I decided to download and collect most of the newer firmware images for our SM-G900P and share them in one convenient place for everyone to find them.
These are all factory images I have personally downloaded from Sammobile for updating my device..
As usual I am in no way responsible for damage done to your device. These images are completely untouched and unmodified.
So far I have collected:
*G900PVPS3CQC1_G900PSPT3CQC1_SPR
*G900PVPS3CPK1_G900PSPT3CPK1_SPR
*G900PVPS3CQD1_G900PSPT3CQD1_SPR
*G900PVPS3CQA2_G900PSPT3CQA2_SPR
*G900PVPU3BOK4_G900PSPT3BOK4_SPR
*G900PVPU3CPH3_G900PSPT3CPH3_SPR
*G900PVPU3CPL2_G900PSPT3CPL2_SPR
Link to Odin:
http://www.mediafire.com/file/b160o6polbwc2c9/Odin_3.10.0.zip
Link to Firmware:
https://www.mediafire.com/folder/brujjvaro2ogo/Odin_images
Feel free to use these at you own will and at your own risk.
Dev's as usual, help yourselves.
Special Thanks to bytes2bits for providing me with a copy of G900PVPS3CQC1_G900PSPT3CQC1_SPR for you guys
If this was helpful in any way, just hit the thanks button.
Reserved
One More For Me
@Moderators: Please feel free to move this thread of not in proper place
Originals
Thx, needed to reset my S5.
tried using pk1 on my s5 but device wont get passed pulsating Samsung logo
THORMUNZ said:
tried using pk1 on my s5 but device wont get passed pulsating Samsung logo
Click to expand...
Click to collapse
I had the same issue coming from OA6 to PK1. It took a few tries to get the MM bootloader loaded that PK1 requires.
m20120 said:
I had the same issue coming from OA6 to PK1. It took a few tries to get the MM bootloader loaded that PK1 requires.
Click to expand...
Click to collapse
I've used these images myself with out any issues using the provided copy of Odin 3.10 without any issues
May I flash the latest firmware, coming from G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip?
hightech316 said:
May I flash the latest firmware, coming from G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip?
Click to expand...
Click to collapse
I don't see why not.
More than 500 downloads and 3 thanks
TWRP fails
Thanks for the files - but when I used TWRP to flash the 3CQC1 zip, it fails saying "invalid zip file format"
What am I doing wrong?
champagne_problems said:
Thanks for the files - but when I used TWRP to flash the 3CQC1 zip, it fails saying "invalid zip file format"
What am I doing wrong?
Click to expand...
Click to collapse
These files have to be flashed using Odin from a computer. They are not TWRP flashable
The~Skater~187 said:
These files have to be flashed using Odin from a computer. They are not TWRP flashable
Click to expand...
Click to collapse
got it, thanks. I was trying to use TWRP because I only have a mac and couldn't use Odin. I borrowed a PC and the files worked great. Thanks again.
No problem, I love to try to help the community. Glad you got it sorted. Cheers!
Anyone has G900PVPS3CQD1 firmware?
bng87 said:
Anyone has G900PVPS3CQD1 firmware?
Click to expand...
Click to collapse
I'm currently trying to download from Sammobile as we speak :good:
Edit: after 9 failed attempts at downloading from Sammobile, I'm taking a break. If anyone manages to get a hold of a copy feel free to let me know and I will add it to the op.
Update:
I have not have the Sprint G900PVPS3CQD1_G900PSPT3CQD1_SPR.zip update now available.
Same Place as Usual
The~Skater~187 said:
I decided to download and collect most of the newer firmware images for our SM-G900P and share them in one convenient place for everyone to find them.
These are all factory images I have personally downloaded from Sammobile for updating my device..
As usual I am in no way responsible for damage done to your device. These images are completely untouched and unmodified.
So far I have collected:
*G900PVPS3CQC1_G900PSPT3CQC1_SPR
*G900PVPS3CPK1_G900PSPT3CPK1_SPR
*G900PVPS3CQD1_G900PSPT3CQD1_SPR
*G900PVPS3CQA2_G900PSPT3CQA2_SPR
*G900PVPU3BOK4_G900PSPT3BOK4_SPR
*G900PVPU3CPH3_G900PSPT3CPH3_SPR
*G900PVPU3CPL2_G900PSPT3CPL2_SPR
.
