Stock device won't boot - possible power issue - PLEASE HELP! - Verizon Samsung Galaxy S 4

So I have a STOCK (no nothing) Verizon Galaxy S4 that is/was up to date as of 6/23/14. I think the last OTA push was a month or so ago.
A few days ago the device rebooted on its own a few times and I had no clue what was going on, but it stabilized for a day or so. Then yesterday it shut off and would not turn back on - the battery level was at least 80%. I removed the battery and reinserted it. I did not press the power button, but the device vibrates and displays the initial boot screen for about 3 seconds before it powers back off. At least I assume it is powered off - the screen goes black and there is no sign of life. The buttons do nothing to stir its slumber. I can remove and reinsert the battery for the same results.
I've tried POWER+HOME+VOLUME UP once inserting the battery - the blue text appears at the top but again the device shuts off after about 3 seconds.
Charger plugged in shows no light. However, when plugged in, the top part of the device does becomes warm on the screen and on the back with the cover off. - It actually becomes quite warm so I removed the battery but kept it plugged in just to test and it remained very warm. Unplugged now. Also it appears that inserting the battery does nothing now - maybe it's drained.
I'm pretty certain it's a hardware problem at this point, but I have no clue where to start. Has anyone ever had this issue or come across someone that has? I can take the device apart - does anyone know where and what I should be looking for as far as a loose connection or damaged component goes? Is there an electrical component diagram out there somewhere?
Any help is much appreciated!!

Have you tried getting into download mode at all?! I know you say that it won't go into stock recovery... But if somehow it got bricked then recovery corrupt be borked as well. Least if you can get into download mode you could try a no wipe image....
Also could just be hardware related in such case I don't have experience with that so much..
Sent from my SCH-I545 using Tapatalk

Mistertac said:
Have you tried getting into download mode at all?!
Click to expand...
Click to collapse
Yes. Same deal - it comes up for about 3 seconds... Must be a hardware issue.

tloth01 said:
So I have a STOCK (no nothing) Verizon Galaxy S4 that is/was up to date as of 6/23/14. I think the last OTA push was a month or so ago.
A few days ago the device rebooted on its own a few times and I had no clue what was going on, but it stabilized for a day or so. Then yesterday it shut off and would not turn back on - the battery level was at least 80%. I removed the battery and reinserted it. I did not press the power button, but the device vibrates and displays the initial boot screen for about 3 seconds before it powers back off. At least I assume it is powered off - the screen goes black and there is no sign of life. The buttons do nothing to stir its slumber. I can remove and reinsert the battery for the same results.
I've tried POWER+HOME+VOLUME UP once inserting the battery - the blue text appears at the top but again the device shuts off after about 3 seconds.
Charger plugged in shows no light. However, when plugged in, the top part of the device does becomes warm on the screen and on the back with the cover off. - It actually becomes quite warm so I removed the battery but kept it plugged in just to test and it remained very warm. Unplugged now. Also it appears that inserting the battery does nothing now - maybe it's drained.
I'm pretty certain it's a hardware problem at this point, but I have no clue where to start. Has anyone ever had this issue or come across someone that has? I can take the device apart - does anyone know where and what I should be looking for as far as a loose connection or damaged component goes? Is there an electrical component diagram out there somewhere?
Any help is much appreciated!!
Click to expand...
Click to collapse
If this is 100% stock phone u are looking at hardware issue of some type...
sent via safestrap 3.72 and echo v25.1! !

decaturbob said:
If this is 100% stock phone u are looking at hardware issue of some type...
Click to expand...
Click to collapse
It is and I agree. Just hoping someone on here might've seen this before and know how to fix it. I may try replacing the charging port hardware to see if that solves it.
amazon com/gp/product/B00EZ6LQ76/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2N7MOLQT42QNO

tloth01 said:
I've tried POWER+HOME+VOLUME UP once inserting the battery - the blue text appears at the top but again the device shuts off after about 3 seconds.
Click to expand...
Click to collapse
To boot into recovery you only need to hold the VOL UP+POWER. Once the phone vibrates let go of power but keep holding the up button. I let go once the blue text appears for about 2 seconds.

ckarrow2 said:
To boot into recovery you only need to hold the VOL UP+POWER. Once the phone vibrates let go of power but keep holding the up button. I let go once the blue text appears for about 2 seconds.
Click to expand...
Click to collapse
Thanks... but then it turns off after that 3rd second...

