When I launch GetRIL I see this:
RIL: KitKat (I9100XXLS6; I9100XXLS8)
md5sum: 163ecafa01912637fe344ec1f8264d70
Baseband: I9100XXLS8
recommended: I9100XXLS6; I9100XXLS8
RIL/baseband doesn't match
Where can I download 'I9100XXLS6; I9100XXLS8' baseband?
I've searched all over google and can't find it. I can only find I9100XXLS6 OR I9100XXLS8, but not the one together.
Clearly you haven't been searching all over google yet, neither the app.
You can click on the list (in the getril app from the play store) and KitKat (I9100XXLS6; I9100XXLS8) is located at the bottom.
Please check the forum first..
:good:
zakaria888 said:
Clearly you haven't been searching all over google yet, neither the app.
You can click on the list (in the getril app from the play store) and KitKat (I9100XXLS6; I9100XXLS8) is located at the bottom.
Please check the forum first..
:good:
Click to expand...
Click to collapse
The app only downloads the RIL, I need the Baseband, and I can not find it anywhere (searched for 2 hours, have seen many other modems/radios, but not the one I'm looking for)
GreekBlood said:
The app only downloads the RIL, I need the Baseband, and I can not find it anywhere (searched for 2 hours, have seen many other modems/radios, but not the one I'm looking for)
Click to expand...
Click to collapse
I tought basebands comes pre with Roms ?
Actually.. This is pretty confusing. I've got a I9100P with kitkat 4.4.4 (CM 11.0)
Was wondering if i actually could try the KitKat (I9100XXLS6; I9100XXLS8) , Since the getril app is recommending me I9100XXLS8; I9100PXXLS8.
Because S2 comes actually with Jelly bean 4.1.2 and the stock modems are designed for jelly bean.
Like im really confused right now. Should i try KitKat (I9100XXLS6; I9100XXLS8) for my I9100P?
zakaria888 said:
I tought basebands comes pre with Roms ?
Click to expand...
Click to collapse
Only RIL comes with roms, at least carbon does not flash basebands.
you can either have xxls8 or xxls6 baseband(i.e. modem) on your phone at one time.
So if you have xxls8 baseband on your phone, download matching RIL from GetRIL and install it. That should be enough.
Is this mismatch causing any issues in your phone? or are you just getting curious after seeing the results in getril?
banjara said:
you can either have xxls8 or xxls6 baseband(i.e. modem) on your phone at one time.
So if you have xxls8 baseband on your phone, download matching RIL from GetRIL and install it. That should be enough.
Is this mismatch causing any issues in your phone? or are you just getting curious after seeing the results in getril?
Click to expand...
Click to collapse
A bit of both.
When I flash XXLS6 or XXLS8 baseband, GetRIL gives me the option to install XXLS6; XXLS8 ril, but not the one from kitkat (and if I use the kitkat ril it says that it does not match)
Also, my other problem is the muffled microphone, it only works when I shout or using the handsfree mode.
It worked before on stock 2.3.3 (was shipped with it), it worked also with XXMS4 (baseband + ril) but I could not call or hang up. When I flash XXMS4 (baseband + ril) now I still have the muffled mic.
And in the service menu I can not select 5 Audio, it doesn't exists. Also, mic boost with sTweaks doesn't work.
GreekBlood said:
A bit of both.
When I flash XXLS6 or XXLS8 baseband, GetRIL gives me the option to install XXLS6; XXLS8 ril, but not the one from kitkat (and if I use the kitkat ril it says that it does not match)
Also, my other problem is the muffled microphone, it only works when I shout or using the handsfree mode.
It worked before on stock 2.3.3 (was shipped with it), it worked also with XXMS4 (baseband + ril) but I could not call or hang up. When I flash XXMS4 (baseband + ril) now I still have the muffled mic.
And in the service menu I can not select 5 Audio, it doesn't exists. Also, mic boost with sTweaks doesn't work.
Click to expand...
