[Q] Heartbleed update - remove root? - HTC Desire X

Hello!
A few weeks ago, HTC sends me an update to fix the Heartbleed Bug from Android 4.1. On my device I have root and Xposed. If I install the update, would it remove my root and Xposed? It's my first Android Update after rooting
Thanks,
Weely_XD

I think you have to go back to full stock (Rom,recovery,bootloader locked) to update, so yes update remove root.

Could someone that installed this confirm if root was lost or not?
Thanks!

I will not be changed

romy25 said:
I will not be changed
Click to expand...
Click to collapse
of course not, but what about your phone, LOL

Well, I went ahead and installed the stock recovery and this OTA-update.
Everything seemed fine so I re-installed a new copy of TWRP (same version number as I had before)... Confused me totally. It was asking me to root again as soon as I quit recovery, which I did a few times... But I could never finish the installation of SuperSU. It always failed...
I was messing around with this for 2 days, until I for some reason tried to install TWRP from another "old" file I found on my computer (the exact same file I used when i rooted my phone the first time).
Now everything worked fine...
I guess the other recovery image was corrupt, incorrect, or something else...
Well, the mess was sorted out at least, and I still have root, did not have to reset my phone, and everything else seems to be OK.
Thanks! :good:

Related

Can we install 4.5.145 OTA

https://doc-0k-1o-docs.googleuserco...009/*/0BzrP5DWIlpplYjFOY1MwOXFNLWc?e=download
here is the ota zip
if we flash this can we flash 4.5.141 with rsd?
any answers?
I wouldn't count on it. The ZIP seems to contain what looks like the bootloader, or at least a piece of it (ap20bl.img). Who knows what might happen after that. Motorola said a downgrade is not possible.
I would just wait for the .145 fruitcake. Then switching back and forth should be safe and painless.
ok thanks for answer
Installed 4.5.145 for fun
blttalas said:
ok thanks for answer
Click to expand...
Click to collapse
I wanted to see for myself the GPS improvements made in the update and sacrificed losing SU/root access to the phone. The update installed without a hitch and left all my apk installed apps alone. I had a handful of apps that required root (e.g. Dropbear II, busybox, Superuser, root explorer, and seeder) and will just wait until someone figures out a new method to regain access again.
sn0wba11 said:
I wanted to see for myself the GPS improvements made in the update and sacrificed losing SU/root access to the phone. The update installed without a hitch and left all my apk installed apps alone. I had a handful of apps that required root (e.g. Dropbear II, busybox, Superuser, root explorer, and seeder) and will just wait until someone figures out a new method to regain access again.
Click to expand...
Click to collapse
Did you do this via the standard update or by flashing that zip yourself?
vikingarcher said:
Did you do this via the standard update or by flashing that zip yourself?
Click to expand...
Click to collapse
Standard
Su ota survival
Has anyone tried to install the update after activating the superuser ota survival option
Root after sys 4.5.145 update?
fdaconta said:
The traditional preinstall method should still work. No wiping happens with that. I used it back when I first rooted my phone, everything stayed exactly as it was (all stock) except I had root too.
Click to expand...
Click to collapse
This response is from the developer thread. I would respond there but the policy for members with less than 10 posts is silly.
None of the existing preinstall methods (e.g. atrix-4g-moto-fastboot or superoneclick 2.3.3) work with 4.5.145.
sn0wba11 said:
Standard
Click to expand...
Click to collapse
Interesting. I tried it with my stock ROM that is rooted and unlocked -- ended up with a boot loop. Decided to flash a new ROM, so switched to the CM10 ROM. That seems to be working well and I think I will just not worry about this update for now.
vikingarcher said:
Interesting. I tried it with my stock ROM that is rooted and unlocked -- ended up with a boot loop. Decided to flash a new ROM, so switched to the CM10 ROM. That seems to be working well and I think I will just not worry about this update for now.
Click to expand...
Click to collapse
Came across a link at Android Central that used Voodoo OTA RootKeeper to restore --> Forgot I installed this awhile back; reinstalling app restored my superuser access
Re-rooted 4.5.145 after OTA
I successfully re-rooted mine last night using the pre-install method.
Read my topic here:
http://forum.xda-developers.com/showthread.php?t=2153422
From 141, to 145, back to 141.... and finally ended up with a working (and rooted) 145.