Click to expand...
Click to collapse
Any way to add dates to the firmware or are they already ordered from newest to oldest?
Thanks for this thread!
xmicroman said:
Any way to add dates to the firmware or are they already ordered from newest to oldest?
Thanks for this thread!
Click to expand...
Click to collapse
I will adjust the op
CQD1 is the latest
Related
It seems like I do this for every device I own so I might as well do it here on the S5 as well.
Here you can find every modem currently in existence for the Sprint Galaxy S5 (SM-G900P). We will add more as new builds are released.
Modems control every aspect of communication on your phone. Having the correct modem can influence your data speeds, your phone call quality and more. Different people report better results with one modem or another but there seems to be no rhyme or reason. I recommend flashing them until you find one that works well for you.
Currently the modems available are only available in One-Click or TAR formats. But I have it on good authority that our best and brightest devs are working on a way to flash them in a ZIP...
Each of these modem flashers include both the modem.bin and the NON-HLOS.bin. This ensures that you're running the same build version for both 3G, LTE/4G and Wi-Fi connections and helps prevent connection issues.
As a general reminder, I cannot and will not be held responsible for any issues that arise from improper flashing of these modems.
The modems are listed in the order of most recent to the oldest released.
Please do not post direct links to the modems on the site. All modems are available through the links on this post. Thank you!
KitKat Modems: http://www.rwilco12.com/forum/showthread.php?tid=824
Available Modems (TAR Format): NE5 / ND2 / NCB
Available Modems (One-Click Format): NE5 / ND2 / NCB
Enjoy!
Reserved.
Sweet, will be trying to make them zip flashable. great thread.
Ty sir.
DL links don't work.
HD-man said:
DL links don't work.
Click to expand...
Click to collapse
Yes they do, you just have to follow the link in the OP to rwilco12's website.
Ramer84015 said:
Yes they do, you just have to follow the link in the OP to rwilco12's website.
Click to expand...
Click to collapse
I did, unless I have to be signed in?
Awesome rwilco12 thanks for doing this. :good::good:
It was a huge help with my Sprint Samsung Galaxy S2 Epic 4G touch (man I hated that name...).
HD-man said:
I did, unless I have to be signed in?
Click to expand...
Click to collapse
They should take you to the spot where you select the specific one you want and click on it. Presto download!
Arkanthos2015 said:
Awesome rwilco12 thanks for doing this. :good::good:
It was a huge help with my Sprint Samsung Galaxy S2 Epic 4G touch (man I hated that name...).
Click to expand...
Click to collapse
Only name worse was the Palm Pixi. One of my favorite phones but boy it took forever to live that down with the guys. Lol
rwilco12 said:
They should take you to the spot where you select the specific one you want and click on it. Presto download!
Click to expand...
Click to collapse
Awesome thanks man.
any idea this will work on marshmallow?
tgkobaljr said:
any idea this will work on marshmallow?
Click to expand...
Click to collapse
No they wont.
tdunham said:
No they wont.
Click to expand...
Click to collapse
Do you know where i can obtain one?
"OK4" was last modem now it is "PCA" or "PG1"? OP my not have updated modems in repo?
tdunham said:
No they wont.
Click to expand...
Click to collapse
Is there a tar file for firmware PG1?
Sent from my SM-G900P using XDA-Developers mobile app
Slimegod said:
Is there a tar file for firmware PG1?
Click to expand...
Click to collapse
I do not have any of the latest firmware downloaded to create separate flashable modems.
Sorry.
tdunham said:
I do not have any of the latest firmware downloaded to create separate flashable modems.
Sorry.
Click to expand...
Click to collapse
Do you have any ideas where i can probably find it? Sammobile doesn't have it either.
Sent from my SM-G900P using XDA-Developers mobile app
Slimegod said:
Do you have any ideas where i can probably find it? Sammobile doesn't have it either.
Click to expand...
Click to collapse
It looks like Sammobile is having problems right now so I cant look but it could have been an incremental security patch that will never see a full Tar release.
Meaning the only way to get it is to flash prior full tar and take the OTA update.