Click to collapse
Why do you want to install kitkat RIL specifically? AFAIK, RIL and modems are independent of the ROMs.
About your microphone, a modem change wont help or a modem/ril mismatch wont affect it. If mic boost with stweaks itself didnt work they I would suggest you to check your hardware. There is a chance your usb port is gone.
banjara said:
Why do you want to install kitkat RIL specifically? AFAIK, RIL and modems are independent of the ROMs.
About your microphone, a modem change wont help or a modem/ril mismatch wont affect it. If mic boost with stweaks itself didnt work they I would suggest you to check your hardware. There is a chance your usb port is gone.
Click to expand...
Click to collapse
The kitkat ril is needed, I can not make calls or hang up with XXMS4 (not tested with other jb modems/rils).
There might be a chance that it is a hw issue, but I've read on some other topics over the internet that a usb board replace didn't help.
zakaria888 said:
Clearly you haven't been searching all over google yet, neither the app.
You can click on the list (in the getril app from the play store) and KitKat (I9100XXLS6; I9100XXLS8) is located at the bottom.
Please check the forum first..
:good:
Click to expand...
Click to collapse
Thank you Sir, you saved my phone
Related
Hello,
My S2 originally came with Android 2.3.4. I then decided to root and switch to a custom ROM. I'm currently running Hydra-H2O Rom, AOKP, and I noticed my baseband is not the same as it was anymore (originally phone: I9100UHKG4). Now, after upgrading, I noticed that sometimes my data connection would drop, and the carrier menu that comes with the sim chip (Sim Toolkit) stopped working (i can access it, but it wont communicate).
So, I guess my question is, can I flash the modem part of the original GB stock rom and will that fix my issues?
Thanks for your help
Yeah, you get the actual modem file and either use Odin or ClockwordMod recovery to do it.
Sent from my GT-I9100 using Tapatalk 2
cool1007 said:
Hello,
My S2 originally came with Android 2.3.4. I then decided to root and switch to a custom ROM. I'm currently running Hydra-H2O Rom, AOKP, and I noticed my baseband is not the same as it was anymore (originally phone: I9100UHKG4). Now, after upgrading, I noticed that sometimes my data connection would drop, and the carrier menu that comes with the sim chip (Sim Toolkit) stopped working (i can access it, but it wont communicate).
So, I guess my question is, can I flash the modem part of the original GB stock rom and will that fix my issues?
Thanks for your help
Click to expand...
Click to collapse
find ur modem here
http://obihoernchen.net/downloads/?dir=SGS2 Modems
http://www.veyka.co.uk/radios/
http://forum.xda-developers.com/showthread.php?t=1131950
neerajganga said:
find ur modem here
http://obihoernchen.net/downloads/?dir=SGS2 Modems
http://www.veyka.co.uk/radios/
http://forum.xda-developers.com/showthread.php?t=1131950
Click to expand...
Click to collapse
Thank you bro, although the modem for my region/carrier does not appear on any of the links listed in your post. It didn't matter because I already extracted it from the original stock rom downloaded directly from Samsung.
I am currently running baseband UHKG4 with no problem, however it did not fix my issue with the Sim Toolkit menu. I still cant use any of the options on it. Maybe it is a chip problem, go figure
Regards,
cool1007 said:
Thank you bro, although the modem for my region/carrier does not appear on any of the links listed in your post. It didn't matter because I already extracted it from the original stock rom downloaded directly from Samsung.
I am currently running baseband UHKG4 with no problem, however it did not fix my issue with the Sim Toolkit menu. I still cant use any of the options on it. Maybe it is a chip problem, go figure
Regards,
Click to expand...
Click to collapse
which rom are u in
neerajganga said:
find ur modem here
http://obihoernchen.net/downloads/?dir=SGS2 Modems
http://www.veyka.co.uk/radios/
http://forum.xda-developers.com/showthread.php?t=1131950
Click to expand...
