Related
In the Wireless Networks it says "Connected" next to my "SSID" i have the correct key and dns/static ip setup. I go on Marketplace, internet browser (Opera), and another internet browser (Skyfire) and none of them work, so basically I'm connected to my router but I have no Internet.
I have HSPL3, ChuckyROM, and Radio Radio_2_11_50_26, I used to have Radio 2_12_50_02_2 but the internet didn't work with that one either.
What could be wrong??
Sekito said:
In the Wireless Networks it says "Connected" next to my "SSID" i have the correct key and dns/static ip setup. I go on Marketplace, internet browser (Opera), and another internet browser (Skyfire) and none of them work, so basically I'm connected to my router but I have no Internet.
I have HSPL3, ChuckyROM, and Radio Radio_2_11_50_26, I used to have Radio 2_12_50_02_2 but the internet didn't work with that one either.
What could be wrong??
Click to expand...
Click to collapse
First off why are you using static?
Second have seen these types of issues before with static , try dynamic(DHCP).
well i have to use the dns, i don't need the static ip, i switched to dhcp and only input the dns but it is still not working.
Sekito said:
well i have to use the dns, i don't need the static ip, i switched to dhcp and only input the dns but it is still not working.
Click to expand...
Click to collapse
In your settings, when you configured your wifi , in the box that says "connects to:" did you select "The Internet" or "My Work", this should be Internet ...
yea its says "The Internet" and by the way, after i removed the static IP my connection just says Unavailable when i try to connect (I hide my router's SSID so i input the stuff manually)
Oh and i had a motorola cliq before and it connected just fine
ok so for some reason i retried it just now and the internet works...so i guess problem is solved
Hi, I searched the forums and found this thread regarding wifi Internet problem so I'm posting my problems here.
I'm having similar wifi issue. I can connect to home router just fine but when I'm out using either free wifi from some stores (like panera or starbucks) or School wifi, it shows up as "Connected" but when I try browser it won't even show the home page or log in page. I switched from "Work" to "Internet" but it still won't work...
I don't think it's hardware problem but more so OS problem or something i'm missing. This problem only occurs with WinMo 6.5(I use stock rom), and when I boot Dan Android, wifi works fine. I'm not sure if Android's usage of wifi is somehow affecting my WinMo's ability to log into wifi but this is my wild guess.
If someone knows what my problem is could you please help me?
thanks
i think my problem was that when i tried to connect to my wifi, my hd2 was connected to my pc via usb. when i tried to connect when i'm not connected to my pc it worked
that's about all i know, hope it helps
did recognize this too...i think w-lan is disabled when active sync is activated...because the phone can use the internet connection of the pc.
back to topic: do you use static ip's in your home network or does the other networks (school) require a static but you're on dynamic ip?
DN41
hm, I have no idea which ip I use when I'm connected to home or public. How do I check?
I have recently returned to my apartment with my brand new archos 70. I use WPA2-PSK encryption for my wifi network. at first everything was golden, I could browse the web and whatnot just fine. as of a few days ago, wifi has not been working correctly. my device connects to the network (pulls an ip address from the router) but when I try to browse web pages or open web based apps they hang up and act as if I have no connection. it works fine on other networks (to limit the problem to my network) I have tried doing a factory reset of the device, tried power cycling my router and modem with no luck. I have also changed encryption types to no avail. i have the latest firmware for the gen 8 series. also from time to time during this session of events, sometimes it will connect to the router, then disconnect and reconnect. I have no clue whats going on because I havent changed any router settings since I got back. the only other devices on my wifi network are two laptops. any help would be appreciated.
you mean you restored to the factory settings ran through the start up all over again and it still won't connect to your router? have you tried any other types of connections or routers?
I had this problem just the other night was this close to reformatting the whole thing. but I solve the problem by turning the device off, then holding the reset button while it rebooted to turn it off again, an reinitializing the drivers.
how do you reinitialize the drivers? I did a factory wipe. and it connects, it shows as having network connectivity (even my router lists it as a dhcp client and currently making use of the access point) but no internet functions work. ive connected to other networks fine.
This happened to me when I first got my A70. What I had to do to fix it (after getting incredibly pissed, reformatting twice, and almost returning the thing) was to set it up to use a static IP address on my home wifi network. Don't know if it'll solve your problem, but it works beautifully for me and I'm able to enjoy the device now.
