G900TUVS1GPG2
Rooted Deodexed BusyBox Init.d
Hi all, just wanted to share a little project i've been working on. Its the latest release for the T-mobile S5 G900T, rooted busybox deodexed and init.d support. I'm am totally new to the process of kitchens and making roms. This is my first release on this project and will release debloated and other combinations as i have time. Please enjoy and report any issues. I will try my best to help in any way.
Now for the rom and instructions.
Typical disclaimer as always, I am not responsible for any damaged caused by flashing custom software period. If you have gotten this far then you completely understand the risks involved with "flashing" custom software (ROMs). Flashing this ROM will void your warranty and trip knox.
Again this is for the T-mobile S5 G900T. Stock for the most part. Its rooted busybox deodexed and init.d support. I have replaced the stock kernel with The Imperius Curse Kernel 6-20 by @ShinySide. Edited homescreen pages. There is only one Homescreen page by default. If you need screens and widgets just add them. Removed NFC icon and removed sfinder and quick connect from pulldown menu. International Boot animation and sound. All apps in system/app & system/priv-app updated as of 7/23/2016.
You need custom recovery installed to proceed. I use TWRP, have not tested on CWM.
You need to be on a 6.0.1 bootloader! I tested on the PE1 bootloader and had no issues but i recommend a full update to PG2.
EDIT Odin flashable PG2 bootloader and Modem tar download link below
If you do not have a custom recovery installed then please go herehttp://forum.xda-developers.com/tmobile-galaxy-s5/general/root-how-to-root-sm-g900t-firmware-t3358190 then continue below.
Download ROM and move to root storage of phone. ExtSDcard or internal sd
Reboot to TWRP and tap wipe then advanced wipe and check boxes 'Dalvik/ ART cache' 'System' 'Data' and 'Cache' then swipe to wipe. Do this 3 times just to be safe. If you moved the rom to phone storage DO NOT WIPE Internal storage as you will delete the rom you just downloaded.
Go back to the main menu in TWRP and tap install, choose rom and swipe to install.
After install is complete reboot and wait around 15 minutes for boot to complete.
Download MEGA
https://mega.nz/#!H1YVyKLQ!31dCtlLQWE0al04p6-ypmNnUgCvtuGXBpxJNvIHq5rw
Download AFH
https://www.androidfilehost.com/?fid=24572369242689365
PG2 Bootloader and Modem by @ShinySide
https://www.androidfilehost.com/?fid=24665509702141030
Thanks to the following for their work. With their progress we are able to bring custom roms with a lot less effort and error than in previous times. Their work is greatly appreciated!
@ShinySide for his solid Kernel The Imperius Curse 6-20 and Bootloader/Modem tar
@Chainfire for Supersu
@osm0sis for his busybox installer
@lord-ralf-adolf for his deodexer
and
@superr for his kitchen
RESERVED
Can anyone post systemui.apk and legacyincallui.apk from G900TUVS1GPG2 thx
joiN85 said:
Can anyone post systemui.apk and legacyincallui.apk from G900TUVS1GPG2 thx
Click to expand...
Click to collapse
Here ya go if you haven't already gotten them.
I have strange problem with this ROM, hope anyone can help. After installation, I can't use adb any more. "adb devices" shows the devices is unauthorized, and under "Developer options", there is no button for "Revoke USB debugging authorizations". There is also no USB key fingerprint confirmation window.
Is it just me or the ROM?
CrendKing said:
I have strange problem with this ROM, hope anyone can help. After installation, I can't use adb any more. "adb devices" shows the devices is unauthorized, and under "Developer options", there is no button for "Revoke USB debugging authorizations". There is also no USB key fingerprint confirmation window.
Is it just me or the ROM?
Click to expand...
Click to collapse
It's actually a Kernel issue and not sure ito has been updated. Flashing another kernel will fix your issue. I will update the op and possibly link another kernel.
Can anyone post the PG2 modem and new bootloader
Delete
Sent from my SM-N910T using XDA-Developers mobile app
macasus76 said:
It's actually a Kernel issue and not sure ito has been updated. Flashing another kernel will fix your issue. I will update the op and possibly link another kernel.
Click to expand...
Click to collapse
I can confirm by flashing back the stock kernel the problem is fixed. Still look forward to the new ROM. Thanks!
CrendKing said:
I can confirm by flashing back the stock kernel the problem is fixed. Still look forward to the new ROM. Thanks!
Click to expand...
Click to collapse
Been a busy 2 weeks bit will get the debloated version up this week sometime for sure.
CrendKing said:
I can confirm by flashing back the stock kernel the problem is fixed. Still look forward to the new ROM. Thanks!
Click to expand...