Click to collapse
useful info.
so, this means that even though people say the models i9100 and i9100m are hardware identical, in fact they are not. the proof would be that the i9100's modem corresponding to a region, for example to europe (with LS6 and LS8 supposed to work) does not work with i9100m designed for canada (here, MUGL3 and XXLQ6 are appropriate).
Don't worry, sometimes it doesn't even work for I9100.
Sent from the little guy
dr.pythagora said:
useful info.
so, this means that even though people say the models i9100 and i9100m are hardware identical, in fact they are not. the proof would be that the i9100's modem corresponding to a region, for example to europe (with LS6 and LS8 supposed to work) does not work with i9100m designed for canada (here, MUGL3 and XXLQ6 are appropriate).
Click to expand...
Click to collapse
That's bs.
Read my signature.
Mugl3 modem is out performed by ld8 modem on my phone. Location does not dictate model. The i9100 is the i9100, whether you purchase in Canada (the 'M' suffix) or elsewhere.
You choose the modem that works best for you and your phone. Period.
Don't be twisting words around to suit your theories.
Signature
Sent from my Samsung GT-i9100M
ROM NeatRom Lite 4.3 XWLSD
Kernel Philz 4.53 XXMS1
Mods:
23 Fancy Toggles blue w/rt clock
Automatic Call Recorder
NeatRom Boot Animation
Fixes
MW & Ripple Lockscreen On/Off fix
Hey guys,
Wondering if I could get some advice on modems. I'm using the latest CM10 preview on the Three network in the UK - and need to flash an appropriate modem. I've read some people do this by trial and error - but is there a better way?
Using the GetRIL app, I see:
RIL: XWLPO
Baseband: I9100XXLPQ
The app is telling me that these do not match. I'm afraid I don't understand the relationship between RIL and baseband - can I use this information to select an appropriate modem from this list:
http://www.clockworkmod.com/rommana...t&name=codeworkx&deviceName=Samsung Galaxy S2
My guess would be to use the LPQ modem - but is that just me not understanding?
Thanks,
Xeo
Ok, I've found this thread:
http://forum.xda-developers.com/showthread.php?t=1131950
It appears to imply that you do indeed just need to try a few different modems until one works well - bah! If anyone has any advice on where to start, it would be most welcome
Xeo
Xeodus said:
Hey guys,
Wondering if I could get some advice on modems. I'm using the latest CM10 preview on the Three network in the UK - and need to flash an appropriate modem. I've read some people do this by trial and error - but is there a better way?
Using the GetRIL app, I see:
RIL: XWLPO
Baseband: I9100XXLPQ
The app is telling me that these do not match. I'm afraid I don't understand the relationship between RIL and baseband - can I use this information to select an appropriate modem from this list:
http://www.clockworkmod.com/rommana...t&name=codeworkx&deviceName=Samsung Galaxy S2
My guess would be to use the LPQ modem - but is that just me not understanding?
Thanks,
Xeo
Click to expand...
Click to collapse
I use NELP2 ... works a treat.... this was a Three specific file... Recently updated Stock phones have this ... so why not??
nutmegy said:
I use NELP2 ... works a treat
Click to expand...
Click to collapse
Thanks for the suggestion - I see that's one of the recommended modems on the thread I linked
Any suggestions where I could get hold of the CWM flashable zip? I don't see a download in codeworkx's ROM Manager list
Xeodus said:
Thanks for the suggestion - I see that's one of the recommended modems on the thread I linked
Any suggestions where I could get hold of the CWM flashable zip? I don't see a download in codeworkx's ROM Manager list
Click to expand...
Click to collapse
I have attached the flashable zip in my last post for ya...
nutmegy said:
I have attached the flashable zip in my last post for ya...
Click to expand...
