Just got an E10a off eBay and PC Companion would only update it to 2.0.1.A.0.47. I think I need 2.1.1 and a specific baseband to flash CM, but I can't use a E10i 2.1.1 FTF or I will lose the 3G connection.
I just wanted to verify, from my reading here, that if I wanted to flash miniCM10 I should flash chavito's E10a rom with the appropriate baseband (http://forum.xda-developers.com/showthread.php?t=1294579) then unlock the bootloader and flash after that?
trowakage said:
Just got an E10a off eBay and PC Companion would only update it to 2.0.1.A.0.47. I think I need 2.1.1 and a specific baseband to flash CM, but I can't use a E10i 2.1.1 FTF or I will lose the 3G connection.
I just wanted to verify, from my reading here, that if I wanted to flash miniCM10 I should flash chavito's E10a rom with the appropriate baseband (http://forum.xda-developers.com/showthread.php?t=1294579) then unlock the bootloader and flash after that?
Click to expand...
Click to collapse
Yes, and make sure your phone isn't locked to a provider, the bootloader unlock may disable the entire radiochip (2G/3G). You can unlock the bootloader, boot into the ROM and see if you get signal, if you don't you have to lock the bootloader again.
(If you play with flashtool, DELETE the10blrelock.ftf from the flashtool/firmware folder, it will hardbrick your phone if flashed accidentally)
Thanks for the quick reply! Carrier unlocking is the other question I have. I've tried a couple of places to get the IMEI-based unlock code, but none of them can find it. So I'm thinking of getting a USB unlock from this place:
https://www.fastgsm.com/en/sonyericsson/xperia-x10-mini-e10i/unlock-network/flashing-debrand
It says that it will carrier unlock AND unlock the bootloader as well. So I should use that unlock service after I flash chavito's ROM but before I flash miniCM10?
trowakage said:
Thanks for the quick reply! Carrier unlocking is the other question I have. I've tried a couple of places to get the IMEI-based unlock code, but none of them can find it. So I'm thinking of getting a USB unlock from this place:
https://www.fastgsm.com/en/sonyericsson/xperia-x10-mini-e10i/unlock-network/flashing-debrand
It says that it will carrier unlock AND unlock the bootloader as well. So I should use that unlock service after I flash chavito's ROM but before I flash miniCM10?
Click to expand...
Click to collapse
I don't know if your phone is locked to a provider, or which one if it is. The site you refer to says it can only do it for a limited number of countries and providers, but it don't list which ones up front, so be careful with that. If sim-cards from different providers work on your phone, just skip that and unlock the bootloader using flashtool. But yes, you should first flash that latest firmware before you unlock the bootloader.
Related
Hi all.
I need/want to bootloader unlock my friends X10 that is (currently) running the latest stock firmware. It is currently running 3.0.1.G.0.75 Orange UK branded firmware, but by the time Im done with ready for flashing kernels and ROMs, it will be running 3.0.1.G.0.75 generic UK (either by editing the build.prop or flashing it with flashtool should multiupload.com suddenly become online again - but thats minor details as far as I can tell)
Unfortunately when my friend brought the phone, it was SIM locked (to orange as far as Im aware (its a white one and "supposed" to be "orange exclusive")) so I have unlocked it using Omnius as my friend uses O2.
After discovering how much nicer my X10 Mini Pro is with a custom ROM on it, he too has decided to take to the custom ROM route.
However, most of the ROMs now appear to rely on a custom kernel or an unlocked bootloader for obvious reasons.
I have installed the latest flashtool (Flashtool version 0.6.7.0), and noticed about the "plugins>unlock bootloader" . Even more curious, I decided to open the folder where it is installed, and noticed in the custom\features\UnlockBL\files\qsd8250 directory, there is a file called qsd8250bootwrite_omniusSL (along with setool's and SEMC's ones obviously) and what appears to be various scripts, which I assume checks for the type of certificate, then flashes what it needs to the phone.