Click to collapse
I broke it lmao
Be updated soon though. Have the source to G2, and for some reason Samsung supplied their own toolchain in the source (which I've never seen) so been screwing around with it.
ShinySide said:
I broke it lmao
Be updated soon though. Have the source to G2, and for some reason Samsung supplied their own toolchain in the source (which I've never seen) so been screwing around with it.
Click to expand...
Click to collapse
Awesome news, about to finish up this debloated version of PG2, please keep me posted and I'll test and include in the rom.:good:
PG2 Modem / Bootloader Update
jaleal said:
Can anyone post the PG2 modem and new bootloader
Click to expand...
Click to collapse
+1
Been looking all over for it on the Googles. I'm on CM 13 / GPE1 and don't want to flash over my current ROM.
ajinxa said:
+1
Been looking all over for it on the Googles. I'm on CM 13 / GPE1 and don't want to flash over my current ROM.
Click to expand...
Click to collapse
I've been looking into how to make a bootloader/modem flashable thru Odin but can't find any reliable up to date guides. If anyone knows where I might look to start I'm very sure I could make it, just need guidelines on how to begin.
macasus76 said:
I've been looking into how to make a bootloader/modem flashable thru Odin but can't find any reliable up to date guides. If anyone knows where I might look to start I'm very sure I could make it, just need guidelines on how to begin.
Click to expand...
Click to collapse
Gimme a minute. I'll make one. It's simple easy on Linux
ShinySide said:
Gimme a minute. I'll make one. It's simple easy on Linux
Click to expand...
Click to collapse
Yeah I kept getting errors in terminal and couldn't quite get it. Thanks a bunch!
macasus76 said:
Yeah I kept getting errors in terminal and couldn't quite get it. Thanks a bunch!
Click to expand...
Click to collapse
Everything except system.img, cache.img, boot.img and recovery.img. So full upgrade beside those 4 items.
https://www.androidfilehost.com/?fid=24665509702141030
ShinySide said:
Everything except system.img, cache.img, boot.img and recovery.img. So full upgrade beside those 4 items.
https://www.androidfilehost.com/?fid=24665509702141030
Click to expand...
Click to collapse
That made it a breeze to install.
Thanks!
debloated
macasus76 said:
Awesome news, about to finish up this debloated version of PG2, please keep me posted and I'll test and include in the rom.:good:
Click to expand...
Click to collapse
How's the debloated version coming along? I can't wait to try it out. Thanks for your hard work!
Flashed this rom. Everthing is running great, thank you. I was wondering if anybody has the stock kernel in a zip format?
Related
Okay... this continues the tradition of my previous, the Knox-disabled, rooted, deodexed Sprint NJL stock ROM.
This thread will either 1) give you a deodexed NK1 if you're already on NK1, or 2) upgrade you from NJL to NK1 (baseband and boot) and provide you with a deodexed NK1 ROM.
Terms, Conditions, and Background
Please consider the following carefully before proceeding with anything in this post:
--I still have no idea what I'm doing
--I have never done any dev work other than the NJL ROM, and I really don't consider that "dev"
--I only did this because no one else has done it
--Installing/flashing anything herein may brick or otherwise destroy/render your device useless
--By proceeding, you hold me completely harmless and it's all on you!
If you're currently on NJL, start on step 1. If you're already on NK1, go to step 2
Preparation: Do at least one full nandroid (including everything but cache) onto your microSD. TWRP or CWM is okay.
Step 1:
1.1 Download the factory NK1 ROM (link below) and Odin the package. This is the full factory NK1, which means it contains the factory recovery, modem, system, bootloader etc. It will essentially reset your device to factory (without wiping the /data partition, so all your installed app and data will still be there). You will lose root. When you complete this step, your modem and bootloader will also be on NK1.
This is a zipped file. You need to unzip to get the tar file for Odin. The extension will be .tar.md5.
Download Link
1.2 Follow these instructions here to regain root
http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
Step 2:
2.1 Download and flash the deodexed NK1/Knox disabled zip, be sure to verify the MD5
Download Link
MD5 Link
2.2 Clear dalvik and cache
2.3 IF you came from Step 1, I recommend the following:
--Wipe the data partition
--Restore the data partition from the backup you made during the preparation phase
Why? In case things got tweaked somewhere along the way. This way, you have a fresh boot using the known good data backup with your new deodexed NK1 /system
-------
This ROM DOES NOT wipe the data partition.
This ROM comes with the international Note Edge boot graphics (credit to TEKHD)
This ROM already has the SD card write fix flashed to it (credit to TEKHD)
I made no other modifications
Credit to jovy23 -- I used his META-INF from Note 4.
-------
If you're using Xposed, S-Health and Private Mode will not work. This is not a problem specific to this ROM, but a compatibility issue between Samsung's private storage and Xposed.