Click to collapse
Ta!
i use NELP4, slightly quicker 3G and a better reception for me in the midlands than what i got with either nelp2/3
Hi, recently I just flashed liquidsmooth rc2 4.2.2 rom. The data network seems to be always 'asleep', I do not receives notifications for whatsapp and facebook. Unless, I surf the net using browser or stream some youtube videos. I saw many posts about flashing a radio after a custom rom, so do I need to flash a radio? (there is no fm radio app after i flashed the rom and gapps)
Model: Samsung Galaxy SIII GT-I9300
Custom Rom: LiquidSmooth v2.1-RC2
Android version: 4.2.2
Baseband version: I9300DXELK1
GotFired said:
Hi, recently I just flashed liquidsmooth rc2 4.2.2 rom. The data network seems to be always 'asleep', I do not receives notifications for whatsapp and facebook. Unless, I surf the net using browser or stream some youtube videos. I saw many posts about flashing a radio after a custom rom, so do I need to flash a radio? (there is no fm radio app after i flashed the rom and gapps)
Model: Samsung Galaxy SIII GT-I9300
Custom Rom: LiquidSmooth v2.1-RC2
Android version: 4.2.2
Baseband version: I9300DXELK1
Click to expand...
Click to collapse
Radio in this case means modem (baseband)
You have a baseband but it might be incompatible, ......it's the baseband you are showing the one you had before the flash?
Also check your apn settings, you might need to get them from your carrier
slaphead20 said:
Radio in this case means modem (baseband)
You have a baseband but it might be incompatible, ......it's the baseband you are showing the one you had before the flash?
Also check your apn settings, you might need to get them from your carrier
Click to expand...
Click to collapse
The baseband is after the flash.
I checked the apn settings, nothing seems wrong.
GotFired said:
The baseband is after the flash.
I checked the apn settings, nothing seems wrong.
Click to expand...
Click to collapse
What baseband did you have before? Might be worth reflashing modem+ ril
slaphead20 said:
What baseband did you have before? Might be worth reflashing modem+ ril
Click to expand...
Click to collapse
I am not sure, is there anyway for me to check previous baseband?
GotFired said:
I am not sure, is there anyway for me to check previous baseband?
Click to expand...
Click to collapse
Not unless you made a note of it . Or try
http://forum.xda-developers.com/showthread.php?t=1978840
jje
Yesterday I updated my i9300 to android 4.3
Baseband version I9300BUUGMJ3
Build number JSS15J.I9300XXUGMJ9
..and since then I haven't had any reception. My imei number, serial number, and everything else is same and still there, but I just can't get it to get reception again... When I go to my Mobile Networks, it says registered on network, but again, no reception. Then I tried installing the modem BUUGMJ3 with odin which didn't work. What can help? Stock firmware? Please help.
Thanks in advance.
currently experiencing the same issue mate. I can't seem to find a workaround/solution for this -__-
Is that base band supposed to work in your country? Find an modem later than EMGx, without a RIL, for your country and install that to test.
boomboomer said:
Is that base band supposed to work in your country? Find an modem later than EMGx, without a RIL, for your country and install that to test.
Click to expand...
Click to collapse
I've probably made a big mistake there, no it's meant for mine country, it's for the county near mine, Croatia, but I read somewhere that this doesn't matter.. :/
And by 'later than EMGx' I'm not sure what you mean, but I've flashed EMG4 modem which didn't seem to work.
Found something about flashing a previous modem and restoring your EFS folder, but I do not have my EFS folder backed up - I forgot to.
A few days ago I paid about $30 for a repair on my phone, I don't really want to send it off for repairs again, I really wonder if there is an fix to this
Follow the guides in general forum, stickies on how to flash back to 4.1.2 stock rom. Make sure it's at least EMG4 base band.
boomboomer said:
Follow the guides in general forum, stickies on how to flash back to 4.1.2 stock rom. Make sure it's at least EMG4 base band.
Click to expand...
Click to collapse
Yeah, about that...
first of all, sorry for bugging you so much..
but I downloaded the right stock firmware for my country, I9300XXEMG4_I9300BHTEMH1_I9300XXEMG4, but after I flash it via odin when the phone turns on it gets stuck in a loop showing the Samsung logo repeatedly...