My main questions are:
1 If I unlock using flashtool, would the radio signals stop working?
2 Will this affect the unlock status of the phone? Example: http://forum.xda-developers.com/showpost.php?p=19322815&postcount=224
I have tried searching for just about anything to do with omnius and bootloader unlocking, but only to find that Ive gotten lost in so many threads saying different things, Im not sure what to believe any more
I know this is for a different chipset (well, its a different phone) but just a taste of what I have found out:
http://www.gsmcure.com/forum/showthread.php?t=2505
http://forum.xda-developers.com/showthread.php?t=1254225
http://forum.xda-developers.com/showthread.php?t=1401010
http://forum.xda-developers.com/showthread.php?p=19685019
http://forum.xda-developers.com/showthread.php?t=1254087
hey i have the same problem..unlocked using omnius but when i do run the unlockBL it just says the warn: something something unidentified aborting process. and aborts
I also have this question
SilverMindPL said:
I also have this question
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19685019&postcount=7
check this post
download s1tool and check whether you can unlock your bootloader or not
cchaos said:
I need/want to bootloader unlock my friends X10 that is (currently) running the latest stock firmware.
Click to expand...
Click to collapse
Almost a year later, and the phone now being mine (and Ive got plenty of spare phones), I decided to take a "risk" on the above phone using Flashtool version 0.9.10.1:
cchaos said:
1 If I unlock using flashtool, would the radio signals stop working?
2 Will this affect the unlock status of the phone? Example: http://forum.xda-developers.com/showpost.php?p=19322815&postcount=224
I have tried searching for just about anything to do with omnius and bootloader unlocking, but only to find that Ive gotten lost in so many threads saying different things, Im not sure what to believe any more
Click to expand...
Click to collapse
1 Its unlocked the bootloader fine as far as I can tell; I havent actually installed a custom kernel (or a custom ROM for that matter) yet as I have yet to choose one - and yes I know theres a custom kernel already in flashtool. I dont seem to have any problems with signal on the phone using the stock firmware.
2 Phone seems to have kept unlocked. However at the moment I dont have another SIM to test it with, but the service menu certainly suggests that it hasnt lost its unlock.
Hope this helps someone else!
I'd like to confirm that if you SIM unlock with Omnius, you should definitely BLU with the latest Flashtool since it is compatible with Omnius. If you try any other BLU method (SEMC, Setool2), you WILL lose radio and the only way to get radio back is to SIM unlock with Omnius again.
Since then, I have been able to flash stock and custom ROMs/kernels successfully, while maintaining a working radio.
I have read around but found no answer..
Some say its impossible some say its possible can some one tell me for sure if its possible and if it is how would I do it?
And in the service menu it says "Bootloader unlock allowed: No"
used the GENERIC rom 042
Bootloader unlock allowed: YES
and use omnius
Lasy said:
used the GENERIC rom 042
Bootloader unlock allowed: YES
and use omnius
Click to expand...
Click to collapse
And how do i do that..
To flash other ROM, you can try WotanServer or Flashtool, last one requires correct files, WotanServer needs, that you only pick, which version of firmware you want(and free account).
Someguyfromhell said:
To flash other ROM, you can try WotanServer or Flashtool, last one requires correct files, WotanServer needs, that you only pick, which version of firmware you want(and free account).
Click to expand...
Click to collapse
And i can do all that on stock mini?
Halv said:
And i can do all that on stock mini?
Click to expand...
Click to collapse
Yes you can do it in stock with Wotan server but take into account that this process only changes the firmware version you are on for a generic one from se maybe a newer one but nothing more after this you still won't be able to flash custom kernels or roms unless you unlock your bootloader and fast boot.
You can try the unofficial way for the bootloader and it might work I cannot warranty it but it will not be that good as most of the roms need they own kernels and you will need access to fastboot mode to do that, unfortunately you need to completely unlock your phone either with omnius or setool to gain access to fastboot and this will cost you some money.
How can flashing that 042rom allow bootloader unlocking??
Just for the hell of it, i flashed my mini pro with that rom and it has not let me unlock the bootloader at all so im a little confused here
Seansmit17 said:
How can flashing that 042rom allow bootloader unlocking??
Just for the hell of it, i flashed my mini pro with that rom and it has not let me unlock the bootloader at all so im a little confused here
Click to expand...
Click to collapse
Man that is why I hate when people just write for the like of it!!! @ seansmit17 this is not with you I hope you know what I mean.
If you have the message unlock bootloader allowed: no; then it means your phone is sim locked this will lock the fastboot mode too so you will not be able to flash a custom kernel unless you unlock the sim and fastboot mode (connecting the phone turned off and holding the volume up key to the computer = blue notification led with turned off screen and phone), the only means that I know off to unlock is either omnius or setool, this is for the sim and fastboot and it is not free.
