I am currently on Genesis3D v6.1 ICS sense 3.6, everything is perfect except wifi. It could be turn on,it can successful search wifi, it can connect to any hot spot, and succesully get ip address, however the internet is not transmitting any data. I tried quite few different internet router (public and private ) I still cannot access internet through wifi. Any one has idea about what's going on?:angel:
Check what ip yer getting at home. I had a similar issue with wifi. Turns out it had some weird ip address. I assigned a static, rebooted and runs great...
It's most likely the router. Also, depending on Internet provider, the modem could be at fault. Comcast does something stupid where new devices connected are blocked or something. I have had other people's laptops connect to my wifi but be denied Internet access. Have to reset the modem and router or something stupid to connect the first time.
Sent from my PG86100 using XDA
monkey3ddd said:
Check what ip yer getting at home. I had a similar issue with wifi. Turns out it had some weird ip address. I assigned a static, rebooted and runs great...
Click to expand...
Click to collapse
I used static ip at home, I am sure the ip address is correct, it is in the same ip domain as my computer. it is not a wired ip address.
gk1984 said:
It's most likely the router. Also, depending on Internet provider, the modem could be at fault. Comcast does something stupid where new devices connected are blocked or something. I have had other people's laptops connect to my wifi but be denied Internet access. Have to reset the modem and router or something stupid to connect the first time.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
I dont think it is the router, I tried different routers, and I also tried public hotspot. all the wifi I tried does not work. however, the IP address issued to my phone is totally good.
I have the same problem with every sense 3.6 ROM, and with Sense 4.0 or 3.0 (with GB) works perfectly...
Anyone knows how to solve it, please?
I had the same problem only when using a static IP address.
Changing the subnet mask to 32 (although 32 stands for 255.255.255.255 and is obviously wrong) worked for me
ScrewL00se said:
I had the same problem only when using a static IP address.
Changing the subnet mask to 32 (although 32 stands for 255.255.255.255 and is obviously wrong) worked for me
Click to expand...
Click to collapse
Awesome!! It also worked for me!
Thank you very much!! ^^
Related
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
So, my WiFi network is set up for static IP addresses, and with the ICS leak, the WiFi won't transmit any data when I set my network up. It connects just fine but won't transmit any data.
At first I thought it was my attempt at making an ICS ROM (based off of the PG86IMG.zip/RUU) so I tried other people's with the same result. DHCP works fine though.
Can someone test Static IP addresses with their phone on this ICS leak?
It does work you will need to use 24 for network prefix if you are a class C (why they didn't stick with standard subnet mask 255.255.255.0 I dont know...) and you will need to use your local DNS servers.. I was able to connect to my local network and using the IP address see the routers just fine...I had to go back and change the default DNS used, to my local router's to see the internet and all was good....
It works exactly like it should on my wpa2 24bit subnet.
That's strange, because I had someone else confirm it didn't work either.
I am using 24 for the network prefix.
My network is set up like this:
ip 192.168.1.101
gateway 192.168.1.35
prefix 255.255.255.0/24
dns 208.67.222.222
dns2 208.67.220.220
wpa2
It connects but doesn't transmit data. This setup works on my TouchPad with CM9 alpha just fine, but on the phone it's a no go.
I wonder if it's a router setting I need to change. I use a DLink DIR655.
Any ideas?
*troll post*
freeza said:
That's strange, because I had someone else confirm it didn't work either.
I am using 24 for the network prefix.
My network is set up like this:
ip 192.168.1.101
gateway 192.168.1.35
prefix 255.255.255.0/24
dns 208.67.222.222
dns2 208.67.220.220
wpa2
It connects but doesn't transmit data. This setup works on my TouchPad with CM9 alpha just fine, but on the phone it's a no go.
I wonder if it's a router setting I need to change. I use a DLink DIR655.
Any ideas?
Click to expand...
Click to collapse
Can't even ping from it?
Mine is connecting through a 1131AG Cisco wap here at work. At home I use a DDWRT based router.
:edit:
prefix 255.255.255.0/24
Just put 24 in prefix area.
CiDhed said:
Can't even ping from it?
Mine is connecting through a 1131AG Cisco wap here at work. At home I use a DDWRT based router.
:edit:
prefix 255.255.255.0/24
Just put 24 in prefix area.
Click to expand...
Click to collapse
Yeah, I have just 24 in there. I have no idea why i wrote that instead lol
I have it exactly how it is on my TouchPad (which works) and it's a no go :\
I have the same behavior! I have 4 SGS2 with OFFICIAL 4.0.3 release. 3 of them are OK, the fourth I had to force a static 192.168.0.x/24 address. And I have 5 other wireless devices (laptops and net tops) connected and working!!!
Nett tools app shows me unbelievable results like wrong routes and 0.0.0.0 gateway!