If you can't get into download mode only option left is jtag

If you don't have a warranty there are places that will jtag it. I would recommend using someone that has done it before but I would be happy to try if you want to send it to me. I have the equipment but have yet to use it. I had a hard brick and thought I was going to have to try and Jtag mine but the warranty company decided they would go ahead and replace it. Like any place else, there would be no guarantee it will work. Of course if it is a hardware issue, jtag wouldn't work.
Some repair places will test it for free. I took one in for a sound problem and wanted to check out the loud speaker. The loud speaker was fine and they didn't charge me anything.

Tulsadiver said:
If you don't have a warranty there are places that will jtag it. I would recommend using someone that has done it before but I would be happy to try if you want to send it to me. I have the equipment but have yet to use it. I had a hard brick and thought I was going to have to try and Jtag mine but the warranty company decided they would go ahead and replace it. Like any place else, there would be no guarantee it will work. Of course if it is a hardware issue, jtag wouldn't work.
Some repair places will test it for free. I took one in for a sound problem and wanted to check out the loud speaker. The loud speaker was fine and they didn't charge me anything.
Click to expand...
Click to collapse
Okay thanks! Yea, I'll see if I can figure out if it's a hardware problem or not. If not, then I may take you up on your offer.

Related

[Q] HTC Flyer Best Buy Needs Brick Repairman

Is there anybody in the community that repairs a unit that is bricked.
HTC Flyer Best Buy wi-fi version. Has revolutionary software on it.
Unit will not turn on.
Yesterday, I saw a video on YouTube about it. Is a method to back to Download mode, but I think the way to do this is not a same for all phones. There's a lot of videos on YouTube about it, and on ebay you can buy the cables or the accessories to do the job.
Hope this info help you.
Sent from my SPH-D710 using xda premium
Unit will not turn on
This is not a phone. It is the Best Buy tablet version. It won't even turn on.
Needs a good repairman
What did you do to it?
Sent from my PG86100 using Tapatalk
I wish I knew
I do NOT want to fix this myself. I have tried everything but am new to this and do not want to make things worse than they are. If I press the up and down volume at the same time, it vibrates 5 times then I get a green steady light. If I press just the up volume and hold it. It will vibrate 3 times and I get a flashing yellow or orange light. If I hold the power button for about 15 seconds it turns the light off. You can hear this connect and disconnect from the computer through the speakers. But the display never goes on. Hopefully someone knows how to fix this.
TOMAS3896 said:
I do NOT want to fix this myself. I have tried everything but am new to this and do not want to make things worse than they are. If I press the up and down volume at the same time, it vibrates 5 times then I get a green steady light. If I press just the up volume and hold it. It will vibrate 3 times and I get a flashing yellow or orange light. If I hold the power button for about 15 seconds it turns the light off. You can hear this connect and disconnect from the computer through the speakers. But the display never goes on. Hopefully someone knows how to fix this.
Click to expand...
Click to collapse
Try booting into hboot by doing holding down the volume down and power button at the same time for like 10 seconds
So many ways to boot, does not recognize them.
I described above what happens, the vol down and power do not work anymore. The power only for 60 seconds does not work anymore. I personally think the battery is dead, or the unit is in a deep sleep, or the battery charge system is disabled. But it still vibrates 5 times when I hit the vol up and down at the same time, Like I said I have spoken with HTC they do not know, (they can't tell you anything on the phone, because this has revolutionary on it) but they tell me I can get help here. So here I am. They want $290.00 to fix it. I just hope someone here can help.
TOMAS3896 said:
I described above what happens, the vol down and power do not work anymore. The power only for 60 seconds does not work anymore. I personally think the battery is dead, or the unit is in a deep sleep, or the battery charge system is disabled. But it still vibrates 5 times when I hit the vol up and down at the same time, Like I said I have spoken with HTC they do not know, (they can't tell you anything on the phone, because this has revolutionary on it) but they tell me I can get help here. So here I am. They want $290.00 to fix it. I just hope someone here can help.
Click to expand...
Click to collapse
Well what exactly happened to it in the first place? Were you flashing a ROM and something went wrong?
Unit turns off
Sure: I was having problems with the unit turning itself off for no reason at all.
Most of the times it would make it through the boot process to the home screen, wait about 30 seconds then shut down. If the unit stayed on for longer than 30 seconds it might last 1 to 5 minutes. Then out of nowhere just shut down. I could turn it on, it might do the same thing, or not even boot completely. Then I would let it charge for hours and try again. With the same results as above. So now I figure the battery is not charging. But like I said it is beyond me. For software it has HTC HC on it with revolutionary. I have reset it to factory software a few times. I hope this helps you figure what's up.
HTC said they heard of some way to turn battery charging back on, but would not give me that information. Do you think that might be the problem?
Thanks so much for the reply's. I sure am confused....
Smells like a hardware problem to me.
TOMAS3896 said:
Sure: I was having problems with the unit turning itself off for no reason at all.
Most of the times it would make it through the boot process to the home screen, wait about 30 seconds then shut down. If the unit stayed on for longer than 30 seconds it might last 1 to 5 minutes. Then out of nowhere just shut down. I could turn it on, it might do the same thing, or not even boot completely. Then I would let it charge for hours and try again. With the same results as above. So now I figure the battery is not charging. But like I said it is beyond me. For software it has HTC HC on it with revolutionary. I have reset it to factory software a few times. I hope this helps you figure what's up.
HTC said they heard of some way to turn battery charging back on, but would not give me that information. Do you think that might be the problem?
Thanks so much for the reply's. I sure am confused....
Click to expand...
Click to collapse
Just to be sure, you didn't take the HC update while running GB revolutionary s-off right? Cuz that could be a problem. But really it just sounds like a hardware issue to me. You might just have to get it fixed or get a new one :/
Found problem
Took case off using an online site that shows you how to take apart a flyer.
I wanted to get to the battery so I could "disconnect it" then connect. Hoping that would reset the circuit board and cpu. I did that but had the same issues. I then looked at the battery connector, and I noticed it was crooked. I took it off again and put it on completely straight. The minute I turned the power on it started to work like designed. The battery connection is not well designed. The wires to the connector just make it to the circuit board. So that any wire movement, and a slight drop might and probably would loosen this connection. However my connection was clearly put on slightly crooked. It worked until it needed more connection from the battery connector to the circuit board connector. The battery connector was on an angle so as not to make 100 percent connection. I would say it had about 75 percent connection. This connector has more than a positive and negative wire. There were about 5 wires on this. Probably why this unit still had life to it. It is charging much easier than it did. And it is working good so far. Thank you very much for the reply's, from the people that tried to help.