Edit:
Okay, I managed to install the stock firmware 4.1.2 but it still is showing 'Emergency calls only', the modem is xxemg4...
Delko said:
Yeah, about that...
first of all, sorry for bugging you so much..
but I downloaded the right stock firmware for my country, I9300XXEMG4_I9300BHTEMH1_I9300XXEMG4, but after I flash it via odin when the phone turns on it gets stuck in a loop showing the Samsung logo repeatedly...
Edit:
Okay, I managed to install the stock firmware 4.1.2 but it still is showing 'Emergency calls only', the modem is xxemg4...
Click to expand...
Click to collapse
how about your IMEI/Serial numbers? are they still the same before you downgrade and flashed the XEMG4 modem? mine are the same with SN/IMEI so I guess that's why it worked. I just took the risk cause I was really pissed experiencing the lag and the battery drain in 4.3.
Do factory reset from settings option in touch wiz, make sure the imei and serial number match the label under your battery.
If still no good then try another SIM in your phone, final steps would be restore efs backup then repair centre.
thehavoc said:
how about your IMEI/Serial numbers? are they still the same before you downgrade and flashed the XEMG4 modem? mine are the same with SN/IMEI so I guess that's why it worked. I just took the risk cause I was really pissed experiencing the lag and the battery drain in 4.3.
Click to expand...
Click to collapse
Well it's all the same as it used to be. Could it be that the modem I had before EMG4 changed the format of my efs folder?
boomboomer said:
Do factory reset from settings option in touch wiz, make sure the imei and serial number match the label under your battery.
If still no good then try another SIM in your phone, final steps would be restore efs backup then repair centre.
Click to expand...
Click to collapse
Did a factory reset, imei, s/n same.
Android 4.1.2 EMG4 modem still no reception.
It seems that MGX modem has change ur IMEI from /efs1 to /efs2. MGX modem seems to support only 4.3 roms (due to some security issue).
It is not recommended,but u could flash an older rom with modem (get from www.sammobile.com) then restore an efs backup (if u did some) from /efs2 to /efs1
Sent from my GT-I9300 using xda app-developers app
Samsung Galaxy S3 i9300 "not Registered on Network" after 4.3 I9300XXUGMJ9 Update
I recently installed 4.3-official-I9300XXUGMJ9 on my Samsung Galaxy S3 (i9300) and everything went fine. I was upgrading from 4.1.2 but now I am facing “Not Registered on network” Issue. I tried Arzia Patch, tried falshing Modems (I9300XXLG8 and BUUGMJ3 ) nothing Works.
FYI: My serial Kay or IMEI is not 0000 they are fine.
Here’s the list from Setting->About Device->Status<br>
Network: unknown<br>
Service State: Out of service<br>
Mobile Network State: disconnected<br>
Device Status: Official
Also My Sim works fine in other Phones. Any help will be greatly appriciated.
dmarkweb said:
I recently installed 4.3-official-I9300XXUGMJ9 on my Samsung Galaxy S3 (i9300) and everything went fine. I was upgrading from 4.1.2 but now I am facing “Not Registered on network” Issue. I tried Arzia Patch, tried falshing Modems (I9300XXLG8 and BUUGMJ3 ) nothing Works.
FYI: My serial Kay or IMEI is not 0000 they are fine.
Here’s the list from Setting->About Device->Status<br>
Network: unknown<br>
Service State: Out of service<br>
Mobile Network State: disconnected<br>
Device Status: Official
Also My Sim works fine in other Phones. Any help will be greatly appriciated.
Click to expand...
Click to collapse
Ariza patch only works on older modems (efs v1 modems). So, that wont help.
You said you flashed the zuluman modems but.... did you flash the patched kernels too? You need the patched kernels for the patched modems to work. I don't know why, but that's what zuluman says (according to him, the kernel has a modem signature check and it wont work if the modem was modified).
Gonzakpo said:
Ariza patch only works on older modems (efs v1 modems). So, that wont help.
