Hi!
I just got my new Honor 7 and I'm now experiencing a major flaw: I can connect to my WIFI, but won't get Internet connection.
Details:
- Wifi router supports 2.4Ghz and 5Ghz, same error on both.
- IP Configuration (DNS, Gateway, DHCP) set to same as on Laptop and other android devices - all other devices working fine
- When connected to Wifi, Phone can be pinged by other devices & phone can ping other devices
- Phone cannot ping the router but is shown in it's "connected devices" list (correct MAC adress and everything)
- When opening a Wifi Hotspot from my Notebook (forwarding the router's wifi), Phone can connect to internet & ping router (everything works perfectly)
How is it possible that if my Notebook forwards the router's wifi everything works perfect but I can't get it working by connecting directly?
Hope any of you can help me with my problem!
Best regards
Do you use a MAC filter? Sounds like your router blocks the connection.
Gesendet von meinem PLK-L01 mit Tapatalk
Nope, no MAC-Filter in use!
As i said the device gets listet among all other (working) devices in the router's DHCP devices list...
Sounds like a router issue. Any way to check if WiFi works on somebody else's WiFi? Suggest maybe change channels that WiFi is transmitting on the router
admisi said:
Sounds like a router issue. Any way to check if WiFi works on somebody else's WiFi? Suggest maybe change channels that WiFi is transmitting on the router
Click to expand...
Click to collapse
The Wifi on the device seems to work fine:
Wifi Hotspot made by notebook works, Public Wifi at Shopping Mall worked fine .. Checking more Networks tomorrow!
\\EDIT: Both Networks at my University work fine.
Is your subnet mask 255.255.255.0 or something else for the gateway? This affects the network prefix length. Also check DNS, try static setting instead of dhcp and use Google DNS 8.8.8.8 and 8.8.4.4
---------- Post added at 08:46 AM ---------- Previous post was at 08:12 AM ----------
What is Gateway IP address and what is the Subnet mask?
admisi said:
Is your subnet mask 255.255.255.0 or something else for the gateway? This affects the network prefix length. Also check DNS, try static setting instead of dhcp and use Google DNS 8.8.8.8 and 8.8.4.4
---------- Post added at 08:46 AM ---------- Previous post was at 08:12 AM ----------
What is Gateway IP address and what is the Subnet mask?
Click to expand...
Click to collapse
Subnet mask is 255.255.255.0 , according to that prefix length is set to 24.
Can't get DNS , nothing changes when changing to google!
I noticed that when I do an arp scan for the network, I can find other devices but not the router. On my old phone the router will show up on arp scan!
If router can see phone, then assign it static IP address, then add that IP address to DMZ - that way it's fully open. Sadly with routers it's a matter of narrowing down the problem with trial and error to resolve. You can also try temporarily deactivating firewall, and/or temporarily removing WiFi security to see if any difference.
admisi said:
If router can see phone, then assign it static IP address, then add that IP address to DMZ - that way it's fully open. Sadly with routers it's a matter of narrowing down the problem with trial and error to resolve. You can also try temporarily deactivating firewall, and/or temporarily removing WiFi security to see if any difference.
Click to expand...
Click to collapse
Router can see phone! I have just added it's temporary IP as DMZ Host to check whether it solves the problem - and it does!
When the phone is set as DMZ Host in the router it can ping the router and connect to the internet (so far it seems like any other device).
Before setting the static IP and using this method permanently, I'd like to ask if this causes any changes to other users in the Network ? I am sharing the router with two other people using it for phones, tablets, IPTV etc.
I'm sorry I have no idea what DMZ is exactly.
Thank you very much for your help so far!
No problem. It's not really a permanent solution as it just opens up the IP address to all traffic. It does mean that the router is somehow blocking the phone in normal conditions. This could be for all sorts of reasons, firewall rules on the router, or port forwarding, or Mac filtering, or IP filtering, difficult to say. DMZ shouldn't affect the other users.
Sent from my PLK-L01 using Tapatalk
I'm not too sure about this router's configuration because it is a rather cheap NoName device provided by the ISP while at my home I'm used to AVM devices.
But I can nowhere spot any specific rules, there's not even a single port-forwarding set on the device. So I can't spot anything that could be blocking my phone :.
Anyway I have just removed my phone from DMZ, reconnected it to the Wifi and so far it's still working fine!
Even if I have to re-do this procedure every now and then after device reboots it shouldn't be a problem.
I have no Idea on how temporary setting it up as DMZ haschanged everything, but for now I'd consider the issue solved! I owe you one for this
Sorry that i have to reopen this old thread but i have the same problem with my HONOR 7.
I have Wifi Connection on my phone but the internet isnt working.