Pantech Flex Jelly Bean Released!

Just got to know that Pantech has released the much awaited Jelly Bean 4.1 for the Flex through OTA AT&T software update.
Like many others, I'm using the flex outside US, therefore, cannot update my flex.
Would request someone to upload the OTA JB zip file.
Can't wait to see Jelly Bean on the Flex.
PS: Check out the Pantech website for this great news
This is good news. I wish I wasn't rooted with CWMR so I could get this. Tried flashing stock recovery.img and boot.img files but get NOT SUPPORT.
Anyone know a way to get this phone back to complete stock so we can get the Jell Bean goodness?
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Tersanyus said:
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Click to expand...
Click to collapse
Can you upload the update file?
How did you unroot?
Sent from my PantechP8010 using xda app-developers app
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
---------- Post added at 01:09 PM ---------- Previous post was at 12:52 PM ----------
I knew from experience I had to go to stock recovery and unroot to update.
I flashed a stock rooted nandroid backup I had made after rooting initially.
To unroot I think I went into the SuperUser app and choose option to unroot.
Stock recovery file is posted in a thread here somewhere, had recovery.img and boot.img.
Tried flashing those in fastboot but only got NOT SUPPORT mesage.
I took a flashable zip file that had CWM recovery.img file in it and replaced it with the stock recovery.img and flashed it in CWM.
Once stock recovery was on the phone when I tried to use it I only got a little android symbol lying on its back with a red exclamation point.
Phone booted fine and worked ok
Couldn't get it to see the AT&T update until this morning.
Things I have noticed in this new Jelly Bean build for our little Flex:
Of the stock AT&T apps only 3 I could disable (ugh), why no Disable button
good news
Tersanyus said:
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
Click to expand...
Click to collapse
Basically you will find the update in the /cache folder.
I'm not sure if you you can access this folder without being rooted. You can give it a try using the ES File Explorer.
Let me know if you get the update.
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Oh that's bad!
Actually, there's another way. If you can share your system nandroid backup, maybe that can help.
Try Rooting
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Why dont you try to root with this method http://forum.xda-developers.com/showthread.php?t=1886460 ,its the same you used to root 4.0.4 I guess, should work, pull out the update and then unroot the phone as you dont want it rooted.
It happened to me, even rooted I wanst able to see /data content with ES File Blablabla, then tried with root explorer and worked fine.
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Thanks for your help
Tersanyus said:
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Click to expand...
Click to collapse
Well, thanks for the file, I'm outside US and even on stock, update notification doesn't prompt.
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Wait...
kneemeister said:
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Click to expand...
Click to collapse
I can see ATT's software updater sucks, we just can wait for our friend's upload.
Here it is: Link removed, Dropbox suspended it.
That should be a stock but rooted rom. Nothing else done to it at all. At least. I had that on the phone for a while as a backup when I was playing with roms for the flex.
Probably only going to leave this link up for a day. I'd make your own nandroid backup first. You'll probably get an md5 error in CWMR but there are instructions for fixing that around. I think it was ADB commands that had to fix it. I know the instructions for clearing the md5 error are in one of the flex rom threads, not that there were many of those. The standard disclaimer applies, if this nandroid backup bricks your phone, I can't help you.
I got the same previous session message too. Then it said no update after wiping. I think the best thing is just wipe and don't check for updates. Leave phone on, wifi on and wait for the phone to check on it's own. I got the prompt in a few hours.
Hope this helps you.
So, need to flash stock recovery after restoring nandroid correct?
Sent from my PantechP8010 using xda app-developers app
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Still waiting
Tersanyus said:
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Click to expand...
Click to collapse
Im on stock and I cant update, no root, stock recovery, Ive been waiting for the update and nothing.
I dont know if is because Im outside US
I got mine back to stock and unrooted, but the upgrade still fails at about 25% and reboots. If I clear cache and wipe, it will download again, then fail again. Even after flashing back to stock, recovery still says rooted and so does the software upload screen. But I have confirmed that I am no longer rooted. I am about to give up.

[Q] Removing Root to do OTA Lolipop?

