Finally! - Ornate TrueSmart

Well, it isn't a dev edition and wasn't rooted when I got it, but I finally got my truesmart. Rooted with framaroot and installed the play store. Will be playing with it for a while and then will get to developing things.
Sent using XDA-funded carrier pigeons

The prerooted "Developer Edition" is like the cake. Glad you finally got it though.

At least it was signed with engineering keys, eh ?

There is no cake. And aren't they all? Lol!
Sent using XDA-funded carrier pigeons

Holy crap, finally. Glad to hear though! I hope you haven't totally given up on the thing yet, as I still use mine daily =P

Well, the Truesmart may not be dead just yet!!
ClearD was one of the Top Developers for the MotoActv and extended its capabilities beyond what most would think possible.
He will surely breathe some needed life back into this device!!!

Yes! Glad you got it ClearD
I was using your work on the MotoActv

Before we mere mortals get too excited, let's see if even ClearD can compile a bootable firmware from whatever sources are available...

Gonna be a while, getting used to it for now. Thank God for button savior though. Lack of back button is annoying as hell. First thing I'm gonna try to do is remap the buttons...
Sent using XDA-funded carrier pigeons

ClearD said:
Gonna be a while, getting used to it for now. Thank God for button savior though. Lack of back button is annoying as hell. First thing I'm gonna try to do is remap the buttons...
Click to expand...
Click to collapse
I tweked an existing XPosed module to remap buttons.
http://forum.xda-developers.com/showthread.php?t=2714281
I believe something like that should be in by default, but I probably want more features anyway.
However, I would like to revoke other specials: the back/menu swipes (at least temporarily) as well as status bar always on (expanded desktop in GravityBox).
A fully working ROM with at least 4.3 for BTLE is also something to wish for....

Clear, if you plan on holding onto it for a while I'll hit you up later when I get my hands on more KK source.

Glad to see you finally got your watch. There are still many people who haven't. Checking the kickstarter page reveals Omate keep making promises about posting but then the tracking numbers show they have never shipped.
Perhaps if Omate hadn't diverted kickstarter watches to their commercial enterprises then all backers would now have them.

Hello Mr. ClearD . Greetings from Hong Kong Glad to hear that you have received yours !! I have also just received it last week !
I have been using your Rom for my Motoactv and it is REALLY GREAT !!!!
MOTOACTV is good at running and exercise . But when daily use, i found it is too big .
Therefore , I think OMATE is really the answer for me for daily use. I
I hope you would make a good rom for this good watch. I think Omate is almost there but without a good rom.
And till now, I cant really find a good launcher for Omate

Congratz ClearD for finally receiving the Omate!:highfive:
I still use your ROM for my MotoACTV and it was the best one out there! I REALLY hope you stick around and keep doing what you do! :good:
What version do you have? I have two omates, both 1/8 2100. One got seriously bricked when I tried getting TWRP on it. The other one I haven't dared to do anything with. But I realize I need to patch it for security sake. Have you done that yet? Is it resonably safe afterwards to use with your google account?
I will be following this closely! I have new hopes now! I´ll definetily donate if you start developing for the omate!
Cheers mate! :laugh::victory:

-Android Freak- said:
Congratz ClearD for finally receiving the Omate!:highfive:
I still use your ROM for my MotoACTV and it was the best one out there! I REALLY hope you stick around and keep doing what you do! :good:
What version do you have? I have two omates, both 1/8 2100. One got seriously bricked when I tried getting TWRP on it. The other one I haven't dared to do anything with. But I realize I need to patch it for security sake. Have you done that yet? Is it resonably safe afterwards to use with your google account?
I will be following this closely! I have new hopes now! I´ll definetily donate if you start developing for the omate!
Cheers mate! :laugh::victory:
Click to expand...
Click to collapse
Seriously bricked? Totally fixable.
Sent from my GT-P5110 using Tapatalk 2

kuronosan said:
Seriously bricked? Totally fixable.
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
Well, You are probably right. But I tried reflashing it a thousand times with many different backups, my own initial backup, backup from the other watch, backup from different people on XDA. Don't know what to do else...

-Android Freak- said:
Well, You are probably right. But I tried reflashing it a thousand times with many different backups, my own initial backup, backup from the other watch, backup from different people on XDA. Don't know what to do else...
Click to expand...
Click to collapse
Let's start from the beginning. Tell me what problem you're having, what caused it, and details about the unit you received. I also need to know OS version, what drivers you have, etc. Be detailed where you can.
I'd be willing to bet it can be fixed, even if you have to send it to me to fix it.

kuronosan said:
Let's start from the beginning. Tell me what problem you're having, what caused it, and details about the unit you received. I also need to know OS version, what drivers you have, etc. Be detailed where you can.
I'd be willing to bet it can be fixed, even if you have to send it to me to fix it.
Click to expand...
Click to collapse
That's very kind of you.
I can't remember exactly because it was long ago but this is roughly what happened:
1/8/2100 4th shipping list (received 21st may in Europe)
Then I tried flashing TWRP and I bricked it. It wouldn't even start.
I used SP flash tool to flash my original scatter file on the watch but it is stuck at the boot logo. I have ADB shell and MTKDroid works.
Now after I restored/flashed my backup scatter file with SP Flash Tool It seems stuck at the logo... Waited 10 minutes.. no vibrating...
To be honest I'm more inclined to getting the working Omate patched for security issues than getting this watch to work.