Curious is the fact that this problem only happens in my wifi at home and at my girlfriend (same router and telecommunication provider).At other wifi's everything is working fine.
I hope you can help me.
(sorry for the bad english)
MaxMonument94 said:
Sorry that i have to reopen this old thread but i have the same problem with my HONOR 7.
I have Wifi Connection on my phone but the internet isnt working.
Curious is the fact that this problem only happens in my wifi at home and at my girlfriend (same router and telecommunication provider).At other wifi's everything is working fine.
I hope you can help me.
(sorry for the bad english)
Click to expand...
Click to collapse
Set the Wifi band permanent anywhere between 1 to 10 and try connecting it.
vsriram92 said:
Set the Wifi band permanent anywhere between 1 to 10 and try connecting it.
Click to expand...
Click to collapse
Tested all 10 channels but still no internet.
Also tested disabling the WPA/WPA2 PSK safety but same result.
Put it in DMZ, find DHCP table and see which IP adress phone get, put that adress in DMZ, DMZ settings are on the same place as NAT (usually). I think that phone cannot get DNS server from router because of some rule in firewall, but try to ping 8.8.8.8 from phone without setting up DMZ, if DNS is problem he should ping that adress but not be able to load page in browser....
@ MaxMonument94 can u connect to any other Wifi ? or all having same issue ?
The internet connection is working in any other network exept the network at my girlfriends place but she has the same router/provider as i have.
If there are any german users, we both got “telecolumbus“ as internet provider.
Now its just more curious.
After i entered the IP in DMZ my ookla speedtest on my phone showed perfect results.
Also the Chrome browser loaded pages and other apps (like 9GAG, Telegram, Whatsapp) worked for a while without any problem.But after a while they all got connection problems (page dont load, waiting for connection on telegram, GIFs dont load).
After that i started a new speedtest and the results were again quite good.
Then the same procedure again and again.
I have really no clue what kind of problem that is.
Btw: my mobile internet was disabled all the time to dont distort the results.
When that happens again, try to ping 8.8.8.8 and tell me what is output, remember ping it when it wont work....
I have pinged 8.8.8.8 with Android Terminal Emulator
The results in the screenshot.
Related
If you see this on Modaco, apols.
Hi folks, just picked one of these up for the £149 in Orange, but have a problem with wi-fi that I have had with a few WM devices over time, think its the AR6000 wlan chipset myself, seems very fussy about what and when it connects.
I would appreciate any help, but not please along the lines of "change your router", that ain't happening, it works fine with loads of other devices, so if this issue is non solveable, its the TG01 that goes!
OK, first connection to the Router (its a Billion ADSL) was fine, got connection, worked OK. From there in, as soon as it woke up, no dice, just unable to connect, always shows up in both WM and Tosh wireless util as available, just never connects.
Now, what I have noticed with this and at other times when I have had this issue with past devices is that it puts some odd stuff in the IP address field in the Configure Networks Adaptors screen.
I have it set for Use Server Assigned IP Address, but in the field below, I get this odd stuff fe80:221:e8ff:fe88 instead of 192.xxx.xxx.xxx that should be in there. I am sure this is somehow related to my connection issues, but searching the web, seems like noone else ever had this?
Kev
can u turn ur wifi off ?
and can u turn it back on ?
Yep, turns on and off no problem, even done hard reset to see if I can get that fresh connection, but no way.
That is your IP. You need to configure it with get automatic IP or put you the IP but is more complicated.
This problem have origin be tween router and mobile or pc. Some time routers didn't assign an IP address.
Some time have other origin is a key try to put the key in different form AES or TKIP nbest one TKIP.
Check to security type.
kevwright said:
I have it set for Use Server Assigned IP Address, but in the field below, I get this odd stuff fe80:221:e8ff:fe88 instead of 192.xxx.xxx.xxx that should be in there.
Click to expand...
Click to collapse
That looks like an IPv6 address as opposed to an IPv4 address, so I guess your router must be using IPv6. Does it not do this for your other devices? Maybe your router's DHCP serves up an IPv6 address because it detects that the TG01 can handle it. What happens when you try to do something meaningful on the network?
try and change your router security from wep (i assume it is due to a problem i have) and that seems to solve it,did for me neway and you are probably right about the chipset,
bojan6 said:
That is your IP. You need to configure it with get automatic IP or put you the IP but is more complicated.
This problem have origin be tween router and mobile or pc. Some time routers didn't assign an IP address.
Some time have other origin is a key try to put the key in different form AES or TKIP nbest one TKIP.
Check to security type.
Click to expand...
Click to collapse
Is it an IP address, all my other devices show 192.168.xxx.xxx, not seen that format before.