This doesn't mean there never will be one available. Sammobile is notoriously slow on posting firmware.
tdunham said:
It looks like Sammobile is having problems right now so I cant look but it could have been an incremental security patch that will never see a full Tar release.
Meaning the only way to get it is to flash prior full tar and take the OTA update.
This doesn't mean there never will be one available. Sammobile is notoriously slow on posting firmware.
Click to expand...
Click to collapse
I did a OTA to PG1 straight from 4.4 so like if i want to return to stuck there is no possible way then right?
Edit: Was wondering, if I had to without bricking my phone, can a downgrade be possible from PG1 to PE2?
Sent from my SM-G900P using XDA-Developers mobile app
Disclaimer:
This package is for the Sprint Galaxy S5 (SM-G900P) only. Your device, your responsibility - not ours.
Do not flash this if you do not know what you are doing.
Credits:
Anonymous Sources (for providing and continuing to share relevant info)
@Chainfire (CFAR Prep & Testing Coordination - See post #2)
Rwilco12 (Hosting)
Samsung/Sprint (you didn't come after anyone for the leak. Thank you - and also thanks for testing this one a lot.)
You've been waiting - and now be rewarded with official Lollipop.
Those of you who have been on the NKD leak this won't look too much different.
Link to build:
Full Restore Tar (in self extracting EXE) - Rwilco12
MD5 checksum: 427198343d9b5acca995905f2dff2184
Steps to Flash:
1) Place phone in download mode.
2) Open Odin (I tested using 3.04 and 3.07)
3) Extract tar.md5 file and select in PDA slot.
4) Start Flash and wait for process to complete. (You will see 2 reboots in the process)
Additional notes and links provided in Post #2.
Notes
Rooting Information
Thanks to Chainfire's assistance a CF Auto Root package is available for this build.
You can download it by clicking here.
During testing SuperSU did not pick up that it stuck properly initially.
After KNOX started throwing the warnings it finally settled in. So you may need to play with it to get it to work.
This will likely be the case until an official Lollipop build is released so again, you're warned in advance.
Also, please note that unless it has been corrected the 5.0 compatible version of CFAR is not compatible with earlier versions.
You'll need to find an older version if you want to root on KitKat this way.
Reserved
In case anything else needs noted.
Awesome brother. You work fast!
much love. ty for this
-Deleted- I re-read the post and answered my own question.
Danster840 said:
-Deleted- I re-read the post and answered my own question.
Click to expand...
Click to collapse
Yes... yes you did. And much obliged for that.
Just wanted to say thanks. I've already flashed because I pissed myself when I saw this posted and it was flawless. I was actually looking for this today because for some reason I couldn't download it from the Sammy site. Anyway.....Thank you for posting this so quickly. I really appreciate that.
Can I post a mirror?
Thank you for this!! :good:
Thanks! I know what I'm doing tonight.
Nice thanks.
Any chance of just the OA6 modem for those of us on CM12?
Sweet!
Sent from my SM-G900P using XDA Premium 4 mobile app
Thank you very much for doing this... Everthing worked perfectly through ODIN :good::good:
Thank you for this update.
Thank you!! I had tripped the knox counter and was unable to update. This is working great so far. Resetting everything up now
Downloading now, thank you very much sir!
Oa6 modem
biship said:
Nice thanks.
Any chance of just the OA6 modem for those of us on CM12?
Click to expand...
Click to collapse
@biship
HERE IS THE OA6 MODEM .. use ODIN and flash in PHONE slot... benefit
rlmiller said:
@biship
HERE IS THE OA6 MODEM .. use ODIN and flash in PHONE slot... benefit
Click to expand...
Click to collapse
does it work With nkd base?
eloko said:
does it work With nkd base?
Click to expand...
Click to collapse
yes
I (somehow) managed to achieve root privaliges on my Galaxy Core Prime Cricket variant (SM-G360AZ) this morning. Since I've had this device, I've noticed there is little to no information available on, well...anywhere. Is anyone aware of any working custom recoveries that are available for this device? I am a dedicated flashaholic and I would like to know if there are...before this phone ends up in GCP heaven...lol thanks...
--Jack
How did you achieve root?
JUSTINMARMER said:
How did you achieve root?
Click to expand...