Do me a favor and use your emmc scatter, flash the 0513 firmware from my thread in development. Flash the patch file lk and boot.img with updated twrp.
Also, post the first few entries in your scatter from the backup (preloader,mbr).
Sent from my GT-P5110 using Tapatalk 2

kuronosan said:
Do me a favor and use your emmc scatter, flash the 0513 firmware from my thread in development. Flash the patch file lk and boot.img with updated twrp.
Also, post the first few entries in your scatter from the backup (preloader,mbr).
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
I would love to, but I'm on vacation now and don't have access to my backup files. I do have the other working Omate with me. Can I use a backup from that one? They´re most certainly from the same batch since they arrived two weeks apart in may.
Working Omates files as requested:
Preloader http://tempsend.com/CD3063CCBF
MBR http://tempsend.com/1DAEB79D62
Edit:
Ok, tried using the working Omates scatterfile I just created and used your may shipment firmware provided in your dev thread. It now has a new NICE logo, but it's stuck there and boot loops. I'll continue investigating and trying different things.

Related

Is this fixable? Broken atrix :(

Hard to explain in text, here is a video:
NSFW (language):
http://www.youtube.com/watch?v=g8Rx2NvNb1A
Please advise?
it should be fixable, depending on if the screen setup is one assembly, then its going to cost you, im pretty sure its the digitizer that you cracked or damaged, i will look and see what i can find for you
Are you running any ROMS? If so, try flashing a new one. If you are just at stock phone, try flashing the stock firmware over from the Motorola website. All directions are there and firmwares.
Also are you rooted or/and have an unlocked bootloader.
I am hoping it's a software glitch but it's probably a hardware issue.
Sent from my ATRIX 4G XDA Premium App
I don't see any cracks, could be sub surface maybe? I think digitizers are like 50 bucks.
One guy told me digitizers either work or they don't, there is no half working. Is that not true?
Edit: just saw your post Voelker, yes I am running Alien through RomRacer's CWM.
I wish I could get to my TiBu and MyBackup apps
Your in luck, this is what you need, http://www.ebay.com/itm/AT-T-Motoro...ultDomain_0&hash=item4aaa0e3c28#ht_3026wt_907
can you repair it yourself is the wuestion.
Damn thats crucial. I know this is prob not the most helpful idea but I guess worth a try.. Have you downloaded the Touchscreen Booster app to see if it makes a difference? You can have it pushed to your phone via the Android Market on a computer, just select the Atrix and your phone should download it automatically. The dropdown box you need to change is right about where your top row of keys is so maybe just maybe.. Try the "super optimized" setting. Sorry I cant be more help, hope you get it resolved.
you are wrong, digitizers can do what yours is doing, ive had it happen a few times to my past iphones, i posted a link for you that should fix it
Smittyzz said:
Your in luck, this is what you need, http://www.ebay.com/itm/AT-T-Motoro...ultDomain_0&hash=item4aaa0e3c28#ht_3026wt_907
can you repair it yourself is the wuestion.
Click to expand...
Click to collapse
I think I can. I have taken apart phones before and I've seen several helpful threads on the subject. I guess I'll go ahead and order one, I don't think a ROM flash will work (but I guess since it's free I'll go ahead and try it first)
WiredPirate said:
Damn thats crucial. I know this is prob not the most helpful idea but I guess worth a try.. Have you downloaded the Touchscreen Booster app to see if it makes a difference? You can have it pushed to your phone via the Android Market on a computer, just select the Atrix and your phone should download it automatically. The dropdown box you need to change is right about where your top row of keys is so maybe just maybe.. Try the "super optimized" setting. Sorry I cant be more help, hope you get it resolved.
Click to expand...
Click to collapse
I would but I can't get to my apps at all.
Smittyzz said:
you are wrong, digitizers can do what yours is doing, ive had it happen a few times to my past iphones, i posted a link for you that should fix it
Click to expand...
Click to collapse
Ok, thanks very much
Guys, do you know if I use RomRacer's backup utility, is it a complete 100% backup? Meaning if I flash a ROM to it, and it doesn't fix, can I use the backup to go back to the way it was before the install?
k4zyn said:
I think I can. I have taken apart phones before and I've seen several helpful threads on the subject. I guess I'll go ahead and order one, I don't think a ROM flash will work (but I guess since it's free I'll go ahead and try it first)
I would but I can't get to my apps at all.
Ok, thanks very much
Guys, do you know if I use RomRacer's backup utility, is it a complete 100% backup? Meaning if I flash a ROM to it, and it doesn't fix, can I use the backup to go back to the way it was before the install?
Click to expand...
Click to collapse
Your welcome, and youtube is your friend with this one lol
never used romracer so no idea =p lol
lol, can you tell I was pretty severely hung over? haha
Yea, pretty noticable lol. lucky for me, i dont get them, i have adhd(stopped taking medds for them 2 years ago so i dont consider i have it) but it did give me one good thing lol
New ROM didn't work, digitizer is on the way. I'll let you all know how it goes.
k4zyn said:
New ROM didn't work, digitizer is on the way. I'll let you all know how it goes.
Click to expand...
Click to collapse
Alright sounds good, did you order one from that link i gave you?
I have uses that company...no problems.
Before you change the digitizer check out the youtube vids. It isn't hard just requires patience especially fitting the new one.
Sent from my MB860 using XDA App
Ok guys, got the digitizer in today. I've been looking at youtube videos, this guy has some questions that I haven't been able to find answers for.
http://www.youtube.com/watch?v=C8oONtqdHrA&feature=related
will I run into these problems?
k4zyn said:
Ok guys, got the digitizer in today. I've been looking at youtube videos, this guy has some questions that I haven't been able to find answers for.
http://www.youtube.com/watch?v=C8oONtqdHrA&feature=related
will I run into these problems?
Click to expand...
Click to collapse
observe how it comes off when you take it apart =p
havent had to touch my atrix yet so i dont know for sure, but if something were to happen im sure you could get another digitizer free from that ebay guy.
Smittyzz said:
observe how it comes off when you take it apart =p
havent had to touch my atrix yet so i dont know for sure, but if something were to happen im sure you could get another digitizer free from that ebay guy.
Click to expand...
Click to collapse
That's what I figured. The guy sounds old (no offense to you older guys) but sometimes older guys like to rip stuff apart without taking the time to really watch what you're doing.
I assume superglue will work fine to put the pieces back together?
k4zyn said:
That's what I figured. The guy sounds old (no offense to you older guys) but sometimes older guys like to rip stuff apart without taking the time to really watch what you're doing.
I assume superglue will work fine to put the pieces back together?
Click to expand...
Click to collapse
that would work, but i wouldnt recoment it. if you read the comments they will give you good tips too im only 19 and ive torn apart blackberys and every version of the iphone(ive owned 8 total) i dont have issues with electornics or little parts, but you are right for (no offece) older people, or elders, they tend to lets say... slip or something and screw it up, you could even record yourself and watch it after.
---------- Post added at 12:13 AM ---------- Previous post was at 12:11 AM ----------
for the glue, use a blow drier, ir buy some adhesive superglue i think is a no no because it fuses the 2 things together, that could screw stuff up. just my 2 cents
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
also keep me posted on your operation
Welp, it's fixed, aside from a few qualms. One, the prox sensor doesn't work. Two, I didn't clean off the old adhesive stuff well enough and the screen is slightly bulged out. Not a big deal but it is what it is.
Overall, I kind of wish I would have just spent the 20 bucks extra and claimed insurance on it. Oh well. I'll probably do it sometime after tax season next year when I have some money to waste on it. For now, it'll do.
k4zyn said:
Welp, it's fixed, aside from a few qualms. One, the prox sensor doesn't work. Two, I didn't clean off the old adhesive stuff well enough and the screen is slightly bulged out. Not a big deal but it is what it is.
Overall, I kind of wish I would have just spent the 20 bucks extra and claimed insurance on it. Oh well. I'll probably do it sometime after tax season next year when I have some money to waste on it. For now, it'll do.
Click to expand...
Click to collapse
Hey its now working, wait till taxes and get something new like the sgs2 hd that was announced today!
Check it out at redmondpie.com scroll down till you find it, its gonna be a beast
Sent from my MB860 using xda premium