Checked the AES/TKIP thing, and tried both to no effect.
Also tried to set a static IP, but no dice.
Kev
paroariax said:
That looks like an IPv6 address as opposed to an IPv4 address, so I guess your router must be using IPv6. Does it not do this for your other devices? Maybe your router's DHCP serves up an IPv6 address because it detects that the TG01 can handle it. What happens when you try to do something meaningful on the network?
Click to expand...
Click to collapse
Hrmm, IPv6 address looks like
2001:0db8:3c4d:0015:0000:0000:abcd:ef12
Which is not really what I have, and nothing else uses it, in fact can not see any reference to IPv6 on the router.
Kev
useyourfist said:
try and change your router security from wep (i assume it is due to a problem i have) and that seems to solve it,did for me neway and you are probably right about the chipset,
Click to expand...
Click to collapse
Security is WPA2-PSK, which to be fair works on lots of other devices, and I don't really wanna mess with them
Kev
Put your configuration here and lets check if we have the same.
I have a similar issue using a Siemens Gigaset SE587 ADSL router at home with the wireless security set to WPA/WPA2 - it will happily connect me once, but subsequent attempts fail unless I reset the router. Other access points are fine. For example, there is a BTOpenZone router not far outside that I can connect to at will, with no problem. Also, the router we use at work happily embraces the TG01's desire to connect.
The SE587 has been a bit temperamental with certain other devices so I wonder if the issue is the slightly fussy router rather than the phone?
Oh well .. I'm picking up a second hand Belkin 54g router soon, so hopefully this will solve it.
Ok guys this problem how I said his origin is to not assign one IP address correctly. This problem is because of WPA2 crypt key.
Turn of your security in your router and try to connect and lets start talk then.
that address (the numbered one) looks like a mac address, if you log on to your router, set up a rule with that mac address and/or ip addres (try 192.168.0.4, its usually free unless you have more than 4 connected devices, if you have then up the 4 to a 6) and restart the connection
it may help or it may do nothing or i might be wrong
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
This has been plaguing me for a few days now and I just want to share the solution I found for you guys. Have you ever had this issue? Your selected wireless network has been working great for days and suddenly one day it refuses to connect anymore. I would hit connect and the phone would be stuck in a "Obtaining IP address from WIFINETWORK" "Disconnected" "Scanning" cycle and so forth. You can wait forever and the phone will never connect to wifi.
The first time this happened to me I did a hard reset. Worked like a charm, I was able to use the network again for a few days until it began happening again. I decided a reset was not the solution so I looked for an answer. I happened upon sites like this:
http://anxiousnut.wordpress.com/201...d-obtaining-ip-address-wifi-issue-workaround/
Where certain solutions were posted but none seemed to work for me. I decided that it definitely wasn't my router (although some said resetting your wireless router may also work sometimes).
I finally stumbled upon the answer. The solution is to use a static ip by going into to Settings>Wireless & Networks>Wi-Fi settings>Menu Click to Advanced and then check Use static IP. You must figure out these values: IP Address, Gateway, Netmask, DNS 1, DNS 2.... Luckily, it is pretty easy.
IP ADDRESS
To find this, go back and select your wifi network. Hit "Modify" and see the IP address listed. Copy that down, this is your IP Address.
GATEWAY
This is your router's IP address. You will need a computer that is connected to the network already. For Windows, run a command prompt and type ipconfig to show you the default gateway address. For Mac, go to the network preference pane in system preferences. Click advanced and go to TCP/IP tab.
NETMASK
You will find this in the previous step. Often it is 255.255.255.0.
DNS 1
Put in the same IP you found for the gateway box.
DNS 2
Same as above.
In the end it will look something like this:
IP Address: 192.168.1.107
Gateway: 192.168.1.1
Netmask: 255.255.255.0
DNS 1: 192.168.1.1
DNS 2: 192.168.1.1
Connect again and it works. No need to factory reset. Enjoy!
Update: After a few days, something in the phone's wifi settings seem to "correct" itself and your wifi will not work with this method anymore. Simply go back and disable static IP and your phone will be back to its old self again. If the symptoms appear again, you can follow these steps again.
I wonder if this will help with eclipse 2.0.3 disconnecting issues
Sent from X2 Eclipsed using xda app
I was having this problem with CM7 and this fixed it. Thanks!
thanks solved my problem i m so very grateful
Careful, this "fix" could be very temporary... If you set a static IP and do not configure your router to use static IPs you will at some point run into conflicting IPs if you have other devices on the network. The router is dynamically allocating IP addresses if you use a standard DHCP setup and can give your chosen IP for your phone to any device on the network, creating a situation when you cannot connect or you can connect but it does not work. If you want to use static ips on your phone with the router, you have to configure the router to understand this by disabling DHCP and setting up static IPs for all devices or by allocating fixed IP for certain MAC addresses. SO either setup both your phone and router to use a static IP or change the DHCP lease time to something other than "infinity" .
