Hi guys, first of all sry for my bad eng
After flashing Omni Based Rom [June 28] ,PC recognized my p7510 as Unknown device. I make full wipe and try start, but tablet is not started :crying:
I try adb sideload, uninstall and install drivers but PC didn't sees my tab.
Help me please
My tab is dead, so help my pls guys:crying:
You can get Download or Recovery mode with the buttons Home,+ and -?
Yes I can get, but PC didnt see tablet
Try to connect to another PC with the installed drivers Samsung.
Replace the USB cable.
Flash any stock ROM from Recovery.
porcelana said:
Try to connect to another PC with the installed drivers Samsung.
Replace the USB cable.
Flash any stock ROM from Recovery.
Click to expand...
Click to collapse
I try this.
Cant flashing from Recovery, because not have any rom on sdcard:crying:
So i can throw my tab out the window?
Please help me:crying:
Try to connect your Tab to PC from the KIES program in a mode of emergency restoration of firmware for 2 cases:
1. When Tab is power on (a usual mode)
2. When Tab is power on n the Download mode
porcelana said:
Try to connect your Tab to PC from the KIES program in a mode of emergency restoration of firmware for 2 cases:
1. When Tab is power on (a usual mode)
2. When Tab is power on n the Download mode
Click to expand...
Click to collapse
Try this, Keis didnt sees my tab.
Thanks porcelana
CastorTroy.grl said:
Try this, Keis didnt sees my tab.
Click to expand...
Click to collapse
Check the connector of 30 pin on your Tab with a good magnifying glass. Probably it has damage of contacts and doesn't allow to have communication with PC (it is a typical problem of this connector).
Related
my phone freeze on the first screen with the galaxys2 logo and the yellow trigon...!!recovery mode mode dont work and when i am going in download mode the pc cant reccognice the phone..!!i have allready install the drivers...!!i want to install an official rom but odin cant see the phone.!!help
If you think you get working drivers installed, put your computer online, put your phone on download mode, plug the cable, and wait for it to install.
This is for windows 7, otherwise install the Samsung usb drivers again
Sent from my GT-I9100 using Tapatalk 2
pakoulinos said:
my phone freeze on the first screen with the galaxys2 logo and the yellow trigon...!!recovery mode mode dont work and when i am going in download mode the pc cant reccognice the phone..!!i have allready install the drivers...!!i want to install an official rom but odin cant see the phone.!!help
Click to expand...
Click to collapse
That's hard.
If you do not get the PC recognize your phone in download mode, you have a real problem.
Try another USB port and cable.
Try to connect your phone to another PC.
Maybe you have to give it to a service center for repair.
Is your phone already out of warranty?
I had a similar problem where it freezes on that screen.
My problem was I installed an ICS rom with old version kernel.
Once I installed the latest CF-Root the boot was successful.
If Odin can't see your phone and you can still go into Download mode, I would check to make sure that Kies is not open and no Kies process is live (Task Manager / Processes), I think it's call "KiesTrayAgent", just kill the process and any process that has a Kies word in it.
Otherwise try another PC.
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!! (still have SuperSU app but doesnt work or gets uninstalled)
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!! Downloaded latest Kies and had it closed from task manager and all its related apps off too but Still odin wont recognize it in download mode!! been tryin since i did the Darn UPDATE! PLZ HELP :S
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
JJEgan said:
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Try Odin 3.04
sent from here, there, somewhere!!
Click to expand...
Click to collapse
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Plz Respond someone....
Click to expand...
Click to collapse
THAnks!!!!!!!!!!! Shifting usb to back of computer worked!!! U SAVIOURS THANKS A LOTT!!!!
Galaxy S3 not being recognized in odin in download mode
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Issues with usb on s3
Actually fixed my own Question....
My phone was in download mode and was not being recognized by my computer my windows 7 computer. I pressed the usb icon, where a box popped up saying that there was an unknown device. You could find this in device manager.
I then went to device manager to update the driver instead of pointing the device directly to the driver when i clicked browse my computer for software then it shows a location and option to let me pick from a list of device drivers on my computer then a box pops up showing model above that there is a little check box uncheck that two boxes will appear with manufacturer and model
Scroll samsung electronics and model samsung mobile composite device that is what you want to update the driver to...
I pulled the battery then re-entered download mode and windows to over installing the rest now it works fine. I would attach images but it will not let me for some reason. if anyone can help with that I will do it later.
THIS COULD POSSIBLY help with devices not being found on computers in bootloader or just on rom loaded and running..
Skywatcher1 said:
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Click to expand...
Click to collapse
have you got the necessary drivers also you need to stop all kies activities.
uable to see added message inn download mode
tian105 said:
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
uable to see added message inn download mode!!!!!!!!!!
Please help
Maybe solved it
Hey guys, i know it's a bit late now, but i had exactly the same problem with my gt-i9300 (got stuck on samsung splash screen and odin didn't recognize it in download mode) and just realised that everytime, i connected my phone to my PC in download mode, a message would appear that "Gadget Device" (or something like that) was connected. Then i searched in my device manager for the name of it (i found it under USB-Devices) and uninstalled the driver of it. As i connected it again with odin started it would install the driver automatically and *swoosh* odin recognized it.
A year and some later after the last post and I seem to be having this problem as well... I believe it was due to a bad flash at very low battery level which ended up in encryption failure ya da da, factory reset, clear/format everything and flash custom rom from SD because any other connection would not work.... then managed to get windows (many flavors inc. 7, 8 and 10) to connect as MTP or in USB debugging mode but Odin mode (download) just won't do anything... i put the phone in DL mode, nothing happens, no windows connection sounds, no changes in devices manager, even when searching for new hardware. I'd be very interested to know if anyone has had anything like that. I'd really like to flash stock to go back to a custom rom, flash twrp to replace cwm but all seems to no avail if i can't get a connection while in DL mode.
tried to install adb fastboot but also nada since no connection is being made.... might be something with DL mode gone awry with the bad flash... long story but OTA update from current ROM decided on its own to push update even though battery was at 5% and no user interaction ever happened...
we'll see what happens...