[Q] Kocaso M730W ICS upgrade help

I bought an M730W about a month ago from geeks. It came with 2.3.4 on it. I searched high and low to find the ICS for it since I'd seen that the same model is out and comes with it installed. I finally contacted Geeks to see if they could get me in touch with the manufacturer. They had no contact info. Finally after digging around I noticed something with the name of the US based company that hold the patent rights to it. I then dug more and got their number and while I was on hold I found their site. At this address (mymidpad dot com forward slash Downloads_M730Flash dot html) iwas was able to obtain a good manual and the updated firmware. Inside the installer it comes with PhoenixUSBPro, an IMG file and a key. During the install it said it was installing drivers to my laptop but I can not find them when I connect my tablet. The only way that I can apply the update is to have my M730W connected to my machine in a way that it's recognized. The only way for me to do so now is to connect as a USB storage device which does me no good when it comes to using the included software and firmware for updating. So my question is, does anyone know what I can do to resolve this issue?
Hey Tod. I also have the m730w. ICS is definitely available for the tablet but theres a catch. Since its a tablet(a generic one at that) you have to use a program for your pc called Live Suite which is primarily used for the ainovo tablets but can be used with any generic tablet. I cant do it right now but most likely tonight, ill post the links and the information on how to upgrade to ics. im currently running 4.0.3 flawlessly and much faster and smoother than GB. and i have full root which i can also show you how to do. just let me know
Ace1tk said:
Hey Tod. I also have the m730w. ICS is definitely available for the tablet but theres a catch. Since its a tablet(a generic one at that) you have to use a program for your pc called Live Suite which is primarily used for the ainovo tablets but can be used with any generic tablet. I cant do it right now but most likely tonight, ill post the links and the information on how to upgrade to ics. im currently running 4.0.3 flawlessly and much faster and smoother than GB. and i have full root which i can also show you how to do. just let me know
Click to expand...
Click to collapse
That's killer Ace, thank you so much!!! Mine came rooted, which has been a blessing. Whenever you can get the information to me is fine. I'll do a search for Live Suite and see if I can at least get that step taken care of.
m730w weird screen
I hav same tab, worked great until about the 5th rom i tried, now my touch screen is off, you hav to touch dn to the left of where u want..or off to the side.. now any rom i flash has same issue.. do u hav the stock rom or now of a fix for this..any help... i tried links and site would not load..to u hav original rom thanks
Anyone have a step by step of how to do this? I'd really like to run CM9 on it, but have no idea how to even boot into recovery mode. Where's the youtube video?
dogginky said:
I hav same tab, worked great until about the 5th rom i tried, now my touch screen is off, you hav to touch dn to the left of where u want..or off to the side.. now any rom i flash has same issue.. do u hav the stock rom or now of a fix for this..any help... i tried links and site would not load..to u hav original rom thanks
Click to expand...
Click to collapse
I don't have just the rom. What I've got is the package that can be downloaded from their site. I don't have enough posts in to put an external link in my posts here. I'd try using a different browser and going to the URL I cheated into my OP. Just replace "dot" with "." and "slash" with "/". The software doesn't install the drivers properly on Vista though so you will want to be aware of that.
Any other word??? I want to update my neice's if at all possible.
Wow, here are the instructions! Good luck!
http://mymidpad.com/M730W Refresh instruction.pdf
Bump.
I have searched this exhaustively! I still don't know what ROM to download or how to boot into recovery mode. The guy above who posted about Live Suite? Haven't heard back from him. I downloaded that, but without the ROM, I don't see the point in even setting it up. I'm not particular about which ROM, as long as it's newer than the one on here, preferable CM7 or newer, but beggars can't be choosers emmirite??!!
AuGmENTor said:
Bump.
I have searched this exhaustively! I still don't know what ROM to download or how to boot into recovery mode. The guy above who posted about Live Suite? Haven't heard back from him. I downloaded that, but without the ROM, I don't see the point in even setting it up. I'm not particular about which ROM, as long as it's newer than the one on here, preferable CM7 or newer, but beggars can't be choosers emmirite??!!
Click to expand...
Click to collapse
Well, well, well. Someone gave me a POS Kocaso M750B and I've been on a search to do something else with it. And I find a good chap from the epic 4G forums.
Did you ever make any progress getting any other rom on your el cheapo tablet?
bypod said:
Well, well, well. Someone gave me a POS Kocaso M750B and I've been on a search to do something else with it. And I find a good chap from the epic 4G forums.
Did you ever make any progress getting any other rom on your el cheapo tablet?
Click to expand...
Click to collapse
LOL. Hi there. Nope. Not a damn thing have I done with mine. It is sitting on my desk. I let my son play Minecraft on it on long rides, and I use it as backup for my phones camera. I know it could be so much smoother, but is being crippled by it's OS. If I could ficgure out how to boot it into recovery I might risk bricking it with a questionable ROM. But I can't find the ROM OR the means by which to boot into recovery. In truth though, I mainly got it to patootz with. I'm more of a laptop kind of guy anyway.
AuGmENTor said:
LOL. Hi there. Nope. Not a damn thing have I done with mine. It is sitting on my desk. I let my son play Minecraft on it on long rides, and I use it as backup for my phones camera. I know it could be so much smoother, but is being crippled by it's OS. If I could ficgure out how to boot it into recovery I might risk bricking it with a questionable ROM. But I can't find the ROM OR the means by which to boot into recovery. In truth though, I mainly got it to patootz with. I'm more of a laptop kind of guy anyway.
Click to expand...
Click to collapse
If you don't know, there's no chance any of us ever will. Someone got this for free at some promotion and handed it off to me, so I'm out absolutely nothing. Just a bummer there isn't more to do with it. You'd think that all these POS tablets would just share the same mainboard and proc, so that some standard JB rom would work for all of them. The screen is terrible and it registers touches so poorly that many games are just unplayable. But, if I give it to one of my nieces or nephews, I'll be a hero!
Thanks though!
bypod said:
If you don't know, there's no chance any of us ever will. Someone got this for free at some promotion and handed it off to me, so I'm out absolutely nothing. Just a bummer there isn't more to do with it. You'd think that all these POS tablets would just share the same mainboard and proc, so that some standard JB rom would work for all of them. The screen is terrible and it registers touches so poorly that many games are just unplayable. But, if I give it to one of my nieces or nephews, I'll be a hero!
Thanks though!
Click to expand...
Click to collapse
Yes you will be a hero. I'm sure there are generic ROMS that would work with this. A) I have no idea where they would be. and B) I don't know how to flash them. If I found one I suspected was close, I might try to ODIN it on there.
Try this. http://forum.xda-developers.com/showthread.php?t=2343531