Oh, my God, what a BUG!
I guess it's should be in Q&A ?
#JustMy2Cent
Tomqerz said:
I guess it's should be in Q&A ?
#JustMy2Cent
Click to expand...
Click to collapse
Most definitely not. This is a development issue because it has to do with leaked software. no one in Q&A will bother to look, or care.
CiDhed said:
Can't even ping from it?
Mine is connecting through a 1131AG Cisco wap here at work. At home I use a DDWRT based router.
:edit:
prefix 255.255.255.0/24
Just put 24 in prefix area.
Click to expand...
Click to collapse
I was gonna say...I refuse to use anything that's not DD-WRT compatible on my home network. You just never know what kind of silly settings will be present in OEM router firmware.
freeza said:
That's strange, because I had someone else confirm it didn't work either.
I am using 24 for the network prefix.
My network is set up like this:
ip 192.168.1.101
gateway 192.168.1.35
prefix 255.255.255.0/24
dns 208.67.222.222
dns2 208.67.220.220
wpa2
It connects but doesn't transmit data. This setup works on my TouchPad with CM9 alpha just fine, but on the phone it's a no go.
I wonder if it's a router setting I need to change. I use a DLink DIR655.
Any ideas?
Click to expand...
Click to collapse
Hi!
My friend just now had the exact same problem as you.
He updated his Xperia Active to ICS today and lost WiFi settings.
When I input the same router's settings as they were on GB they refused to work --> WiFi router connected, but internet, google play, apps,... didn't work.
Problem was, because I had static IP settings and I didn't input ALL fields in one stroke in advanced menu.
After I deleted the initial WiFi connection from his list, I used this tutorial:
http://forum.xda-developers.com/showthread.php?t=1577877
My config is:
IP: 192.168.1.21
gateway: 192.168.1.1
network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
I left "4.4.4.4" because it took me a while to configure everything and my friend was in a hurry. Everything works because it relies on working first DNS: "8.8.8.8" (Google's DNS).
Right numbers for DNS 2 are either "192.168.1.1" (Router's IP) or "8.8.4.4" (Google's backup DNS).
I didn't know I had to input ALL fields in one stroke!
What router you have? S. Ip works for me on my dlink dir655
Sent from my EVO 3D Sprint/Virgin Mobile Hybrid.
Reset modem and u should then be good to go
Sent from my PG86100 using xda premium
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
I get that around my office as I walk around, I find that when I change AP in range my internet connection drops. I have to constantly disable/re-enable WiFi.
Even around my house, I have the handset to WiFi always on, yet when I wake up in the morning the internet connection is not working yet there is an IP. I couldn't be bothered to telnet to port 80 etc., but I hear that the Jellybean update will resolve this issue.
Same problem
nickzap said:
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
Click to expand...
Click to collapse
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Phoenix_Dean said:
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Click to expand...
Click to collapse
Me too... Is anybody has solution for this issue?
Oh poor fellows ....try to add DNS manually according to your ISP...not add public DNS
Try forgetting the network and connecting again and make sure all the other devices are using different ip address
Sent from my GT-I9300 using xda app-developers app
Hello guys, i have a problem about connecting to wifi. I have been using the same ROM for a year, but since this morning i have a problem on connecting to the wifi, it says Obtaining ip address but it just never ends. I changed the ROM two times today, nothing has changed. I think the problem might me caused by the wifi antenna itself just because it's old (bought the device two years back), but i mostly believe in it's an inner software error, if there is a possibility about it's a software error can you help me to find out what it is and fix it?
Thank you (Device-> YP-G70)
FIGURED OUT HOPE THIS HELPS ALL OF YOU:
Use static ip on wifi settings, and as ip address i don't know if this works in all countries but enter 192.168.1. (some value between 1 and 200) as gateway enter 192.168.1.1 and as netmask you can use 255.255.255.0 this solved my problem thanks
Happened to me once...wiping data fixed it. You should try that.
Sent from my YP-GI1 using xda app-developers app
drakonizer said:
Happened to me once...wiping data fixed it. You should try that.
Sent from my YP-GI1 using xda app-developers app
Click to expand...
Click to collapse
I tried that way and it didn't work out but finally i figured out what happened, i had the same problem a month ago on all my computers and tablets and phones they didn't connect to my wifi so i entered other ip adresses gateways etc. that i found on a webpage and they connected, the thing is i found the ip online and when you enter it on two devices working on same network it will discconnect one of the devices, does anyone know where can i find more alternatie ips' like that? Hope that will be helpful to the friends who has obtaining ip address loop problem.
isitan said:
I tried that way and it didn't work out but finally i figured out what happened, i had the same problem a month ago on all my computers and tablets and phones they didn't connect to my wifi so i entered other ip adresses gateways etc. that i found on a webpage and they connected, the thing is i found the ip online and when you enter it on two devices working on same network it will discconnect one of the devices, does anyone know where can i find more alternatie ips' like that? Hope that will be helpful to the friends who has obtaining ip address loop problem.