For the bootloader you can use the test point method found in the development section, of course I can't guarantee it will work and of course this will NOT UNLOCK YOUR SIM OR FASTBOOT MODE BUT ONLY YOUR BOOTLOADER.
When you install a generic firm with Wotan server it is like a seus upgrade and nothing else well it will allow you to get the last upgrades when they come out due to a change in product code but that's it. The same with flashtool but without the change in product code.
Hope it helps.
Hello,
I am only user, so no detailed knowledge about Android. But I am able to read instruction, so I've flashed often ROMs and also Kernel without problems.
(BTW - nice forum - and thanks to all developers to give us the chance to modify mobile phone)
Last time after flashing CM7.22 + nAa-Kernel (I flashed without SIM inside) I had no GSM after inserting SIM-Card. All other functions works normally (in Stock-ROM only in flight mode - in normal mode it hangs).
After that I tried several things:
- PC Companion Repair - so flashing Stock ROM
- SEUS flashing Stock Rom
- Bootloader unlock
- Root again
- Other Kernel /ROMs
- Flashing Stock-ROM with bootloader
All time no GSM. Can I do anything else ? Can it be Software failure, or maybe random Hardware failure, happens just when I flashed....?
Has somebody an idea ? Or is it bricked ?
X10 MINI or MINI PRO?
Also, if your deviced was branded (I mean if it has some carrier's label on your phone or apps pre-installed) and supposing you unlock bootloader, the GSM gets disabled. When you flash stock, bootloader gets patched and you have GSM again, I think or you've lost it forever and you need to recover it with
Also please, post in the correct section, this is a Q/A thread.
A known quote from SpyderX
If the simlock certificate specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT RECOGNIZED SIMLOCK CERTIFICATE, or if you are sure you sim-unlocked your phone using Omnius, jump to step 3.
If the simlock certificate specified is NOT RECOGNIZED SIMLOCK CERTIFICATE, you can't unlock the bootloader of your phone. If you try, radio capability of your phone will be disabled (this has been reported to be untrue by a number of people who claim to have unlocked bootloader successfully with msm7227_semc.cmd).
Do note that the SIMLOCK certificate doesn't mean that you have/don't have a sim lock on your phone.
Click to expand...
Click to collapse
Note that radio capability is the GSM.
Refer to this guide for detailed info : http://forum.xda-developers.com/showthread.php?t=1254225
(Click thanks if you wish.. O )
Bootloader does NOT get locked when you flash back to stock. You have to re-lock it manually whhen on stock. I cannot guide you through this as i have never done it
Sent from my U20i using xda premium
Why is this in the DEV section and not Q&A?
move thread to q/a
sorry for wrong position of this question - can I (or somebody) move this thread to Q/A ? How can I do ?
regards Odiad
x10man said:
Bootloader does NOT get locked when you flash back to stock. You have to re-lock it manually whhen on stock. I cannot guide you through this as i have never done it
Sent from my U20i using xda premium
Click to expand...
Click to collapse
In fact, bootloader was never unlocked, it was backdoored patched, thus, when you flash stock the patch is replaced with stock "file" resulting a "bootloader lock".
Your argument is totally invalid. I had unlocked bootloader, flashed back to stock and bootloader was locked, I couldn't flash kernel. So I unlocked again.
I can confirm you are wrong, because I did many tests on bootloader locking/unlocking.
No offence,
Thank you.
leajian said:
In fact, bootloader was never unlocked, it was backdoored patched, thus, when you flash stock the patch is replaced with stock "file" resulting a "bootloader lock".
Your argument is totally invalid. I had unlocked bootloader, flashed back to stock and bootloader was locked, I couldn't flash kernel. So I unlocked again.
I can confirm you are wrong, because I did many tests on bootloader locking/unlocking.
No offence,
Thank you.
Click to expand...
Click to collapse
I don't meant to prolong this out of place thread, but..
How do you unlock your bootloader ? When I unlock it using flashtool, I never got mine locked again, even after flashing back to stock rom / kernel using flashtool or SEUS as well... I can just flash another kernel after SEUS-ing it, without the need to unlocking it again. .
How can your phone locked itself again ?
Sent from my U20i using XDA
StardustGeass said:
I don't meant to prolong this out of place thread, but..
How do you unlock your bootloader ? When I unlock it using flashtool, I never got mine locked again, even after flashing back to stock rom / kernel using flashtool or SEUS as well... I can just flash another kernel after SEUS-ing it, without the need to unlocking it again. .