Galaxy s2 hard bricked I think

So my current phone stopped working so i was going to switch back to my galaxy s2 that has been sitting unused for about 3 months. When i tried to charged it the device will not turn on. The phone heats up when it sits on the charger for sometime. Also if i hook it up to my computer without the battery and hold the power and up/down button i can get to the warning screen about custom os to put it into downloading mode but when I press up to continue the screen just goes black and nothing happen if i press down to restart nothing happens it just goes black and i can hold the power and up/down to get back to the warning screen. The phone was rooted with iscrewd a long time ago before i when to a different phone. I have a usb jig but i cant even get to the warning screen with the battery in. Any thoughts??
You don't say, but I assume the phone was working normally when it was put on the shelf? If you can put your hands on a good I777 battery that is at least partially charged or better yet fully charged, put that in the phone and see if it will boot.
Sitting for three months will completely drain the battery, and this phone is somewhat sensitive to that. At least I have seen quite a number of reports of full discharge of the battery giving the same symptoms of not charging and getting warm.
I don't know what would account for you not being able to go beyond the warning screen with the battery out, especially if the phone was working normally before. The correct button configuration is the volume down button only, when the battery is out. I think the other buttons don't intefere though. Might try with just the vol - being held down and see what happens.
I vaguely remember someone having a problem similar to this, and I think he fixed it by getting the phone into download mode, putting the battery in, and leaving it in download mode to charge the battery. I think after a while he was able to boot the phone and let it finish charging while the phone was on.
This happened to me before. I just bought a new battery on Amazon and it worked just fine.
Sent from my Galaxy Nexus using xda premium
mvi57 said:
I vaguely remember someone having a problem similar to this, and I think he fixed it by getting the phone into download mode, putting the battery in, and leaving it in download mode to charge the battery. I think after a while he was able to boot the phone and let it finish charging while the phone was on.
Click to expand...
Click to collapse
battery does not charge in download mode. nor recovery.
Bought a new battery for it and it booted up like normal
Sent from my SGH-I777 using Tapatalk 2

Unbrick phone part: Rapidly Flashing Red Light.