[Q] New to the Galaxy 5.0, where should I begin?

So my friend gave me his Samsung Galaxy 5.0 (I think it's USA?) today, and I was wondering what I should do to it. I own a Nook Color and have CM7 running from an SD card, but I'm pretty sure it's different for the Player. I think I would rather not root it and would prefer a custom ROM, but I'm not sure how/which one to pick. I found JoyOS, CM7, and CM9, but I don't know which one I should get.
Unfortunately, my friend dropped it a few days ago, cracking the screen. The screen and touch screen still work, but it's cracked and annoying to work with. He never got the warranty, but is it possible to get the glass replaced?
Alright, I've managed to get CWR installed using this guide, and from there I installed JoyOS and it's working pretty well so far.
ignore this
You have a list here so you decide
http://forum.xda-developers.com/showthread.php?t=1720457
Sent from my YP-G70 using xda app-developers app
Your gonna find that a lot of the tips and insight for this particular device are hit or miss. One key thing to remember is that this device is not a phone so the temptation to leap into things may be a bit higher than with your phone (taking the root/rom route on your phone carries a higher risk, so more people that would not normally go this route are). That being said, there are some serious threads and some "not so serious" threads, good advice, and not so good advice. So use your best judgement and ask if your really not sure on something.
Now that's out of the way, your gonna find that the Gingerbread based roms on this device are all relatively stable with minimal bugs - try all of them is my recommendation! The ICS ones, some that are still in development all have some issues one way or another. This is gonna be up to you and your uses for the device to decide whether or not the bugs are ok for you. The Cyanogen based roms are pretty spectacular if their limitations work well for you.
Do research, read, read, read and you'll begin to get a general feel for what people are liking and not liking. I am a pusher of trial and error, but only if your comfortable with continually modifying your device. Flash on my friend and have fun!
annoyingduck said:
-snip-
Click to expand...
Click to collapse
Thanks for the advice! I think I like messing with this than my Nook, there's a lot more stuff to do instead of "put this image on your SD card and you're done." I finally got the market to upgrade to Play in JoyOS and replaced the boot animation, and I'm enjoying this one so far. I think I'll give LewaOS a try tomorrow.
So, does anyone know if it's possible to get a screen replacement for this? Or is it better just to get a screen protector and hope this doesn't get any worse.
Googie2149 said:
Alright, I've managed to get CWR installed using this guide, and from there I installed JoyOS and it's working pretty well so far.
Click to expand...
Click to collapse
I've also followed that cwm install to a 'T'. but still no cwm. as a matter of fact it didn't even install the kernel even tho it said "passed" in odin. i hope someone'll b able to answer this soon.
Sent from my YP-G70 using xda app-developers app
Googie2149 said:
So, does anyone know if it's possible to get a screen replacement for this? Or is it better just to get a screen protector and hope this doesn't get any worse.
Click to expand...
Click to collapse
Yes, you'll have to send it to the nearest Samsung Service Center.
They will replace it for you, but without a warranty you will definitely be paying out of pocket.
I can only speculate that it would cost you somewhere in the range of $75~$100.
Please, do not quote me on that figure! I am only guessing, but I can't imaging that it's a cheap fix.
Considering the obsolescence of the Galaxy Player, I'm not sure paying for a screen repair would be worth it.
Call Samsung's Service Center and get a quote.
But, if the cost of repair is more than the half of the device's value,
I would save the money and get a more technologically current device that is WIFI-only.
Stock-based ROM
I would recommend you flash a stock based ROM unless you know a lot about Android, because non stock-based ROMs have a lot of bugs.