How can your phone locked itself again ?
Sent from my U20i using XDA
Click to expand...
Click to collapse
I never used FlashTool for bootloader unlocking, always the old traditional way of patching bootlaoder with s1tools.
Unlocking with FlashTool might be the issue. I can't tell how to lock it again, I only know that this is due to FlashTool.
leajian said:
I never used FlashTool for bootloader unlocking, always the old traditional way of patching bootlaoder with s1tools.
Unlocking with FlashTool might be the issue. I can't tell how to lock it again, I only know that this is due to FlashTool.
Click to expand...
Click to collapse
But I use flashtool to unlock the bootloader......NO GSM PROBLEMS
Sent from my U20i using xda premium
Hi,
at first so good news - phone works - very good feeling to write this !!!
I posted my problem in Q/A-section (sorry again for posting my question here first).
Roughly explained I got hints - so I flashed Stock-ROM again, then I relocked bootloader with S1tool, and suddenly phone works correctly.
I don't know what and when I did a failure with the result of GSM failure. But problem is solved. So thanks to all who has tried to help.
Regards Odiad
leajian said:
In fact, bootloader was never unlocked, it was backdoored patched, thus, when you flash stock the patch is replaced with stock "file" resulting a "bootloader lock".
Your argument is totally invalid. I had unlocked bootloader, flashed back to stock and bootloader was locked, I couldn't flash kernel. So I unlocked again.
I can confirm you are wrong, because I did many tests on bootloader locking/unlocking.
No offence,
Thank you.
Click to expand...
Click to collapse
I used S1tool I a week after it was released for the MP flashed to stock using SEUS multiple times, never had to open s1tool again. Now on nAa 11 without ever having to re-unlock bl
Sent from my U20i using xda premium
do you unlocked bootloader?
Ok. I have searched for hours and hours with no result. I have a Sony Ericsson X10a ATT labeled phone. i got it booting to the Xperia logo and no further. I was able to get the global generic x10i rom flashed to it so it would at least boot into android. it does not have a signal and says the sim will not work with att network. what ive done:
Flashed Global generic x10i 2.1a rom with flashtool 0.8 (the only stock firmware link that works)
Rooted with flashtool
s1tool reports NOT RECOGNIZED SIMLOCK CERTIFICATE
Ive tried to force SPCC to flash stock rom
Update service says its up to date
I can get it into flashmode no problem, it does boot normally into android, i can get into recovery with cwm5
it has no signal as of now.
Flashtool reports it as rooted.
I need to get this thing at least back to stock and working with a north american at&t sim card. if i can get a custom rom, great, if not ill deal with stock. if its SOL, its going thru the chipper
my hat is off to developers and programmers but I can do without the "you should of done this or that." i really appreciate any help. i just need to get it working thanks in advance
itstheburns said:
Ok. I have searched for hours and hours with no result. I have a Sony Ericsson X10a ATT labeled phone. i got it booting to the Xperia logo and no further. I was able to get the global generic x10i rom flashed to it so it would at least boot into android. it does not have a signal and says the sim will not work with att network. what ive done:
Flashed Global generic x10i 2.1a rom with flashtool 0.8 (the only stock firmware link that works)
Rooted with flashtool
s1tool reports NOT RECOGNIZED SIMLOCK CERTIFICATE
Ive tried to force SPCC to flash stock rom
Update service says its up to date
I can get it into flashmode no problem, it does boot normally into android, i can get into recovery with cwm5
it has no signal as of now.
Flashtool reports it as rooted.
I need to get this thing at least back to stock and working with a north american at&t sim card. if i can get a custom rom, great, if not ill deal with stock. if its SOL, its going thru the chipper
my hat is off to developers and programmers but I can do without the "you should of done this or that." i really appreciate any help. i just need to get it working thanks in advance
Click to expand...
Click to collapse
did you try to unlock your bootloader ??
itstheburns said:
Ok. I have searched for hours and hours with no result. I have a Sony Ericsson X10a ATT labeled phone. i got it booting to the Xperia logo and no further. I was able to get the global generic x10i rom flashed to it so it would at least boot into android. it does not have a signal and says the sim will not work with att network. what ive done:
Flashed Global generic x10i 2.1a rom with flashtool 0.8 (the only stock firmware link that works)
Rooted with flashtool
s1tool reports NOT RECOGNIZED SIMLOCK CERTIFICATE
Ive tried to force SPCC to flash stock rom
Update service says its up to date
I can get it into flashmode no problem, it does boot normally into android, i can get into recovery with cwm5
it has no signal as of now.
