...
Click to collapse
Thanks for responding and Yes it's charging! But I don't think that usb port could be the culprit cause I can connect & use another device easily through them!

Categories

Resources