[Q] Bricked Asus C300

Hi, folks.
I've got a hard bricked Asus C300. I accidentally flashed the wrong ROM. When I turn it on, I only get a power light, and none of the refresh key combos have worked.
I figure my best option to get this working again is to attempt to flash the NAND with the proper image for the device, but I cannot figure out where I would attach the BusPirate to do so, as there is no enumeration on the NAND chip.
What I can tell you is that it looks a bit like a chip on a stick of RAM... however, it has no solder 'leads' coming from it. There are 4 VERY small dots of solder on each side of the chip, though. They do not appear to be making contact with the NAND in any way. Attached is an image similar to what it looks like.
I've googled around quite a lot, but I can't seem to find any other way to get this repaired, or any documentation on flashing a Sandisk NAND. No one seems to have been stupid enough to have my issue before, which is a real shame!
If anyone has any suggestions or ideas on how to get this Chromebook up and running again, I'd be forever grateful!
You chromebook is died...
Sent from my GT-I9195 using XDA Free mobile app
AbsoZed said:
Hi, folks.
I've got a hard bricked Asus C300. I accidentally flashed the wrong ROM. When I turn it on, I only get a power light, and none of the refresh key combos have worked.
I figure my best option to get this working again is to attempt to flash the NAND with the proper image for the device, but I cannot figure out where I would attach the BusPirate to do so, as there is no enumeration on the NAND chip.
What I can tell you is that it looks a bit like a chip on a stick of RAM... however, it has no solder 'leads' coming from it. There are 4 VERY small dots of solder on each side of the chip, though. They do not appear to be making contact with the NAND in any way. Attached is an image similar to what it looks like.
I've googled around quite a lot, but I can't seem to find any other way to get this repaired, or any documentation on flashing a Sandisk NAND. No one seems to have been stupid enough to have my issue before, which is a real shame!
If anyone has any suggestions or ideas on how to get this Chromebook up and running again, I'd be forever grateful!
Click to expand...
Click to collapse
I'd suggest contacting JohnLewis by email or on his google plus. I was the one that was the original tester for the C300 BIOS builds so he may be of some help as he was going to buspirate my system if it bricked testing his stuff. Sorry to hear it turned out that way, but I can say after it was all done, it was worth the risk.
kdb424 said:
I'd suggest contacting JohnLewis by email or on his google plus. I was the one that was the original tester for the C300 BIOS builds so he may be of some help as he was going to buspirate my system if it bricked testing his stuff. Sorry to hear it turned out that way, but I can say after it was all done, it was worth the risk.
Click to expand...
Click to collapse
You were the original tester for his ASUS C300 BIOS builds?
Sent from my HTC One M9 using Tapatalk
---------- Post added at 11:31 PM ---------- Previous post was at 11:26 PM ----------
AbsoZed said:
Hi, folks.
I've got a hard bricked Asus C300. I accidentally flashed the wrong ROM. When I turn it on, I only get a power light, and none of the refresh key combos have worked.
I figure my best option to get this working again is to attempt to flash the NAND with the proper image for the device, but I cannot figure out where I would attach the BusPirate to do so, as there is no enumeration on the NAND chip.
What I can tell you is that it looks a bit like a chip on a stick of RAM... however, it has no solder 'leads' coming from it. There are 4 VERY small dots of solder on each side of the chip, though. They do not appear to be making contact with the NAND in any way. Attached is an image similar to what it looks like.
I've googled around quite a lot, but I can't seem to find any other way to get this repaired, or any documentation on flashing a Sandisk NAND. No one seems to have been stupid enough to have my issue before, which is a real shame!
If anyone has any suggestions or ideas on how to get this Chromebook up and running again, I'd be forever grateful!
Click to expand...
Click to collapse
OP, you're looking for a small-ish black square on the BOTTOM of the main board (yes it's a PITA) with 8 legs, 4 on each side
Sent from my HTC One M9 using Tapatalk
drsn0w said:
You were the original tester for his ASUS C300 BIOS builds?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=eKylYaWbb-E
That's from 2 years ago on the original build. I got a few pictures too if you want me to dig them up. It was a proud moment for me for some reason.
kdb424 said:
https://www.youtube.com/watch?v=eKylYaWbb-E
That's from 2 years ago on the original build. I got a few pictures too if you want me to dig them up. It was a proud moment for me for some reason.
Click to expand...
Click to collapse
Are we talking about the same 'book? I didn't even know it was out 2 years ago xD. My apologies, I also worked with John Lewis on the C300, wasn't aware there was work on it beforehand xD.
First of all messed with this https://github.com/drsn0w/chromebook_kernel_tools
Then with him to work on SeaBIOS, Liam Crabbe in the Google plus group.
Again, apologies, just startled me
Sent from my HTC One M9 using Tapatalk
drsn0w said:
Are we talking about the same 'book? I didn't even know it was out 2 years ago xD. My apologies, I also worked with John Lewis on the C300, wasn't aware there was work on it beforehand xD.
First of all messed with this https://github.com/drsn0w/chromebook_kernel_tools
Then with him to work on SeaBIOS, Liam Crabbe in the Google plus group.
Again, apologies, just startled me
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Nope, you are right. We aren't. They need to stop naming them so similar. You have the Asus C300, I have the Acer C300. Sorry for that. I won't be much help here.
kdb424 said:
Nope, you are right. We aren't. They need to stop naming them so similar. You have the Asus C300, I have the Acer C300. Sorry for that. I won't be much help here.
Click to expand...
Click to collapse
Oh jeez. XD well thank you for your work on Chromebooks too! Love seeing people circumventing le big Goog
Sent from my HTC One M9 using Tapatalk

Android Area 51 Down?