As per the title, I read something somewhere to the effect that from here on out, OTA updates will fail on most phones if they have been rooted, and this seems to be true for the Z Ultra GPE. So, what changed when I rooted my phone, and how do I undo it so that I can do the OTA update? I have looked through the forum, but nobody seems to answer it. I am rooted with Supersu using the Towelroot method. I am hoping to not have to unlock the bootloader or anything, just want to do this the official way. (I did backup my TA partition though).
jeraldjunkmail said:
As per the title, I read something somewhere to the effect that from here on out, OTA updates will fail on most phones if they have been rooted, and this seems to be true for the Z Ultra GPE. So, what changed when I rooted my phone, and how do I undo it so that I can do the OTA update? I have looked through the forum, but nobody seems to answer it. I am rooted with Supersu using the Towelroot method. I am hoping to not have to unlock the bootloader or anything, just want to do this the official way. (I did backup my TA partition though).
Click to expand...
Click to collapse
If your GPe is rooted only, the OTA should install just fine. If you made any system changes, you'll need to revert those though. I ran the OTA while I was rooted and didn't have any problems.
Visa Declined said:
If your GPe is rooted only, the OTA should install just fine. If you made any system changes, you'll need to revert those though. I ran the OTA while I was rooted and didn't have any problems.
Click to expand...
Click to collapse
Not so. See:
http://bgr.com/2014/11/14/android-5-0-lollipop-updates-and-root/
As mine is rooted, no dice, the OTA fails. So, how to unroot it so that the update takes?
jeraldjunkmail said:
Not so. See:
http://bgr.com/2014/11/14/android-5-0-lollipop-updates-and-root/
As mine is rooted, no dice, the OTA fails. So, how to unroot it so that the update takes?
Click to expand...
Click to collapse
well at the moment that doesn't effect the GPe, and may never. There will have to be a system image flashed to put the block device in a known state before the new way could ever be used, and if there is a system.img we can always flash that to get the OTA to work... no big deal I don't think.
jeraldjunkmail said:
Not so. See:
http://bgr.com/2014/11/14/android-5-0-lollipop-updates-and-root/
As mine is rooted, no dice, the OTA fails. So, how to unroot it so that the update takes?
Click to expand...
Click to collapse
First of all, BGR is a garbage site, and I wouldn't believe anything they say, ever. Second, that article is talking about avoiding root AFTER Lollipop is installed.
Having root will not cause the OTA to fail. If your OTA is failing, it's because you made a system change on your device.
*edit
If you were using Xposed, then that is more than likely why your OTA is failing.
What is Xposed? How would I check to see if it has affected my device? Only thing I did was Towelroot and running SuperSU. I may have done something to allow writing to the external SD card, but forget how I did that. I was intentionally trying to keep this phone basically stock so that it would easily update to Lolipop. I did a Titanium backup to the externalSD card and reset it to factory and the OTA update still fails though. I assume this was due to the fact that I rooted it. The bootloader is still unmodified, secureboot is still green - yes, lock state is locked. Only other thing I can think of is I installed an app that allowed me to set permissions by app (turn off location settings by app, etc) Sorry I can't give any more details than that...
jeraldjunkmail said:
I may have done something to allow writing to the external SD card, but forget how I did that.
Click to expand...
Click to collapse
jeraldjunkmail said:
Only other thing I can think of is I installed an app that allowed me to set permissions by app (turn off location settings by app, etc) Sorry I can't give any more details than that...
Click to expand...
Click to collapse
If you can't figure out what system change you made to your phone, just factory reset it, and run the OTA again. There was multiple people(me included) that took the OTA successfully, our phones were rooted and SuperSU was installed.
Visa Declined said:
If you can't figure out what system change you made to your phone, just factory reset it, and run the OTA again. There was multiple people(me included) that took the OTA successfully, our phones were rooted and SuperSU was installed.
Click to expand...
Click to collapse
As mentioned before, I factory reset this and wiped the cache from the stock recovery mode. Update won't take, stops shortly after it fails with "system update error". Since my last reset (been done a few times) it won't prompt me to get the OTA update, after my last reset last night. Any help is appreciated. Thanks!
{Damn thing won't work... (*&^&%^$$#}
jeraldjunkmail said:
As mentioned before, I factory reset this and wiped the cache from the stock recovery mode. Update won't take, stops shortly after it fails with "system update error". Since my last reset (been done a few times) it won't prompt me to get the OTA update, after my last reset last night. Any help is appreciated. Thanks!