You said you flashed the zuluman modems but.... did you flash the patched kernels too? You need the patched kernels for the patched modems to work. I don't know why, but that's what zuluman says (according to him, the kernel has a modem signature check and it wont work if the modem was modified).
Click to expand...
Click to collapse
Sorry didn't tried flashing kernal. since I didn't find that file, because wasn't available for download. can you help me find a combination of Modem+kernal??
Thanks
dmarkweb said:
Sorry didn't tried flashing kernal. since I didn't find that file, because wasn't available for download. can you help me find a combination of Modem+kernal??
Thanks
Click to expand...
Click to collapse
Here are all the patched modems and kernels made by zuluman.
https://drive.google.com/folderview...&usp=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8
In my opinion you should flash the latest official firmware and download the appropiate modem and kernel from that google drive.
You can download the latest official firmware from the general section of this forum.
Good luck.
Remember to always have an efs backup!
Great thanks!
Gonzakpo said:
Here are all the patched modems and kernels made by zuluman.
https://drive.google.com/folderview...&usp=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8
In my opinion you should flash the latest official firmware and download the appropiate modem and kernel from that google drive.
You can download the latest official firmware from the general section of this forum.
Good luck.
Remember to always have an efs backup!
Click to expand...
Click to collapse
Flashing the Modem + Kernal after rooting the Phone works for me. I have flashed it using CWM.
Thanks once again.
the same problem with signal
hello,
i've the same problems with my s3. i flashed it OTA to Android 4.3
After this i had no signal. ...
When i found this thread i was so happy. BUT!!!
i downloaded all the modem and kernel files from the google drive and wanted to flash them (Patched_XXUGMK6_xxx.zip) with cwm recovery (latest version).
whenever i want to do this, i get the following message and the update aborts: "E:Can't copy META-INF/com/google/android/update-binary"
what can i do? Can i flash them with odin, too? Or does anybody have another idea?
here are some Infos about my Phone:
Android-Version: 4.3
Baseband: I9300XXUGMK6
Kernel: 3.0.31-2191747
[email protected] #1
Tue Nov 26 16:57:12 KST 2013
Build: JSS15J.I9300XXUGMK6
hmm...
can nobody help me? ...
sorry for spamming, but i've got a problem without a phone
greetz,
Carpe.
You said your imei & serial is ok but you cannot register to network. Have you paid your bills?
But if it's corrupted serial number.
Try this guide.
thx for your answer.
Payed my bills? ... uuuuuups!
back to topic: i've flashed my phone back to 4.1.2 for the moment. Network seems to work. ... i'll try some things and give a feedback here. ...
You have to flash an Android 4.3 modem for it to work I think but as your on 4.1.2 now I guess it doesn't matter anymore
Sent from my GT-I9300 using Tapatalk
Hi all,
Been facing a weird issue ever since I flashed official 4.3 (NB6 with NA8 baseband) with Odin.
I've been able to flash roms back and forth earlier, but ever since the "official" 4.3, I no longer get network signal in KK roms. IMEI is empty and baseband is unknown. WiFi works fine though.
Tried flashing different modems but nothing works. The closest I got to getting a signal was for 1 second and then dropped (keeps getting and dropping). Searched the forums but it seems to be very rare.
Always have to restore to official 4.3 via Odin to get a working phone
Any ideas on this or maybe Sammy doesn't like me anymore ?
~ RazorMC
RazorMC said:
Hi all,
Been facing a weird issue ever since I flashed official 4.3 (NB6 with NA8 baseband) with Odin.
I've been able to flash roms back and forth earlier, but ever since the "official" 4.3, I no longer get network signal in KK roms. IMEI is empty and baseband is unknown. WiFi works fine though.
Tried flashing different modems but nothing works. The closest I got to getting a signal was for 1 second and then dropped (keeps getting and dropping). Searched the forums but it seems to be very rare.
Any ideas on this or maybe Sammy doesn't like me anymore ?