Workaround:
Either use Wanam to disable Secure Storage or XSecureStorage (http://repo.xposed.info/module/ma.wanam.xshealth) and S-Health should work.....
-------
Afterthoughts
--Please hit/say "Thanks" if you deem appropriate
--Please be nice. I don't know what I'm doing. I'm only sharing in case someone else want the same I do.
--If you can contribute and help improve this, I'm all ears.
--Please do not mirror, repost, or otherwise share without my permission.
--In case you're wondering, I wanted deodexed because it gives way to theming/customization. I also thought I read that Xposed requires deodexed in some cases.
--Did I miss anything?
Will download and give this a run once I get my recovery performing properly.
Just wanted to make sure before performing: This will trip Knox. Sorry for being a noob.
IMBAE75 said:
Just wanted to make sure before performing: This will trip Knox. Sorry for being a noob.
Click to expand...
Click to collapse
Yes it will....
I'll get on this and let you know! Downloading now.
I'm on stock NK1. Just added root a while ago. Flashing this be any different? And would I have to wipe data or just cache and dalvik cache?
powerstroke said:
I'm on stock NK1. Just added root a while ago. Flashing this be any different? And would I have to wipe data or just cache and dalvik cache?
Click to expand...
Click to collapse
Just flash as any zip, and wipe cache and dalvik only (the flash will do that also). No need to wipe data. I've dirty flashed many times with no issues. Cheers.
Just flashed. Running great so far. Thanks again. Can't wait for a custom ROM for the Sprint Edge. Look's like T-Mobile has one already :-/
how about n915k
hey snowman will any of your roms work on n915K variant, if not would you please compile one for us the unfortunate K users because no one else seems to care?
cheers
onours said:
hey snowman will any of your roms work on n915K variant, if not would you please compile one for us the unfortunate K users because no one else seems to care?
cheers
Click to expand...
Click to collapse
I do not believe that the "T" and "P" variant ROMs will work with the "K". However, if there is enough interest, I can compile a K version. I have since worked out the zipalign process, so anything I release after will be zipaligned also.....
K owners matter (or do we)
snovvman said:
I do not believe that the "T" and "P" variant ROMs will work with the "K". However, if there is enough interest, I can compile a K version. I have since worked out the zipalign process, so anything I release after will be zipaligned also.....
Click to expand...
Click to collapse
mate, I know that S/K are both Korean variants however "S" is no good for "K" users so we would appreciate if any one of you genius devs also take in to account the K users when you seed your valuable roms.
As a compliment you:ll get a huge thanks from us considering the potential exponential growth in K owners (eventually I guess)
cheers.
ps. zipalinging is cool and deodexed is cooler .
onours said:
mate, I know that S/K are both Korean variants however "S" is no good for "K" users so we would appreciate if any one of you genius devs also take in to account the K users when you seed your valuable roms.
As a compliment you:ll get a huge thanks from us considering the potential exponential growth in K owners (eventually I guess)
cheers.
ps. zipalinging is cool and deodexed is cooler .
Click to expand...
Click to collapse
I downloaded the NK5 "K" ROM, but I'm having some issues extracting the system.img from the tar. I've tried ext2expore, ext4unpacker, diskinternals, sgs2toext4, but no joy. still trying....
snovvman said:
I downloaded the NK5 "K" ROM, but I'm having some issues extracting the system.img from the tar. I've tried ext2expore, ext4unpacker, diskinternals, sgs2toext4, but no joy. still trying....
Click to expand...
Click to collapse
Send me the link I'll help you pull it and recompile.
scoobysnack said:
Send me the link I'll help you pull it and recompile.
Click to expand...
Click to collapse
Will do. I'll upload the tar and send you the link. Thank you sir! BTW, I'd really appreciate some info on how it is done. Cheers.
scoobysnack said:
Send me the link I'll help you pull it and recompile.
Click to expand...
Click to collapse
snovvman said:
Will do. I'll upload the tar and send you the link. Thank you sir! BTW, I'd really appreciate some info on how it is done. Cheers.
Click to expand...
Click to collapse
Here you go sir:
https://www.androidfilehost.com/?fid=95832962473398706
This is the N915KKTU1ANK5 for the 915K.
Cheers! :good:
EDIT: THE ABOVE LINK IS *NOT* FOR SPRINT. DO NOT FLASH ON YOUR SPRINT DEVICE. I WILL BRANCH OUT THIS TO ITS OWN THREAD ONCE I LEARN HOW TO EXTRACT THE ROM.
@snovvman are you on hangouts? I'm about to put the ROM back together for you.
scoobysnack said:
@snovvman are you on hangouts? I'm about to put the ROM back together for you.
Click to expand...
Click to collapse
Thanks! I'm not usually, but can certainly be. I'll send you a PM.