{Damn thing won't work... (*&^&%^$$#}
Click to expand...
Click to collapse
The only fail-safe way I can see is to:
root
back up TA
unlock BL
hotboot custom kernel with recovery
flash 4.4.2
OTA to 4.4.3
OTA to 4.4.4
root and restore TA if you want a working camera
OTA to 5.0
blueether said:
The only fail-safe way I can see is to:
root
back up TA
unlock BL
hotboot custom kernel with recovery
flash 4.4.2
OTA to 4.4.3
OTA to 4.4.4
root and restore TA if you want a working camera
OTA to 5.0
Click to expand...
Click to collapse
As often happens, I sometimes see a solution I don't care to implement and begin to procrastinate. So, haven't looked at this problem for a while. I may have found the solution to my problems, but want to know if anyone has experience with it before proceeding. I re-installed superSU and went through the options. Buried in the options list is a box that offers "Full unroot, Cleanup for permanent unroot". What happens when I do this? does it just remove superSU or does it restore the phone back to factory status, before it was rooted? Thanks!
PS: @ blueether the solution is fine and I am sure it would work (I was going to go ahead with it until I saw that option in superSU), but have been hesitant to unlock the bootloader, etc, due to my unfamiliarity with hacking Sony products, and only want to do it as a last, final, no other option solution. Thanks for your help!
jeraldjunkmail said:
As often happens, I sometimes see a solution I don't care to implement and begin to procrastinate. So, haven't looked at this problem for a while. I may have found the solution to my problems, but want to know if anyone has experience with it before proceeding. I re-installed superSU and went through the options. Buried in the options list is a box that offers "Full unroot, Cleanup for permanent unroot". What happens when I do this? does it just remove superSU or does it restore the phone back to factory status, before it was rooted? Thanks!
PS: @ blueether the solution is fine and I am sure it would work (I was going to go ahead with it until I saw that option in superSU), but have been hesitant to unlock the bootloader, etc, due to my unfamiliarity with hacking Sony products, and only want to do it as a last, final, no other option solution. Thanks for your help!
Click to expand...
Click to collapse
That's fine and I take no offence at you not wanting to unlock the BL.
I haven't tried the full unroot option in supersu so I'm not sure what the outcome is. One of the other GPe users care to comment?
Well, turns out that the solution to unrooting the phone is to install superSU and than look inthe settings. It will offer you an option to completely uninstall root. It did what it says, and than you can check it with a check root app from the market. It reports that the phone is not rooted. Now the question is, will it pick up the OTA update... No luck with that after a clean factory reset, so not sure what to do next.
2 questions: If I unrooted my phone, and it says it is unrooted, is this true, in the fullest extent? Does towelroot do anything more than adding some permissions ans the superuser file?
If the phone won't pick up the OTA update, why? What went wrong?
Thanks!
jeraldjunkmail said:
Well, turns out that the solution to unrooting the phone is to install superSU and than look inthe settings. It will offer you an option to completely uninstall root. It did what it says, and than you can check it with a check root app from the market. It reports that the phone is not rooted. Now the question is, will it pick up the OTA update... No luck with that after a clean factory reset, so not sure what to do next.
2 questions: If I unrooted my phone, and it says it is unrooted, is this true, in the fullest extent? Does towelroot do anything more than adding some permissions ans the superuser file?
If the phone won't pick up the OTA update, why? What went wrong?
Thanks!
Click to expand...
Click to collapse
It sounds like the OTA is not being pushed at the moment/anymore. You could copy it to there the recovery can see it and manually install it
blueether said:
It sounds like the OTA is not being pushed at the moment/anymore. You could copy it to there the recovery can see it and manually install it
Click to expand...
Click to collapse
Can you point me inthe right direction for instructions on this process? Thanks!
Visa Declined said:
First of all, BGR is a garbage site, and I wouldn't believe anything they say, ever. Second, that article is talking about avoiding root AFTER Lollipop is installed.
Having root will not cause the OTA to fail. If your OTA is failing, it's because you made a system change on your device.
*edit
If you were using Xposed, then that is more than likely why your OTA is failing.
Click to expand...
Click to collapse
Your post is two years ago but i think you can help me,there is a new update for my phone and i am rooted i also have xposed installed so this mean i cannot update my sytem? Do i need to uninstall xposed? Im on stock rom and with TWRP recovery it would be a big help if you reply thanks.

