Related
hello guys,
i was flashing a rom when my sgs2 crashed and restarted. The only thing i can do right now is the download mode. I wanted to flash a new rom, but my pc doesn't connect to my device. I've tried to (re)install samsung kies, drivers from the site of samsung and drivers from xda. Nothing works. I have tried 2 diffrent laptops and usb cables, nothing. Somebody a solution?
thanks
sam5757 said:
hello guys,
i was flashing a rom when my sgs2 crashed and restarted. The only thing i can do right now is the download mode. I wanted to flash a new rom, but my pc doesn't connect to my device. I've tried to (re)install samsung kies, drivers from the site of samsung and drivers from xda. Nothing works. I have tried 2 diffrent laptops and usb cables, nothing. Somebody a solution?
thanks
Click to expand...
Click to collapse
PLease check this thread.
http://forum.xda-developers.com/showthread.php?t=1457458
If the problem still persists, then explain in depth as to what you did . Hope This Helped
I've followed the guide several times, but i can't get my device connected to odin. here is what i do: delete samsung kies, install odin, install the samsung drivers, put my phone in download mode connect it. (i have also tried to connect it and then download mode etc.).
Two things come to mind. One, the phone is borked & is a service centre job. Two, you're doing something wrong, but as we're not there with you looking over your shoulder, it's going to be nigh on impossible for anyone here to say exactly what that is.
Given you say you've tried 'everything' (and you have listed everything I normally tell people to do when they can't get their PC/Odin to recognise the phone), I don't know of any other options that anyone here can give you.
If it were me, I'd persevere & keep trying to get Odin to recognise the phone for a bit. I know you've tried different PC's, try some more. Again, I understand you've tried different USB cables, try others. There is no magic fix here.
Then I'd bite the bullet & send it into Samsung. If they end up wanting to charge you for the repair, consider having it JTAG'd. Will probably end up cheaper.
sam5757 said:
I've followed the guide several times, but i can't get my device connected to odin. here is what i do: delete samsung kies, install odin, install the samsung drivers, put my phone in download mode connect it. (i have also tried to connect it and then download mode etc.).
Click to expand...
Click to collapse
Why did you delete kies? :O . Just close the processes of kies at the time of starting odin.
Sent from my GT-I9100 using Tapatalk 2
Your post gave me a thought Krishnadusad. OP, I realise you manually installed drivers after you removed Kies from your PC which would normally work just fine 999 times out of 1000. However...Given nothing else is working, download a fresh copy of Kies from Samsung's website, reboot, install it, reboot again.
Then try Odin again, and check Windoze task manager & make sure you end task on Kies or any related processes.
Worth a shot I figure.
Install kies again and charge your mobile. Then download the stack rom from sam firmware. Beware. I suggest you flash the 4.0.3 as the 4.0.4 has brick bug. Then boot into download mode and flash the stck rom. You may want to check out the how to threads.
Sent from my GT-I9100 using Tapatalk 2
hello guys,
thanks for your help. But i wasn't able to flash so i brought it to the store, samsung is fixing it. I hope it isn't to expensive!
When you are in download mode - you are not bricked and it's 100% chance to restore your phone to full funcionality. Just read some FAQs next time
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
samsung fixed my phone for free they told me they replaced some hardware. Thank you all for helping me!
you did not try to go into recovery mode(volumeup-HOME-powerbutton) and wipe?
So I soft bricked my S II plus and I when tried to access ODIN to flash an official ROM , ODIN doesnt detect it , i've tried installing all the drivers ,changing USB cables and even pc's still it doesn't work , I got a fried to bring his S III to test with my pc and ODIN doesnt register even his device .
is there any way i can flash to stock ROM and just turn everything back to normal using CWM ? I just dont wanna root my phone no mpre
There was a reply to a thread in Q&A a couple of hours ago where someone listed the troubleshooting steps for when 'Odin doesn't work'. Search for that thread (skim similar threads in Q&A over the past 12 hrs or so), go through the steps.
MistahBungle said:
There was a reply to a thread in Q&A a couple of hours ago where someone listed the troubleshooting steps for when 'Odin doesn't work'. Search for that thread (skim similar threads in Q&A over the past 12 hrs or so), go through the steps.
Click to expand...