Ok I have the Sprint ROM ready for testing. It's zipaligned, deodexed, Knox removed and I think it's rooted (could not test root)
scoobysnack said:
Ok I have the Sprint ROM ready for testing. It's zipaligned, deodexed, Knox removed and I think it's rooted (could not test root)
Click to expand...
Click to collapse
oh a custom rooted deodexed zipaligned 'K' rom is finally about to come out (?)
freaking excited... cheers to you guys
btw 12 years a go my first car was a ford 'ka', I loved the little devil. anyways...
Just pick up my edge will be testing soon
Since I haven't seen any other threads on this topic, I figured I'd go ahead and get the ball rolling for anybody interesting in building a custom ROM. As the title suggests, this is a completely deodexed system image for the latest firmware update we recently received.
Just to clarify, this is a (mostly) stock base, and is intended to serve more as a foundation/starting point for anyone looking to build their own ROM.
I took the liberty to update all applications to their newest/current version and preinstalled busybox, which should save everyone a considerable amount of time and data. I also removed about a dozen or so apps that don't serve any beneficial purpose to the phone, but I will still include them in the download link for anybody that wants them for whatever reason.
You will obviously need to be rooted in order to flash this through recovery, so unfortunately if you are one of the unlucky souls that lost it with the update, you'll have to wait for a custom tot to surface before you can flash this.
I've been running this image for the last couple weeks or so and haven't encountered a single issue, but you should still make a backup of your current setup prior to flashing just to play it safe.
Nothing special needs to be done when flashing it, just the standard factory reset along with SuperSU and you should be good to go. If you have any questions, feel free to ask, and hopefully you like it!
Download Link: https://drive.google.com/open?id=0B1zv5TG-Zo2kQlh2ejBDc05hWEU
hope this gets the ball rollin on ROMs. thanks so much! I have been having a few issues w/ the fluence patch..but not that many. but i know a custom made app for our phone would be way better. to get rid of all t-mo bloat.
pychobj2001 said:
hope this gets the ball rollin on ROMs. thanks so much! I have been having a few issues w/ the fluence patch..but not that many. but i know a custom made app for our phone would be way better. to get rid of all t-mo bloat.
Click to expand...
Click to collapse
I'm pretty sure it isn't flashable (correct me if I'm wrong) once it is flashable, I'll probably throw something together (TeamSPR ROM)
1619415 said:
I'm pretty sure it isn't flashable (correct me if I'm wrong) once it is flashable, I'll probably throw something together (TeamSPR ROM)
Click to expand...
Click to collapse
Just as the OP states, this absolutely can be flashed through recovery.
Kosovo0275 said:
Just as the OP states, this absolutely can be flashed through recovery.
Click to expand...
Click to collapse
I guess I'll start working later, lol
If you want send me a PM and we can work on it together
1619415 said:
I'm pretty sure it isn't flashable (correct me if I'm wrong) once it is flashable, I'll probably throw something together (TeamSPR ROM)
Click to expand...
Click to collapse
I may be wrong but this one sounds like an image. Am I correct ? There are stock folder based roms available that can be used as a base.
wolfu11 said:
I may be wrong but this one sounds like an image. Am I correct ? There are stock folder based roms available that can be used as a base.
Click to expand...
Click to collapse
Where!?!
Does this Rom offers the new radios and other new stuff from 10D and would I be able to revert back to 10a without any issue like on the other methods?
Rick1221 said:
Does this Rom offers the new radios and other new stuff from 10D and would I be able to revert back to 10a without any issue like on the other methods?
Click to expand...
Click to collapse
I'm pretty sure as long as you don't install the new bootloader you'll be good
1619415 said:
Where!?!
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/lg-g5/development/fluence-hd-rom-t3412535
theres one for the H850 and one for the H830 Click on the download link and you will see it.
wolfu11 said:
I may be wrong but this one sounds like an image. Am I correct ? There are stock folder based roms available that can be used as a base.
Click to expand...
Click to collapse
Yes, for simplicitys sake I chose to use an image in the zip instead. Not knowing if anybody would even be interested in this, it seemed like the logical route to take. Though you might have found other ROMS that are directory based for our phone, I doubt you've found another that's already predeodexed for you. Its also extremely simple to extract this image into the filesystem that you're looking for, but not the other way around.
Kosovo0275 said:
Yes, for simplicitys sake I chose to use an image in the zip instead. Not knowing if anybody would even be interested in this, it seemed like the logical route to take. Though you might have found other ROMS that are directory based for our phone, I doubt you've found another that's already predeodexed for you. Its also extremely simple to extract this image into the filesystem that you're looking for, but not the other way around.
Click to expand...
