A couple of days ago I was about to flash the stock ROM from my phone using SPFT, then I innocently decided to use the Memory Test tool from it and got my phone bricked. -durp-
Now it wont boot into the system anymore, I can get on recovery mode but not Meta mode which is needed to reflash the system all over again.
I have all the drivers installed plus the correct ROM but Windows doesn't detect it when I plug the cable.
Related
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Go to recovery?
mihai666 said:
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Click to expand...
Click to collapse
I'm at the same situation, after a mistake in a TCT Bootloader: i've formatted Misc and more partitions.. and now i'm only with a android logo.
The PC recognize a "Broadcom USB wireless modem" when i connect usb and press contemporary volume-.
Recovery not start (android logo) end download mode normally procedure (volume- and power) not working.
I'd like to test to reflash recovery by Recovery Installer By Sls13 v 2.0! but the driver not run with fastboot mode.. i've tried to install ADB Sdk suite and Java Sdk.. i've the usb-driver original, but my system (win7 32bit) make identification of Smart2 as "Broadcom USB wireless modem"..
i accidentally erased boot and bootloader.nor download mode nor recovery work and my pc recognize it like Broadcom USB wireless modem.Any solution?
I have a problem with my xt615,
it started out with the bootloop problem.
after that i managed to get into flash mode (redscreen) installed the pc drivers
and tried to flash 2-3 different stock roms, and a recovery via RSD LITE version 6.
at the beginning the phone was recognized as a zeus flash device, but i changed that driver to a motorola usb device.
somehow i manage to get the phone connected in the FLASH MSM7227 but still no program can recognize it so i can flash...
since i tried to flash the recovery i cannot enter the Flash mode (red screen) and earlier, when i was trying to turn on the devices from 50power attempts 2 times it was the moto bootloop logo...
now i cannot do that...
any suggestions how to get this device flashed!?or get it into flash mode?!
all the time its blackscreen and as i enter the usb it connects to the pc depends on which mode...when i hold the powerbutton and connect it it will connect as flash device msm7227 but still...i cannot do anything via RSD LITE , also tried via adb to get it recognized. but no luck...
Help desperatly needed
Hello..
I have a Galaxy S plus (GT I9001), I installed TIGER-JELLY BEAN v8 recently, which was working fine. But phone was lagging a lot so I decided to install the stock rom again. I installed Kies(latest version) with drivers and connected my phone to my PC, but it was not detected by Odin. Every time I got Samsung Composite USB Device driver installation failed. So I searched and installed drivers from Here and Here. But they didn't worked either. I tried again after changing USB Cable but still no luck. Then I installed Kies in my Laptop and tried to connect the phone. Still it wasn't recognized.
Things were not working with downloading mode and Stock rom tar file cannot be flashed with recovery mode. So I searched a converter for .tar to flash able .zip file and found THIS . I installed this tool and tried to convert the tar file to zip. Didn't noticed that it require knowing "Mount Point", so I converted the tar file to zip without changing the mount point and copied the file to internal storage of phone and flashed the zip file. After that phone restarted , and stuck at Samsung Logo.
New I can't even to recovery Mode, nothing happens when I keep Pressing Vol Up + Power. Phone starts and stuck at samsung logo. Odin was already not detecting the phone so I tried connecting the phone on Ramdump Mode and some how drivers were installed and odin detected it correctly. But odin can't flash phone in ramdump mode so it didn't worked.
So now the problems I am facing are:
1- Phone is stuck at samsung logo, can't go in recovery mode.
2- Odin not detecting phone in downloading mode.
Is there something what I can do to fix this?
Please help!
Thank you.
Dear friends,
I have this problem: I got a brand new TCL S720 and the Google Play did not work, being a known rom issue. So, before doing anything, I've managed to make a backup of it's original rom with MTK Droid tools whichI supose it did it well. Then I've tried to install a CWM recovery to try a custom rom for it. The CWM recovery seemed to install succesfully but I didn't manage to install the new rom. If I remember well, it stucked on boot logo. Then tried to revert at it's original stock recovery, managed to have the phone back as it was in initial state, but doing more tries, It remained stucked on boot logo. The problem is that my computer doesn't recognise it anymore, when I connect it to USB it tries to install MTP usb driver but even before the driver was installed well, now it refuse to install, like the driver is not good or the proper driver doesn't exist. So the only thing I can do is to boot on stock recovery but even I tried to copy the original rom as update.zip on external SD and to flash the phone using install update from sd card in recovery mode, It doesn't find the external sd card. So I'm stuck here, the computer doesn't detect the phone to try flashing it with SP flash tool or MTK Droid tool, and I also can't flash it from sd card. Have you any idea how to make it work again?
Thanks in advance.
Hello, guys.
Recently, I've tried to root a Cubot Power 4G following a guide I found online. I probably should have been more catious about it, cause now the phone is stuck on a bootloop. I tried to install a custom recovery to try and fix this, but as there was no official twrp for Cubot, I once again downloaded something that was probably shady. Thus, now the phone is stuck on bootloop, won't access recovery mode, is now turned off because battery gave out, but if I try to connect it to the pc, it will start to bootloop again. I cannot access adb, or at the least I don't know a way to, since it keeps bootlooping and I have no way to access a recovery mode(since there's no one, or at the least, if there is, it's faulty). What can I do here?
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
jwoegerbauer said:
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
Click to expand...
Click to collapse
I did! Or so I think... The moment I connect it to the pc, it starts bootlooping and so the pc cannot actually connect there
Bootloop is a situation where you cannot get into the "normal" Android system. Take note that as soon Android logo is shown on phone's display Android kernel got successfully initialized, ADB & Fastboot are ready.