After Installing custom ROM jelly bean or kitkat my xperia neo v is freeze at Welcome Screen. Touch Screen is not working. Only volume key and power button are working. i flash haida kernel for jelly bean or kitkat,but still not working :crying:
Any Solution ?
gunkyudi said:
After Installing custom ROM jelly bean or kitkat my xperia neo v is freeze at Welcome Screen. Touch Screen is not working. Only volume key and power button are working. i flash haida kernel for jelly bean or kitkat,but still not working :crying:
Any Solution ?
Click to expand...
Click to collapse
No worries dude.....if you have flashed a jelly bean rom now just download fusion or super fusion kernel for haida and flash via fastboot.... It should solve the issue.... If installed custom rom is kit kat, flash kernel from the rom zip or you can try dark kernel.....
If it do not solve the issue flash full stock ftf.... then flash any good kernel of your choice....
vipinpvarghese said:
No worries dude.....if you have flashed a jelly bean rom now just download fusion or super fusion kernel for haida and flash via fastboot.... It should solve the issue.... If installed custom rom is kit kat, flash kernel from the rom zip or you can try dark kernel.....
If it do not solve the issue flash full stock ftf.... then flash any good kernel of your choice....
Click to expand...
Click to collapse
thanks for your solve my problem, but i flash stock rom ics or gb ?
gunkyudi said:
thanks for your solve my problem, but i flash stock rom ics or gb ?
Click to expand...
Click to collapse
flash ics... you will get all the details and tutorial from the below link by vimjam....
flash 4.1.B.0.587
http://forum.xda-developers.com/showthread.php?t=1409269
After flashing this you can flash any kernel and supporting ROMs...... Remember to enable USB debugging after flashing stock rom... That's something we may forget always....:silly:
vipinpvarghese said:
flash ics... you will get all the details and tutorial from the below link by vimjam....
flash 4.1.B.0.587
http://forum.xda-developers.com/showthread.php?t=1409269
After flashing this you can flash any kernel and supporting ROMs...... Remember to enable USB debugging after flashing stock rom... That's something we may forget always....:silly:
Click to expand...
Click to collapse
thanks, i will to try your advice
help,, i'am still no to flash kitkat or jellybean,:crying:
sorry my english bad :crying:
Related
i have xperia sola android version 2.3.7 , kernal version 2.6.35.7+ and build number 6.0.B.1.564 i was trying to install PURE BLOOD ROM v1.0 - The Ultimate Stock Xperience(ics)
and according to tutorial
i installed rom via CMW v5
but when i restarted the phone
it stuck on the sony logo and keep restarting
i restored the earlier ROM which i backup-ed.
i Want to install that stocked based custom rom how to install please clarify me
i tried many times but unable to install that rom...
That rom is based on ics not gb my friend
First flash ics. Then use that rom
drsanket_xperia_u said:
That rom is based on ics not gb my friend
First flash ics. Then use that rom
Click to expand...
Click to collapse
you mean first i have to flash with official stock rom or what??Plz tell me..
You need the ICS stock rom first to get the kernel.
Look for the global ICS file in the forums. It's on a torrent.
nishangrg said:
you mean first i have to flash with official stock rom or what??Plz tell me..
Click to expand...
Click to collapse
Yes u should read that rom is based on 6.1 not 6.0 (gb)
So if u want that rom just flash 6.1.b.1.10 and then flash the pure blood rom as per instructions
After installing pureblood ROM via CWM,switch off the phone and then flash .54 Kernel through flashtool by putting in fastboot mode.No need for installing stock ics.I can provide you the kernel file,if you need.
waht is best between Ultimate sola and pure blood?
ultimate saola is v1, it's mean that pure blood v2 is most recent?
akp.ajinkya said:
After installing pureblood ROM via CWM,switch off the phone and then flash .54 Kernel through flashtool by putting in fastboot mode.No need for installing stock ics.I can provide you the kernel file,if you need.
Click to expand...
Click to collapse
plz provide me the link i want to try..
drsanket_xperia_u said:
Yes u should read that rom is based on 6.1 not 6.0 (gb)
So if u want that rom just flash 6.1.b.1.10 and then flash the pure blood rom as per instructions
Click to expand...