Hello all.
This guide will help you if you have:
A phone that will not turn on unless you plug it in and even then only an LG sign shows up followed by either blank/ rapidly flashing red light.
to my knowledge, what happened to put the phone in this state is the battery died while you were flashing a rom or something as such and the phone got confused on if it should be in charge mode or not.
being that the phone has a sealed battery, it is not as easy to pull out the battery as it is on other phones.
Fortunately for us, it is not difficult at all to unplug the battery!
REQ: torx screw driver that will fit but NOT STRIP the screws at the bottom of the phone.
Small phillips screw driver.
**I suggest charging the phone for a good 10 minutes before starting this. just to make sure it has a charge.
Step 1: unscrew the two screws at the bottom of the phone CAREFULLY!
Step 2: with your nails carefully pry up the back cover (inspect the phone carefully and identify the back cover from the rest of the phone.) off starting from the bottom of the phone.
Step 3: peel back the blue tape on the connector and remove the two screws.
Step 4: carefully pry up the connector from the top.
Step 5: plug back in and try powering on. By this point you should know if it worked and you can start putting the phone back together.
This guide is not the best (My first) but if you have any questions send me a message.
Good luck with your phones!
One of the first official LGOG teardown! Looks easier than expected..
@exemplarmusik sent from his LG - E970 ya dig?!
Awesome job, man. should come in handy for me at some point I am sure. I am curious though, those internals look identical to the Nexus 4's (as I guess we should expect) and I know the battery is glued down with the Nexus 4, so is that the case with our LGOG as well?
Yeah. The battery is glued in. I dont see an issue replacing it though. maybe a heat gun to losen up the glue and you should be good.
And yeah, it is very easy to open up.
This would have helped me last week. Oh well, got a replacement device and a free LG headset for my trouble.
Sent from my LG-E970 using Tapatalk 2
Fission_Chipz said:
Awesome job, man. should come in handy for me at some point I am sure. I am curious though, those internals look identical to the Nexus 4's (as I guess we should expect) and I know the battery is glued down with the Nexus 4, so is that the case with our LGOG as well?
Click to expand...
Click to collapse
Yeah the name in system info is even mako just like n4
the best phone ever
drwario said:
Yeah the name in system info is even mako just like n4
the best phone ever
Click to expand...
Click to collapse
I think it would only say that if unlocked, then you have N4 bootloaders.
I had this fast flashing "brick"-like issue, but after I let my phone cool, I just held power and vol-up and my phone went straight to the boot loader.
Sent from my LG-E970 using Tapatalk 2
Damn, I didn't think it'd be that easy to take it apart. I wonder if it'd be possible to stick a Qi wireless charger pad in there, like the Nexus 4.
First of all, thanks for the guide. :good:
Here is what caused this to happen on my phone:
(black screen, flashing red light)
With phone off and charger plugged in you should be able to press power for a couple of seconds and it will show the charging progress. When you unplug the charger and press power you should see nothing unless you hold it long enough to power up the phone. Problem was that no matter how long you waited after unplugging the charger you could press power and see the progress ::what::
That causes the battery to drain, completely if left alone for a couple of days resulting in, you guessed it, black screen and flashing red light. After leaving it plugged in for 4-5 hours it regained a full charge and was fine.
This did not occur when phone was on while charging. Needless to say, I exchanged the phone. Hope this helps.
Don't assume you have any other pictures
I was considering trying to steal the signal amplifier and the filter from this and put in n4 ... and chance you got any shots of those in the optimus g ?
I still cant get mine to turn on, I unhooked the battery, still nothing. I hold the power it goes to the lg screen then nothing. I can hold power and volume up and nothing happens. Does anybody have a idea, I want my phone back.
Thanks
HELP!
My phone somehow will not turn on or charge! I have tried multiple chargers and outlets, and my phone will not charge or get the red light signaling that it is... There is no damage to the phone other than a small crack done a couple months prior. This happened very suddenly, the phone just ran out of batteries then stopped charging... is it possible to find the same battery as this and replace it?? My phone company said LG would not accept it because of the small crack on the front screen corner. Any help would be very greatly appreciated, really dont have the money to buy a phone off contract...
amazingbonz said:
My phone somehow will not turn on or charge! I have tried multiple chargers and outlets, and my phone will not charge or get the red light signaling that it is... There is no damage to the phone other than a small crack done a couple months prior. This happened very suddenly, the phone just ran out of batteries then stopped charging... is it possible to find the same battery as this and replace it?? My phone company said LG would not accept it because of the small crack on the front screen corner. Any help would be very greatly appreciated, really dont have the money to buy a phone off contract...
Click to expand...
Click to collapse
My phone is same yours. you plug and unplug somes times untill red light flash then push power button. goodluck
Wow looks like there are connectors on the back to go to the inside of the back cover... I wonder if this is compatiable with the orbe!... if not it should be easy to use old Palm Touchstone parts to make it charge wirelessly.
I have the sprint version I am hoping it has the same connectors... You guys see the two prongs on the back cover adn the metal places they attach to??
Akop87 said:
Wow looks like there are connectors on the back to go to the inside of the back cover... I wonder if this is compatiable with the orbe!... if not it should be easy to use old Palm Touchstone parts to make it charge wirelessly.
I have the sprint version I am hoping it has the same connectors... You guys see the two prongs on the back cover adn the metal places they attach to??
Click to expand...
Click to collapse
Those prongs are for connecting to the antenna in the back cover, not a wireless charger.
Sent from my Nexus 7
I could use some help guys, if this thread isn't too old. I've searched high and low to the answer here and nothing is working. I've tried download mode, fastboot, recovery, reset, holding power down, plugging it in and unplugging it. I've pulled the plate off of the battery, tried LGNPST, drivers, etc. No go on anything.
The phone is still dead, and will not turn on. The best I've gotten is a solid red light after holding the power button for 15-20 seconds. Then after about 3-5 seconds it resumes flashing (alternating between the red light and the key buttons). If I continue holding the power button down it will repeat this, showing solid red and then reverting to flashing.
I can not get the screen to display anything, not even the charging animation, and none of my computers will even recognize the device. I've been messing with it all day and I'm stuck. If anyone can help me, at all, please do. I hate going to Sprint. Anything but that, please.
thistimearound said:
I could use some help guys, if this thread isn't too old. I've searched high and low to the answer here and nothing is working. I've tried download mode, fastboot, recovery, reset, holding power down, plugging it in and unplugging it. I've pulled the plate off of the battery, tried LGNPST, drivers, etc. No go on anything.
The phone is still dead, and will not turn on. The best I've gotten is a solid red light after holding the power button for 15-20 seconds. Then after about 3-5 seconds it resumes flashing (alternating between the red light and the key buttons). If I continue holding the power button down it will repeat this, showing solid red and then reverting to flashing.
I can not get the screen to display anything, not even the charging animation, and none of my computers will even recognize the device. I've been messing with it all day and I'm stuck. If anyone can help me, at all, please do. I hate going to Sprint. Anything but that, please.
Click to expand...
Click to collapse
me too.
I was doing the LGNPST and it was stuck at 67% for 15 min so i unplugged and the phone did nothing so I turned it off from recovery and nothing. no power only the power flashes red for a few seconds after pressing.
I am out of town now but if I can get it to turn back on I will send it back since I just received it today.
Unfortunately, my phone is now completely unresponsive. I have had it plugged in to the original wall charger for over two hours and still no power. If i hold down the power button for about 15 seconds while plugged in the red light will blink once every second until i let go. However, if I unplug it and do the same the light will not come on. I'm about to disassemble my brick and see if the battery pull will help any.
Any success stories in detail would be appreciated. Plan B is to send it off to Mobiletechvideos.
Edit: Moving on to plan B....thanks.
Sent from my LGL35G using xda app-developers app
TangoXray said:
Unfortunately, my phone is now completely unresponsive. I have had it plugged in to the original wall charger for over two hours and still no power. If i hold down the power button for about 15 seconds while plugged in the red light will blink once every second until i let go. However, if I unplug it and do the same the light will not come on. I'm about to disassemble my brick and see if the battery pull will help any.
Any success stories in detail would be appreciated. Plan B is to send it off to Mobiletechvideos.
Sent from my LGL35G using xda app-developers app
Click to expand...
Click to collapse
I did this trick a couple weeks ago when my phone stopped responding. Could only get flashing light while plugged in, and no response when not plugged in. Eventually while plugged in I could get to the bootloader, but could not get to recovery. This fix worked for me, though it may not work for you. You will need a T5 torx (star) screwdriver. Good luck.