Flashtool reports it as rooted.
I need to get this thing at least back to stock and working with a north american at&t sim card. if i can get a custom rom, great, if not ill deal with stock. if its SOL, its going thru the chipper
my hat is off to developers and programmers but I can do without the "you should of done this or that." i really appreciate any help. i just need to get it working thanks in advance
Click to expand...
Click to collapse
i think u should reinstall the stock firmware using the repair option in SEUS and then proceed with a proper tutorial
thinkDHRUVIL said:
i think u should reinstall the stock firmware using the repair option in SEUS and then proceed with a proper tutorial
Click to expand...
Click to collapse
I have tried with the same result, no software found for your device. i dont have an option to repair the phone with seus. i even tried spcc.
Yes, i used x10 bootloader unlock tool, says it was successful.
itstheburns said:
I have tried with the same result, no software found for your device. i dont have an option to repair the phone with seus. i even tried spcc.
Yes, i used x10 bootloader unlock tool, says it was successful.
Click to expand...
Click to collapse
Did you have a network locked phone? I mean locked to a specific network operator?
Sent from my X10i
THeLogiC said:
Did you have a network locked phone? I mean locked to a specific network operator?
Sent from my X10i
Click to expand...
Click to collapse
its an att phone, i want to use it on att network. i was able to flash a rom, but i cannot follow where to find a radio or baseband or whatever it is i need to get it to communicate with the network. i dont know if this was ever modded before i got it or unlocked or whatever was done to it
itstheburns said:
its an att phone, i want to use it on att network. i was able to flash a rom, but i cannot follow where to find a radio or baseband or whatever it is i need to get it to communicate with the network. i dont know if this was ever modded before i got it or unlocked or whatever was done to it
Click to expand...
Click to collapse
1) can you post your baseband and firmware you are using right now??
2) try relocking bootloader using flashtool and see if you get your signal back
THeLogiC said:
1) can you post your baseband and firmware you are using right now??
2) try relocking bootloader using flashtool and see if you get your signal back
Click to expand...
Click to collapse
ok baseband is 2.1.54 and i dont see a specific firmware version listed. i have kernal ver 2.6.29-fxp [email protected] #1
Sorry, im used to htc modding, so much easier
ill try relocking the bootloader now
itstheburns said:
ok baseband is 2.1.54 and i dont see a specific firmware version listed. i have kernal ver 2.6.29-fxp [email protected] #1
Sorry, im used to htc modding, so much easier
ill try relocking the baseband now
Click to expand...
Click to collapse
I guess you are on 2.1 firmware. So the baseband is right.
The only option is relocking bootloader via flashtool.
THeLogiC said:
I guess you are on 2.1 firmware. So the baseband is right.
The only option is relocking bootloader via flashtool.
Click to expand...
Click to collapse
yeah 2.1 update1 and again no luck. this is really irritating. i dont understand why this isnt connecting to the network. if i could get my hands on a stock rom that is exactly for this phone and carrier it should work but all the links are dead for the files i want
itstheburns said:
yeah 2.1 update1 and again no luck. this is really irritating. i dont understand why this isnt connecting to the network. if i could get my hands on a stock rom that is exactly for this phone and carrier it should work but all the links are dead for the files i want
Click to expand...
Click to collapse
the problem isnt the stock firmware.
I the problem is you tried to unlock bootloader for a sim locked phone and because of that it has messed up.
AS you have got NOT RECOGNIZED SIMLOCK CERTIFICATE in s1tool you shouldnt have tried to unlock bootloader,
I am sorry I have no other ideas for it.
I advise to contact in this thread.
http://forum.xda-developers.com/showthread.php?t=1322827&page=2
THeLogiC said:
the problem isnt the stock firmware.
I the problem is you tried to unlock bootloader for a sim locked phone and because of that it has messed up.
AS you have got NOT RECOGNIZED SIMLOCK CERTIFICATE in s1tool you shouldnt have tried to unlock bootloader,
I am sorry I have no other ideas for it.
I advise to contact in this thread.
http://forum.xda-developers.com/showthread.php?t=1322827&page=2
Click to expand...