Well AT&T fnally pushed out the 4.4.4 update

If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.

Z3v 5.1.1 Full Root

I was able to accomplish a Full Root on the latest OTA update on the phone.
Previously I was running Stock 4.4.4 KitKat with SuperSu and had issues with the OTA, since I had removed Apps.
I installed the Stock 4.4.4 ftf to the phone using the flashtool.
Then was successful in receiving the Prompt to update.
After Update, I installed. "Kingroot" for android. just google it. NOT KINGOROOT or any other.
After running kingroot, King User was installed.
In my experience, no other root method will achieve full root. I was not happy with using Kinguser, since i was a Supersu fan. But anytime I successfully removed kinguser, to swap for Supersu, I had lost partial root access, and could not uninstall apps. I could only Freeze.
I also tried Superuser, but only kinguser allowed me to fully uninstall bloatware, and other apps from the phone.
Just thought I would share.
Thanks, Iambedook. Every experience helps. Kingoroot got me into trouble once before in the past.
Can you flash back to 4.4 from 5.1.1?
iambedook said:
I was able to accomplish a Full Root on the latest OTA update on the phone.
Previously I was running Stock 4.4.4 KitKat with SuperSu and had issues with the OTA, since I had removed Apps.
I installed the Stock 4.4.4 ftf to the phone using the flashtool.
Then was successful in receiving the Prompt to update.
After Update, I installed. "Kingroot" for android. just google it. NOT KINGOROOT or any other.
After running kingroot, King User was installed.
In my experience, no other root method will achieve full root. I was not happy with using Kinguser, since i was a Supersu fan. But anytime I successfully removed kinguser, to swap for Supersu, I had lost partial root access, and could not uninstall apps. I could only Freeze.
I also tried Superuser, but only kinguser allowed me to fully uninstall bloatware, and other apps from the phone.
Just thought I would share.
Click to expand...
Click to collapse
I'd love to try this, but I'm kinda unwilling/aprehensious to take the chance with rooting apps. Can you confirm that you can use flashtool to revert back to 4.4? I just know Verizon would block such a thing in an update, they can be jerks. (like the moto razr maxx hd) Any insight is appreciated.
Astoras said:
I'd love to try this, but I'm kinda unwilling/aprehensious to take the chance with rooting apps. Can you confirm that you can use flashtool to revert back to 4.4? I just know Verizon would block such a thing in an update, they can be jerks. (like the moto razr maxx hd) Any insight is appreciated.
Click to expand...
Click to collapse
Yes, you can revert back to 4.4.4 through Flashtool. Doing so though, you will not have Advanced Calling or the refreshing Lollipop UI. Also, unless you do something about it, you will be promptly reminded all the time to update to 5.1.1.
GigaSPX said:
Yes, you can revert back to 4.4.4 through Flashtool. Doing so though, you will not have Advanced Calling or the refreshing Lollipop UI. Also, unless you do something about it, you will be promptly reminded all the time to update to 5.1.1.
Click to expand...
Click to collapse
Giga,
If I use this method to root 5.1.1., can I install dual recovery and Camera 2 and the FM tuner app? I'd also like the updated flashlight you put together but don't see that as a separate install. Should I wait or go ahead with this method for root?
Thanks, Pat
pvcdroid said:
Giga,
If I use this method to root 5.1.1., can I install dual recovery and Camera 2 and the FM tuner app? I'd also like the updated flashlight you put together but don't see that as a separate install. Should I wait or go ahead with this method for root?
Thanks, Pat
Click to expand...
Click to collapse
You may root, but I would advise against anything else. the Z5 Camera is most likely not compatible for our phones on 5.1.1, and neither is the FM Tuner. It's a whole lot I can't touch base on yet.
Astoras said:
I'd love to try this, but I'm kinda unwilling/aprehensious to take the chance with rooting apps. Can you confirm that you can use flashtool to revert back to 4.4? I just know Verizon would block such a thing in an update, they can be jerks. (like the moto razr maxx hd) Any insight is appreciated.
Click to expand...
Click to collapse
I was able to flash back to 4.4.4 after i messed things up, but after going back to 4.4.4 i am struggling to get back to 5.1.1. The updates are not appearing, stating I am at the latest version.
