It seems like I do this for every device I own so I might as well do it here on the S5 as well.
Here you can find every modem currently in existence for the Sprint Galaxy S5 (SM-G900P). We will add more as new builds are released.
Modems control every aspect of communication on your phone. Having the correct modem can influence your data speeds, your phone call quality and more. Different people report better results with one modem or another but there seems to be no rhyme or reason. I recommend flashing them until you find one that works well for you.
Currently the modems available are only available in One-Click or TAR formats. But I have it on good authority that our best and brightest devs are working on a way to flash them in a ZIP...
Each of these modem flashers include both the modem.bin and the NON-HLOS.bin. This ensures that you're running the same build version for both 3G, LTE/4G and Wi-Fi connections and helps prevent connection issues.
As a general reminder, I cannot and will not be held responsible for any issues that arise from improper flashing of these modems.
The modems are listed in the order of most recent to the oldest released.
Please do not post direct links to the modems on the site. All modems are available through the links on this post. Thank you!
KitKat Modems: http://www.rwilco12.com/forum/showthread.php?tid=824
Available Modems (TAR Format): NE5 / ND2 / NCB
Available Modems (One-Click Format): NE5 / ND2 / NCB
Enjoy!
Reserved.
Sweet, will be trying to make them zip flashable. great thread.
Ty sir.
DL links don't work.
HD-man said:
DL links don't work.
Click to expand...
Click to collapse
Yes they do, you just have to follow the link in the OP to rwilco12's website.
Ramer84015 said:
Yes they do, you just have to follow the link in the OP to rwilco12's website.
Click to expand...
Click to collapse
I did, unless I have to be signed in?
Awesome rwilco12 thanks for doing this. :good::good:
It was a huge help with my Sprint Samsung Galaxy S2 Epic 4G touch (man I hated that name...).
HD-man said:
I did, unless I have to be signed in?
Click to expand...
Click to collapse
They should take you to the spot where you select the specific one you want and click on it. Presto download!
Arkanthos2015 said:
Awesome rwilco12 thanks for doing this. :good::good:
It was a huge help with my Sprint Samsung Galaxy S2 Epic 4G touch (man I hated that name...).
Click to expand...
Click to collapse
Only name worse was the Palm Pixi. One of my favorite phones but boy it took forever to live that down with the guys. Lol
rwilco12 said:
They should take you to the spot where you select the specific one you want and click on it. Presto download!
Click to expand...
Click to collapse
Awesome thanks man.
any idea this will work on marshmallow?
tgkobaljr said:
any idea this will work on marshmallow?
Click to expand...
Click to collapse
No they wont.
tdunham said:
No they wont.
Click to expand...
Click to collapse
Do you know where i can obtain one?
"OK4" was last modem now it is "PCA" or "PG1"? OP my not have updated modems in repo?
tdunham said:
No they wont.
Click to expand...
Click to collapse
Is there a tar file for firmware PG1?
Sent from my SM-G900P using XDA-Developers mobile app
Slimegod said:
Is there a tar file for firmware PG1?
Click to expand...
Click to collapse
I do not have any of the latest firmware downloaded to create separate flashable modems.
Sorry.
tdunham said:
I do not have any of the latest firmware downloaded to create separate flashable modems.
Sorry.
Click to expand...
Click to collapse
Do you have any ideas where i can probably find it? Sammobile doesn't have it either.
Sent from my SM-G900P using XDA-Developers mobile app
Slimegod said:
Do you have any ideas where i can probably find it? Sammobile doesn't have it either.
Click to expand...
Click to collapse
It looks like Sammobile is having problems right now so I cant look but it could have been an incremental security patch that will never see a full Tar release.
Meaning the only way to get it is to flash prior full tar and take the OTA update.
This doesn't mean there never will be one available. Sammobile is notoriously slow on posting firmware.
tdunham said:
It looks like Sammobile is having problems right now so I cant look but it could have been an incremental security patch that will never see a full Tar release.
Meaning the only way to get it is to flash prior full tar and take the OTA update.
This doesn't mean there never will be one available. Sammobile is notoriously slow on posting firmware.
Click to expand...
Click to collapse
I did a OTA to PG1 straight from 4.4 so like if i want to return to stuck there is no possible way then right?
Edit: Was wondering, if I had to without bricking my phone, can a downgrade be possible from PG1 to PE2?
Sent from my SM-G900P using XDA-Developers mobile app
Related
This is all I have for now...
Please make sure you check the MD5 sum of the modem before flashing it!