Click to collapse
Kingroot will do it.
hey got some helpful files for everyone.
i am uploading stock SM-G360AZ odin files atm
KillaRose said:
i am uploading stock SM-G360AZ odin files atm
Click to expand...
Click to collapse
Did you ever upload those files? I could really use them!!
Problem with cricket core prime
turns out that all of the twrp releases i tried didnt work, didnt have a backup of original recovery, so i flashed this one from g360p with same firmware baseband and now recovery works again.. I hope this helps someone.
yea i did but due to permissions
noobsaibot34 said:
turns out that all of the twrp releases i tried didnt work, didnt have a backup of original recovery, so i flashed this one from g360p with same firmware baseband and now recovery works again.. I hope this helps someone.
Click to expand...
Click to collapse
your all welcome there are odin stock files for SM-G360AZ for Cricket wireless Samsung Galaxy Core Prime.. enjoy all your welcome.
https://drive.google.com/drive/folders/0B0rceJbAma8BZmlYV01qVlAzeWs?usp=sharing
I have a core prime cricket but can't flash it cause it says rev fail old bin
can you explain a little more of your problem please? i.e like what firmware or files you are using and how you attempted to install them just like a little check list of start to finish and also i uploaded the odin files into my gdrive if anyone needs them uploaded somewhere else just let me know best way to get ahold of me is by pm
I got an OTA notification this morning to install G900TUVS1FOL1. Went ahead an applied the OTA update and everything seems to be running much better than before. A lot of the lag that I was seeing before is now gone. No word on battery life as I only had the update installed for about 12 hours. Figured I would let people know that there is a new update available. Haven't seen much information posted about it.
I am unrooted BTW, so I can't really answer any questions about that.
Link to update: http://www.sammobile.com/firmwares/download/63941/G900TUVS1FOL1_G900TTMB1FOL1_TMB/
AFH download link from @thisisapoorusernamechoice https://www.androidfilehost.com/?fid=24389512218018506
Roman217 said:
I got an OTA notification this morning to install G900TUVS1FOL1. Went ahead an applied the OTA update and everything seems to be running much better than before. A lot of the lag that I was seeing before is now gone. No word on battery life as I only had the update installed for about 12 hours. Figured I would let people know that there is a new update available. Haven't seen much information posted about it.
I am unrooted BTW, so I can't really answer any questions about that.
Link to update: http://www.sammobile.com/firmwares/download/63941/G900TUVS1FOL1_G900TTMB1FOL1_TMB/
Click to expand...
Click to collapse
Can you give a screenshot of your about phone.
Screenshots attached.
Checked for update and it's pulling it down, about 330mb in size.
Sent from my SM-G900T using XDA Free mobile app
I'm receiving this OTA as well, downloading the odin flashable firmware then rooting, wish me luck
Any feedback guys?
devoidx said:
Any feedback guys?
Click to expand...
Click to collapse
I've had no lag or any of the problems that I normally run into on stock roms.
I'm rooted on stock 4.4.2. What's the best way to take this one (do I need to get up to a 5.0.x first, etc.), and preserve root?
Sent from my SM-G900T using Tapatalk
Playb3yond said:
View attachment 3607101
View attachment 3607102
I'm receiving this OTA as well, downloading the odin flashable firmware then rooting, wish me luck
Click to expand...
Click to collapse
Were you able to re-root after using Odin?
Apostlemk said:
Were you able to re-root after using Odin?
Click to expand...
Click to collapse
I was, seems to be better than before. Just need to debload my stock rom and I'm set
Sent from my SM-G900T using Tapatalk
Playb3yond said:
I was, seems to be better than before. Just need to debload my stock rom and I'm set
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Could you verify bootloader version? I updated mine but bootloader stays at FOJ4 while everything else is FOL1.
Playb3yond said:
I was, seems to be better than before. Just need to debload my stock rom and I'm set
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
How were you able to root?
of coarse. flash twrp in odin, then download supersu2.66 and flash that. Rooted. It's very simple
how I managed to make the root?
Playb3yond said:
of coarse. flash twrp in odin, then download supersu2.66 and flash that. Rooted. It's very simple
Click to expand...
Click to collapse
hello have a galaxy s5 T-Mobile sm-g900t like that if it were possible postasse how he rootear your most detailed device if the model is the same as mine, have android 5.1.1 g900TUVS1FOL1 from already thank excuse my English'm from Brazil.