Click to expand...
Click to collapse
Let me see if I understand what you're trying to do. You have multiple devices, not just your YP-G70, connected to a router. The router is distributing IP's, some of which are static, some of which are DHCP. The key is to make the router assign static IP's outside the DHCP range.
For instance, if your router has a gateway 192.168.1.1 with a subnet mask of 255.255.255.0, that gives you 254 addresses to choose from. Typically, the DHCP range is fifty addresses, from 192.168.1.100 to 192.168.1.149. So long as you assign your static IP's outside the range of .100 to .149, you should have no conflicts. I generally assign printers, NAS, other services lower IP's. 192.168.1.4 might be a printer. 192.168.1.6 might be a PogoPlug. Desktops/laptops with static IP's might be in a range of 192.168.1.20 to 192.168.1.40. Tablets and phones might be from .60 to .80. When friends and extended family visit and want to borrow some wifi or ethernet, they use the DHCP range -- .100 to .149.
Make sure to use the most secure method for wifi available on the router, usually WPA2 Personal (PSK) + TKIP / AES. Give your friends the random-10-digit-or-more-character password you created to keep your wifi secure, and they're in. If you have trouble getting in, delete the saved wifi connection to your router in the network connections area on the YP-G70 and recreate it. You should be in.
Did you changed your router before? I had same problem AFTER changed my router (from old router linksys 54mbps mode 11b/g, now using tp-link 300 mbps mode 11b/g/n)... i've tried several type and brand (tp-link, tenda etc.), same results. My assumption for now, YP-G70 is not compatible with router above 54mbps or mode above G.
Just my two cents.
arronov said:
... My assumption for now, YP-G70 is not compatible with router above 54mbps or mode above G. ...
Click to expand...
Click to collapse
On a lark, I set my ASUS RT-N16 router using tomato-USB firmware to N-only. I am assuredly connected via my YP-G70. Samsung bills the YP-G70 as b/g/n compatible. Perhaps the problem is with one or more specific router models?
Laughter On Water said:
On a lark, I set my ASUS RT-N16 router using tomato-USB firmware to N-only. I am assuredly connected via my YP-G70. Samsung bills the YP-G70 as b/g/n compatible. Perhaps the problem is with one or more specific router models?
Click to expand...
Click to collapse
After i'm going back to stock rom (G70XXKD6), wifi's going back to normal. Even when it paired with any N mode router. So the main problem because i'm using custom rom
Hi!
I just got my new Honor 7 and I'm now experiencing a major flaw: I can connect to my WIFI, but won't get Internet connection.
Details:
- Wifi router supports 2.4Ghz and 5Ghz, same error on both.
- IP Configuration (DNS, Gateway, DHCP) set to same as on Laptop and other android devices - all other devices working fine
- When connected to Wifi, Phone can be pinged by other devices & phone can ping other devices
- Phone cannot ping the router but is shown in it's "connected devices" list (correct MAC adress and everything)
- When opening a Wifi Hotspot from my Notebook (forwarding the router's wifi), Phone can connect to internet & ping router (everything works perfectly)
How is it possible that if my Notebook forwards the router's wifi everything works perfect but I can't get it working by connecting directly?
Hope any of you can help me with my problem!
Best regards
Do you use a MAC filter? Sounds like your router blocks the connection.
Gesendet von meinem PLK-L01 mit Tapatalk
Nope, no MAC-Filter in use!
As i said the device gets listet among all other (working) devices in the router's DHCP devices list...
Sounds like a router issue. Any way to check if WiFi works on somebody else's WiFi? Suggest maybe change channels that WiFi is transmitting on the router
admisi said:
Sounds like a router issue. Any way to check if WiFi works on somebody else's WiFi? Suggest maybe change channels that WiFi is transmitting on the router
Click to expand...
Click to collapse
The Wifi on the device seems to work fine:
Wifi Hotspot made by notebook works, Public Wifi at Shopping Mall worked fine .. Checking more Networks tomorrow!
\\EDIT: Both Networks at my University work fine.
Is your subnet mask 255.255.255.0 or something else for the gateway? This affects the network prefix length. Also check DNS, try static setting instead of dhcp and use Google DNS 8.8.8.8 and 8.8.4.4
---------- Post added at 08:46 AM ---------- Previous post was at 08:12 AM ----------
What is Gateway IP address and what is the Subnet mask?
admisi said:
Is your subnet mask 255.255.255.0 or something else for the gateway? This affects the network prefix length. Also check DNS, try static setting instead of dhcp and use Google DNS 8.8.8.8 and 8.8.4.4
---------- Post added at 08:46 AM ---------- Previous post was at 08:12 AM ----------
What is Gateway IP address and what is the Subnet mask?