PS: I tried sammy's 4.3-based roms and all was ok, but the official update really messed things up bad.
~ RazorMC
Click to expand...
Click to collapse
I Was Having the same problem,not with my Phone,but an Friend Phone. No imei and Hardware serial changed. Resolved using my Samsung Box. Maybe you need one of those. i think is the last stand :good:
could be a csc problem
i am not sure though
also was the firmware for your region
below link may help
http://forum.xda-developers.com/galaxy-s3/help/i9300-service-sim-card-gps-fix-solution-t2738219
dheeraj (dhlalit11) said:
could be a csc problem
i am not sure though
also was the firmware for your region
below link may help
http://forum.xda-developers.com/galaxy-s3/help/i9300-service-sim-card-gps-fix-solution-t2738219
Click to expand...
Click to collapse
I had seen the thread earlier but it doesn't mention much except cm 10.1 and "some" setting lol.
Firmware is right (UAE) according to sammobile. I will look into CSC though. I used to be able to flash from official 4.1.2 to TW-based and AOKP-based 4.3 and 4.4 as well, but the official 4.3 firmware was bad news (pretty smooth rom though)
I'm guessing that the NB6 fw hampers baseband/radio to prevent KK roms from reaching S3 users. Kind of like a hidden Knox or something.
~ RazorMC
Tried CM 10.1.3 but no signal even with patched modem MG4.
This is really frustrating lol. I got the S3 to play with roms and now it's over?
Any other ideas ppl on what I could do for this?
~ RazorMC
This is rather an EFS problem than CSC.
Read the EFS threads.
hey
RazorMC said:
Hi all,
Been facing a weird issue ever since I flashed official 4.3 (NB6 with NA8 baseband) with Odin.
I've been able to flash roms back and forth earlier, but ever since the "official" 4.3, I no longer get network signal in KK roms. IMEI is empty and baseband is unknown. WiFi works fine though.
Tried flashing different modems but nothing works. The closest I got to getting a signal was for 1 second and then dropped (keeps getting and dropping). Searched the forums but it seems to be very rare.
Always have to restore to official 4.3 via Odin to get a working phone
Any ideas on this or maybe Sammy doesn't like me anymore ?
~ RazorMC
Click to expand...
Click to collapse
Tried flashing MG4 modem????? :cyclops::cyclops::cyclops:
Benko111 said:
This is rather an EFS problem than CSC.
Read the EFS threads.
Click to expand...
Click to collapse
One thing I came across was to downgrade efs from v2 to v1 using the rescue firmware. I don't know if that is safe or will it even work.
shazzy1 said:
Tried flashing MG4 modem????? :cyclops::cyclops::cyclops:
Click to expand...
Click to collapse
Tried it, doesn't work
I'm stuck on official 4.3.
~ RazorMC
Install Samsung kies 3 from here
http://www.samsung.com/uk/support/usefulsoftware/KIES/
Run kies then go to Tool > Firmware Upgrade and Installation
Follow the on screen instructions, this should completely reset the phone to a working condition.
MK6 is stable
Try to use MK6 complete suite, then apply MK6 patched modem and kernel not only patched modem. I don't know why people say flash MG4 modem, it will never work alone. You must need patched kernel to make it work or use ariza patch in older releases.
ag4751 said:
Install Samsung kies 3 from here
http://www.samsung.com/uk/support/usefulsoftware/KIES/
Run kies then go to Tool > Firmware Upgrade and Installation
Follow the on screen instructions, this should completely reset the phone to a working condition.
Click to expand...
Click to collapse
I prefer Odin over Kies any day. It's better for flashing imo.
Point is, I can use stock 4.3 rom without any problems, but my issue is that I can no longer change to non-TW roms, esp KK.
galliard said:
Try to use MK6 complete suite, then apply MK6 patched modem and kernel not only patched modem. I don't know why people say flash MG4 modem, it will never work alone. You must need patched kernel to make it work or use ariza patch in older releases.