Just remember to uncheck "use static IP address" when you get on other wifi networks.
well, I set up static addressing, gave it a private ip, set up the gateway and dns, and it still wont connect to anything.
If set as wireless N, set as N+G or G only, latest firmware may have trouble connecting to wireless N networks.
na, I dont have it set to n, I have it set to auto which I believe puts it to g with my archos. thing is, it used to work. now it suddenly has problems.
Im beginning to wonder if the archos tablets are just picky about wireless routers. I wouldnt think so...
Upgrade the firmware
Archos published a firmware upgrade to solve this problem (December 2010). The related bug in the release notes is...
Wi-Fi: fix Wi-Fi stuck after a while when using WPA2/AES encryption mode
The new firmware download link is in the Archos website.
you can download the firmware to your computer, copy it to the root directory of the tablet using the USB cable, and run the upgrade process in the tablet.
... or you can use another WiFi network (without WPA2/AES) and download the update in the same tablet
Note: I cannot send the links, however you can use the information to search the links in the internet.
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
Hello everyone,
I have problem with VPN software in Android. I wrote "Android" because the same problem appear on every phone with android which I've tried. I have server with which I connect via VPN, server has two internet connections. One is ethernet connection via router (local internet provider), second one is mobile internet. Both solutions use static IP.
Android does not has any problem with connection via router, however in case of mobile internet there is no connection. The program show "Connecting..." and after few seconds there is information "failure".
Settings of those connection are very similar. Anyone know how to solve it ? I know that my description is probably a little bit chaotic but I'm willing to explain everything because it is quite important.
Hi!
I just got my new Honor 7 and I'm now experiencing a major flaw: I can connect to my WIFI, but won't get Internet connection.
Details:
- Wifi router supports 2.4Ghz and 5Ghz, same error on both.
- IP Configuration (DNS, Gateway, DHCP) set to same as on Laptop and other android devices - all other devices working fine
- When connected to Wifi, Phone can be pinged by other devices & phone can ping other devices
- Phone cannot ping the router but is shown in it's "connected devices" list (correct MAC adress and everything)
- When opening a Wifi Hotspot from my Notebook (forwarding the router's wifi), Phone can connect to internet & ping router (everything works perfectly)
How is it possible that if my Notebook forwards the router's wifi everything works perfect but I can't get it working by connecting directly?
Hope any of you can help me with my problem!
Best regards
Do you use a MAC filter? Sounds like your router blocks the connection.
Gesendet von meinem PLK-L01 mit Tapatalk
Nope, no MAC-Filter in use!
As i said the device gets listet among all other (working) devices in the router's DHCP devices list...
Sounds like a router issue. Any way to check if WiFi works on somebody else's WiFi? Suggest maybe change channels that WiFi is transmitting on the router
admisi said:
Sounds like a router issue. Any way to check if WiFi works on somebody else's WiFi? Suggest maybe change channels that WiFi is transmitting on the router
Click to expand...
Click to collapse
The Wifi on the device seems to work fine:
Wifi Hotspot made by notebook works, Public Wifi at Shopping Mall worked fine .. Checking more Networks tomorrow!
\\EDIT: Both Networks at my University work fine.
Is your subnet mask 255.255.255.0 or something else for the gateway? This affects the network prefix length. Also check DNS, try static setting instead of dhcp and use Google DNS 8.8.8.8 and 8.8.4.4
---------- Post added at 08:46 AM ---------- Previous post was at 08:12 AM ----------
What is Gateway IP address and what is the Subnet mask?
admisi said:
Is your subnet mask 255.255.255.0 or something else for the gateway? This affects the network prefix length. Also check DNS, try static setting instead of dhcp and use Google DNS 8.8.8.8 and 8.8.4.4
---------- Post added at 08:46 AM ---------- Previous post was at 08:12 AM ----------
What is Gateway IP address and what is the Subnet mask?
Click to expand...
Click to collapse
Subnet mask is 255.255.255.0 , according to that prefix length is set to 24.
Can't get DNS , nothing changes when changing to google!
I noticed that when I do an arp scan for the network, I can find other devices but not the router. On my old phone the router will show up on arp scan!