Click to collapse
Thanks I'l search it up , if anyone finds that post please do share it and thanks
Pretty sure it was Immortalneo, so have a look at his posts specifically; should help you to narrow it down a bit.
MistahBungle said:
Pretty sure it was Immortalneo, so have a look at his posts specifically; should help you to narrow it down a bit.
Click to expand...
Click to collapse
It was me, but it was actually you.
"To err is human, to forgive is divine"
Sent from my SGS II
Nothing seems to be working to get ODIN to detect it :/
I tried to flash ROM with CWM it just says "(bad)"
If you've tried everything (and I mean everything. Not 2 or 3 things) including trying with different PC's, without a screenshot/pic of the Odin output we'd have absolutely no idea why it's failing. However, if you'd care to give us a pic/screenshot of the Odin output when you try & flash, maybe we can figure out why.
MistahBungle said:
If you've tried everything (and I mean everything. Not 2 or 3 things) including trying with different PC's, without a screenshot/pic of the Odin output we'd have absolutely no idea why it's failing. However, if you'd care to give us a pic/screenshot of the Odin output when you try & flash, maybe we can figure out why.
Click to expand...
Click to collapse
well sorry for being a noob :/ but is this what your asking for?
Well vick...that is Download mode...
Push vol up and se if your pc sees it.
Sent from the little guy
I would have thought my post was pretty clear. You're obviously out of your depth & shouldn't be messing with your phone. What we need is a pic/screenshot of the Odin screen from your PC when it's failing like this
I just got too excited when everyone was rooting their phones , shouldn't have done it at all :/
My problem is no (yellow bar) is coming out from odin when i plug in download mode at first it could but after i formatted my phone from CWM it couldnt detect anymore , and I tried with two other laptops and even a different cable
Im so sorry to take up your time :/
(ODIN just looks like normal when i plug everything in :S)
OK. I thought Odin could detect OK but the flash was failing at that stage. So you still can't get the phone & PC to recognise each other given everything you've tried.
Honestly, I can't think of anything else you can do. I'd suggest you keep trying tho. Not a lot else you can do beyond that (Unless there's something really simple/obvious we're all missing here).
Edit -Right. List everything, and I mean everything you've tried to try and get the phone & PC to recognise each other/get Odin to work. Every single little step. Details. The more details you provide, the better the chance you get your phone fixed. The less details you provide, the less likely that is to happen.
MistahBungle said:
OK. I thought Odin could detect OK but the flash was failing at that stage. So you still can't get the phone & PC to recognise each other given everything you've tried.
Honestly, I can't think of anything else you can do. I'd suggest you keep trying tho. Not a lot else you can do beyond that (Unless there's something really simple/obvious we're all missing here).
Click to expand...
Click to collapse
This gonna sound CRAZY but I'l give it a try , maybe I reformat my pc and try again ? :3
I'l get back to you guys when I tried that?
Don't do that just yet. That's a little drastic. Read my edit to my PP first.
MistahBungle said:
Don't do that just yet. That's a little drastic. Read my edit to my PP first.
Click to expand...
Click to collapse
Ok , I have tried
-Installing Kies , samsung Usb drivers and every driver i could fine for samsung (ADB)
- I tried both ODIN v1.85 ,3.04
-different USB cables
-Diferent pc's (2 laptops)
-Friends S III ( sadly even his wasn't detected)
-Formatting every single option there was in CWM
-tried flashing using CWM (failed with installation aborted *bad*)
- I even ended Kies processor before running ODIN
- windows update
You missed:-
Different USB ports (and different USB ports on different PC's - you must use a 'mainboard' port, if you don't know what it is, Google it).
Try Odin V1.3
Have you used the USB cable that came with the phone ? Uninstall Kies. Reboot. Redownload Kies from Samsung website. Reinstall. Reboot. Run Odin as administrator in Windows (R-click the Odin .exe & choose 'run as administrator').
That's all I got given it's almost 3.30am here.
MistahBungle said:
You missed:-
Different USB ports (and different USB ports on different PC's - you must use a 'mainboard' port, if you don't know what it is, Google it).
Try Odin V1.3
Have you used the USB cable that came with the phone ? Uninstall Kies. Reboot. Redownload Kies from Samsung website. Reinstall. Reboot. Run Odin as administrator in Windows (R-click the Odin .exe & choose 'run as administrator').