Click to collapse
If you could make it folder based, I can have a ROM done by like tomorrow, lol
1619415 said:
If you could make it folder based, I can have a ROM done by like tomorrow, lol
Click to expand...
Click to collapse
Sure. Ill make it when I get home in like 20 minutes or so.
Kosovo0275 said:
Sure. Ill make it when I get home in like 20 minutes or so.
Click to expand...
Click to collapse
Sounds good, if you can send it to me in a PM that way I can make sure it boots and I can start working.
Flashed and verified working. Uploading now.
Kosovo0275 said:
Flashed and verified working. Uploading now.
Click to expand...
Click to collapse
Sounds good, If you want, we can still work on a ROM (send me a PM)
I'll download the ROM, debloat it, add SuperSU to the meta-inf and stuff then you can do those tweaks you were telling me about.
1619415 said:
Sounds good, If you want, we can still work on a ROM (send me a PM)
I'll download the ROM, debloat it, add SuperSU to the meta-inf and stuff then you can do those tweaks you were telling me about.
Click to expand...
Click to collapse
Files are finally up and available to download at the link provided in the OP.
Kosovo0275 said:
Files are finally up and available to download at the link provided in the OP.
Click to expand...
Click to collapse
Sounds good, I'll modify and flash in a few and send you what I have that way you can modify it as well.
Flashed this yesterday and have had no issues since. Pretty solid. Thanks!
Got a question. So I'm rooted and on 10a. I can flash this without any problems? Can I use the twrp app or should I boot into recovery? Thanks.
I decided to download and collect most of the newer firmware images for our SM-G900P and share them in one convenient place for everyone to find them.
These are all factory images I have personally downloaded from Sammobile for updating my device..
As usual I am in no way responsible for damage done to your device. These images are completely untouched and unmodified.
So far I have collected:
*G900PVPS3CQC1_G900PSPT3CQC1_SPR
*G900PVPS3CPK1_G900PSPT3CPK1_SPR
*G900PVPS3CQD1_G900PSPT3CQD1_SPR
*G900PVPS3CQA2_G900PSPT3CQA2_SPR
*G900PVPU3BOK4_G900PSPT3BOK4_SPR
*G900PVPU3CPH3_G900PSPT3CPH3_SPR
*G900PVPU3CPL2_G900PSPT3CPL2_SPR
Link to Odin:
http://www.mediafire.com/file/b160o6polbwc2c9/Odin_3.10.0.zip
Link to Firmware:
https://www.mediafire.com/folder/brujjvaro2ogo/Odin_images
Feel free to use these at you own will and at your own risk.
Dev's as usual, help yourselves.
Special Thanks to bytes2bits for providing me with a copy of G900PVPS3CQC1_G900PSPT3CQC1_SPR for you guys
If this was helpful in any way, just hit the thanks button.
Reserved
One More For Me
@Moderators: Please feel free to move this thread of not in proper place
Originals
Thx, needed to reset my S5.
tried using pk1 on my s5 but device wont get passed pulsating Samsung logo
THORMUNZ said:
tried using pk1 on my s5 but device wont get passed pulsating Samsung logo
Click to expand...
Click to collapse
I had the same issue coming from OA6 to PK1. It took a few tries to get the MM bootloader loaded that PK1 requires.
m20120 said:
I had the same issue coming from OA6 to PK1. It took a few tries to get the MM bootloader loaded that PK1 requires.
Click to expand...
Click to collapse
I've used these images myself with out any issues using the provided copy of Odin 3.10 without any issues
May I flash the latest firmware, coming from G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip?
hightech316 said:
May I flash the latest firmware, coming from G900PVPU3BOK4_G900PSPT3BOK4_SPR.zip?
Click to expand...
Click to collapse
I don't see why not.
More than 500 downloads and 3 thanks
TWRP fails
Thanks for the files - but when I used TWRP to flash the 3CQC1 zip, it fails saying "invalid zip file format"
What am I doing wrong?
champagne_problems said:
Thanks for the files - but when I used TWRP to flash the 3CQC1 zip, it fails saying "invalid zip file format"
What am I doing wrong?
Click to expand...
Click to collapse
These files have to be flashed using Odin from a computer. They are not TWRP flashable
The~Skater~187 said:
These files have to be flashed using Odin from a computer. They are not TWRP flashable
Click to expand...
Click to collapse
got it, thanks. I was trying to use TWRP because I only have a mac and couldn't use Odin. I borrowed a PC and the files worked great. Thanks again.
No problem, I love to try to help the community. Glad you got it sorted. Cheers!
Anyone has G900PVPS3CQD1 firmware?
bng87 said:
Anyone has G900PVPS3CQD1 firmware?
Click to expand...