If router can see phone, then assign it static IP address, then add that IP address to DMZ - that way it's fully open. Sadly with routers it's a matter of narrowing down the problem with trial and error to resolve. You can also try temporarily deactivating firewall, and/or temporarily removing WiFi security to see if any difference.
admisi said:
If router can see phone, then assign it static IP address, then add that IP address to DMZ - that way it's fully open. Sadly with routers it's a matter of narrowing down the problem with trial and error to resolve. You can also try temporarily deactivating firewall, and/or temporarily removing WiFi security to see if any difference.
Click to expand...
Click to collapse
Router can see phone! I have just added it's temporary IP as DMZ Host to check whether it solves the problem - and it does!
When the phone is set as DMZ Host in the router it can ping the router and connect to the internet (so far it seems like any other device).
Before setting the static IP and using this method permanently, I'd like to ask if this causes any changes to other users in the Network ? I am sharing the router with two other people using it for phones, tablets, IPTV etc.
I'm sorry I have no idea what DMZ is exactly.
Thank you very much for your help so far!
No problem. It's not really a permanent solution as it just opens up the IP address to all traffic. It does mean that the router is somehow blocking the phone in normal conditions. This could be for all sorts of reasons, firewall rules on the router, or port forwarding, or Mac filtering, or IP filtering, difficult to say. DMZ shouldn't affect the other users.
Sent from my PLK-L01 using Tapatalk
I'm not too sure about this router's configuration because it is a rather cheap NoName device provided by the ISP while at my home I'm used to AVM devices.
But I can nowhere spot any specific rules, there's not even a single port-forwarding set on the device. So I can't spot anything that could be blocking my phone :.
Anyway I have just removed my phone from DMZ, reconnected it to the Wifi and so far it's still working fine!
Even if I have to re-do this procedure every now and then after device reboots it shouldn't be a problem.
I have no Idea on how temporary setting it up as DMZ haschanged everything, but for now I'd consider the issue solved! I owe you one for this
Sorry that i have to reopen this old thread but i have the same problem with my HONOR 7.
I have Wifi Connection on my phone but the internet isnt working.
Curious is the fact that this problem only happens in my wifi at home and at my girlfriend (same router and telecommunication provider).At other wifi's everything is working fine.
I hope you can help me.
(sorry for the bad english)
MaxMonument94 said:
Sorry that i have to reopen this old thread but i have the same problem with my HONOR 7.
I have Wifi Connection on my phone but the internet isnt working.
Curious is the fact that this problem only happens in my wifi at home and at my girlfriend (same router and telecommunication provider).At other wifi's everything is working fine.
I hope you can help me.
(sorry for the bad english)
Click to expand...
Click to collapse
Set the Wifi band permanent anywhere between 1 to 10 and try connecting it.
vsriram92 said:
Set the Wifi band permanent anywhere between 1 to 10 and try connecting it.
Click to expand...
Click to collapse
Tested all 10 channels but still no internet.
Also tested disabling the WPA/WPA2 PSK safety but same result.
Put it in DMZ, find DHCP table and see which IP adress phone get, put that adress in DMZ, DMZ settings are on the same place as NAT (usually). I think that phone cannot get DNS server from router because of some rule in firewall, but try to ping 8.8.8.8 from phone without setting up DMZ, if DNS is problem he should ping that adress but not be able to load page in browser....
@ MaxMonument94 can u connect to any other Wifi ? or all having same issue ?
The internet connection is working in any other network exept the network at my girlfriends place but she has the same router/provider as i have.
If there are any german users, we both got “telecolumbus“ as internet provider.
Now its just more curious.
After i entered the IP in DMZ my ookla speedtest on my phone showed perfect results.
Also the Chrome browser loaded pages and other apps (like 9GAG, Telegram, Whatsapp) worked for a while without any problem.But after a while they all got connection problems (page dont load, waiting for connection on telegram, GIFs dont load).
After that i started a new speedtest and the results were again quite good.
Then the same procedure again and again.
I have really no clue what kind of problem that is.
Btw: my mobile internet was disabled all the time to dont distort the results.
When that happens again, try to ping 8.8.8.8 and tell me what is output, remember ping it when it wont work....
I have pinged 8.8.8.8 with Android Terminal Emulator
The results in the screenshot.