A bad download with a modem is not like a bad download with a ROM! Things can go to hell real quick with a bad modem download!!!
I605VRALJB - Stock release modem.
MD5: 46AFD12412A4C71BAA3383A35521F8B7
I605VRAL4 - OTA 1/18 Modem
MD5: 084D1B4822284A7852163F101AFA94A1
I605VRAC3 - OTA 5/3 Modem
MD5: 0B3A23234E3F721A1A81BF1DB5FA7A30
Download HERE
MOD EDIT: Download link removed with OP's permission.
Hit Thanks! It doesnt cost a penny and goes a long way!
-Scott
Reserved
What are these useful for? I was hoping one day we can flash any rom from all the Varients (well the LTE varients), then just flash the verizon radio and your good to go...........
Can you verify the MD5 because I am getting an extra digit here.
File: I605VRALL4 Modem.zip
CRC-32: d2b34ef9
MD4: 89701243c2d79518bca9c8e13cec219a
MD5: 084d1b4822284a7852163f101afa94a1
SHA-1: 004aec4abe89d7d2f3900a100fdcfaccf91e9c7a
dja2k
adampa1006 said:
What are these useful for? I was hoping one day we can flash any rom from all the Varients (well the LTE varients), then just flash the verizon radio and your good to go...........
Click to expand...
Click to collapse
Actually, you can do that now. And my CleanROM ACE is proof of it.
dja2k said:
Can you verify the MD5 because I am getting an extra digit here.
File: I605VRALL4 Modem.zip
CRC-32: d2b34ef9
MD4: 89701243c2d79518bca9c8e13cec219a
MD5: 084d1b4822284a7852163f101afa94a1
SHA-1: 004aec4abe89d7d2f3900a100fdcfaccf91e9c7a
dja2k
Click to expand...
Click to collapse
My bad... Copy and paste got me...
Correct MD5 for L4 is: 084D1B4822284A7852163F101AFA94A1
scrosler said:
Actually, you can do that now. And my CleanROM ACE is proof of it.
Click to expand...
Click to collapse
Can you elaborate on your answer? You can flash any LTE Variant rom & Flash the verizon radio on top of that && it will work??
Re: [Modem / Basebands][1/20] - The two current modems available
trentb12 said:
Can you elaborate on your answer? You can flash any LTE Variant rom & Flash the verizon radio on top of that && it will work??
Click to expand...
Click to collapse
I am wondering the same thing...
Sent from my SCH-I605 using Tapatalk 2
Scott: for ACE, I presume you go to Recovery select 605VRAL4 flash it and reboot?
Re: [Modem / Basebands][1/20] - The two current modems available
scrosler said:
Actually, you can do that now. And my CleanROM ACE is proof of that.
Click to expand...
Click to collapse
Does it matter what kernel they are using and if it TW or AOSP?
v36sedan said:
Does it matter what kernel they are using and if it TW or AOSP?
Click to expand...
Click to collapse
AOSP is different because the RIL is different otherwise people would just be flashing the builds for T-mo Note II and then these modems (Radios) and be good to go, but it's not that easy unfortunately. I wish it was.
trentb12 said:
Can you elaborate on your answer? You can flash any LTE Variant rom & Flash the verizon radio on top of that && it will work??
Click to expand...
Click to collapse
kwhodson said:
I am wondering the same thing...
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
ronaldheld said:
Scott: for ACE, I presume you go to Recovery select 605VRAL4 flash it and reboot?
Click to expand...
Click to collapse
v36sedan said:
Does it matter what kernel they are using and if it TW or AOSP?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Maybe its time to go to Q/A Forum and start a thread on this?
dcdgoth said:
Is it just me or others experience the same thing? My Next launcher stutters a little bit after flashing VRAL4
Click to expand...
Click to collapse
I have never in my life heard of a radio causing an app to stutter. I think its just you.
Thread Cleaned a little. Please keep this thread on-topic. If you have a problem not related to this thread, please create a new topic in Q&A. Thanks
~ The-Captain
Just to confirm, we can go from one radio to another without a problem, right? Including going back to an earlier radio if need be?
hajabooja said:
Just to confirm, we can go from one radio to another without a problem, right? Including going back to an earlier radio if need be?
Click to expand...
Click to collapse
I have no problems doing so.
I posted the release radio and the OTA radio and have swapped back and forth a couple times each. No negative side affects that I can see.
ronaldheld said:
Scott: for ACE, I presume you go to Recovery select 605VRAL4 flash it and reboot?