That's all I got given it's almost 3.30am here.
Click to expand...
Click to collapse
ah yes i changed port to , to the back of my pc (motherboard) , yup usb cable that came with the phone and my friends one , I'l try it after I wake up , got work :3
Thank you so much for dealing with me man <3
(its 2 a.m here in malaysia hahah)
Vick4272 said:
Ok , I have tried
-Installing Kies , samsung Usb drivers and every driver i could fine for samsung (ADB)
- I tried both ODIN v1.85 ,3.04
-different USB cables
-Diferent pc's (2 laptops)
-Friends S III ( sadly even his wasn't detected)
-Formatting every single option there was in CWM
-tried flashing using CWM (failed with installation aborted *bad*)
- I even ended Kies processor before running ODIN
- windows update
Click to expand...
Click to collapse
There, your friend's SIII wasn't recognised. You wanna pay a friend a visit to use his/her pc with no kies pre-installed. You go and get it's latest version and repeat all steps.
When you say "kies processor" you mean one kies application running or all 4 that there are actually running?
Sent from the little guy
Well now I have reinstalled Kies , but this time when i plug the usb be in , I can hear my pc detecting it but ( Mobile USB Modem 1.0) fails to install in windows update .
and i've tried with my 2 other laptops without kies installed
oh and I end task for KiesPDLR.exe (said by someone in a post here in Xda)
Are you hitting 'end process tree' when you close Kies in Windoze Task Manager ? It's important anything associated w/Kies is closed, not just the main application.
I have an unrooted Samsung S3, i just received yesterday the notification of the jelly bean 4.3 update (originally ran on 4.1.2) so i went for it OTA via wifi, long story short, after download was finished and the phone automatically rebooted itself, it got stuck on samsung logo, i have waited for hours beside it (since i have modest experience about this) and finally nothing happened, so i started researching the issue, i have tried wipe data/factory resetting (didn't work) along with wipe cache partition, and no use, i have tried kies emergency firmware upgrade and initialization, but it can't see the phone in Download mode, i tried flashing the phone with Odin307 but it also cannot see my phone in Download mode, and i have heard that if the phones usb debugging was active, the phone would be seen, but i never used it, my phone was stock all the way, please help me get my phone working again.
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
andrewwright said:
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
Click to expand...
Click to collapse
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
herculese911 said:
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
Click to expand...
Click to collapse
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Brownpanda said:
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Click to expand...
Click to collapse
before the update, the charging port worked just fine, the phone was recognized in windows in device manager, and inside KIES, now both of them can't see it, so how could it be faulty?
and for the record guys, i'm not lazy, i never post a thread until i have exhausted all other researching methods
boomboomer said:
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
no its not, showing GT-I9300
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Try ODIN v1.85. It always worked fine for me, other versions don't.
Here is a compatibility list for what is worth it.
Brownpanda said:
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
Click to expand...
Click to collapse
Can you get into recovery still??
boomboomer said:
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
herculese911 said:
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
Click to expand...
Click to collapse
Thanks for sharing your experience
Hey, i have the same issue.
Can you please link me to the recovery from external sd??
Thanks.
Shahar.
I have a samsung galaxy s3 with stock firmware. I've hade a few custom roms before but put it back to stock for some reasons. But now odin does't recognize my phone. Drivers are up to date, the usb cable is the same, other phones are detected (s2 and s5). i have tried other cables including from other s3's from the box. I tried to root it from sd but still no luck, so i can't put custom rom from sd. Is there any way to put a rom from sd without rooting? it can be stock, it doesn't matter(i'm stuck with stock recovery). Also I consider myself a noob, so any explanation would be appreciated. Thank you
No, there isn't. Try another pc or resolve the usb conflict on the pc.
boomboomer said:
No, there isn't. Try another pc or resolve the usb conflict on the pc.
Click to expand...
Click to collapse
The same thing on other PC's.
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
boomboomer said:
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
Click to expand...
Click to collapse
It charges only...doesn`t connect in any way. Seems like i have to visit a service?
Same here!
Having exactly the same issue here! When connected by usb cable to the computer, theres no USB connection on the status bar. Just the ray symbol on battery to demonstrate the USB is connected.