Hi everyone I've been trying to check out some Samsung Galaxy Centura ROMs and I know there are some cool ones on Android Area 51 but this whole week it the site seems to have been down. Does anyone know whats going one?
Same story here. Been trying to get on since December. I've been looking for that ARC1.3.zip - if anyone has it I'd appreciate it. That's all I need.
edit: I just got it through a direct link in the Idiot's Guide to rooting centura PDF
So...does anyone actually know what has become of Androidarea51 ??
I've been trying to access that site for some time now and it always fails to load.
Not sure what happened at AA51. They are the reason I got into Android and modding. They covered a lot of the lower-end devices.
In any event, if anyone needs files for the devices I worked on or kept for one reason or another I have files for Lg Optimus Fuel L34C, Lg Optimus Q/Net, ZTE Roamer/Merrit, Samsung Galaxy Proclaim/Illusion, Samsung Galaxy Core Prime/Prevail LTE, and I may still have some files for ST Galaxy S3. (which uses Verizon ROMs and recoveries)
Hit me up if you need anything for these devices.
Sent from my KYOCERA-C6745 using Tapatalk
Thanks for replying RealWelder.
For me AA51 -and- the LG L34C together were what made for a great turning point in my own Android adventures.
I needed a decent low-end device for wifi uses only - and the L34C went on sales for $5 & $10 & I was lucky enough to grab a couple.
If I'd known how good those little phones really were, I'd have gotten 1/2 dozen of them while they were so cheap & still wish I could find a few more to buy cheaply someplace, really !!
Best Wishes.
vtsnaab said:
Thanks for replying RealWelder.
For me AA51 -and- the LG L34C together were what made for a great turning point in my own Android adventures.
I needed a decent low-end device for wifi uses only - and the L34C went on sales for $5 & $10 & I was lucky enough to grab a couple.
If I'd known how good those little phones really were, I'd have gotten 1/2 dozen of them while they were so cheap & still wish I could find a few more to buy cheaply someplace, really !!
Best Wishes.
Click to expand...
Click to collapse
I still have a fuel, but my daughter plays her games on it. Lol. If you are interested in modding your fuels out I got some cool stuff I could share. I've been modding my Tab3, I've went through it and made all the text appearances and icons colorable via color pickers and a RomControl app.
Check out tdunham's Unified TouchWiz mods thread. It is mostly for Samsung's but a lot of the mods are "self-sufficient" so they should work on any device.
Sent from my KYOCERA-C6745 using Tapatalk
My couple of those were slightly modded with the AA51 ROM so as to be rooted & de-krapified.
They get used as terrific MP3 players & GPS units.
If I ever come across a couple more I'll look into making more mods.
For actual cellular uses my favourites are the Kyocera Hydro Icon & the LG Volt - both of which cost around $20 & really satisfy all my phone type needs - also rooted & de-krapified, of course.
There's Android stuff I want to use on the bigger screen - that is my present desire, and I'm hoping for that purpose that Anbox matures quickly.
I know there are other ways to do this, but that one looks most promising for Linux users right now.
Thanks and Best Wishes.
End of the golden age of Android
So sad. First Cyanogenmod site gone, now this. Android hobbyists were edged out by the new compiling method of LP (among other things) and seemed to be a slippery slope of grass-roots support for the platform. Large swaths of the xda forums have become ghost towns.
Not sure if your still trying to find arc1.3 but if my mind serves me correctly I may have it saved to either my laptop or one of my flash drives. I will have to look for it because I had all the aa51 roms for the galaxy Centura as I still have one floating around somewhere with a busted outer glass running arc.
RealWelder said:
Not sure what happened at AA51. They are the reason I got into Android and modding. They covered a lot of the lower-end devices.
In any event, if anyone needs files for the devices I worked on or kept for one reason or another I have files for Lg Optimus Fuel L34C, Lg Optimus Q/Net, ZTE Roamer/Merrit, Samsung Galaxy Proclaim/Illusion, Samsung Galaxy Core Prime/Prevail LTE, and I may still have some files for ST Galaxy S3. (which uses Verizon ROMs and recoveries)
Hit me up if you need anything for these devices.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
I need odin files for the Proclaim/Illusion please
kylelwalker1990 said:
I need odin files for the Proclaim/Illusion please
Click to expand...
Click to collapse
Uploading you a zip right now, I'll post when finished.
It has cwm, twrp, root, return to stock, meid fix, and cwm loop fix. [DO NOT factory reset from Settings, or you'll have to flash loop fix(stock recovery) and then reflash your custom recovery.]
Here you go.
https://drive.google.com/open?id=0B3XczzpnAnvwQWM4Yl8wazRJMXc @kylelwalker1990