I would also like a confirm if this. Because I'm sitting around and waiting for a rooted 5.1.1 copy for the phone. Im on 5.0.2 right now and all is working good but still waiting. Thanks all.
I'm going to see if I can root after upgrading to 5.1.1, but I have the stock firmware just incase.
Just uploaded a rooted twrp backup with real superuser ++++much more
Tigerhoods said:
Just uploaded a rooted twrp backup with real superuser ++++much more
Click to expand...
Click to collapse
Wow!!! That sounds great, thanks Tiger
thals1992 said:
I'm going to see if I can root after upgrading to 5.1.1, but I have the stock firmware just incase.
Click to expand...
Click to collapse
Just an FYI, after I needed to revert to 4.4.4. I was struggling to receive updates to get back to 5.1.1. I had to use the Flashtool, 3-5 times to get the correct update prompts to appear. If anyone else had similar issues when reverting back, let me know, but re flashing repeatedly worked for me.
Tigerhoods said:
Just uploaded a rooted twrp backup with real superuser ++++much more
Click to expand...
Click to collapse
Wow,
Download url please
immtu said:
Wow,
Download url please
Click to expand...
Click to collapse
Just scroll down to the z3v dev section.
I was actually able to flash the stock ftf coming 5.0.2. I had to flash it with default options the first time with it failing. I then found that I have to basically flash noting to clear the error on the phone by checking everything in exclude and the other exclude box where it shows its not displaying any files in the middle of the window.
Once that went through, I was able to upgrade from stock to .44 and then the the two updates for 5.1.1. After all that I reset to factory again to test on rooting the phone. I was too, able to obtain root with King Root. I was able to install zxrecovery and xposed with no problems. I'm actually used to King Root as I had to use it on the Verizon branded 7" tablet that didn't have any other possible methods previously. I also found that Busybox was slightly out of date (difference of 2.0) and installed to /sbin which wasn't too big of an issue.
Beyond that my phone seems to get pretty warm and typically complains about not charging even on a 2 Amp charger.
Can you tell me how you avhieved root because i want it but i can't revert to kitkat for some reason (flashtool won't recognise the update file) and I'm on lollipop. I've tried kingroot(app version) and it didn't work,tried reverting didn't work and tried all the framaroot,towelroot and such apps but none worked. I want working root,xposed and twrp. I can't find any way to do it please help.
Zandermc3 said:
Can you tell me how you avhieved root because i want it but i can't revert to kitkat for some reason (flashtool won't recognise the update file) and I'm on lollipop. I've tried kingroot(app version) and it didn't work,tried reverting didn't work and tried all the framaroot,towelroot and such apps but none worked. I want working root,xposed and twrp. I can't find any way to do it please help.
Click to expand...
Click to collapse
Try King root again. I used their apk on the phone. It rebooted once at 30%, but when I got back in the app after the reboot, it successfully rooted the device.
thals1992 said:
Try King root again. I used their apk on the phone. It rebooted once at 30%, but when I got back in the app after the reboot, it successfully rooted the device.
Click to expand...
Click to collapse
Well when i tried i did it 3 times and it failed,never rebooted. I have z3 international or 6603 i think
Zandermc3 said:
Well when i tried i did it 3 times and it failed,never rebooted. I have z3 international or 6603 i think
Click to expand...
Click to collapse
Thats why then. This is only for the Z3v the Verizon variant.
Hi there,
New to the forum. After several hours of reading and searching, I became bewildered enough to decide to register and post .
This thread looked promising. I'm currently on rooted 4.4.4 with this phone. I also have a custom recovery installed. Im trying to get to 5.1.1. As of right now, I assume my only option is to wait for a 5.1.1 ftf so that I can update, because the OTA updates won't work (phone reboots into the custom recovery and the update is interrupted).
Is there an easier way to get the OTA? Or am I stuck waiting for an ftf?
To be clear, my goal is to be on 5.1.1 with root. But at this point I don't think I can get to 5.1.1 at all.

Categories

Resources