Click to expand...
Click to collapse
Yes, correct.
comparioson
scrosler said:
Yes, correct.
Click to expand...
Click to collapse
Thanks Scott.
Promptly saved both files. very handy.
Any difference in the RF performance?
say dbm are they changing when u switch back and forth?
Net speed?
Thanks for your work
Abe
abe_cedar said:
Thanks Scott.
Promptly saved both files. very handy.
Any difference in the RF performance?
say dbm are they changing when u switch back and forth?
Net speed?
Thanks for your work
Abe
Click to expand...
Click to collapse
Hard for me to judge as I have not really had a chance to analyze them 100% at differnt locations.
Its a work weekend and we had a blizzard yesterday so... There were a lot of factors that made ti impossible to get a good baseline.
Right now, I would say they are equal. Maybe an edge to the newer modem but honestly, I cant tell you that for fact.
Just flashed it and is up now. Too early to gauge performance. Thanks Scott.
ronaldheld said:
Just flashed it and is up now. Too early to gauge performance. Thanks Scott.
Click to expand...
Click to collapse
Up as in better signal strength in -dbm's?
Re: [Modem / Basebands][1/20] - The two current modems available
My guess is he ment it was up and running. Perhaps if someone went to a low signal area every day they could compare the two radios? I'll check it out Tuesday, a few of my classes are in rooms with low signal.
Sent from my SCH-I605 using Tapatalk 2
Would like the tar file to update if someone could post
Wouldn't you find it on Samfirmware website?
OP moved here, as this is not for the Development Threads, I will ask you to read the Forum Rules on posting. Thank You.
goldjacket said:
Would like the tar file to update if someone could post
Click to expand...
Click to collapse
flash the at&t version. works just fine
triavq said:
flash the at&t version. works just fine
Click to expand...
Click to collapse
I actually would prefer for someone to actually flash it. Just in the slim chance that the canadian versions received multiwindow
triavq said:
flash the at&t version. works just fine
Click to expand...
Click to collapse
I wish. It gets a fail with odin. On my fresh install stock ics telus note
goldjacket said:
I wish. It gets a fail with odin. On my fresh install stock ics telus note
Click to expand...
Click to collapse
you need to use Odin 3.07 and not 3v1.85 to flash
goldjacket said:
I wish. It gets a fail with odin. On my fresh install stock ics telus note
Click to expand...
Click to collapse
Consult This wonderful guide written by a magnificent shining example of a man for trouble shooting Odin failure issues.
Downloading the Rogers version right now from sammobile/hotfiles. I don't know about including anything more. I do know it is 610MB compared to the 770MB ATT version. Will report back.
studacris said:
Consult This wonderful guide written by a magnificent shining example of a man for trouble shooting Odin failure issues.
Click to expand...
Click to collapse
Good guide.
beirutas said:
you need to use Odin 3.07 and not 3v1.85 to flash
Click to expand...
Click to collapse
Thanks for the tip. I did try 3.0something not sure if it was 3.0.7 that could be my issue. Man I
I spent countless hours trying to get it to work. I'll check the link thanks. Wish I found this link earlier.
Thanks again
Anyone have a flashable zip of the Canadian Roms? I found the at+t ice older and slower than the Canadian ics and with a few menus at+t never had.
I will try them all one day.
written in your mud with my stick
Just one for Telus so far - http://forum.xda-developers.com/showthread.php?t=2268617
Low Battery
I'm trying to update to jb but even though I have 100 percent battery charge, Kies won't update because of "Low Battery Recharge Now" Then Kies shuts down and won't update my phone. I have it set to MTP. Rogers l717ruxlf4, build # imm76d.uxlf4
Disclaimer:
This package is for the Sprint Galaxy S5 (SM-G900P) only. Your device, your responsibility - not ours.
Do not flash this if you do not know what you are doing.
Credits:
Anonymous Sources (for providing and continuing to share relevant info)
@Chainfire (CFAR Prep & Testing Coordination - See post #2)
Rwilco12 (Hosting)
Samsung/Sprint (you didn't come after anyone for the leak. Thank you - and also thanks for testing this one a lot.)
You've been waiting - and now be rewarded with official Lollipop.
Those of you who have been on the NKD leak this won't look too much different.
Link to build:
Full Restore Tar (in self extracting EXE) - Rwilco12
MD5 checksum: 427198343d9b5acca995905f2dff2184
Steps to Flash:
1) Place phone in download mode.