Click to expand...
Click to collapse
Gonna try this now. I'm aiming for KK roms, so I guess Ariza won't help me here.
PS: I can get stock 4.3 without any problems. The signal problem occurs in non-TW roms only. I wanted signal on a 4.4-based rom.
~ RazorMC
RazorMC said:
One thing I came across was to downgrade efs from v2 to v1 using the rescue firmware. I don't know if that is safe or will it even work.
Tried it, doesn't work
I'm stuck on official 4.3.
~ RazorMC
Click to expand...
Click to collapse
can you tell me what error is thrown????
(i) you have CWM r8?
(i) download a cwm flashable MG4 Modem, looks like your phone has an EFS issue (had this issue once).
shazzy1 said:
can you tell me what error is thrown????
(i) you have CWM r8?
(i) download a cwm flashable MG4 Modem, looks like your phone has an EFS issue (had this issue once).
Click to expand...
Click to collapse
I don't get any signal on KitKat roms. IMEI is empty and baseband is unknown in "About" section. That is my issue.
Stock 4.3 works fine for me
I've tried MG4 and MK6 modem and restoring efs via Philz Recovery 6.07.9 but no luck. I get a network signal that keeps dropping most of the time. This is strange because I haven't come across this problem before. Everytime I have to flash stock via Odin.
I need to find out why this happens so I can help others if they have the same issue.
EFS is ok and not damaged at all. The problem is that the system can't read the EFS, but I can't figure out what I need to do to get it to work.
~ RazorMC
RazorMC said:
I don't get any signal on KitKat roms. IMEI is empty and baseband is unknown in "About" section. That is my issue.
Stock 4.3 works fine for me
I've tried MG4 and MK6 modem and restoring efs via Philz Recovery 6.07.9 but no luck. I get a network signal that keeps dropping most of the time. This is strange because I haven't come across this problem before. Everytime I have to flash stock via Odin.
I need to find out why this happens so I can help others if they have the same issue.
EFS is ok and not damaged at all. The problem is that the system can't read the EFS, but I can't figure out what I need to do to get it to work.
~ RazorMC
Click to expand...
Click to collapse
are custom 4.3's working fine mate tried any????
[SOLVED]
Problem: Upgraded to official 4.3 and since then I have not been able to get network signals on 4.4-based roms. Stock 4.3 works fine.
Solution: Installed stock 4.1.2 (even though people said it doesn't work). Lost my signal and IMEI became 0049. Then I installed the patched MG4 modem and got imei and signal back. Then upgraded to Resurrection Remix rom (without GApps first) and still had signal.
Credits:
shazzy1 said:
Tried flashing MG4 modem????? :cyclops::cyclops::cyclops:
Click to expand...
Click to collapse
and
galliard said:
Try to use MK6 complete suite, then apply MK6 patched modem and kernel not only patched modem. I don't know why people say flash MG4 modem, it will never work alone. You must need patched kernel to make it work or use ariza patch in older releases.
Click to expand...
Click to collapse
and
SamMobile
:good: Thanks to all who posted here and helped me with ideas.
~ RazorMC
Glad u found a fix
Sent from my GT-I9300 using XDA Free mobile app
Hi,
I'm in the exact same situation, stock 4.3 work's fine but every time i flash some 4.4 rom, i lost imei / baseband (generic imei and unknown baseband) and the phone is just useless.
After i flashed a 4.4 rom and lost signal, i tried to flash every modem / patched modem that i could find on xda but no luck.
Any ideas of a method that would allow me to flash any 4.4 or 5.0 rom without losing imei / baseband ??
Thx
As you found this long dead thread why not try the solution they found?
boomboomer said:
As you found this long dead thread why not try the solution they found?
Click to expand...
Click to collapse
Because I cannot get my imei / baseband back after flashing the modem on top of 4.1.2.
So I was wondering if there's anything else to try in my situation (stock tw 4.3)
Anyway, Thx for your help...