Most routers strart DHCP allocation at .100. Check with your particular routers manual. If you assign the IP less than .100 you should be fine as long as you don't assign another device with the same IP.
Sent from my MB870 using Tapatalk 2
A workaround != A fix.
DigitalMD said:
Careful, this "fix" could be very temporary... If you set a static IP and do not configure your router to use static IPs you will at some point run into conflicting IPs if you have other devices on the network.
Click to expand...
Click to collapse
I'm with DigitalMD - this is a very kludgy "fix" that will lead to trouble in the future. I am coming to believe there is a consistent interoperability issue between Android and some other systems (OS X and some routers??) that leads to issues - both my GN with 4.0.4 and my JetStream with 3.1 will routinely fail to connect both to my Mac (10.7) and the routers, primarily in a couple of particular offices - maybe it's just a high-noise area (one is an older building). The devices both connect fine to my home wifi (WRT54G) and most internet cafes.
Not a good fix
This isn't really a fix for the problem. I connect to multiple wireless networks, between work and home and friend's houses, and they all have different routers. Setting a static IP is impractical, because I have to turn it on with certain networks and off with other networks, or change the static IP from one router to another.
Why does this happen? It works fine for a while, then one day it just doesn't want to take an IP address from the router. For me, it works fine at home and at my parents, but at work, it doesn't want to connect anymore. It's been connecting fine for months, then yesterday it got stuck with obtaining IP.
Setting a static IP isn't a solution; it's a cop-out. Does anybody know why this happens? Does anybody know how to fix it?
I was experiencing this from past couple of days than I just put static IP works really great for me :laugh: it was a biggest headache, now past.
I am currently on Genesis3D v6.1 ICS sense 3.6, everything is perfect except wifi. It could be turn on,it can successful search wifi, it can connect to any hot spot, and succesully get ip address, however the internet is not transmitting any data. I tried quite few different internet router (public and private ) I still cannot access internet through wifi. Any one has idea about what's going on?:angel:
Check what ip yer getting at home. I had a similar issue with wifi. Turns out it had some weird ip address. I assigned a static, rebooted and runs great...
It's most likely the router. Also, depending on Internet provider, the modem could be at fault. Comcast does something stupid where new devices connected are blocked or something. I have had other people's laptops connect to my wifi but be denied Internet access. Have to reset the modem and router or something stupid to connect the first time.
Sent from my PG86100 using XDA
monkey3ddd said:
Check what ip yer getting at home. I had a similar issue with wifi. Turns out it had some weird ip address. I assigned a static, rebooted and runs great...
Click to expand...
Click to collapse
I used static ip at home, I am sure the ip address is correct, it is in the same ip domain as my computer. it is not a wired ip address.
gk1984 said:
It's most likely the router. Also, depending on Internet provider, the modem could be at fault. Comcast does something stupid where new devices connected are blocked or something. I have had other people's laptops connect to my wifi but be denied Internet access. Have to reset the modem and router or something stupid to connect the first time.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
I dont think it is the router, I tried different routers, and I also tried public hotspot. all the wifi I tried does not work. however, the IP address issued to my phone is totally good.
I have the same problem with every sense 3.6 ROM, and with Sense 4.0 or 3.0 (with GB) works perfectly...
Anyone knows how to solve it, please?
I had the same problem only when using a static IP address.
Changing the subnet mask to 32 (although 32 stands for 255.255.255.255 and is obviously wrong) worked for me
ScrewL00se said:
I had the same problem only when using a static IP address.
Changing the subnet mask to 32 (although 32 stands for 255.255.255.255 and is obviously wrong) worked for me
Click to expand...
Click to collapse
Awesome!! It also worked for me!
Thank you very much!! ^^
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
I get that around my office as I walk around, I find that when I change AP in range my internet connection drops. I have to constantly disable/re-enable WiFi.
Even around my house, I have the handset to WiFi always on, yet when I wake up in the morning the internet connection is not working yet there is an IP. I couldn't be bothered to telnet to port 80 etc., but I hear that the Jellybean update will resolve this issue.
Same problem
nickzap said:
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
Click to expand...
Click to collapse
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Phoenix_Dean said:
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Click to expand...
Click to collapse
Me too... Is anybody has solution for this issue?
Oh poor fellows ....try to add DNS manually according to your ISP...not add public DNS
Try forgetting the network and connecting again and make sure all the other devices are using different ip address
Sent from my GT-I9300 using xda app-developers app