Click to collapse
Thanks. I will try that. I was not aware of the sim certificate issue. when i got the phone, it didnt get service so i flashed it back to stock thinking it was an issue with the rom or radio. thanks for all of ur time and help!
itstheburns said:
Thanks. I will try that. I was not aware of the sim certificate issue. when i got the phone, it didnt get service so i flashed it back to stock thinking it was an issue with the rom or radio. thanks for all of ur time and help!
Click to expand...
Click to collapse
No problem.
If you have NOT RECOGNIZED SIMLOCK CERTIFICATE in s1tool then you shouldnt unlock bootloader. If u do so you lose your signal which cannot be recovered by usual flashing methods like going to stock.
HI guys, i need some helps here,
After i unlocked x10mini, cant connect to sim card, showing "No service"
What i should to do, Need to relock and update via PC Companion?
Speederoff said:
HI guys, i need some helps here,
After i unlocked x10mini, cant connect to sim card, showing "No service"
What i should to do, Need to relock and update via PC Companion?
Click to expand...
Click to collapse
Do it the ohter way round please if you've already flashed a custom kernel, go back to stock first through PC Companion and then relock the bootloader.
SmG67 said:
Do it the ohter way round please if you've already flashed a custom kernel, go back to stock first through PC Companion and then relock the bootloader.
Click to expand...
Click to collapse
Thanks for replying, safely back to Original firmware, Now i need to Unlock and able to flash Custom ROM? It will disable my connection again ? just wondering =.=".
Thx for helping me.
Speederoff said:
Thanks for replying, safely back to Original firmware, Now i need to Unlock and able to flash Custom ROM? It will disable my connection again ? just wondering =.=".
Thx for helping me.
Click to expand...
Click to collapse
I'm guessing relocking the bootloader helped then?
Do you have S1Tool? I'm curious about the output of the identify-button
Chances are unlocking your bootloader will disable your network again.
SmG67 said:
I'm guessing relocking the bootloader helped then?
Do you have S1Tool? I'm curious about the output of the identify-button
Chances are unlocking your bootloader will disable your network again.
Click to expand...
Click to collapse
Grrrrrrrrrr, so hate
How do you did Unlocking bootloader ? .. Using S1tool or some other stuff?
Speederoff said:
Grrrrrrrrrr, so hate
How do you did Unlocking bootloader ? .. Using S1tool or some other stuff?
Click to expand...
Click to collapse
There are three safe circumstances in which you can unlock your bootloader:
1: You bought your phone sim-unlocked, in which case it's got a simlock-certificate by sony-ericsson
2: You sim-unlock your phone using an unlock code from your carrier (emma/imei-code), usually free after your initial contract-period
3: You sim-unlocked your phone using Omnius (or something similar)
I just bought mine without a contract, it wasn't that expensive, about a year after they came out, so i've got no carrier lock-in, which is a bonus. Apart from that, sim-unlocking your phone using a code from your provider is the safest way to do things.
Flashtool will unlock your bootloader, but s1tool will give you the information you need to know if it's safe.
Speederoff said:
HI guys, i need some helps here,
After i unlocked x10mini, cant connect to sim card, showing "No service"
What i should to do, Need to relock and update via PC Companion?
Click to expand...
Click to collapse
Same with me. After i unlocked x10 mini pro, and then upgraded to ARCMINI ICS 4 (for mini pro),
It's showing no network. What should I do now? I want android 4.0.4 for my x10 mini pro. lol
SmG67 said:
There are three safe circumstances in which you can unlock your bootloader:
1: You bought your phone sim-unlocked, in which case it's got a simlock-certificate by sony-ericsson
2: You sim-unlock your phone using an unlock code from your carrier (emma/imei-code), usually free after your initial contract-period
3: You sim-unlocked your phone using Omnius (or something similar)
I just bought mine without a contract, it wasn't that expensive, about a year after they came out, so i've got no carrier lock-in, which is a bonus. Apart from that, sim-unlocking your phone using a code from your provider is the safest way to do things.
Flashtool will unlock your bootloader, but s1tool will give you the information you need to know if it's safe.
Click to expand...
Click to collapse
Omnius doesn't allow bootloader unlock after using it to SIM unlock. My phone is factory locked to T-Mobile UK and I've never unlocked it and my bootloader unlock was fine
X10man
Sent from my Fender Stratocaster to your face via XDA Premium