[Q] please help!

Last night i fell asleep and my phone died all the way, and now when i plug it in all i get is a lg logo then it goes away and then a dark lit up screen. ive let it charge for awhile now and i still get nothing, i cant get into cwm either.. the phone is unlocked and rooted and im running the base rom. Any help would be greatly appreciated.
Happened to me... leave it on the charger at least 3 hours and check it. The battery completely drains when you unplug the charger if you charged with the phone off. gl
Edit: If it still won't work, turn phone on and plug in charger.
Sent from my LG-E970 using xda premium
Pony Express said:
Happened to me... leave it on the charger at least 3 hours and check it. The battery completely drains when you unplug the charger if you charged with the phone off. gl
Edit: If it still won't work, turn phone on and plug in charger.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
This happened to me too. I completely drained the battery and it kept going into a loop (black screen, LG logo, battery screen). I left it plugged in and off and let it boot up.
FYI
This has happened to several people. I have confirmed through testing, even exchanging my phone 2 days ago that this is an issue created when unlocking the bootloader. Rooting does not cause it. Once the bootloader is unlocked, you can not get around this by re-locking the bootloader.
The workaround is simple. Either leave your phone on while it is charging or if you charge with phone off, unplug your charger and hit the power button- you will still see the charge animation running- this is what causes the battery to drain. All you have to do is power up the phone at least to boot then it is ok to turn off. You can confirm it worked by touching the power button again and not see the charge animation. Hope this helps.
Wow thanks so much for the reply and help! I've got it working now and I guess I'll just avoid it by not letting it die lol
Sent from my LG-E970 using xda app-developers app
well...
If you let it die all the way, its not a big deal. Plug it in, hold down the volume down button and the power button for 15 seconds, then it will work fine.
Threads like this makes this forum so great. Another potential problem to be avoided when using the phone.
Sent from my Nexus 7 using xda premium
I could use some help guys, if this thread isn't too old. I've searched high and low to the answer here and nothing is working. I've tried download mode, fastboot, recovery, reset, holding power down, plugging it in and unplugging it. I've pulled the plate off of the battery, tried LGNPST, drivers, etc. No go on anything.
The phone is still dead, and will not turn on. The best I've gotten is a solid red light after holding the power button for 15-20 seconds. Then after about 3-5 seconds it resumes flashing (alternating between the red light and the key buttons). If I continue holding the power button down it will repeat this, showing solid red and then reverting to flashing.
I can not get the screen to display anything, not even the charging animation, and none of my computers will even recognize the device. I've been messing with it all day and I'm stuck. If anyone can help me, at all, please do. I hate going to Sprint. Anything but that, please.
thistimearound said:
I could use some help guys, if this thread isn't too old. I've searched high and low to the answer here and nothing is working. I've tried download mode, fastboot, recovery, reset, holding power down, plugging it in and unplugging it. I've pulled the plate off of the battery, tried LGNPST, drivers, etc. No go on anything.
The phone is still dead, and will not turn on. The best I've gotten is a solid red light after holding the power button for 15-20 seconds. Then after about 3-5 seconds it resumes flashing (alternating between the red light and the key buttons). If I continue holding the power button down it will repeat this, showing solid red and then reverting to flashing.
I can not get the screen to display anything, not even the charging animation, and none of my computers will even recognize the device. I've been messing with it all day and I'm stuck. If anyone can help me, at all, please do. I hate going to Sprint. Anything but that, please.
Click to expand...
Click to collapse
Dude i had the same isse like your did, so i search everywhere and endup here. I'd try many think like you said, when holding volume+ and power there nothing heapen but volume down and power, or just hold the power buton there red light of front led is flashed, and ... is realy dead.
I can't go to any sevice central, coz my friend bring this telus P973 for me from another contry, and im living at the mountian lol. So im about to take it to nake and try to reset by reputing the batery. Devil beside me, i have 2 extra LG Lu6200 but 1 got broken the touch system, the other been death after i take a shower, Optimus G is using small sim and i'hv cuted it, there no other phone i can use that sim for tomorow, my girlfriend sending me some monney tomorow, and i have to meet my new boss and taking a new job that's make me traveling alot, and i don't have a laptop.
Don't know what to say when looking at the black cold silent phone i used to like most....
Some body, please help!