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Are you using the original Samsung USB cable when the phone is in download mode?
romeeoo said:
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Click to expand...
Click to collapse
Driver issue. Find the correct drivers.
Beamed in by telepathy.
my pc cannot detect my phone
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Solution!
paluswitch said:
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Click to expand...
Click to collapse
dear friend already tried to set up a stock deodex via recovery? it avoids using Odin and will be able to install the drivers on your laptop with your connected device!
:good:
paluswitch said:
i've already flash cwm a long time ago, after that i restore the official firmware using a pc at cyber cafe. then yesterday i tried to flash custom rom and my phone stuck at samsung grand logo. i've install samsung kies inside my laptop but it didnt detect my phone because it is my first time connecting my phone to my laptop. can someone help tell me how to make my laptp detect my phone. my phone can enter download mode but didnt detected by lptop.
Click to expand...
Click to collapse
Simply download driver for samsung gti8552 and install it on the computer/laptop in which you want to connect your device for modifications/fixing.
Here is the link for the driver---> CLICK HERE
Let me know for further assistance. Thanks
Just remove your phone battery ,sim etc . then wait for few seconds and boot to recovery or download mode by only battery not with sim and sd try if this works
This happened with me then solved by this method
akky26 said:
Simply download driver for samsung gti8552 and install it on the computer/laptop in which you want to connect your device for modifications/fixing.
Here is the link for the driver---> CLICK HERE
Let me know for further assistance. Thanks
Click to expand...
Click to collapse
Your link doesnt work. And after connecting whats next?
Stiffymeister said:
Your link doesnt work. And after connecting whats next?
Click to expand...
Click to collapse
After connecting select pda and put desired rom file. And start flying
Hello everyone, i need help.
I have tried to root samsung galaxy s3. I was using Odin and it failed :/
Now i can only enter download mode on phone but my PC doesn't detect phone at all. I will try tomorrow other PC and other USB cable, but do you guys have any advice that can help me?
I have installed fresh Win 7, USB drivers and i have tried few versions of Odin and Kies too (it doesn't detect phone either).
emirm990 said:
Hello everyone, i need help.
I have tried to root samsung galaxy s3. I was using Odin and it failed :/
Now i can only enter download mode on phone but my PC doesn't detect phone at all. I will try tomorrow other PC and other USB cable, but do you guys have any advice that can help me?
I have installed fresh Win 7, USB drivers and i have tried few versions of Odin and Kies too (it doesn't detect phone either).
Click to expand...
Click to collapse
If download mode works , then the problem is the usb cable or the samsung driver on the PC , here is the lastest driver , If ODIN 3.10.7 detects the device try to flash TWRP-3.0.2-0 TAR as AP , if it worked reboot in recovery and the rest is up to you witch rom you gonna flash , note this is for custom roms only like CyanogenMod
Thank mate Installed TWRP and CM13, everyhing works well Changed USB cable and managed to get phone detected, quality USB cable makes difference.
If download mode works , then the problem is the usb cable or the samsung driver on the PC , here is the lastest driver , If ODIN 3.10.7 detects the device try to flash TWRP-3.0.2-0 TAR as AP , if it worked reboot in recovery and the rest is up to you witch rom you gonna flash , note this is for custom roms only like CyanogenMod
Click to expand...
Click to collapse
Hi, I have a similar situation, no power, no charge, no download mode, I even connect the USB jig and nothing. Everything happened when trying to restore boot with CWM. After reboot the phone went to hard brick state
jeanca223 said:
Hi, I have a similar situation, no power, no charge, no download mode, I even connect the USB jig and nothing. Everything happened when trying to restore boot with CWM. After reboot the phone went to hard brick state
Click to expand...
Click to collapse
Well the battery is discharged , that's why it doesn't boot , There must be something wrong or with the charger or with the usb cable , most of the time is the cable , after you manage to boot , try to flash TWRP instead CWM
rpdroky said:
Well the battery is discharged , that's why it doesn't boot , There must be something wrong or with the charger or with the usb cable , most of the time is the cable , after you manage to boot , try to flash TWRP instead CWM
Click to expand...
Click to collapse
Thanks for your prompt reply.
I tested the cable and charger in other phones and they work fine. In the other hand the S3 was at 30% by the time I restarted it and never came back to life. Also when I connect it to the PC there is no sign of the S3 on the device manager.
jeanca223 said:
Thanks for your prompt reply.
I tested the cable and charger in other phones and they work fine. In the other hand the S3 was at 30% by the time I restarted it and never came back to life. Also when I connect it to the PC there is no sign of the S3 on the device manager.
Click to expand...
Click to collapse
Try cleaning the S3 usb port , sometimes stuff gets in there and the pin's aren't connecting propedly
Hi im trying to go back to stock firmware but my computer dont recognize my phone when it is in download mode i have the drivers installed and Samsung Kies and i have tried different cables and ports but it's not being recognized for some reason i need help
Try different USB port. And try to pull the battery out and drain all power by holding power key for a minute. Sometimes it helps expecially if u running 5.0 or higher
jpjezzy16 said:
Hi im trying to go back to stock firmware but my computer dont recognize my phone when it is in download mode i have the drivers installed and Samsung Kies and i have tried different cables and ports but it's not being recognized for some reason i need help
Click to expand...
Click to collapse
Did to check in device manager to see if it is not recognized?
It may be, but the driver isn't applied to the device