Click to collapse
I'm currently trying to download from Sammobile as we speak :good:
Edit: after 9 failed attempts at downloading from Sammobile, I'm taking a break. If anyone manages to get a hold of a copy feel free to let me know and I will add it to the op.
Update:
I have not have the Sprint G900PVPS3CQD1_G900PSPT3CQD1_SPR.zip update now available.
Same Place as Usual
The~Skater~187 said:
I decided to download and collect most of the newer firmware images for our SM-G900P and share them in one convenient place for everyone to find them.
These are all factory images I have personally downloaded from Sammobile for updating my device..
As usual I am in no way responsible for damage done to your device. These images are completely untouched and unmodified.
So far I have collected:
*G900PVPS3CQC1_G900PSPT3CQC1_SPR
*G900PVPS3CPK1_G900PSPT3CPK1_SPR
*G900PVPS3CQD1_G900PSPT3CQD1_SPR
*G900PVPS3CQA2_G900PSPT3CQA2_SPR
*G900PVPU3BOK4_G900PSPT3BOK4_SPR
*G900PVPU3CPH3_G900PSPT3CPH3_SPR
*G900PVPU3CPL2_G900PSPT3CPL2_SPR
.
Click to expand...
Click to collapse
Any way to add dates to the firmware or are they already ordered from newest to oldest?
Thanks for this thread!
xmicroman said:
Any way to add dates to the firmware or are they already ordered from newest to oldest?
Thanks for this thread!
Click to expand...
Click to collapse
I will adjust the op
CQD1 is the latest
H918 10s stock romWarning: I am not responsible for anything that happens to your phone.
Stock rom based on the latest January security patch
ABR 1 still
Tested on my on phone first
Please read before you flash
Instructions:!Backup any data and make a TWRP recovery!
1. Download the H91810s.zip and put on your SD card
2. Download your preferred root method Magisk or SuperSU and also put on SD card
3. Boot into TWRP and clean or dirty flash H91810s.zip
4. YOU MUST FLASH YOUR PREFERRED ROOT METHOD (If skipped your phone will encrypt and will have to clean flash to see system in TWRP or you may come across other issues)
5.Check if you have flashed root (if you didn't, do it now! or else you could lose twrp)
6. Reboot
Optional:7. Flash the best kernel mk2000
Download:UPDATE: V2 has a modified boot with magisk so people should not lose root.
Stock
H91810sV2
Debloted
Debloated-H91810sV2 (Flash dirty/clean but FLASH ROOT also)
here is Weta Mods for anyone who wants thanks to @i95swervin
https://mega.nz/#!pegzgawZ!JwbE3bgo4...xAS1pSLMvwqNyc
If you enjoy
paypal.me/HassaanM
Credit:
Thanks To:
@McNutnut & @dimm0k for the update scripts & META-INF
@bullghost for the KDZ extractor.
@Tilde88 for the orginal updater-script.
@runningnak3d for some help and for keeping our hopes for root alive.
@askermk2000 for a amazing kernel.
Hit the thanks if you like it!
UPDATE:
Version 2 has been released with a magisk patched boot so people won't lose root as many are forgetting to flash root.
here is Weta Mods for anyone who wants thanks to @i95swervin
https://mega.nz/#!pegzgawZ!JwbE3bgo4...xAS1pSLMvwqNyc
Will this "factory reset" my phone if i "dirty flash" still? I mean will I lose my existing data on the phone and apps installed?' Thanks!
firstblud said:
Will this "factory reset" my phone if i "dirty flash" still? I mean will I lose my existing data on the phone and apps installed?' Thanks!
Click to expand...
Click to collapse
Nope I did a dirty flash and Don't forget to flash root.
Thanks dudeawesome. I'll be moving this to the front of my flashing queue. I just dirty flashed 10r and Magisk from 10j a couple of days ago and was planning on flashing mk2000, KCAL, Zachary's mods, and Magisk iYTBP this evening.
Hello. Thanks for offering this, dudeawsome. Any chance of a debloated version?
custommsp said:
Hello. Thanks for offering this, dudeawsome. Any chance of a debloated version?
Click to expand...
Click to collapse
I'll see what I can whip up!
You're the man!
dudeawsome said:
I'll see what I can whip up!
Click to expand...
Click to collapse
Would there be any issues running an older mk2000 kernel with 10s? I feel like I should wait on either this or mk2000 for now.
Currently on alpha ROM with Xposed. I know this doesn't have weta mods so my question is if dirty flash is OK? Also wanted to request if you have time for a deodexed version?️. Thanks for this easy update ?️?️
Snakecharmed said:
Would there be any issues running an older mk2000 kernel with 10s? I feel like I should wait on either this or mk2000 for now.
Click to expand...
Click to collapse
Nope no issues
custommsp said:
You're the man!
Click to expand...