I need to change my ROM, but even Odin didn´t recognise my phone.
Some clue?
Thanks!
Ps: sorry for my poor English....
Same Problem
I have the same problema, after the installation of the custom Rom, in about 1 week, the PC no regcognize my Galaxy S3. I have test it in another computer with another usb cable. I need help, i need to put a stock rom without odin, i have clockwormod installed.
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
jalt96 said:
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
Click to expand...
Click to collapse
Try with other port and USB cable.
Have you Degugging Android activated in Deceloppers options ?
the other day i tried for hours to get my phone recognised. what did it in the end was trying it on a different pc and it worked
KeTuRr74 said:
Try with other port and USB cable.
Have you Degugging Android activated in Deceloppers options ?
Click to expand...
Click to collapse
I have already tried with every port on my PC. I'm using the USB cable that actually came with the device and it is working when I plug in another phones.
And yes, I have activated USB debugging
sosolid4u09 said:
the other day i tried for hours to get my phone recognised. what did it in the end was trying it on a different pc and it worked
Click to expand...
Click to collapse
The thing is that my phone is the only one that do not get detected every single time I connect it. I have already connected one GT-I9100 and GT-S6790L and both get detected. I already tried on 3 different Virtual Machines with Windows XP, Ubuntu, Windows 8.1 but no luck.
As I said in the first post, I think it's a firmware problem since it appeared when I did the official update, which was this one:
Model GT-I9300
Model name GALAXY S III
Country Argentina
Version Android 4.3
Build date Wed, 05 Nov 2014 20:33:08 +0000
PDA I9300UBUGNK1
CSC I9300UVOUGNK1
MODEM I9300UBUGNK1
jalt96 said:
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
Click to expand...
Click to collapse
I can see your frustration Now a few things technically it is a misconception that you need root to flash a custom rom you can actually flash a custom recovery with Odin full wipe and then flash a custom rom from custom recovery (only thing is you will lose all your data because you need root to back up your data)
Now I know the above statement is not very helpful because as you said Odin doesn't detect it (but I thought I would mention it anyway )
The reason framaroot and towelroot, didn't work is because at the moment the only way to root S3 is with Odin.:crying:
You may have tried this but I will mention it anyway first uninstal Kies and all Samsung drivers from your computer ( kies can interfere with Odin) Then try installing these drivers here >> http://developer.samsung.com/techni...Lhp1GqlWRy92Q60CX6PP1mF!80806326?v=T000000117 << If you have tried this then sorry.
Also when you connect the phone go to Device manager in Windows and try to look for your device ( it may say unkown device) it should have a warning triangle right click on it select update driver software and then select browse from my computer and point to the drivers that you have downloaded see if that works.
Another thing to note is if you are using Windows 8 you need to disable Driver signature in start up options ( Google it) for Windows to recognize the drivers.
tallman43 said:
I can see your frustration Now a few things technically it is a misconception that you need root to flash a custom rom you can actually flash a custom recovery with Odin full wipe and then flash a custom rom from custom recovery (only thing is you will lose all your data because you need root to back up your data)
Now I know the above statement is not very helpful because as you said Odin doesn't detect it (but I thought I would mention it anyway )
The reason framaroot and towelroot, didn't work is because at the moment the only way to root S3 is with Odin.:crying:
You may have tried this but I will mention it anyway first uninstal Kies and all Samsung drivers from your computer ( kies can interfere with Odin) If you have tried this then sorry.
Also when you connect the phone go to Device manager in Windows and try to look for your device ( it may say unkown device) it should have a warning triangle right click on it select update driver software and then select browse from my computer and point to the drivers that you have downloaded see if that works.
Another thing to note is if you are using Windows 8 you need to disable Driver signature in start up options ( Google it) for Windows to recognize the drivers.
Click to expand...
Click to collapse
I already tried uninstalling Kies and Samsung drivers. Also I tried looking for device on Device Manager but it does not appear when I plugin my S3, but it does appear when I connect other devices like S2 or Galaxy Fame Lite. They appear as portable devices.
I'm using Windows 7 on my PC and have already tried with different OS over Virtual Machines and still doesn't work.