[Q] Motorola Photon 4G won't turn on/charge

Hi!
I've been having a little trouble with my Motorola Photon 4G this past week. So far it wasn't that bad, but it got worse during the past couple days. I've had it for about 2 years, and have to wait until February to change it. (Note: it is not, nor has it ever been rooted)
It started by just freezing and restarting at random moments. Then I had to remove the battery to restart it when it froze, because the power button wouldn't respond. It started going on reboot loops, where it would freeze, I'd take out the battery, it'd restart, and go through the restart process over and over again until the battery died. I could still turn it on. After a couple days, the battery would drain extremely quickly, to the point where to actually be able to turn it on I'd have to remove the battery, plug the phone in until the "looking for battery" icon popped up, reinstall the battery, wait for it to charge, and then turn it on.
Now, no matter what I do, it will not turn on. If I plug it in a wall outlet, it
-With the battery installed --> LED turns green, nothing pops up, power button is not responsive
-Without the battery --> Nothing happens
If I plug it in the computer, the LED turns white, but the Dual Core screen doesn't pop up. When it rarely does, it freezes there.
I have tried the whole "hold power button and volume down" (Stuck in RSD mode or something like freezes on the screen), or "hold the power button and volume up" (Fastboot freezes on the screen), and the holding the two volume keys when the Dual Core screen pops up doesn't work either.
I can't get a new contract, since I am moving away in a couple months in another country, and an US phone would be useless.
Does anybody have a solution?
Elodieme said:
Hi!
I've been having a little trouble with my Motorola Photon 4G this past week. So far it wasn't that bad, but it got worse during the past couple days. I've had it for about 2 years, and have to wait until February to change it. (Note: it is not, nor has it ever been rooted)
It started by just freezing and restarting at random moments. Then I had to remove the battery to restart it when it froze, because the power button wouldn't respond. It started going on reboot loops, where it would freeze, I'd take out the battery, it'd restart, and go through the restart process over and over again until the battery died. I could still turn it on. After a couple days, the battery would drain extremely quickly, to the point where to actually be able to turn it on I'd have to remove the battery, plug the phone in until the "looking for battery" icon popped up, reinstall the battery, wait for it to charge, and then turn it on.
Now, no matter what I do, it will not turn on. If I plug it in a wall outlet, it
-With the battery installed --> LED turns green, nothing pops up, power button is not responsive
-Without the battery --> Nothing happens
If I plug it in the computer, the LED turns white, but the Dual Core screen doesn't pop up. When it rarely does, it freezes there.
I have tried the whole "hold power button and volume down" (Stuck in RSD mode or something like freezes on the screen), or "hold the power button and volume up" (Fastboot freezes on the screen), and the holding the two volume keys when the Dual Core screen pops up doesn't work either.
I can't get a new contract, since I am moving away in a couple months in another country, and an US phone would be useless.
Does anybody have a solution?
Click to expand...
Click to collapse
Try this:
1) Power down (if not already powered off);
2) Pull the battery out;
3) Plug power in *without* putting the battery in;
4) Boot the phone.
If it does not start, we'll have to go from there. If it does start, you need a new battery.
tdhite said:
Try this:
1) Power down (if not already powered off);
2) Pull the battery out;
3) Plug power in *without* putting the battery in;
4) Boot the phone.
If it does not start, we'll have to go from there. If it does start, you need a new battery.
Click to expand...
Click to collapse
The power button is unresponsive; the LED light turns green, but the Dual Core screen doesn't appear
Elodieme said:
The power button is unresponsive; the LED light turns green, but the Dual Core screen doesn't appear
Click to expand...
Click to collapse
The light is green because it's powered and the battery doesn't need charging (not in the device). At least we have that.
Ok, this will sound stupid, but let's give it a shot:
1) unplug power;
2) remove battery (if not still removed);
3) Let it sit for a while (10 minutes would be overkill, but what the heck);
4) plug power in (not battery -- leave that out);
5) Press and hold the power and volume-down buttons for a good long time -- get a motorola screen?
If we don't get the motorola screen, could be a couple things -- screen dead? Or hardware prob (maybe the power button is dirty -- push good and hard just to be sure).
tdhite said:
The light is green because it's powered and the battery doesn't need charging (not in the device). At least we have that.
Ok, this will sound stupid, but let's give it a shot:
1) unplug power;
2) remove battery (if not still removed);
3) Let it sit for a while (10 minutes would be overkill, but what the heck);
4) plug power in (not battery -- leave that out);
5) Press and hold the power and volume-down buttons for a good long time -- get a motorola screen?
If we don't get the motorola screen, could be a couple things -- screen dead? Or hardware prob (maybe the power button is dirty -- push good and hard just to be sure).
Click to expand...
Click to collapse
The Dual Core screen comes up, with "Fastboot" in the top left corner, but it freezes on that screen
Elodieme said:
The Dual Core screen comes up, with "Fastboot" in the top left corner, but it freezes on that screen
Click to expand...
Click to collapse
i had the same issue 2 weeks ago. you need to buy a new battery as the one your using is completely drained. after that... unbrick and you should be ok.
Jonathanlc2005 said:
i had the same issue 2 weeks ago. you need to buy a new battery as the one your using is completely drained. after that... unbrick and you should be ok.
Click to expand...
Click to collapse
Silly question, but I am a noob when it comes to phones. How do I do this? I never rooted my phone
Elodieme said:
Silly question, but I am a noob when it comes to phones. How do I do this? I never rooted my phone
Click to expand...
Click to collapse
your lucky im still on the site...
heres the link
http://forum.xda-developers.com/showthread.php?t=1798145
Jonathanlc2005 said:
your lucky im still on the site...
heres the link
http://forum.xda-developers.com/showthread.php?t=1798145
Click to expand...
Click to collapse
If I have any questions, can I ask you?
Elodieme said:
If I have any questions, can I ask you?
Click to expand...
Click to collapse
im not trying to say no to be mean... i just dont have that much experience to answer all your questions you may have. your best bet is to PM the OP of that thread
Jonathanlc2005 said:
im not trying to say no to be mean... i just dont have that much experience to answer all your questions you may have. your best bet is to PM the OP of that thread
Click to expand...
Click to collapse
Okay because I'm just going to have to have everything literally spelled out for me. I wasn't exaggerating when I said I was a noob haha
As I thought, battery shot. Confuses many. So, an unbrick might not be necessary. The battery just won't even pull up the bootloader.
If you get the new battery, and you never rooted, thus didn't load the clockwork recovery hack, it should charge, and then boot might be ok. We will see, but until you see no boot at all, unbrick is the last resort since it's a slog and you're not overly experienced.
I can help, but the OP on the unbrick thread is a great help in most cases.
tdhite said:
As I thought, battery shot. Confuses many. So, an ubrick might not be necessary. The battery just won't even pull up the bootloader.
If you get the new battery, and you never rooted, thus didn't load the clockwork recovery hack, it should charge, and then boot might be ok. We will see, but until you see no boot at all, until is the last resort since it's a slog abd you're not overly experienced.
I can help, but the OP on the unbrick thread is a great help in most cases.
Click to expand...
Click to collapse
Thanks. I ordered a new battery when it started happening, so it should be in soon
tdhite said:
As I thought, battery shot. Confuses many. So, an unbrick might not be necessary. The battery just won't even pull up the bootloader.
If you get the new battery, and you never rooted, thus didn't load the clockwork recovery hack, it should charge, and then boot might be ok. We will see, but until you see no boot at all, unbrick is the last resort since it's a slog and you're not overly experienced.
I can help, but the OP on the unbrick thread is a great help in most cases.
Click to expand...
Click to collapse
it didnt charge... i tried all ways and it didnt work. it only unbricked after i bought a new battery.
Elodieme said:
Thanks. I ordered a new battery when it started happening, so it should be in soon
Click to expand...
Click to collapse
No worries -- your duty (of course) is hit the Thanks button when folks help and we get somewhere. I also fixed a couple typos in my reply (typed on a phone, and naturally ends up imperfect. Just didn't want you confused. One way or another, you can get the phone back up and running.
---------- Post added at 04:06 PM ---------- Previous post was at 03:57 PM ----------
Jonathanlc2005 said:
it didnt charge... i tried all ways and it didnt work. it only unbricked after i bought a new battery.
Click to expand...
Click to collapse
Not quite sure what you're saying, but the new battery the OP in this thread purchased should charge fine unless something is really wrong (never rooted so never loaded any charge-precluding mods).
If you are saying that on your phone, with a new battery, you still had to unbrick it because it wouldn't charge ... hmmmm ... seems very strange. Even the clockwork recovery mod would come up and then allow rebooting normally.
We'll see when the new battery comes. Hopefully no unbrick work required, just a charge.
what i am saying is that when the phone is bricked.. i mean bricked... nothing works what so ever except rsd... then thats it... it will not charge the battery. if you have a dead battery then dont expect it to charge while rsd. i needs power on the battery to allow RSD because the computer doesnt flash when the battery is dead and doesnt flash without the battery.
thus... he needs a changed battery. you could buy a seperate charger if you like... but it is much more expensive then buying a battery
Ok, I see what you're saying.
Yes, if truly bricked, it's an unbrick operation. Smells bricked, but I find it plausible the OP gets a battery with enough charge to try a boot. It is concerning we couldn't get booted on power without battery, though. That should have worked. Do it all the time working on kernel modules.
Just saying don't unbrick until trying out the new battery, the former of which the OP could do on power alone.
To qualify so no confusion -- I reboot into recovery mod without battery merely by plugin in -- so I can flash over modules. I've never been able to boot in to the OS normally without the battery in, but we still should see the moto logo.
Sent from my HTCONE using xda app-developers app

Categories

Resources