USING WINDOWS 8 64BIT, when i remove battery & connect it to PC i see USB Single Port (COM21) ...ON DEVICE MANAGER ..struck with boot loop... damaged recovery when tried to install an new recovery... first camera stopped force fully, my audio failed later, wen i tried to flash another CWM recovery using MObile uncle tools it corrupted my earlier recovery..but other things working properly yesterday my mobile switched off i couldn't even charge now... When i remove battery and connect to sytem USB Single Port (COM21) detects shows any way to regain my mobile back using SP tools?? :crying:
Related
I replaced the USB module for my smartphone but the port is still not working. What may be the suspects to this problem besides the USB module?
Right now I cant even flash to stock because in download mode, the pc cant detect the phone due to this problem.
Perhaps a bad replacement? who replaced the module, a proffessional?.
Usually, USB problems rely on the drivers (bad installation) or in the USB module.
Try to check if the module is working properly.
If you hv custom recovery, you dont need dl mode to flash stock
to get files on your phone you could try using adb via wlan
Sent from my GT-I9505 using XDA Premium 4 mobile app on OmegaRom v19
i replaced it myself personally, i guess im not professional ><
I could not enter recovery, all it does is it tries to go recovery with the android mascot but then reverts back to the normal boot logo
hi everyone.! i had a rooted vodafone smart 2 (alcatel v860) with recovery installed..one day i tried to port kitkat rom but system flash stopped in the middle of proccess and phone turned off.. now recovery and system doesnt work.. only first android image and stuck.. my pc cant recognise my device and doesnt install drivers to fix it using fastboot.. Maybe cause it hasn't got some system installed..to install drivers needs usb debugging enable but i cant without system.. any help?
Hi All
I installed a custom ROM but it was getting stuck in boot screen ,so i did a auto format flash which deleted all the data in the phone flash including bootloader using SP flash tool v3.1312.0.139 .
As I disconnected the phone from PC it got hard-bricked. Even if i connect to PC, SP flash tool is not able to recognize the gionee p2 so I cant do any thing .
can't switch on the phone and not getting recognized in PC
Is there a way to fix it or to send the rom data to the phone flash ?
type[http]://i61.tinypic.com/jr40uh.jpg
type[http]://i58.tinypic.com/2ahedsm.jpg
Note: Before the format, the phone was working fine and was detected in PC after the flash format nothing works not even
getting detected in PC.
Regards
Arhdna
arhdna said:
Hi All
I installed a custom ROM but it was getting stuck in boot screen ,so i did a auto format flash which deleted all the data in the phone flash including bootloader using SP flash tool v3.1312.0.139 .
As I disconnected the phone from PC it got hard-bricked. Even if i connect to PC, SP flash tool is not able to recognize the gionee p2 so I cant do any thing .
can't switch on the phone and not getting recognized in PC
Is there a way to fix it or to send the rom data to the phone flash ?
type[http]://i61.tinypic.com/jr40uh.jpg
type[http]://i58.tinypic.com/2ahedsm.jpg
Note: Before the format, the phone was working fine and was detected in PC after the flash format nothing works not even
getting detected in PC.
Regards
Arhdna
Click to expand...
Click to collapse
of course it'll go dead. you just removed the OS without replacing with anything. you'll either need to get the stock backup or backup a working phone using MTK droid tools then re-flash the stock backup
Hey everyone,so i had this tecno h6 mtk 6582 rooted phone,i mistakenly deleted the font folder in system,all text disapeared,now that i had enabled recycle bin in es explorer,i restored the files and tried to reboot to see if text will come back,unfortunately it never booted,its in constant boot loop,tried to factory reset in recovery mode nothing it never booted,i have tried sp flashing tool but its not working as the preloader drivers are not fully installed or need to be updated,i tried using mtk droid tools but it wont connect the phone as usb debugging is not enabled.Any help on how to flash the phone,i already have its stock rom downloaded.Thanks in advance
Same Problem
I have the same problem
boot loop.
Click to expand...
Click to collapse
Mine was cause during trying to make Mx player codec neon latest version a system app using luky patcher latest version with custom putches uptodate as of 15,06,2015. My phone hookup in the process of copying file to .../system/ so i decided to restart it by holding the power key down for aprox. 7secs. when it did restart there was and is nothing than ExperinceSMART LIFEnow The usually TECNO welcome into boot logo. Ihave tried several method using the recovery section but nothing works. Please help :crying: i have the backup.backup data after the crash here in my sd card and also a backup.backup data after a restore. Pls help:silly:
A couple of days ago I was about to flash the stock ROM from my phone using SPFT, then I innocently decided to use the Memory Test tool from it and got my phone bricked. -durp-
Now it wont boot into the system anymore, I can get on recovery mode but not Meta mode which is needed to reflash the system all over again.
I have all the drivers installed plus the correct ROM but Windows doesn't detect it when I plug the cable.