Sent from my XT1609 using Tapatalk
Hey all,Android Area 51 is on Facebook.
boogersugar said:
Same story here. Been trying to get on since December. I've been looking for that ARC1.3.zip - if anyone has it I'd appreciate it. That's all I need.
edit: I just got it through a direct link in the Idiot's Guide to rooting centura PDF
Click to expand...
Click to collapse
Is there any way you could uploaded me a copy of TWRP or whatever custom recovery you have for the Centura? I have a buddy needing the recovery.
Update: I got ahold of a cwm for it. It works but doesn't mount all partitions correctly...is this what you have also?
Sent from my XT1609 using Tapatalk
Does anyone have custom ROM for centura? I tried flashing one but all I get is a black screen
---------- Post added at 02:19 AM ---------- Previous post was at 02:12 AM ----------
For any one else interested in the github respitory here it is https://github.com/cmotc/android_product_samsung_centura/tree/master/ROM it has a cwm recovery and a custom kernel image but when flashing results in a black screen
Devmountsu77 said:
Does anyone have custom ROM for centura? I tried flashing one but all I get is a black screen
---------- Post added at 02:19 AM ---------- Previous post was at 02:12 AM ----------
For any one else interested in the github respitory here it is https://github.com/cmotc/android_product_samsung_centura/tree/master/ROM it has a cwm recovery and a custom kernel image but when flashing results in a black screen
Click to expand...
Click to collapse
Yep, type this in your browser ftp://asburycctv.mooo.com/
These are all the area51 centura files i have ever downloaded.... not sure how long i will have these shared publicly, so download and repost (say from google drive, or something), as soon as you get to it.
Thanks and good luck!
Was hoping there would be some more recent Centura development myself, bummer all online sources seem to be gone :/
SIDENOTE: These phones make great security cameras using IP Webcam app by the way
https://play.google.com/store/apps/details?id=com.pas.webcam&hl=en
1branchonthevine said:
Yep, type this in your browser ftp://asburycctv.mooo.com/
These are all the area51 centura files i have ever downloaded.... not sure how long i will have these shared publicly, so download and repost (say from google drive, or something), as soon as you get to it.
Thanks and good luck!
Was hoping there would be some more recent Centura development myself, bummer all online sources seem to be gone :/
SIDENOTE: These phones make great security cameras using IP Webcam app by the way
https://play.google.com/store/apps/details?id=com.pas.webcam&hl=en
Click to expand...
Click to collapse
Thanks for the link,its very appreciated.[emoji4]
@RealWelder hey man do you still have stuff for the optimus zone 2? i think its supposedly the same as the fuel or something
NinjaBoyLao said:
@RealWelder hey man do you still have stuff for the optimus zone 2? i think its supposedly the same as the fuel or something
Click to expand...
Click to collapse
I have stuff for the fuel, but not sure about the zone 2. Is it l40c? I've read before that they were the same device, but just on a different carrier (Verizon instead of ST) but idk if they have same bootloader signature. The images had to be "bumped" in order to pass bootloader. You could try, but it would be at your own risk. If you do, share the results so I'll know if they work on it.
https://drive.google.com/file/d/0B3XczzpnAnvwZTNNZFEtQjVlSlk/view?usp=drivesdk
Sent from my XT1609 using Tapatalk
RealWelder said:
I have stuff for the fuel, but not sure about the zone 2. Is it l40c? I've read before that they were the same device, but just on a different carrier (Verizon instead of ST) but idk if they have same bootloader signature. The images had to be "bumped" in order to pass bootloader. You could try, but it would be at your own risk. If you do, share the results so I'll know if they work on it.
https://drive.google.com/file/d/0B3XczzpnAnvwZTNNZFEtQjVlSlk/view?usp=drivesdk
Sent from my XT1609 using Tapatalk
Click to expand...
Click to collapse
I can't do jack **** to this phone man :laugh::crying: It's got that corrupted memory thing going on, i think it got water damage or something. it has the "boot certification verify" error and it shows up as, no ****, 27 different empty/corrupt usb drives when i plug it into my computer, which has the drivers for it and does somehow recognize it
NinjaBoyLao said:
I can't do jack **** to this phone man [emoji23]:crying: It's got that corrupted memory thing going on, i think it got water damage or something. it has the "boot certification verify" error and it shows up as, no ****, 27 different empty/corrupt usb drives when i plug it into my computer, which has the drivers for it and does somehow recognize it
Click to expand...
Click to collapse
I have one on the same condition. There's no fix unfortunately. The bootloader has been tripped.

Categories

Resources