Hey gang!
I have the metropcs variant (G900t1) of the Galaxy s5. I downloaded the .tar file. I wiped my phone first (twice for good measure) and rebooted to download mode via TWRP. I *did* uncheck the auto reboot box because I hears odin acts funny around OTA's. After the reboot was done, my phone got stuck on he splash screen for a while. I popped out my battery.
for the record, not a noob but leery about regaining root using cf autoroot.
XDA, check me on this. I want to do this right. =)
I updated via Kies earlier this afternoon. So far it's very snappy.
modem
can someone post a flashable modem of this version?
yeshivabachur said:
can someone post a flashable modem of this version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
zip flashable
lost_ said:
http://forum.xda-developers.com/tmo...t/how-to-update-to-g900tof6-5-1-1-pc-t3141404
Click to expand...
Click to collapse
sorry i meant a zip flashable through TWRP.
which brings me to this question.... better to do it through odin or through TWRP?
yeshivabachur said:
sorry i meant a zip flashable through TWRP.
which brings me to this question.... better to do it through odin or through TWRP?
Click to expand...
Click to collapse
look at the 1st post, its there
i flashed it with odin, works fine.
G900TUVS1GPG2
Rooted Deodexed BusyBox Init.d
Hi all, just wanted to share a little project i've been working on. Its the latest release for the T-mobile S5 G900T, rooted busybox deodexed and init.d support. I'm am totally new to the process of kitchens and making roms. This is my first release on this project and will release debloated and other combinations as i have time. Please enjoy and report any issues. I will try my best to help in any way.
Now for the rom and instructions.
Typical disclaimer as always, I am not responsible for any damaged caused by flashing custom software period. If you have gotten this far then you completely understand the risks involved with "flashing" custom software (ROMs). Flashing this ROM will void your warranty and trip knox.
Again this is for the T-mobile S5 G900T. Stock for the most part. Its rooted busybox deodexed and init.d support. I have replaced the stock kernel with The Imperius Curse Kernel 6-20 by @ShinySide. Edited homescreen pages. There is only one Homescreen page by default. If you need screens and widgets just add them. Removed NFC icon and removed sfinder and quick connect from pulldown menu. International Boot animation and sound. All apps in system/app & system/priv-app updated as of 7/23/2016.
You need custom recovery installed to proceed. I use TWRP, have not tested on CWM.
You need to be on a 6.0.1 bootloader! I tested on the PE1 bootloader and had no issues but i recommend a full update to PG2.
EDIT Odin flashable PG2 bootloader and Modem tar download link below
If you do not have a custom recovery installed then please go herehttp://forum.xda-developers.com/tmobile-galaxy-s5/general/root-how-to-root-sm-g900t-firmware-t3358190 then continue below.
Download ROM and move to root storage of phone. ExtSDcard or internal sd
Reboot to TWRP and tap wipe then advanced wipe and check boxes 'Dalvik/ ART cache' 'System' 'Data' and 'Cache' then swipe to wipe. Do this 3 times just to be safe. If you moved the rom to phone storage DO NOT WIPE Internal storage as you will delete the rom you just downloaded.
Go back to the main menu in TWRP and tap install, choose rom and swipe to install.
After install is complete reboot and wait around 15 minutes for boot to complete.
Download MEGA
https://mega.nz/#!H1YVyKLQ!31dCtlLQWE0al04p6-ypmNnUgCvtuGXBpxJNvIHq5rw
Download AFH
https://www.androidfilehost.com/?fid=24572369242689365
PG2 Bootloader and Modem by @ShinySide
https://www.androidfilehost.com/?fid=24665509702141030
Thanks to the following for their work. With their progress we are able to bring custom roms with a lot less effort and error than in previous times. Their work is greatly appreciated!
@ShinySide for his solid Kernel The Imperius Curse 6-20 and Bootloader/Modem tar
@Chainfire for Supersu
@osm0sis for his busybox installer
@lord-ralf-adolf for his deodexer
and
@superr for his kitchen
RESERVED
Can anyone post systemui.apk and legacyincallui.apk from G900TUVS1GPG2 thx
joiN85 said:
Can anyone post systemui.apk and legacyincallui.apk from G900TUVS1GPG2 thx
Click to expand...