And thanks for that note, didn't know there was possible to flash a Custom Recovery without root, but I can't since ODIN doesn't detect device :crying:
Then it looks like you are running out of options I would use another computer not Virtual Machines
Okay I'll give it a try but as I said before, looks like an firmware issue, not computer's. Why would my computer detects two another Samsung devices but not mine (which used to work until last update)
Me, too!
I'm having a similar problem. Last week my GS3 stopped working, and I bought another one from Ebay with a cracked screen and swapped out motherboards. The phone seems to work as well as a stock Verizon phone on Jellybean would, but I can't get my Linux, Win 8, or Win XP computers to even recognize that it's attached. Different cables, each and every one of the USB ports, not even a blip. Device Manager in Windows doesn't even see it, and yes I got the developer options unlocked and have enabled USB debugging.
I've got the Samsung drivers installed, and tried to install the CWM device drivers from the SAMSUNG GALAXY S3 TOOLKIT V9, but there was an error and that didn't work, either.
USB connection issues are usually due to Windows conflicts, driver problems or the lead itself. If all these have been excluded then you have either a firmware issue in the bootloader, which is very uncommon, or a hardware problem. The usb port is easily worn/damaged/dirty also the motherboard might be the cause.
There is no silver bullet to cure, test each possible thoroughly.
boomboomer said:
USB connection issues are usually due to Windows conflicts, driver problems or the lead itself. If all these have been excluded then you have either a firmware issue in the bootloader, which is very uncommon, or a hardware problem. The usb port is easily worn/damaged/dirty also the motherboard might be the cause.
There is no silver bullet to cure, test each possible thoroughly.
Click to expand...
Click to collapse
I'm 100 percent sure that it is not due a Windows issue, I have already test every option. I have not considered the usb port to be damaged or worn, which could be possible but phone charges every time I connect it to computer. It just does not get detected as a device. But in order to assume it is a motherboard issue I will have to put away my feeling that the problem is caused by last OTA official update, since this problem started there.
If it is a firmware update issue, is it any option to flash another ROM?
Sent from my GT-I9300 using XDA Free mobile app
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
peter wagih said:
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
Click to expand...
Click to collapse
Sorry but the only option that works to root the S3 international is Odin no apps work at the moment:crying:
tallman43 said:
Sorry but the only option that works to root the S3 international is Odin no apps work at the moment:crying:
Click to expand...
Click to collapse
no man how is it ?? believe me it works try frameroot.apk
peter wagih said:
no man how is it ?? believe me it works try frameroot.apk
Click to expand...
Click to collapse
Not on I9300 international version on other variants yes. Believe me if it worked it would be all over the forums post a link showing who it as worked for thanks..
peter wagih said:
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
Click to expand...
Click to collapse
As I said on previous posts, I have already installed and reinstalled Samsung USB drivers and made a factory reset -one from config. option and another one from Android stock recovery 3e (since I cannot install any advanced recovery -or even root it- to flash a custom rom). Doing those factory reset did not downgrade my last firmware update (when all my problems started).
I also said on previous posts that I tried towelroot and framaroot with no success. As tallman43 says, seems like international version of S3 does not support those kind of one-click to root apps.
-----------------------------------------------------
So far the only options available (if my theory about latest firmware update is the problematic one) are:
● downgrade firmware: [Q] How? Odin is not working since my phone does not get detected;
● root my phone in order to install an advanced recovery and flash a new ROM: [Q] Any way of rooting phone without computer (apart from towelroot or framaroot because I have tried and do not work for me)? I read one XDA post from 2 years ago to root S3 via console apk but latest comments assumes that method stopped working.
● install an advanced recovery without odin or root: [Q] How?
● fix USB firmware issue: [Q] I have completely no idea how to do it. (Already played with *#7284# and *#0808# but did not get my phone detected)
Please I need help, this is really irritating me and I am running out of ideas
Sent from my GT-I9300 using XDA Free mobile app
I guess I have found out what the problem was. It was not firmware (as I thought). It was the micro USB port (as boomboomer said) which seems to not be firmly attached to the PCB. AC charging just seems to work okay, but not USB connections. I managed to figure it out by forcing the USB in a specific position to get it detected for 5 seconds, but then it disappeared.
Yeah, it was not as complex as I thought! I will try to replace that micro USB port as soon as possible, thanks everyone for your help!