Click to collapse
About to test debloated version is all goes well then I'll upload
Still_living714 said:
Currently on alpha ROM with Xposed. I know this doesn't have weta mods so my question is if dirty flash is OK? Also wanted to request if you have time for a deodexed version?️. Thanks for this easy update ?️?️
Click to expand...
Click to collapse
About to test debloated version and I say it should work but not 100% sure might need to wipe cache or clean for best bet
dudeawsome said:
About to test debloated version and I say it should work but not 100% sure might need to wipe cache or clean for best bet
Click to expand...
Click to collapse
Will there be anything else besides just being debloated?
Still_living714 said:
Will there be anything else besides just being debloated?
Click to expand...
Click to collapse
as of now nothing but maybe lookout for a new h918 rom coming
dudeawsome said:
as of now nothing but mybe lookout for a new h918 rom coming
Click to expand...
Click to collapse
Gotcha! V20 not dead yet ?️?️
Still_living714 said:
Gotcha! V20 not dead yet ️️
Click to expand...
Click to collapse
It's sad, this phone don't have that much deving going on anymore and I personally love phone (the nifty second screen features not found in any other phone makes me not understand...even LG was so confused they removed it...). Again sad that so many left it...
Well, thanks OP for bringing updates to rooted users we need it bad
theslam08 said:
It's sad, this phone don't have that much deving going on anymore and I personally love phone (the nifty second screen features not found in any other phone makes me not understand...even LG was so confused they removed it...). Again sad that so many left it...
Well, thanks OP for bringing updates to rooted users we need it bad
Click to expand...
Click to collapse
LG's great at following HTC's footsteps from five years ago in throwing a bunch of crap at the wall and seeing what sticks, only to abandon most of their power-user-friendly ideas in favor of becoming a generic also-ran that can't keep up with the Chinese, never mind Samsung. They've done one dumb thing after another starting with the G4 and they managed to get lucky once with the V20.
Even then, they still screwed up with the V20 by not selling it in Europe or marketing aggressively everywhere else when the irons (and the batteries) were hot. How the hell do you botch a product offering when your biggest competitor served lithium-ion flambé for that flagship's generation? LG Mobile is a three-ring circus.
Does this update the firmware as well (modem, bootloader, etc)?
Sent from my LG V20 using XDA Labs
NickWhit1992 said:
Does this update the firmware as well (modem, bootloader, etc)?
Sent from my LG V20 using XDA Labs
Click to expand...
Click to collapse
yes
The long wait has come to an end.
This TWRP was built for P580, I cannot ensure that it works on other variants, but it should work on P585, please test it and tell me.
Your warranty is now void and all that..
This TWRP is only compatible with oreo, due to some mess Sammy did with the bootloader, it works flawlessly on oreo roms, stock and custom!
Proofie
Enough talking, here is the DL link: https://mega.nz/#!MJFlyQ7L!AcEEkbvw7aGMGLnAU8OPEVxiBhfFjThHNTvqx8CMbxQ
Use odin, put this tar file in AP, flash and you're good to go [If you're on stock rom, don't let the device boot to system as it will kill TWRP, overwriting it with stock recovery]
Remember:
You won't have access to data if it is encrypted, you'll have to format data, on the wipe menu, at the side of "Advanced Wipe" there is "Format Data"
If you plan on using the stock rom, remember to disable DM-verity
Btw, if you plan to stay on stock rom, but you broke knox and want secure folder back, try this https://forum.xda-developers.com/apps/magisk/module-smali-patcher-0-7-t3680053
Please come back and tell us if it worked! (I didn't make it to work on my debloated rom)
Thanks @marky_p for writing instructions on how to install
What is working:
Everything except samsung encryption, and any <8.1 rom
Built with P580KXU1CRJ7 source, on minimal manifest twrp, android-8.1.
Sources available:
Device tree: https://github.com/unknowwiiplayer/android_device_samsung_gtanotexlwifi
Kernel: https://github.com/unknowwiiplayer/kernel_samsung_exynos7870
Instructions on how to build are on device tree's readme.md
Now please powerful devs, bring lineage 17 to us, please!!!
Reserved, because reasons
I love you ? I will test it asap on the P580!
Dang, the touch bug ist still there
Thanks very much for your work. I'll test it on my P585Y. Hope you can port android 9/10 oneui rom and lineageOs for these devices too.
I've tested twrp on my Tab A P585Y. It worked but sometimes touch is laggy and cannot do swipe action. Thanks very much for your work. Hope the next version better
Installed it on my P580 has all touch problems That plagued all the other TWRPs for this tablet. So I guess I wrong about The fact all the other versions were based off of the android Marshmallow source code as being the cause of that. That set aside it seems to work great with Oreo!!! Greatjob!!!