Click to collapse
so you mean i should flash 1st ICS Stock Firmware which is in the extension .ftf through flashtool? right?
and Plz if i had to flash ICS stock Firmware.ftf file through flashtool then plz give me a tutorial to flash
i want to flash ICS on my xperia sola.. i want to upgrade my GB to ICS with Custom rom....
akp.ajinkya said:
After installing pureblood ROM via CWM,switch off the phone and then flash .54 Kernel through flashtool by putting in fastboot mode.No need for installing stock ics.I can provide you the kernel file,if you need.
Click to expand...
Click to collapse
They are different ROMs. One is stock lite (All bloat removed). The other is stock enhanced.
Check the thread to see which is which.
Snowstormzzz said:
They are different ROMs. One is stock lite (All bloat removed). The other is stock enhanced.
Check the thread to see which is which.
Click to expand...
Click to collapse
Yups,I know the difference,i have used both of them.Also pureblood s .54 based and ultimate sola is .10 based.
---------- Post added at 06:22 PM ---------- Previous post was at 06:17 PM ----------
nishangrg said:
plz provide me the link i want to try..
Click to expand...
Click to collapse
Here's the link:https://www.box.com/s/o6i2gh5hymxxgiohh8im
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
http://forum.xda-developers.com/showthread.php?t=1920187
this link has for SK15i. i tried searching the other threads with no luck.
I am new to this flashing so sorry if i asked in wrong thread or something.
Thanks in advance
iamkiu said:
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
http://forum.xda-developers.com/showthread.php?t=1920187
this link has for SK15i. i tried searching the other threads with no luck.
I am new to this flashing so sorry if i asked in wrong thread or something.
Thanks in advance
Click to expand...
Click to collapse
the link you posted has .587 firmware for mini pro.... download it....
you have to flash it first by using flash mode and then you will find boot.img in the zip file of Xtream Bean ROM V 3.0....
extract boot.img from zip and flash it in fastboot mode.... now go to CWM recovery and follow the instructions
iamkiu said:
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
Click to expand...
Click to collapse
I guess it's not really necessary to flash the .587 kernel first... just go ahead flashing the boot.img from inside the zip and boot in cwm recovery and flash the rom
If you really want the kernel, take it from here
thanks for ur reply
mihahn said:
I guess it's not really necessary to flash the .587 kernel first... just go ahead flashing the boot.img from inside the zip and boot in cwm recovery and flash the rom
If you really want the kernel, take it from here
Click to expand...
Click to collapse
but from installation from http://forum.xda-developers.com/showthread.php?t=2350427
Download Xtream Bean Rom V3.0 and the Fix.zip
Copy them to your SD Card
Flash the .587 Kernel First !
Click to expand...
Click to collapse
says to flast this kernal first.
I tried with out doing it but i landed into some bugs for which flashing this kernal is must?
Please suggest if I am wrong
Thanks a lot
iamkiu said:
says to flast this kernal first.
I tried with out doing it but i landed into some bugs for which flashing this kernal is must?
Please suggest if I am wrong
Thanks a lot
Click to expand...
Click to collapse
Normally there should be no problem just because you didn't flash the .587 kernel first, but you can try flashing the stock .587 kernel I posted earlier and then the boot.img you take from the rom.zip
Did you wipe before installing v3? Sometimes there are problems because you didn't wipe, but I don't know about the rom...
mihahn said:
Normally there should be no problem just because you didn't flash the .587 kernel first, but you can try flashing the stock .587 kernel I posted earlier and then the boot.img you take from the rom.zip
Did you wipe before installing v3? Sometimes there are problems because you didn't wipe, but I don't know about the rom...
Click to expand...
Click to collapse
Thanks a lot for ur kernal. it worked fine aftet flasing the ftf.
and btw, i wiped cache and dalvik too
Regards,
iamkiu
Hi
I have a Xperia neoL Phone.
after installing any custom kernels with proper custom rom my touch screen stops working
and it doesnt work at all but physical buttons are working fine.
I have tried every appropriate rom for Neol with its Proper kernel In this forum and xperia Play forum, but no one had touch screen working for me.
Please help me.
I really want to install custom Roms
Does your touchscreen work when you flash a stock ftf?