2) Open Odin (I tested using 3.04 and 3.07)
3) Extract tar.md5 file and select in PDA slot.
4) Start Flash and wait for process to complete. (You will see 2 reboots in the process)
Additional notes and links provided in Post #2.
Notes
Rooting Information
Thanks to Chainfire's assistance a CF Auto Root package is available for this build.
You can download it by clicking here.
During testing SuperSU did not pick up that it stuck properly initially.
After KNOX started throwing the warnings it finally settled in. So you may need to play with it to get it to work.
This will likely be the case until an official Lollipop build is released so again, you're warned in advance.
Also, please note that unless it has been corrected the 5.0 compatible version of CFAR is not compatible with earlier versions.
You'll need to find an older version if you want to root on KitKat this way.
Reserved
In case anything else needs noted.
Awesome brother. You work fast!
much love. ty for this
-Deleted- I re-read the post and answered my own question.
Danster840 said:
-Deleted- I re-read the post and answered my own question.
Click to expand...
Click to collapse
Yes... yes you did. And much obliged for that.
Just wanted to say thanks. I've already flashed because I pissed myself when I saw this posted and it was flawless. I was actually looking for this today because for some reason I couldn't download it from the Sammy site. Anyway.....Thank you for posting this so quickly. I really appreciate that.
Can I post a mirror?
Thank you for this!! :good:
Thanks! I know what I'm doing tonight.
Nice thanks.
Any chance of just the OA6 modem for those of us on CM12?
Sweet!
Sent from my SM-G900P using XDA Premium 4 mobile app
Thank you very much for doing this... Everthing worked perfectly through ODIN :good::good:
Thank you for this update.
Thank you!! I had tripped the knox counter and was unable to update. This is working great so far. Resetting everything up now
Downloading now, thank you very much sir!
Oa6 modem
biship said:
Nice thanks.
Any chance of just the OA6 modem for those of us on CM12?
Click to expand...
Click to collapse
@biship
HERE IS THE OA6 MODEM .. use ODIN and flash in PHONE slot... benefit
rlmiller said:
@biship
HERE IS THE OA6 MODEM .. use ODIN and flash in PHONE slot... benefit
Click to expand...
Click to collapse
does it work With nkd base?
eloko said:
does it work With nkd base?
Click to expand...
Click to collapse
yes
So I've been on a slim-stock rooted ROM (I believe this one) of OB1 variety (Lollipop 5.0) and figured why the hell not update to the newest 5.1.1 base since I've been back into phone stuff trying to get my dad's new T-Mo S4 all freshly rooted and updated .
I was thinking of installing this OJ4 (5.1.1) ROM but then noticed that the current modem/kernel/stock .tar files in this wonder thread here say NH4 is the newest version and there's no mention of neither OJ4 nor OB1...which made me have an utter "WTF" moment. Why doesn't that list have either of them on there? My phone's current baseband/moden is OB1, which is what one'd expect from a OB1 ROM without its modem separately updated...but why are NEITHER of them in that list??
Someone please tell me I'm not the only one who finds that downright strange or could help shed light on this mystery, thanks!
TL;DR= Trying to update to OJ4 (5.1.1) and not sure if I have to THEN update everything I can to NH4 after the fact.
Bump, anybody?
iviyth0s said:
Bump, anybody?
Click to expand...
Click to collapse
Probably because that thread has not been updated.
Here is the official firmware update list from T-Mobile for the S5. You can search for custom builds of those if you like.
Sorry, can't post links yet.
//support.t-mobile.com/docs/DOC-10398
mrgoober22 said:
Probably because that thread has not been updated.
Here is the official firmware update list from T-Mobile for the S5. You can search for custom builds of those if you like.
Sorry, can't post links yet.
//support.t-mobile.com/docs/DOC-10398
Click to expand...
Click to collapse
WOW! I feel pretty dumb lol
Thanks for that, repped! Guess I'll go along with the upgrade then and see what trouble I get myself into :good:.
iviyth0s said:
WOW! I feel pretty dumb lol
Thanks for that, repped! Guess I'll go along with the upgrade then and see what trouble I get myself into :good:.
Click to expand...
Click to collapse
Thanks okay. There's a reason they coined the phrase "brain fart". Sometimes something so simple evades you!
I decided to download and collect most of the newer firmware images for our SM-G900P and share them in one convenient place for everyone to find them.
These are all factory images I have personally downloaded from Sammobile for updating my device..