Installed it on my P580 has all touch problems That plagued all the other TWRPs for this tablet. So I guess I wrong about The fact all the other versions were based off of the android Marshmallow source code as being the cause of that. That set aside it seem to work great with Oreo!!! Greatjob!!!
Thanks a lot
i tried flashing first time round on P585y
Twrp - worked fine - bit buggy/laggy on the swipe
flashed No Verity Opt Encrypt 6.1
then got stuck in this endless loop of booting - wouldnt even get to the samsung screen (still have access to download mode and recovery mode usning the associated button combination)
so i re-flashed stock firmware
re-flashed twrp
flashed supersu
again got stuck in the same endless boot loop......
any help how can i solve this?
Tried again tonight after flashing firmware ,
exact steps
Developer Options unlock Oem and allow USB Debbugging
reboot download mode
install SuperSU using ZIP (actually RAR file... would this make difference?)
went back to TWRP home menu
Reboot System.... STUCK in BOOT LOOP (doesnt even get to Samsung section - only gets to "Samsung Galaxy Tab A6 with S PEN powered by Android Page")
have waited 7 minutes now - still suck...
am i doing something wrong? is it because im using a P585y (lTE model)
i have noticed some unable to mount /data errors at times.
do i need wipe? clear cache/davlik? if so when in the process.
@unknowwiiplayer
on which stock firmware are you trying you do this?
HELP
unknowwiiplayer said:
on which stock firmware are you trying you do this?
Click to expand...
Click to collapse
Hey im using oreo 8.1
the name of the file is
P585YDXU2CRK5_P585YOLB2CRK5_XSP
if you can recommend other firmware that would work on my p585y and still give me the same functionality im easy, i dont need the LTE functionality
ANTYYY said:
Hey im using oreo 8.1
the name of the file is
P585YDXU2CRK5_P585YOLB2CRK5_XSP
if you can recommend other firmware that would work on my p585y and still give me the same functionality im easy, i dont need the LTE functionality
Click to expand...
Click to collapse
I'm using p585y, but i dont see that error on my device. I think you should flash the latest firmware then flash twrp again.
---------- Post added at 18:02 ---------- Previous post was at 18:00 ----------
@unknowwiiplayer Do you have a plan porting oneUi ROM for these tablet? ??
Tung Lam said:
I'm using p585y, but i dont see that error on my device. I think you should flash the latest firmware then flash twrp again.
---------- Post added at 18:02 ---------- Previous post was at 18:00 ----------
@unknowwiiplayer Do you have a plan porting oneUi ROM for these tablet? ??
Click to expand...
Click to collapse
Actually no, I hate OneUI, for me the current firmware is the pinnacle of Samsung experience, sorry
I do have some plans but I'm big noob and college will kill me if I focus on developing a ROM now :c
Okay, so I have SM P580 running 8.1. I can flash TWRP fine, but cannot flash anything after that without a bunch of errors!?!?
Thanks...
Azuma73 said:
Okay, so I have SM P580 running 8.1. I can flash TWRP fine, but cannot flash anything after that without a bunch of errors!?!?
Thanks...
Click to expand...
Click to collapse
did you format data?
ANTYYY said:
Hey im using oreo 8.1
the name of the file is
P585YDXU2CRK5_P585YOLB2CRK5_XSP
if you can recommend other firmware that would work on my p585y and still give me the same functionality im easy, i dont need the LTE functionality
Click to expand...
Click to collapse
I think that I'd have to build it again for your model using the latest kernel sources for your device, but for now I'm busy with college's online classes
I left instructions on my github sources, you can give it a try on building your own TWRP, as I don't have your device, I cannot ensure that if I biuld it will work, but it should tho
unknowwiiplayer said:
did you format data?
Click to expand...
Click to collapse
Yes… was I not supposed to?
Also, could anyone direct me to the correct files to root this thing... enlighten me as to the process? I can't find any working info on it!?!?
Sorry to ask, but I'm new to this tablet(sm p580) & it is quite frustrating TBH.
Thanks guys...
… crickets up in here
Azuma73 said:
Yes… was I not supposed to?
Also, could anyone direct me to the correct files to root this thing... enlighten me as to the process? I can't find any working info on it!?!?
Sorry to ask, but I'm new to this tablet(sm p580) & it is quite frustrating TBH.
Thanks guys...
… crickets up in here
Click to expand...
Click to collapse
did you wipe or did you format?, post some screenshots of the error, that way helping is a lot easier
unknowwiiplayer said:
did you wipe or did you format?, post some screenshots of the error, that way helping is a lot easier
Click to expand...
Click to collapse
I did format, then flash dm verity thing… got a bunch of errors. I'll recreate & get screens.
Could you direct me to files needed to try & root this thing?
Any help is appreciated… oops on that unrelated pic