Sent from my MT25i using xda app-developers app
reflash the stock .ftf installed on your device when touch was working fine and see if your touch works
if not
reflash all the available stock .ftf s to make sure if its a hardware isssue or software
no need to say if these didnt work its probably a hardware issue and get your phone to sony servive center
hossein7292 said:
reflash the stock .ftf installed on your device when touch was working fine and see if your touch works
if not
reflash all the available stock .ftf s to make sure if its a hardware isssue or software
no need to say if these didnt work its probably a hardware issue and get your phone to sony servive center
Click to expand...
Click to collapse
Thanks for your reply
I dont have any problem in stock .631 .587 or other stock roms
My only problem is with custom kernels . when installing custom kernel touch will not work
4n00p said:
Does your touchscreen work when you flash a stock ftf?
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
yes my touch has no problem with any stock rom.
karo222 said:
yes my touch has no problem with any stock rom.
Click to expand...
Click to collapse
Then i think its because the kernel didint flash properly how did u flash the kernel?
4n00p said:
Then i think its because the kernel didint flash properly how did u flash the kernel?
Click to expand...
Click to collapse
I tried all ways
using Quickimg flashtools and using cmd but all was the same
firs time when i get the phone and it was on official rom .631 I rooted it installed Nxt kernel using quickimg and installed Honami rom and it worked fine
But after some days I want to install jb roms and as I remember I installed Lupus jb kernel and after that my touch stopeed working I have tried al other kernels available for neo L but no one has touch working.
Even in Nxt kernel with honami rom that i used first time with no problem , it has no touch
the only way I have touch is with official roms....
karo222 said:
I tried all ways
using Quickimg flashtools and using cmd but all was the same
firs time when i get the phone and it was on official rom .631 I rooted it installed Nxt kernel using quickimg and installed Honami rom and it worked fine
But after some days I want to install jb roms and as I remember I installed Lupus jb kernel and after that my touch stopeed working I have tried al other kernels available for neo L but no one has touch working.
Even in Nxt kernel with honami rom that i used first time with no problem , it has no touch
the only way I have touch is with official roms....
Click to expand...
Click to collapse
Have you used flashtool???
also does touch work when you use the TWRP in turbo kernel or is it only when you boot into the system?
4n00p said:
Have you used flashtool???
also does touch work when you use the TWRP in turbo kernel or is it only when you boot into the system?
Click to expand...
Click to collapse
Yes I used flashtools for flashing kernel and stock roms.
touch is not working in TWRP also and I have to use CWM recovery for flashing rom
karo222 said:
Yes I used flashtools for flashing kernel and stock roms.
touch is not working in TWRP also and I have to use CWM recovery for flashing rom
Click to expand...
Click to collapse
hey guys i have the same problem exactly does anyone have any solution for this i've searched a lot no one really knows what is the problem
Any Solutions.............?
Did anyone find any solution for this problem. Please help us....
Hi, im having an issue with my Xperia U.
The touchscreen only work in some roms, JB and KitKat dont work, some ICS too...
on MIUIv5 work and Infity Rom v3 too.
What can be this problem?
iced2009 said:
Hi, im having an issue with my Xperia U.
The touchscreen only work in some roms, JB and KitKat dont work, some ICS too...
on MIUIv5 work and Infity Rom v3 too.
What can be this problem?
Click to expand...
Click to collapse
if touchscreen also fails in stock roms ...relock BL , reflash ur backed up .ta partition .... give it to sony for touchscreen issues .. else maybe u are not flashing the kitkat/jb roms properly
suyash691 said:
if touchscreen also fails in stock roms ...relock BL , reflash ur backed up .ta partition .... give it to sony for touchscreen issues .. else maybe u are not flashing the kitkat/jb roms properly
Click to expand...
Click to collapse
I follow this video for JB:
for kitkat I only flashed in cwm... doing wipe in what the post say.
iced2009 said:
I follow this video for JB:
for kitkat I only flashed in cwm... doing wipe in what the post say.
Click to expand...
Click to collapse
try devswift's jb ..... and kitkat first u hv to fastboot flash boot.img then go to cwm then flash rom (at least for xperia go this is hw u do it)
Im currently running KitKat for my sola and wanted to flash a JB rom. The right way to do it is flash a JB kernel and then flash the JB rom?
Use flash tool or flash via CWM custom rom .
AGeraldes said:
Im currently running KitKat for my sola and wanted to flash a JB rom. The right way to do it is flash a JB kernel and then flash the JB rom?
Click to expand...
Click to collapse
Yea. Flash JB kernel and then flash rom via CWM