Click to expand...
Click to collapse
Subnet mask is 255.255.255.0 , according to that prefix length is set to 24.
Can't get DNS , nothing changes when changing to google!
I noticed that when I do an arp scan for the network, I can find other devices but not the router. On my old phone the router will show up on arp scan!
If router can see phone, then assign it static IP address, then add that IP address to DMZ - that way it's fully open. Sadly with routers it's a matter of narrowing down the problem with trial and error to resolve. You can also try temporarily deactivating firewall, and/or temporarily removing WiFi security to see if any difference.
admisi said:
If router can see phone, then assign it static IP address, then add that IP address to DMZ - that way it's fully open. Sadly with routers it's a matter of narrowing down the problem with trial and error to resolve. You can also try temporarily deactivating firewall, and/or temporarily removing WiFi security to see if any difference.
Click to expand...
Click to collapse
Router can see phone! I have just added it's temporary IP as DMZ Host to check whether it solves the problem - and it does!
When the phone is set as DMZ Host in the router it can ping the router and connect to the internet (so far it seems like any other device).
Before setting the static IP and using this method permanently, I'd like to ask if this causes any changes to other users in the Network ? I am sharing the router with two other people using it for phones, tablets, IPTV etc.
I'm sorry I have no idea what DMZ is exactly.
Thank you very much for your help so far!
No problem. It's not really a permanent solution as it just opens up the IP address to all traffic. It does mean that the router is somehow blocking the phone in normal conditions. This could be for all sorts of reasons, firewall rules on the router, or port forwarding, or Mac filtering, or IP filtering, difficult to say. DMZ shouldn't affect the other users.
Sent from my PLK-L01 using Tapatalk
I'm not too sure about this router's configuration because it is a rather cheap NoName device provided by the ISP while at my home I'm used to AVM devices.
But I can nowhere spot any specific rules, there's not even a single port-forwarding set on the device. So I can't spot anything that could be blocking my phone :.
Anyway I have just removed my phone from DMZ, reconnected it to the Wifi and so far it's still working fine!
Even if I have to re-do this procedure every now and then after device reboots it shouldn't be a problem.
I have no Idea on how temporary setting it up as DMZ haschanged everything, but for now I'd consider the issue solved! I owe you one for this
Sorry that i have to reopen this old thread but i have the same problem with my HONOR 7.
I have Wifi Connection on my phone but the internet isnt working.
Curious is the fact that this problem only happens in my wifi at home and at my girlfriend (same router and telecommunication provider).At other wifi's everything is working fine.
I hope you can help me.
(sorry for the bad english)
MaxMonument94 said:
Sorry that i have to reopen this old thread but i have the same problem with my HONOR 7.
I have Wifi Connection on my phone but the internet isnt working.
Curious is the fact that this problem only happens in my wifi at home and at my girlfriend (same router and telecommunication provider).At other wifi's everything is working fine.
I hope you can help me.
(sorry for the bad english)
Click to expand...
Click to collapse
Set the Wifi band permanent anywhere between 1 to 10 and try connecting it.
vsriram92 said:
Set the Wifi band permanent anywhere between 1 to 10 and try connecting it.
Click to expand...
Click to collapse
Tested all 10 channels but still no internet.
Also tested disabling the WPA/WPA2 PSK safety but same result.
Put it in DMZ, find DHCP table and see which IP adress phone get, put that adress in DMZ, DMZ settings are on the same place as NAT (usually). I think that phone cannot get DNS server from router because of some rule in firewall, but try to ping 8.8.8.8 from phone without setting up DMZ, if DNS is problem he should ping that adress but not be able to load page in browser....
@ MaxMonument94 can u connect to any other Wifi ? or all having same issue ?
The internet connection is working in any other network exept the network at my girlfriends place but she has the same router/provider as i have.
If there are any german users, we both got “telecolumbus“ as internet provider.
Now its just more curious.
After i entered the IP in DMZ my ookla speedtest on my phone showed perfect results.
Also the Chrome browser loaded pages and other apps (like 9GAG, Telegram, Whatsapp) worked for a while without any problem.But after a while they all got connection problems (page dont load, waiting for connection on telegram, GIFs dont load).
After that i started a new speedtest and the results were again quite good.
Then the same procedure again and again.
I have really no clue what kind of problem that is.
Btw: my mobile internet was disabled all the time to dont distort the results.
When that happens again, try to ping 8.8.8.8 and tell me what is output, remember ping it when it wont work....
I have pinged 8.8.8.8 with Android Terminal Emulator
The results in the screenshot.