As usual I am in no way responsible for damage done to your device. These images are completely untouched and unmodified.
So far I have collected:
*G900PVPS3CQC1_G900PSPT3CQC1_SPR
*G900PVPS3CPK1_G900PSPT3CPK1_SPR
*G900PVPS3CQD1_G900PSPT3CQD1_SPR
*G900PVPS3CQA2_G900PSPT3CQA2_SPR
*G900PVPU3BOK4_G900PSPT3BOK4_SPR
*G900PVPU3CPH3_G900PSPT3CPH3_SPR
*G900PVPU3CPL2_G900PSPT3CPL2_SPR
Link to Odin:
http://www.mediafire.com/file/b160o6polbwc2c9/Odin_3.10.0.zip
Link to Firmware:
https://www.mediafire.com/folder/brujjvaro2ogo/Odin_images
Feel free to use these at you own will and at your own risk.
Dev's as usual, help yourselves.
Special Thanks to bytes2bits for providing me with a copy of G900PVPS3CQC1_G900PSPT3CQC1_SPR for you guys
If this was helpful in any way, just hit the thanks button.
Reserved
One More For Me
@Moderators: Please feel free to move this thread of not in proper place
Originals
Thx, needed to reset my S5.
tried using pk1 on my s5 but device wont get passed pulsating Samsung logo
THORMUNZ said:
tried using pk1 on my s5 but device wont get passed pulsating Samsung logo
Click to expand...
Click to collapse
I had the same issue coming from OA6 to PK1. It took a few tries to get the MM bootloader loaded that PK1 requires.
m20120 said:
I had the same issue coming from OA6 to PK1. It took a few tries to get the MM bootloader loaded that PK1 requires.
Click to expand...
Click to collapse
I've used these images myself with out any issues using the provided copy of Odin 3.10 without any issues
May I flash the latest firmware, coming from G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip?
hightech316 said:
May I flash the latest firmware, coming from G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip?
Click to expand...
Click to collapse
I don't see why not.
More than 500 downloads and 3 thanks
TWRP fails
Thanks for the files - but when I used TWRP to flash the 3CQC1 zip, it fails saying "invalid zip file format"
What am I doing wrong?
champagne_problems said:
Thanks for the files - but when I used TWRP to flash the 3CQC1 zip, it fails saying "invalid zip file format"
What am I doing wrong?
Click to expand...
Click to collapse
These files have to be flashed using Odin from a computer. They are not TWRP flashable
The~Skater~187 said:
These files have to be flashed using Odin from a computer. They are not TWRP flashable
Click to expand...
Click to collapse
got it, thanks. I was trying to use TWRP because I only have a mac and couldn't use Odin. I borrowed a PC and the files worked great. Thanks again.
No problem, I love to try to help the community. Glad you got it sorted. Cheers!
Anyone has G900PVPS3CQD1 firmware?
bng87 said:
Anyone has G900PVPS3CQD1 firmware?
Click to expand...
Click to collapse
I'm currently trying to download from Sammobile as we speak :good:
Edit: after 9 failed attempts at downloading from Sammobile, I'm taking a break. If anyone manages to get a hold of a copy feel free to let me know and I will add it to the op.
Update:
I have not have the Sprint G900PVPS3CQD1_G900PSPT3CQD1_SPR.zip update now available.
Same Place as Usual
The~Skater~187 said:
I decided to download and collect most of the newer firmware images for our SM-G900P and share them in one convenient place for everyone to find them.
These are all factory images I have personally downloaded from Sammobile for updating my device..
As usual I am in no way responsible for damage done to your device. These images are completely untouched and unmodified.
So far I have collected:
*G900PVPS3CQC1_G900PSPT3CQC1_SPR
*G900PVPS3CPK1_G900PSPT3CPK1_SPR
*G900PVPS3CQD1_G900PSPT3CQD1_SPR
*G900PVPS3CQA2_G900PSPT3CQA2_SPR
*G900PVPU3BOK4_G900PSPT3BOK4_SPR
*G900PVPU3CPH3_G900PSPT3CPH3_SPR
*G900PVPU3CPL2_G900PSPT3CPL2_SPR
.
Click to expand...
Click to collapse
Any way to add dates to the firmware or are they already ordered from newest to oldest?
Thanks for this thread!
xmicroman said:
Any way to add dates to the firmware or are they already ordered from newest to oldest?
Thanks for this thread!
Click to expand...
Click to collapse
I will adjust the op
CQD1 is the latest