Click to collapse
Here ya go if you haven't already gotten them.
I have strange problem with this ROM, hope anyone can help. After installation, I can't use adb any more. "adb devices" shows the devices is unauthorized, and under "Developer options", there is no button for "Revoke USB debugging authorizations". There is also no USB key fingerprint confirmation window.
Is it just me or the ROM?
CrendKing said:
I have strange problem with this ROM, hope anyone can help. After installation, I can't use adb any more. "adb devices" shows the devices is unauthorized, and under "Developer options", there is no button for "Revoke USB debugging authorizations". There is also no USB key fingerprint confirmation window.
Is it just me or the ROM?
Click to expand...
Click to collapse
It's actually a Kernel issue and not sure ito has been updated. Flashing another kernel will fix your issue. I will update the op and possibly link another kernel.
Can anyone post the PG2 modem and new bootloader
Delete
Sent from my SM-N910T using XDA-Developers mobile app
macasus76 said:
It's actually a Kernel issue and not sure ito has been updated. Flashing another kernel will fix your issue. I will update the op and possibly link another kernel.
Click to expand...
Click to collapse
I can confirm by flashing back the stock kernel the problem is fixed. Still look forward to the new ROM. Thanks!
CrendKing said:
I can confirm by flashing back the stock kernel the problem is fixed. Still look forward to the new ROM. Thanks!
Click to expand...
Click to collapse
Been a busy 2 weeks bit will get the debloated version up this week sometime for sure.
CrendKing said:
I can confirm by flashing back the stock kernel the problem is fixed. Still look forward to the new ROM. Thanks!
Click to expand...
Click to collapse
I broke it lmao
Be updated soon though. Have the source to G2, and for some reason Samsung supplied their own toolchain in the source (which I've never seen) so been screwing around with it.
ShinySide said:
I broke it lmao
Be updated soon though. Have the source to G2, and for some reason Samsung supplied their own toolchain in the source (which I've never seen) so been screwing around with it.
Click to expand...
Click to collapse
Awesome news, about to finish up this debloated version of PG2, please keep me posted and I'll test and include in the rom.:good:
PG2 Modem / Bootloader Update
jaleal said:
Can anyone post the PG2 modem and new bootloader
Click to expand...
Click to collapse
+1
Been looking all over for it on the Googles. I'm on CM 13 / GPE1 and don't want to flash over my current ROM.
ajinxa said:
+1
Been looking all over for it on the Googles. I'm on CM 13 / GPE1 and don't want to flash over my current ROM.
Click to expand...
Click to collapse
I've been looking into how to make a bootloader/modem flashable thru Odin but can't find any reliable up to date guides. If anyone knows where I might look to start I'm very sure I could make it, just need guidelines on how to begin.
macasus76 said:
I've been looking into how to make a bootloader/modem flashable thru Odin but can't find any reliable up to date guides. If anyone knows where I might look to start I'm very sure I could make it, just need guidelines on how to begin.
Click to expand...
Click to collapse
Gimme a minute. I'll make one. It's simple easy on Linux
ShinySide said:
Gimme a minute. I'll make one. It's simple easy on Linux
Click to expand...
Click to collapse
Yeah I kept getting errors in terminal and couldn't quite get it. Thanks a bunch!
macasus76 said:
Yeah I kept getting errors in terminal and couldn't quite get it. Thanks a bunch!
Click to expand...
Click to collapse
Everything except system.img, cache.img, boot.img and recovery.img. So full upgrade beside those 4 items.
https://www.androidfilehost.com/?fid=24665509702141030
ShinySide said:
Everything except system.img, cache.img, boot.img and recovery.img. So full upgrade beside those 4 items.
https://www.androidfilehost.com/?fid=24665509702141030
Click to expand...
Click to collapse
That made it a breeze to install.
Thanks!
debloated
macasus76 said:
Awesome news, about to finish up this debloated version of PG2, please keep me posted and I'll test and include in the rom.:good:
Click to expand...
Click to collapse
How's the debloated version coming along? I can't wait to try it out. Thanks for your hard work!
Flashed this rom. Everthing is running great, thank you. I was wondering if anybody has the stock kernel in a zip format?